Electronics

Der Multiplus-II 48/5000/70-50 von Victron Energy ist eine High-End Gerätekombination, welche die klassische Multiplus-Komponenten mit einem externen Stromsensor und integrierter Anti-Islanding Funktion verbindet. Dadurch werden die Funktionen PowerControl und PowerAssist auf 100 A erweitert und der potenzielle Einsatzbereich auf ESS-Anwendungen ausgedehnt. Das Wechselrichter Modul leistet bei nicht linearer Belastung satte 5000 W, bzw. 4000 W bei linearer Dauerbelastung. Auch das 48 V Batterieladegerät ist mit 70 A Ladeleistung sehr gut proportioniert und wird durch einen 50 A Transferschalter ergänzt, mit dem sich blitzschnell zwischen den AC-Anschlüssen hin- und herschalten lässt. wichtige Leistungsmerkmale- PowerControl und PowerAssist –Steigerung von Netz-oder Generator-Leistung- eingebaute Anti-Islanding-Funktion und Anschlussmöglichkeit für externen Stromsensor (optional)- kann als Backupgerät in netzgekoppelten Anlagen eingesetzt für die Stromversorgung bei Netzausfällen- einsetzbar in verschiedenen ESS (Energy Storage System) Anwendungen- bestens geeignet für die professionelle Seefahrt, Yachten, Fahrzeuge und landgebundene, netzferne Anwendungen- VE.Bus Schnittstelle für Parallel-und Drei-Phasen-Betrieb, Fernüberwachung und Systemintegration- praktisch unbegrenzte Leistung durch Parallel-und Drei-Phasen-Betrieb- kann vor Ort oder aus der Ferne mittels VEConfigure Software konfiguriert werdentechnische Merkmale- 5000 W Leistung bei nicht linearer Belastung 4000 W Dauerbelastung und 9000 W Spitzenleistung- für 48 V Batteriespannung, 50 A Transfer-Schalter und 70 A Batterieladegerät- Ausgangsspannung: 230 VAC, Frequenz: 50 Hz- max. Wirkungsgrad liegt bei 95%, Schutzklasse IP22immer genug Power dank PowerControl und PowerAssistAm Multiplus-II 48/5000/70-50 kann ein maximaler Netz- oder Generatorstrom eingestellt werden. Das MultiPlus-II nimmt dann Rücksicht auf weitere angeschlossene Wechselstromverbraucher und nutzt zum Laden der Batterie nur den Strom, der noch „übrig“ ist. So wird verhindert, dass der Generator- oder der Netzanschluss überlastet wird (PowerControl-Funktion). Mit der Funktion PowerAssist erhält das PowerControl-Prinzip eine neue Dimension. Lastspitzen treten häufig nur für einen begrenzten Zeitraum auf. In einem solchen Fall kompensiert das MultiPlus-II zu schwache Generator-, Landstrom- bzw. Netzleistung sofort durch Energie aus der Batterie. Wird die Last reduziert, d. h. werden Verbraucher ausgeschaltet, kann die dann wieder ausreichend vorhandene Energie zum Laden der Batterien genutzt werden. Solarstrom: Wechselstrom auch bei NetzausfallDas Gerät kann sowohl bei nicht netzgekoppelten sowie bei netzgekoppelten PV-Anlagen als auch bei anderen alternativen Energiesystemen eingesetzt werden. Es lässt sich sowohl mit Solar-Lade-Reglern als auch mit netzgebundenen Wechselrichtern verwenden. maximale Flexibilität dank zweier WechselstromausgängeDer Hauptausgang stellt einen unterbrechungsfreien Betrieb sicher. Im Falle eines Netzausfalls oder bei einer Unterbrechung des Land-/Generatorstroms übernimmt das MultiPlus-II die Versorgung der angeschlossenen Verbraucher. Die Umschaltung geschieht so schnell (in weniger als 20 Millisekunden), dass ein unterbrechungsfreier Betrieb von Computern und anderen elektronischen Geräten gewährleistet ist. Der zweite Ausgang liefert nur dann Strom, wenn am Eingang des MultiPlus-II Wechselstrom verfügbar ist. Verbraucher, die die Batterie nicht entladen dürfen, wie z. B. ein Wassererhitzer, können an diesen Ausgang angeschlossen werden. viele Möglichkeiten zur SystemerweiterungDie Einstellungen lassen sich mit der VEConfigure Software binnen weniger Minuten ändern (es ist dafür ein Computer oder Laptop und ein MK3-USB-Interface notwendig).Es stehen mehrere Überwachungs- und Steuerungs-Optionen zur Verfügung: Color Control GX, Venus GX, Octo GX, CANvu GX, Laptop, Computer, Bluetooth (mit dem optionalen VE.Bus Smart Dongle), Batterie-Wächter, Digital Multi Bedien-Paneel. Konfiguration und Überwachung aus der FerneInstallieren Sie ein Color Control GX oder andere GX-Produkte, um sich mit dem Internet zu verbinden. Die Betriebs Daten lassen sich auf unserer VRM (Victron Remote Management) Website kostenlos speichern und einsehen. Sind Systeme an das Internet angeschlossen, kann auf sie aus der Ferne zugegriffen und Einstellungen können geändert werden.

The Cerbo GX Communication Center from Victron Energy (MPN BPP900450100) enables perfect control over your system and maximizes its performance. The latest device of the Victron GX series scores with regard to connectivity and intelligent power supply. Maximizing the system performance has never been so easy. Easy monitoring and control With the Cerbo GX you can monitor the charging status of the battery, power consumption, energy generation from PV, generator and network. It is also possible to check tank filling levels and temperature measurements. Simply control the current limitation for country electricity feed, the (automatic) start/stop generator or change any settings to optimize the system. Follow warning messages, carry out diagnostic tests and solve problems from afar. Properties of the Cerbo GX communication center Easy control of your system Flexible connection options Maximizing your system performance Uncomplicated assembly Available connections 4 tank connections 4 temperature connections 3 Ve.direct ports 3 USB ports 4 digital inputs 2 relays Flexible connection options The system control by the Cerbo GX communication center is possible regardless of location and time. The device offers three different options for connection. Either via the free Victron Remote Management (VRM) Portal, the Victron Energy GX Touch 50 (5-inch touchscreen display) or via the VictronConnect app via Bluetooth. Scope of delivery: Cerbo GX deviceNetwork cable with inline protection and M8 connection eyes for battery or DC collection rail fastening.Ve.can final resistors (2 pieces)Termed blocks for all connections on each side data sheet Generally:   Manufacturer part number BPP900450100 Product System control display Manufacturer Victron Energy Weight 0.6 kg EAN 8719076048763

Votronic battery charging booster for motorhomes 12V / 30A Optimized charging characteristics for acid, gel, AGM and LIFEPO4 batteries High performance on short driving routes Votronic Products "" Made in Germany "" Charging booster, optimal load even on short lines The Votronic Lade Booster guarantee the optimal and quick load of the supply battery from the alternator while driving. In contrast to the simple separation relay, the charging voltage is raised to the value, which is necessary for the respective battery type for a full load and required by the battery manufacturers. In this way, the full charging current can flow and in a short time invite handsome amounts of electricity into the battery. Long charging lines and losses, as well as voltage fluctuations on the alternator, are cleaned cleanly. The Votronic loading technology has been used in professional emergency vehicles such as fire brigade, ambulance, coast guard for years! Quality - Made in Germany! The loading converters thus also provide the well-known high-quality quality of the battery charge of the Votronic chargers while driving. The intelligent microprocessor charging with "iU1ou2" charging characteristics and dynamic charging time calculation automatically ensures the fast and gentle full load as well as subsequent loading of the connected batteries from any state of charge and always enables simultaneous co-supply of consumers to the supply battery. Further special features at a glance: Votronic Products "" Made in Germany "" High charging capacity already on short routes Significantly improved energy balance of the on -board battery Optimal charging characteristics for all battery types adjustable by battery selection switches (lead-acid, gel, AGM, lithium lifepo4) Suitable for all alternators Automatic, adjustable performance control ensures the priority loading of the starter battery by the alternator when the vehicle is heavily loaded and thus ensures the immediate starting capacity of the vehicle again Easy installation, no interventions in the vehicle of the vehicle required, device is switched into the charging line to the supply battery Parallel operation for the increase in performance possible Especially recommended for vehicles with Euro 6 standard Temperature sensor 825 already included The loading converters are also characterized by compact design, low weight (high -frequency switching transmission, switch fashion technology) and vigorously dimensioned power components. 6 Operating advertisements provide information about the operating status of the device at any time. As accessories we recommend the clear LCD Charge Control S-VCC (1248). With this you always have information about loading, the display was developed exclusively for the VCC 1212 device series. Scope of delivery:- Votronic 3324 VCC 1212-30 12V to 12V 30A B2B charging converter- temperature sensor- Operation manual  Technical specifications VCC-1212-30 Input voltage (DC) 12V (10.5 - 16.5V) Charging performance adjustable limit, max. 30a Battery type Gel, AGM, lead acid, lifepo4 Steplessly temperature -controlled fan Yes Temperature sensor included Yes Connections remote control, display / VBS2 / CI bus Yes / no / no Overload protection / over -temperature protection Yes / Yes Battery capacity, recommended/up to 60-200/260 Ah Dimensions 146 x 67 x 40mm Weight 0.28 kg "

Der Multiplus-II 48/3000/35-32 ist eine High-End Gerätekombination von Victron Energy die klassische Multiplus-Komponenten mit einem externen Stromsensor und integrierter Anti-Islanding Funktion verbindet. Dadurch werden die Funktionen PowerControl und PowerAssist auf 50 A erweitert und der potenzielle Einsatzbereich auf ESS-Anwendungen ausgedehnt. Das Wechselrichter Modul leistet bei nicht linearer Belastung satte 3000 W, bzw. 2400 W bei linearer Dauerbelastung. Auch das 48 V Batterieladegerät ist mit 35 A Ladeleistung sehr gut proportioniert und wird durch einen 32 A Transferschalter ergänzt, mit dem sich blitzschnell zwischen den AC-Anschlüssen hin- und herschalten lässt. wichtige Leistungsmerkmale- PowerControl und PowerAssist –Steigerung von Netz-oder Generator-Leistung- eingebaute Anti-Islanding-Funktion und Anschlussmöglichkeit für externen Stromsensor (optional)- kann als Backupgerät in netzgekoppelten Anlagen eingesetzt für die Stromversorgung bei Netzausfällen- einsetzbar in verschiedenen ESS (Energy Storage System) Anwendungen- bestens geeignet für die professionelle Seefahrt, Yachten, Fahrzeuge und landgebundene, netzferne Anwendungen- VE.Bus Schnittstelle für Parallel-und Drei-Phasen-Betrieb, Fernüberwachung und Systemintegration- praktisch unbegrenzte Leistung durch Parallel-und Drei-Phasen-Betrieb- kann vor Ort oder aus der Ferne mittels VEConfigure Software konfiguriert werdentechnische Merkmale- 3000W Leistung bei nicht linearer Belastung 2400 W Dauerbelastung und 6000 W Spitzenleistung- für 48 V Batteriespannung, 32 A Transfer-Schalter und 35 A Batterieladegerät- Ausgangsspannung: 230 VAC, Frequenz: 50 Hz- max. Wirkungsgrad liegt bei 95%, Schutzklasse IP22- immer genug Power dank PowerControl und PowerAssist Am Multiplus-II 48/3000/35-32 kann ein maximaler Netz- oder Generatorstrom eingestellt werden. Das MultiPlus-II nimmt dann Rücksicht auf weitere angeschlossene Wechselstromverbraucher und nutzt zum Laden der Batterie nur den Strom, der noch „übrig“ ist. So wird verhindert, dass der Generator- oder der Netzanschluss überlastet wird (PowerControl-Funktion). Mit der Funktion PowerAssist erhält das PowerControl-Prinzip eine neue Dimension. Lastspitzen treten häufig nur für einen begrenzten Zeitraum auf. In einem solchen Fall kompensiert das MultiPlus-II zu schwache Generator-, Landstrom- bzw. Netzleistung sofort durch Energie aus der Batterie. Wird die Last reduziert, d. h. werden Verbraucher ausgeschaltet, kann die dann wieder ausreichend vorhandene Energie zum Laden der Batterien genutzt werden. Solarstrom: Wechselstrom auch bei NetzausfallDas Gerät kann sowohl bei nicht netzgekoppelten sowie bei netzgekoppelten PV-Anlagen als auch bei anderen alternativen Energiesystemen eingesetzt werden. Es lässt sich sowohl mit Solar-Lade-Reglern als auch mit netzgebundenen Wechselrichtern verwenden. maximale Flexibilität dank zweier WechselstromausgängeDer Hauptausgang stellt einen unterbrechungsfreien Betrieb sicher. Im Falle eines Netzausfalls oder bei einer Unterbrechung des Land-/Generatorstroms übernimmt das MultiPlus-II die Versorgung der angeschlossenen Verbraucher. Die Umschaltung geschieht so schnell (in weniger als 20 Millisekunden), dass ein unterbrechungsfreier Betrieb von Computern und anderen elektronischen Geräten gewährleistet ist. Der zweite Ausgang liefert nur dann Strom, wenn am Eingang des MultiPlus-II Wechselstrom verfügbar ist. Verbraucher, die die Batterie nicht entladen dürfen, wie z. B. ein Wassererhitzer, können an diesen Ausgang angeschlossen werden. viele Möglichkeiten zur SystemerweiterungDie Einstellungen lassen sich mit der VEConfigure Software binnen weniger Minuten ändern (es ist dafür ein Computer oder Laptop und ein MK3-USB-Interface notwendig).Es stehen mehrere Überwachungs- und Steuerungs-Optionen zur Verfügung: Color Control GX, Venus GX, Octo GX, CANvu GX, Laptop, Computer, Bluetooth (mit dem optionalen VE.Bus Smart Dongle), Batterie-Wächter, Digital Multi Bedien-Paneel. Konfiguration und Überwachung aus der FerneInstallieren Sie ein Color Control GX oder andere GX-Produkte, um sich mit dem Internet zu verbinden. Die Betriebs-Daten lassen sich auf unserer VRM (Victron Remote Management) Website kostenlos speichern und einsehen. Sind Systeme an das Internet angeschlossen, kann auf sie aus der Ferne zugegriffen und Einstellungen können geändert werden.

The Energy Meter EM24 from Victron Energy (MPN Rel200200100) is a three-phase energy counter with a maximum of 65a per phase. It is used in the house connection/counter box to measure the services on all three phases. The energy meter can be used as: Grid knife and is used as a tax input for an ESS system Measurement device for the performance of a PV inverter Measurement device for the performance of an alternating current unit For all uses mentioned above, the measuring device should be connected to the local network so that the GX device can achieve it. Note on GX firmware versions To support the Ethernet EM24 measuring devices, Venus 2.60 is the minimum firmware required on the GX device. Scope of delivery: 1x Victron Energy Meter EM24 Rel200200100   Ambient temperature -25 ° C - +55 ° C EAN 8719076051268 Manufacturer part number Rel200200100 Weight 0.44 kg Dimensions (LXBXH) 120 x 100 x 70 mm Manufacturer Victron Energy Display permanently integrated LCD display

Smart battery monitoring Victron Energy's SmartShunt 500A (MPN SHU050150050) is an all-in-one battery monitor. It connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, such as state of charge, remaining time, history information and much more. Settings can also be changed easily. Alternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is required but less wiring and clutter is desired. Characteristics Equipped with Bluetooth Check battery parameters conveniently on your smartphone or tablet Can be connected to GX device Additional input for additional monitoring options uncomplicated installation Differences to the BMV-712 battery monitor No programmable visual and audible alarm No programmable relay Why is battery monitoring important? Batteries are used in many areas, in most cases to store energy for later use. However, the battery itself does not display the amount of energy stored. Battery life depends on many factors. The service life can be shortened by undercharging or overcharging, deep discharging, excessive charging or discharging currents and high ambient temperatures. By monitoring with a battery monitor, the user receives important feedback so that countermeasures can be taken to extend the battery life if necessary. Scope of delivery: 1x SmartShunt 2x cables with fuse, for '+' connection and starter battery or midpoint connection You will find the right connection cable for the negative pole at Frenchman Energy here and an automotive cone here at Frenchman Marine here and the KFZ cone here data sheet IP protection IP21 weight 0.4kg Manufacturer VictronEnergy Dimensions (LxWxH) 75x135x85mm Manufacturer part number SHU050150050 EAN 8719076044253

The VCC 1212-50 from Votronic (3326) is a fully automatic, unisolved, battery charging converter for special vehicles, high-quality motorhomes, boat. The loading converter (booster) of the "VCC" series has been developed according to the latest specifications for the mobile load of supply batteries (living space/on-board batteries), from the alternator (starter battery) during the journey. The device also ensures During the journey for a complete iU1ou2 loading character. The max. Charging current of the VCC 1212-50 is 50a and it can work with lead-acid, gel, AGM1, AGM2 and LIFEPO4 batteries. This device loads from a 12V Battery / alternator a 12V battery. In contrast to the conventional separating relay, the charging voltage is lowered or raised according to charging program specification, therefore 6, 6 + plus vehicles are particularly suitable for euro standard. Universally usable multi -talent For on-board batteries in classic lyricic acid, lead-gel or lead-agm and modern lithium-lifepo4 technology, the 8 selectable charging programs ensure a surveillance-free, quick and gentle full load from every charging state with subsequent full maintenance and maintenance of the battery. Even on short trips, the battery is loaded with full charging current. Connected 12 V consumers are automatically supplied, even if the on-board network is heavily loaded. The automatic performance control ensures the necessary safety and starting capacity of the vehicle. Important features of the Votronic 3326 VCC 1212-50 The VCC 1212-50 is a B2B charger without galvanic insulation for charging 12V batteries from a 12V alternator / battery. Max. Charging current: 50a, input voltage range 12V, loads 12V batteries, recommended battery capacity: 75 - 440AH Increases or reduces the voltage to the necessary level in order to be able to precisely charge the on-board battery with the optimal charging characteristic. It compensates for line losses and voltage fluctuations in the alternator, such as that, for example, fully occur in Euro 6 vehicles (intelligent alternators) to a considerable extent. Is characterized by compact design, low weight (high-frequency switch fashion technology) and vigorously dimensioned performance components for safe operation. Significantly better energy balance of the on-board battery. No intervention in the starter circle; The device behaves like a strong consumer on the alternator. The 12 V consumers provided are protected against overvoltage and voltage fluctuations. The charging voltage is free of tips and regulated so that an overload of the batteries is excluded. Fully automatic operation: The device is constantly connected to the batteries and is automatically activated by the running alternator of the vehicle. When the engine is standing, the batteries are not unloaded. Parallel and buffer operation: With simultaneous consumption, the battery is charged or fully received. The adjustment of the loading times calculates and monitors the device automatically. Surveillance-free charge: multiple protection against overload, overheating, overvoltage, short circuit, misconduct and battery recharge through electronic discounting up to the complete separation of the device and battery. Construction network filter installed: Problemless parallel operation with other load sources (EBL, chargers, engine and fuel generators, solar systems) on a battery. Charging cable compensation: Tension losses on the charging cables are automatically excavated. Connection for battery temperature sensor (sensor included). In the case of lead batteries (acid, gel, AGM), the charging voltage is automatically adjusted to the battery temperature. This causes a better full load of the weaker battery in the cold, and unnecessary battery launch is avoided in summer temperatures. LIFEPO4 batteries: battery protection at high and particularly adapted load at low temperatures below 0 ° C. Charging aid for low-level lead batteries: gentle invitation of the (lead-acid,-gel, AGM) battery up to 8 V, then powerful support of the battery with any still switched on consumers. Also ensures the automatic activation of a Lifepo4 battery switched off by the BMS. What added value does the use of a B2B loading converter offer me? The loading converters ensure the optimal and quick load of the supply battery from the alternator while driving. In contrast to the simple separation relay, the charging voltage is raised to the value, which is necessary for the respective battery type for a full load and required by the battery manufacturers. In this way, the full charging current can flow and in a short time invite handsome amounts of electricity into the battery. Long charging lines and losses, as well as voltage fluctuations on the alternator, are cleaned cleanly. For loading converters with different input and output voltages (12V/24V or 24V/12V), the simple load of a second battery is possible even without installing a second alternator. The loading converters thus also provide the well-known high-quality quality of the battery charge of the Votronic chargers while driving. The intelligent microprocessor charging with "iu1ou2ou3" charging characteristics and dynamic charging time calculation automatically ensures the fast and gentle full load as well as subsequent charging of the connected batteries from any state of charge and always enables simultaneous care for consumers in parallel to the care battery. Scope of delivery: 1x Votronic 3326 VCC 1212-50 50A loading converter 1x operating instructions (German) 1x temperature sensor Also available in boots with the electronics of protected electronics!   Technical specifications Entrance of the vehicle starter battery "+ in Start" Vehicle starter battery nominal voltage 12 V Battery capacity (size), at least recommended 60 Ah Input voltage area (Euro 6 +), D + controlled 10.5 - 16.5 V Input overvoltage shutdown (Euro 6 +), max. 16.5 V Performance recording max. 760 W Electricity intake (with the lowest input voltage) max. 0.1 a - 68 a Electricity recording limited, 3 switch positions "in limit" 49 a, 42 a, 33 a Side load branch, charge/cargo maintenance for 12 V starter battery With external mains charging, switch position "B" 0 - 3 a Activation tax input "D+", from D+, Klemme 15, ignition 8 - 16.5 V In "Start"-tension sensor lines "VS" and "VS+" Yes / Yes Switch output "TR", signal for bypass relay /max. 12 V / 1 a Charging output on on-board supply battery "+ Out Bord" Loading/buffer/load current, regulated iu1ou2, lead, lifepo 0 a - 50 a Reduction in the case of switch position "out limit" 0 a - 39 a Bley acid, -Gel, -GM battery nominal voltage 12 V  Capacity (battery size), recommended / up to 75-320/440 Ah  lead charging programs stored in the memory 4  Vorbadestrom (Battery deepest discharge <8V), max. 25 a  Safety charging voltage at battery over temperature 12.80 V Lifepo4 battery nominal voltage 12 V (12.8 -13.3 V)  Capacity (battery size), recommended / up to 75-320/440 Ah  Lifepo4 charging programs stored in the memory 4  Safety charging voltage at battery over temperature 12.80 V "T t" input for battery temperature sensor "Bord" Yes Out "Bord"-tension sensor lines "VB-" and "VB+" Yes / Yes Purchase current, standby 16 mA Charging timer 3-way Tension <30 MV RMS Charging stress limit "+out board" (protection of consumers) 15.00 V External overvoltage shutdown "+out board" (20 sec) 15.50 V Short circuit/back load/safety protection Yes Device installation position any Temperature range -20 to 45 ° Speed ​​-controlled, temperature -controlled fan Yes Gradual delegation of the charging capacity at over temperature Yes Safety shutdown at overheating Yes Dimensions, including fortified. Flanges and clamps (LXBXH) 135 x 160 x 72 mm Weight 950 g Ambient conditions, humidity: max. 95 % room moisture, not condensing Scope of delivery: temperature sensor, operating instructions      

TheMultiplus-II 48/3000/35-32 GX from Victron Energy Is a high-end device combination that combines classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 50 A and the potential area of ​​application extends to eating applications. The inverter module provides a whopping 3000 W or 2400 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 35 A charging power and is supplemented by a 32 A transfer switch, with which it can be switched back and forth between the AC connections. Compared to the remaining devices of the series, the GX variants have an integrated GX display with numerous other connection options. Important performance features- Integrated GX control device with various communication connections-PowerControl and power assist-increase in network or generator performance-Built-in anti-Icelanding function and connection option for external electricity sensor (optional)- can be used as a backup device in network -coupled systems for the power supply for network failures- Can be used in various ESS (Energy Storage System) Applications- Ideally suited for professional seafaring, yachts, vehicles and land -related, removable applications-Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration-Practically unlimited performance through parallel and three-phase operation.- Can be configured on site or from a distance using Veconfigure software*technical features- 3000W power with non -linear load 2400 W continuous load and 6000 W Top output- for 48 V battery voltage, 32 A transfer switch and 35 A battery charger- Output voltage: 230 VAC, frequency: 50 Hz- Max. Efficiency is 95%, protection class IP22- Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 48/3000/35-32 GX. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. If the load is reduced, i.e. consumers are switched off, the energy that is sufficiently existing can then be used again for charging the batteries. Solar power: Alternating current even in the event of a network failureThe device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputsThe main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Scope of the integrated GX deviceA VE.CAN interface can be used to connect Victron (e.g. Ve.CAN MPPT) Ve.CAN devices. The connection can also be configured via the remote console for use with a compatible CAN bus Li-ion battery.1xusb connection, 1x Ethernet connection, 1x VE.Direct connection offer many options for system extensionThe settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary).Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle), battery guard, digital multi operating panel . Configuration and monitoring remotelyInstall a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed.

Das Orion Tr-Smart DC-DC von Victron Energy ist ein professionelles, DC zu DC adaptives 3-stufiges Ladegerät mit integriertem Bluetooth, im Markt bekannt als Battery-to-battery (B2B) Lader. Der Ladebooster ist zur Verwendung in Doppelbatteriesystemen in Fahrzeugen oder auf Booten geeignet, bei denen die Lichtmaschine und die Startbatterie zum Laden der Servicebatterie verwendet werden. Das Ladegerät kann in 12V- oder 24V-Systemen verwendet werden und ist sowohl für Blei- als auch für Lithium-Batterien geeignet. Es sind Modelle bis zu 400W erhältlich und unbegrezt viele Geräte können parallel geschaltet werden, um die Ausgangsleistung zu erhöhen. Eigenschaften:- Geeignet für Bluetooth Smart- Vollständig programmierbar- Adaptiver 3-stufiger Ladealgorithmus- Fern-An-/Abschaltung- Kurzschlussfest- Parallelschaltung zur Erhöhung des Ausgangsstroms möglich- Übertemperaturschutz- Schutzklasse IP43 Bluetooth Smart:Die Überwachung, Änderung der Einstellungen und Aktualisierung des Ladegerätes bei neu zur Verfügung stehenden Softwarefunktionen kann mit jedem Bluetooth-fähigen Smartphone, Tablet oder anderen Geräten vorgenommen werden. Adaptiver 3-stufiger Ladealgorithmus: Konstantstrom – Konstantspannung - Erhaltung- Bei Bleibatterien ist es wichtig, dass bei flachen Entladungen die Aufnahmezeit kurz gehalten wird, um eine Überladung der Batterie zu vermeiden. Nach einer Tiefentladung wird die Konstantspannungsdauer automatisch verlängert, um sicherzustellen, dass die Batterie vollständig auflädt.- Für Lithium-Batterien ist die Aufnahmezeit fest eingestellt, per Voreinstellung 2 Stunden.- Alternativ kann eine feste Ausgangsspannung gewählt werden. Fern-An-/Abschaltung:An den zweipoligen Stecker lässt sich ein ferngesteuerter Ein-/Aus-Schalter oder ein Relais-Kontakt anschließen. Alternativ kann der Anschluss H (rechts) des zweipoligen Steckers zu einem Batterie-Pluspol oder der Anschluss L (links) des zweipoligen Steckers an den Batterie-Minuspol (oder zum Beispiel an die Karosserie eines Fahrzeugs) geschaltet werden. Technische Daten:- Eingangsspannungsbereich: 10-17 V- Ausgangsnennspannung: 12,2 V- Einstellbereich Ausgangsspannung: 10-15 V- Toleranz Ausgangsspannung: ±0,2 V- Kont. Ausgangsstrom bei Ausgangsnennspannung und 40°: 30 A- Kont. Ausgangsleistung bei 40°C: 360 W- Betriebstemperaturbereich: -20°C - +55°C- Gewicht: 1,8 kg- Abmessungen: 130 x 186 x 70 mm Lieferumfang:1x Victron Energy Orion-Tr Smart DC/DC Ladebooster 12/12-30A (360W) ORI121236140

The Votronic 5545 tank electrode 15-50 K is a universally applicable tanker or tank sensor for measuring the tank level. The tank electrode 15-50 K is suitable for witness and fecal tanks as well as for drinking water tanks. By using appropriate materials, these tankers also correspond to the DIN 2001-2 drinking water regulation. It is designed for tanks with a height of between 15 and 50 cm. As another special feature, the tank electrodes can be mounted on the fuel side from both inside and from the outside. With fresh water tanks, assembly can even be carried out on the underside of the tank. Essential product properties of the 15-50 K tank electrode Stable electrode, easy to shorten at tank height For tanks with a height between 15 and 50 cm Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 m Connection cable 75 cm long Simple adaptation to the given tank height Test mark: E-test (EMV/car directive) Corresponds to DIN standard 2001-2 from the drinking water regulation linear, stepless signal of the filling height Suitable for 12V and 24V permanent operation Optimal in interaction with Votronic filling displays The tanker is compatible with the following Votronic :. Fresh water tank advertisement S, 5311 Wastewater indicator S, 5313 Fecal tank advertisement S, 5315 Info Panel Pro, 5330 Info Panel Pro 24V VPC Terra VPC Merkur VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749   Delivery time: 1-3 working days Scope of delivery: 1x Votronic 5545 15-50 K fuel provider 1x assembly material consisting of sealing ring, union nut PG 29, connection cable 75 cm 1x operating instructions          

Security for the battery The Votronic Automatic Charger, which are equipped with the latest charging technology and designed for all standard lead batteries, ensure the right battery charge (see chapter charging technology). The peripheral devices from Votronic are used to treat the batteries in daily operation, which work in the background and ensure automated loading control and battery monitoring. In the case of motorhomes, boats, emergency vehicles etc. Therefore, several batteries are usually installed in these vehicles, which are used separately after driving and standing. A distinction is made between the starter and supply battery (s). As the name suggests, one battery is responsible for the reliable start of the vehicle, while the other (s) takes over the supply of the electrical devices in the vehicle. In order for each battery circle to work reliably and the electrical concept of the vehicle works, various devices for loading control are used while driving. Device type Art.- No. Operating Tension [V] Electricity- recording [Ma] Switching current Tirriad Driving [A] Charging current in standing operation For starter batt. [A] Weight [G] execution Standby-Charger 12V 3065 12 - - 0 - 3 52 A Standby-Charger 24V 6065 24 - - 0 - 2 52 B Dimensions (W x D x H): 90 x 60 x 38 mm Test mark: CE, e-test (EMV/car directive) Scope of delivery: Instructions Standby-Charger The Votronic Standby Charger serves to automatically recharge and load the starter battery or the additional battery if the network charger, the solar loader or the generator only has a charging output. The device can be easily retrofitted by simply switching between the on-board and start battery or on-board and additional battery without having to change the existing cabling. For example, if the network charger is in operation and loads the on-board battery, the second battery (start battery or additional battery) is also included with a small part of the charging current. This loading is automatically working and can be seen by an increased voltage situation of the second battery. An overload of the second battery is excluded because the charging voltage is lowered by at least 0.6V and the charging current is limited to 3a (24V variant: 2a). Make sure that both batteries Same battery tension 12 V / 12 V or 24 V / 24 V, since a mixed operation is not possible 12 V and 24 V. The standby charger is Only for use with lead batteries Suitable (acid / gel / AGM technology), not for the combination of lifepo4 and lead (starter) batteries. Also available in boats with the electronics protected from moisture! Delivery time: 1-3 working days  

The Blue Smart IP22 12/30 (1) charger from Victron Energy (MPN BPC123047002) is a professional, compact 12V 30A battery charger of the latest generation with a charging output and built -in Bluetooth! The Blue Smart IP22 12/30 (1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 12V lead batteries and modern lithium batteries. Highlights of the 12/30 (1) Blue Smart IP22 Charger Intelligent charging until the perfect battery state ... The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life. Restoration of deep-downloaded "dead" batteries Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections. Call the battery status from afar, with the VictronConnect app The Blue Smart IP22 12/30 (1) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The most important technical features of the 12/30 (1) Blue Smart IP22 Charger Victron part number: BPC123042002 Lades 12V lead-acid, gel, agm and lithium batteries 30a maximum charging current 1 battery charging output Very compact dimensions: 235 x 108 x 65mm Highly modern, seven-level loading algorithm With integrated Bluetooth for use with the free VictronConnect app Other performance features of the 12/30 (1) Blue Smart IP22 battery loader Trend -setting efficiency With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard. Adaptive 7-stable loading algorithm The 12/30 (1) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use. Storage mode: Less maintenance and aging in the resting state of the battery The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 12V battery) in order to minimize the gas development and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure. Scope of delivery: 1x Victron Energy BPC123042002 12/30 (1) IP22 Blue Smart Charger 1x operating instructions data sheet Generally item number 1-67-010615 EAN 8719076037453 Manufacturer part number BPC123047002 Manufacturer Victron Dimensions (LXBXH) 10.8 x 23.5 x 6.5 cm Weight 0.9 kg

The Victron ET340 (MPN Rel300300000) is a 3-phase electricity meter that is designed for a maximum current of 65a per phase. The ET340 electricity meter can be used for four different applications: Electricity meter and tax input in an ESS (home storage system) in connection with the Color Control GX and a Victron inverter Electricity measurement at the output of a PV inverter Electricity measurement at the output of an AC unit Wiring and connection of the ET340 There are two options in its wiring. On the one hand, the direct connection, via the RS485 to USB interface with 1.8m or 5m cable or alternatively the wireless connection via ZigBee. Scope of delivery: 1x VICTRON Rel300300000 ET340 3-phase power meter 65a/phase 1x operating instructions Weight 0.23 kg Manufacturer Victron Energy guarantee 5 years of manufacturer's guarantee

Der Victron Energy Smart BuckBoost ist ein äußerst kompakter und effizienter DC-DC-Wandler mit einer Leistung von 50A. Dieser Wandler kann sowohl Auf- als auch Abwärtskonvertierung durchführen. Dank seiner kompakten Bauform, die der des SmartSolar 75/15 entspricht, sowie eines beeindruckenden Wirkungsgrades von 98% (was zu minimaler Wärmeentwicklung führt) und einer VE.Direct-Schnittstelle für Überwachung und DVCC (Dynamic Voltage and Current Control) eignet sich dieses Gerät optimal dazu, beispielsweise die Ladung von LiFePO4-Batterien durch Lichtmaschinen zu optimieren oder Blei-Batteriekreise aus einer Lithium-Batteriebank zu laden. Der Victron Energy Smart BuckBoost kann sowohl als Batterieladegerät als auch als Netzteil mit einem breiten Eingangs- und Ausgangsspannungsbereich verwendet werden. Ladegerät-Modus:Im Lademodus verlängert der vierstufige Ladealgorithmus die Lebensdauer der Batterie durch präzises Aufladen. Dank vollständig einstellbarer Ladealgorithmen mit acht vorprogrammierten Batterie-Setups wird eine optimale Ladung für jede Batterieart sichergestellt. Dies ist besonders wichtig bei Fahrzeugen mit Euro 5 oder 6 Smart-Lichtmaschinen, die oft unter ungünstigen Bedingungen eine zu niedrige Ladespannung liefern. Die geregelte Ladung schützt auch die Lichtmaschine in Lithiumsystemen vor Überlastung, da die niedrige Impedanz von Lithiumbatterien zu einem hohen Lichtmaschinenstrom führen kann. Stromversorgungs-Modus:Im Stromversorgungsmodus bleibt die Ausgangsspannung stabil, unabhängig von Laständerungen oder Schwankungen der Eingangsspannung (innerhalb des angegebenen Bereichs). Die Ausgangsspannung ist vollständig einstellbar und bleibt konstant, selbst wenn die Eingangsspannung schwankt, dank der automatischen Buck-Boost-Regelung. Diese Regelung sorgt auch dafür, dass der Strom nie den eingestellten Wert überschreitet, selbst wenn die Eingangsspannung höher ist als die Ausgangsspannung. Intelligente Motor-Erkennung:Der Smart BuckBoost kann so konfiguriert werden, dass er nur dann Strom liefert, wenn der Motor läuft. Diese Funktion wird durch die integrierte Motorabschaltungserkennung ermöglicht. Dadurch entfällt die Notwendigkeit, die Fahrzeugverkabelung anzupassen oder einen zusätzlichen Motorerkennungssensor hinzuzufügen. Diese Funktion verhindert auch, dass die Bordspannung des Fahrzeugs zu niedrig wird. Zusätzlich zur automatischen Erkennung kann der Smart BuckBoost auch über den Remote-On/Off-Anschluss aktiviert werden. Konfiguration und Überwachung:Die Programmierung und Überwachung des Smart BuckBoost erfolgen vollständig über die VictronConnect App. Dies ermöglicht auch den Fernzugriff über VictronConnect-Remote (VC-R) bei Anschluss an ein GX-Gerät, das mit dem VRM-Portal verbunden ist. Über den integrierten VE.Direct-Port kann das Gerät über die GX Remote Console oder von einem PC, Apple-Computer mit macOS oder Android-Gerät in Verbindung mit einer VE.Direct zu USB-Schnittstelle und VictronConnect überwacht werden. Über ein GX-Gerät kann der Smart BuckBoost auch über DVCC intelligent gesteuert werden, beispielsweise von einem Lynx Smart BMS. Wasserdicht und Geräuschlos:Der Smart BuckBoost erfüllt den IP65-Standard, was bedeutet, dass das Gerät staubdicht ist und starkem Regen standhält. Durch natürliche Konvektion wird die Wärme abgeleitet, wodurch auf einen lauten Lüfter verzichtet werden kann.Spezifikationen:- Eingangsspannungsbereich: 9-17 Volt- Ausgangsspannungseinstellbereich: 10-17 Volt- Ausgangsspannungstoleranz: +/- 0,25 % (max)- Ausgangsspannungsrauschen: 10 mV eff- Einstellbereich für Eingangs- und Ausgangsstrom: 1–50 Ampere- Maximaler konstanter Kurzschlussstrom: 50 Ampere- Dauerleistung bis 40 °C: 700 Watt- Maximale Effizienz: 98,5 %- Leerlaufstromverbrauch: < 100 mA- Standby-Stromverbrauch: < 1,5 mA- Betriebstemperaturbereich: -20 bis +60 °C (Reduzierung um 1,5 % pro °C über 40 °C)- Luftfeuchtigkeit: Max. 95 % nicht kondensierend- Gleichstromanschluss: Schraubklemmen- Maximaler Kabelquerschnitt: 25 mm² (AWG4)- Gewicht: 0,330 kg (0,73 Pfund)- Abmessungen (H x B x T): 137,3 x 123,1 x 40 mm (5,4 x 4,85 x 1,6 Zoll)- Schutzklasse: IP65

The MEGA-FUSE fuse holder from Victron Energy (MPN CIP000100001) with a lid is used to secure DC MEGA-FUSE. The housing offers solid protection against outer influences. Important article features at a glance: 500A max. Electricity at max. 32V DC 300A max. Electricity at 58V DC For fuses of the Mega-Fuse type Material: high-strength plastic mixture Corresponds to IEC 60947-3: 1999 + A1: 2001 + A2: 2005 in connection with IEC 60947-1: 2004 Via the MEGA strip protection: Fuels of the MEGA-FUSE fuse are the patrol fuses and are screwed to the holder to ensure optimal contact. Corresponding nuts and sprinkling rings are already pre -assembled on the holder. With mega fuses, up to 500a can be secured at 32V DC. Up to 300a are possible for the 58V variants. 32V mega -fuse fuses - all sizes up to max. 500a 58V mega -fuse fuses - all sizes up to max. 300a Scope of delivery:1x Victron CIP000100001 MEGA-FUSE Fuse holder

Dreiphasen-Energiezähler mit Ethernet- und VE.Can-KommunikationsanschlüssenDer Victron VM-3P75CT Energiezähler ist ein Standardgerät zur Messung der Leistung und Energie in Einzel- und Dreiphasenanwendungen, beispielsweise im Verteilerschrank oder zur Messung der Leistung eines PV-Wechselrichters, eines AC-Generators oder der Leistung eines Wechselrichters und Wechselrichter-/Ladegeräts.Hohe AktualisierungsrateDurch Berechnung der Effektivleistungswerte für jede Phase überträgt der Energiezähler diese mit hoher Geschwindigkeit über VE.Can oder Ethernet, was zu genauereren Messungen des Leistungsverbrauchs, des Netzbezugs und des Netzrücklaufs führt, beispielsweise in einem EES-System.Der VM-3P75CT ermöglicht eine einfache EinrichtungDer Energiezähler wurde für eine einfache Integration entwickelt und funktioniert sofort (Plug & Play) als Netz-Messgerät für die meisten Systeme. Die Konfiguration (über VictronConnect) ist nur erforderlich, um die Funktion zu ändern (Netz-Messgerät, PV-Wechselrichter, AC-Generator oder AC-Last-Messgerät) sowie die manuelle IP-Konfiguration anstelle der Standardeinstellung, DHCP.Fernüberwachung von überallDie Daten werden in der VictronConnect-App, einem GX-Gerät wie dem Cerbo GX oder Ekrano GX und unserem VRM-Portal angezeigt.Mühelose Installation mit SchnappschaltstromwandlernDer VM-3P75CT verwendet Zangenmesswandler um den Strom genau zu erfassen, ohne die Verdrahtung einer bestehenden Installation ändern zu müssen.Vektor ErfassungsmethodeDer VM-3P75CT verwendet das Vektormeldeverfahren (die Vektoren jeder Phase L1, L2 und L3 werden summiert). ⁠

The Votronic Energy Monitor consists of a special communication module (Bluetooth Connector S-BC), which in conjunction with a Votronic Solar loader (from 2013) with LCD solar computer S and/or the LCD battery computer S or VPC Jupiter With Smart Shunt, the values ​​that are displayed on the corresponding display also transmit to a mobile device via Bluetooth. The required app for Android or iOS is available free of charge in the Google Play Store or iOS App Store. The connection of the Bluetooth Connector S-BC is very simple. It is simply stuck using the modular cable in the scope of delivery between the Votronic Solar loader and the LCD solar computer S or between the Smart Shunt and the LCD battery Computer S or VPC Jupiter. The device has two inputs and outputs each, so that 1 solar controller with LCD solar computer and 1 smart shunt with LCD battery computer or VPC Jupiter can be connected together to a communication module. In this way, the entire information of the on-board battery, such as voltage, charging or discharge flows and the remaining capacity, as well as all data from the solar system can be easily read via the cell phone or tablet. In addition, the most important data is logged, graphically prepared and are saved for a longer period of time. Even the output as a CSV file for your own analysis purposes is possible. Of course, the Bluetooth Connector S-BC can also be installed at any time. The Bluetooth Connector S-BC is compatible with the following devices:-Votronic solar loader in SR and MPP technology from 2014 (series number 14VXX.XXXXX)- Battery charger of the type VBCS triple- LCD battery computer S with smart shunt (all versions)- VPC Jupiter with Smart-Shunt (all designs)   Technical specifications  Device type Bluetooth Connector S-BC  Item No. 1430  Dimensions (BXTXH) in [mm] 75 x 47 x 24  Weight in [g] 37  Test mark CE, e-test (EMV/car directive)  Ambient conditions, humidity: max. 95% room moisture, not condensing  Scope of delivery: operating instructions, 2x control line 6-pin 1 m long

Das Blue Smart IP65 12/15 12V 230V Batterieladegerät ist das neuste professionelle, Ladegerät von Victron Energy mit eingebautem Bluetooth. Es ist zum aufladen von 12V Batterien verschiedenster Bauarten ausgelegt und lieferten einen maximalen Ladestrom von 15A. Zusammen mit der kostenlosen VictronConnect App können Sie so die Aktivität Ihres Batterieladers einfach und smart über Ihr Smartphone, Tablet oder den Computer auswerten und sogar bis zu einem gewissen Grad konfigurieren.Technische Highlights des Blue Smart IP65 12/15 Batterieladegeräts einfache Konfiguration und Einrichtung des Blue Smart IP65 12/15 über Bluetooth Schnittstelle für alle 12V Batterie-Typen geeignet max. 15A Ladestrom solider Schutz gegen Spritzwasser. Staub- und Chemikalien dank Schutzart IP65 verfügt über mehrere Funktionen zur Verlängerung der Batterielebensdauer automatischer Temperatur Abgleich bei niedrigen, bzw. hohen Temperaturen automatische Stromversorgungsfunktion 7-stufiger, intelligenter Ladealgorithmus kann vollständig entladene Batterien „tote Batterien“ wiederherstellen verfügt über Niedrigenergiemodus zum Laden kleiner Batterien Victron-Artikelnummer: BPC121531064R Lithium-Ionen Batteriemodus Ultra-hocheffzientes “grünes” BatterieladegerätMit einem Wirkungsgrad von bis zu 95 % erzeugen diese Ladegeräte drei- bis viermal weniger Wärme, als der Industriestandard. Und, nachdem die Batterie voll aufgeladen ist, reduziert sich der Stromverbrauch auf 0,5 Watt, das ist fünf- bis zehnmal besser, als der Industriestandard.langlebig, sicher und leise geringe Wärmebelastung der elektronischen Bauteile geschützt gegen das Eindringen von Staub, Wasser und Chemikalien. Schutz vor Überhitzung: Der Ausgangsstrom wird linear verringert , wenn die Temperatur auf bis zu 60 °C ansteigt, das Ladegerät versagt also auch nicht bei extremen Temperaturen die Ladegeräte sind absolut geräuschlos dank passiver Kühlung: kein Lüfter oder anderen beweglichen Teile Reconditioning (Wiederherstellung)Eine Blei-Säure-Batterie. die nicht ausreichend geladen wurde oder tage- bzw. wochenlang im entladenen Zustand belassen wurde, verschlechtert ihre Leistung aufgrund von Sulfatierung. Sofern der Prozess rechtzeitig gestoppt wird, lässt sie die Sulfatierung teilweise wieder rückgängig machen, indem die Batterie mit niedrigem Strom geladen wird, bis eine höhere Spannung erreicht wurde.Funktion zur Wiederherstellung von vollständig entladenen BatterienDie meisten Ladegeräte mit Verpolungsschutz erkennen eine Batterie, die bis auf Null Volt oder fast auf Null Volt entladen wurde, nicht und laden sie daher auch nicht wieder auf. Das Blue Power-Ladegerät versucht jedoch, eine vollständig entladene Batterie mit niedrigem Strom wieder aufzuladen und nimmt den normalen Ladevorgang wieder auf, nachdem ausreichend Spannung über den Batterieanschlüssen aufgebaut wurde.Optionales Zubehör Blue Smart IP 65 12/15 BPC121531064R 12 V Zigarettenanzünderstecker mit Sicherung   2 Meter Verlängerungskabel Anschlussklemmen mit Sicherungen               M6 Kabelschuh-Steckverbinder mit Sicherung Lieferumfang: 1x Victron BPC121531064R Blue Smart IP65 12/15 12V 230V Batterieladegerät1x Bedienungsanleitung1x Anschlussklemmen1x M8 Kabelschuh-Steckverbinder

Victron Touch 50 GX - Perfect monitoring and control 4x tank and temperature connections 3x VE.Direct and USB ports 4x digital inputs 2x relays Expandable with the GX Touch Display Maximizes system performance in real time Perfect monitoring and control The GX Touch 50 is the display accessory for the Cerbo GX. The 5-inch touchscreen display provides an instant overview of your system and allows you to make settings in no time at all. It simply connects to Cerbo GX with a cable, its super-slim, waterproof design, top-mounting, and easy installation offer plenty of flexibility in creating a crisp and clean dashboard. The GX Touch 50 is an ideal match for the Cerbo GX - the completely new communication center allows you to always have perfect control of your system from any location and to maximize performance. Simply connect via our Victron Remote Management (VRM) portal or access directly via GX Touch 50, an MFD or our VictronConnect App using Bluetooth capability. This latest member of the GX series combines the best in connectivity, redefining intelligent power solutions in every respect. Easy to attach GX Touch is optimized to exceed the standards of professional installers. The screen simply bolts to the top of a dashboard, eliminating the need to create perfect cutouts like the ColorControl GX, and connects via a single cable, eliminating the need to run multiple cables to the dashboard. You can find more information here.

With the Battery Charger VBCS Triple, a completely new device combination was created, which consists of a PB network charger, VCC charging converter and MPP solar controller and ensures the energy supply in the motorhome. The batteries are always loaded automatically, whether while driving or in the parking space. Above all, the lavishly dimensioned charging capacity of the integrated charging converter ensures that the on -board battery is loaded with full charging current on short trips and is fully charged at the destination. PB network charger with 20a Network operation, stand operation on the outdoor socket from the power grid: The full charging capacity in the universal area of ​​110V AC-230V AC without switchover is also available worldwide even with large deviations in the network supply (sub/overvoltage, sinus form, frequency). Powerful charge of the on-board battery and supply of 12V consumers from the network. Side load branch 12V/ 4-5A for maintaining the support and charging of the vehicle (lead) starter battery during long periods. Thanks to the long-term charging characteristics, the device can be constantly connected to the network (operation, winter break) VCC charging converter with 30A Ladwormer, "B2B" operating, mobile operation from the alternator and starter battery (Battery to Battery): The powerful loading converter (booster) enables the on -board battery to be completely loaded. It increases/reduces the voltage to the necessary level in order to be able to precisely charge the on -board battery with the optimal charging characteristic. It fully compensates for line losses and considerable voltage fluctuations in the alternator, such as that occur, for example, on Euro 6 vehicles. The 12V consumers provided are protected against overvoltage and voltage fluctuations. MPP solar controller for max. 250WP Solar operation, "MPP" (maximum power point): In the case of MPP technology, the controller automatically determines the maximum performance yield (MPP) of the solar modules several times per second. The charging current gain of 10% - 30% ensures shorter loading times and the best possible use of the solar system. Side load branch of the support charge and loading of the vehicle starter battery during long periods. Switch output "AES", in the case of permanently plenty of solar power surplus, the automatic switching of refrigerators with "AES" (automatic energy selector, electrolux / dometic) from gas to 12V operation. Pulse operation, training for the on-board battery in the loading breaks if there is no load source: Battery training protects the unused (lead) battery when hibernating, seasonal operations or long breaks from faster aging and failure by sulfating. Characteristics The charging voltage is free of tips and regulated so that an overload of the batteries is excluded. Fully automatic operation: The charger can be constantly connected to the batteries and keeps them in full load. If there is no load source (power failure, engine stop, night), the batteries will not be unloaded. Parallel and buffer operation: With simultaneous consumption, the battery is charged or fully received. The adaptation of the loading times calculates and monitors the charger automatically. Monitoring-free charge: multiple protection against overload, overheating, overvoltage, short circuit, misconduct and battery recharge through electronic discounting to the complete separation of charger and battery. Power supply function: Allows consumers to be supplied without a battery (e.g. when changing the battery). Installed spare network filter: easy parallel operation with other loading sources (wind, engine and fuel generators) on a battery. Charging cable compensation: Tension losses on the charging cables are automatically excavated. Connection for battery temperature sensor (included): For lead batteries (acidity, gel, AGM), the loading voltage is automatically adjusted to the battery temperature, causes a better full load of the weaker battery in the case of cold, in summer temperatures it is unnecessary Avoiding battery. LIFEPO4 batteries: battery protection at high and especially at low temperatures <0 ° C. It is absolutely recommended if the battery temperature can fall below 0 ° C during operation. Lead battery regeneration automatically twice a week against harmful acidic layers at a service life. Charging aid for deep-downloaded lead batteries: gentle invitation of the (lead-acid, -gel, -gm) battery up to 8 V, then powerful support of the battery with any still switched on consumers. Ready-to-use connection for optional LCD-Charge Control S technical features Automatic battery regeneration Connection remote control/display Power limit function-network/charging power reduction Temperature compensation Tension sensor (with very long charging lines) Power supply function (battery change) Battery capacity (size) adjustable Silent run function (night lowering) Temperature sensor included Loading programs "Gel": charging program for gel batteries Canceled to closed, gas-tight gel/dryfit batteries with a defined electrolyte, which generally need a higher charging voltage level and longer U1 keeping times to achieve short loading times with particularly high capacity storage and to avoid long-term battery "starvation". "AGM": charging program for AGM/fleece batteries Intended for loading closed, gas-density AGM (absorbent glass mat) batteries in lead fleece technology, which require a particularly high U1 level with coordinated holding times for full load and then a moderate U2 level for keeping charging (Plate and round cell technology). Charging program "DIN 0510" for lead-acid/wet batteries General DIN characteristics for cargo and loading of open and closed lead batteries with removable cellic plugs and the possibility of acid control and correction (maintenance). Also used for closed batteries, as low in maintenance, maintenance -free, antimonal, silver -legged, calcium etc. with low or very low water consumption. Provides short loading times, high load factor and high acid mixture, even in the resting (stationary) use (acid layer) for "wet" drive, lighting, solar, solar, heavy duty and standard batteries. "Universal": charging program for lead acid/wet/AGM batteries Universal program for loading and maintaining the loading of acid batteries in vehicles (mixed mobile/stationary). Offers short loading times, good charging factor and good acid mixture at open and closed, low-maintenance, maintenance-free standard, drive, lighting, solar and heavy duty batteries, as well as AGM batteries with normal U1 level. "Lifepo4": charging program for lithium batteries Charging program matched to lithium-lifepo4 batteries with its own BMS and prescribed or built-in protective circuit. The LIFEPO4 battery automatically maintains a special rest conservation when the vehicle (seasonal operation) is switched off) automatically on a load level of 50-80% advantageous for the lifespan and also buffert 12V consumers and the vehicle starter battery. In addition, a regular car wake-up function activates the battery cell balancing. Scope of delivery: 1x Votronic VBCS 30/20/250 Triple-Ci Battery Charger 3242 1x temperature sensor   Also available in boats with the electronics protected from moisture!   Technical specifications Network operation    Nominal operating voltage (AC) in [V] 110 to 230/45 - 65 Hz worldwide  Operating voltage area (AC) in [V] 90-270 (full charging power)  Max. Performance recording (AC) in [W] 360  Charging-performance on-board/starter battery Max. [A] 20,0 / 4,0  Switch output for engine start lock Yes  Power limit function Yes  12 V / 12 V B2B charging converter operation    Charging-performance on-board battery Max. [A] 30  Automatic activation D+ / ignition Yes  Starter battery / lima voltage range (Euro 6) in [V] / Max. Electricity [A] 10,5 - 16,0 / 42  Limit II max. Stride limitation (adjustable) in [a] 25  MPP-solar loader control operation    Solar module performance (Pmax) in [WP] 50 - 250  Solar module current max. [A] 15,0  Solar module voltage (VOC) Max. [V] 36  Charging current on board / starter battery Max. [A] 18,0 / 4,0  Switch output AES refrigerator Yes   Starter battery    Nominal voltage [V] / capacity min. [AH] recommended 12  / > 60  Bord battery, iu1ou2ou3    Nominal voltage lead / lifepo4 [v] 12 / 12,0 - 13,3  Battery capacity, adjustable [ah] 45 - 280  Device installation position any  Temperature range [° C] -20 to +45  Protection level/class IP 21  Dimensions (WXHXT) in [mm] - Dimensions including fastening flanges, without connections 217 x 85 x 250  Weight [G] 2.700  Ambient conditions, humidity: max. 95% room moisture, not condensing  Scope of delivery: power cable, 1 temperature sensor, operating instructions    

The Multiplus-II 12/3000/120-32 is a high-end device combination of Victron Energy that combines classic multiplus components with an external current sensor and integrated anti-Icelanding function. This expands the functions PowerControl and Power Assist to 50 A. The inverter module provides a whopping 3000 W or 2400 W with a linear permanent burden on non -linear loads. The 12 V battery charger is also very well proportioned with 120 A charging power and is supplemented by a 32 A transfer switch, with which it can be switched back and forth between the AC connections. Important performance features of the Multiplus-II 12/3000/120-32PowerControl and Power Assist increase in network or generator performanceBuilt-in anti-Icelanding function and connection option for external electricity sensor (optional)Can be used as a backup device in network -coupled systems for the power supply for network failurescan be used in different applicationsIdeally suited for professional seafaring, yachts, vehicles and land -bound, native applicationsVe.Bus interface for parallel and three-phase operation, remote monitoring and system integrationPractically unlimited performance through parallel and three-phase operationCan be configured on site or from a distance using Veconfigure softwaretechnical features3000 W power with non -linear load 2400 W continuous load and 5500 W Top performancefor 12 V battery voltage, 32 A transfer switch and 120 A battery chargerOutput voltage: 230 VAC, frequency: 50 HzMax. Effect is 95%, protection class IP22Always enough power thanks to PowerControl and Power Assist A maximum network or generator current can be set on the Multiplus-II 12/3000/120-32. The Multiplus-II then takes into account other connected alternating current consumers and only uses the electricity to load the battery, which is still “left”. This prevents the generator or mains connection from being overloaded (PowerControl function). With the power assist function, the PowerControl principle receives a new dimension. Load tips often only occur for a limited period of time. In such a case, the multiplus-II compensates for the weak generator, land electricity or network output immediately by energy from the battery. The load is reduced, i.e. H. If consumers are switched off, the energy that is then sufficiently existing can be used again to charge the batteries. Solar power: alternating current also in the event of a network failureThe device can be used for non-mesh-coupled and network-coupled PV systems as well as in other alternative energy systems. It can be used with solar charging regulators and with network-bound inverters. Maximum flexibility thanks to two alternating current outputsThe main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guaranteed. The second output only provides electricity if the Multiplus II AC. Consumers who are not allowed to unload the battery, such as B. a water heater can be connected to this output. Many options for system expansionThe settings can be changed with the Veconfigure software within a few minutes (a computer or laptop and an MK3 USB interface are necessary). GX, Canvu GX, Laptop, Computer, Bluetooth (with the optional Ve.Bus Smart Dongle), battery guard, digital multi operating panel. Configuration and monitoring remotelyInstall a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, you can access them from a distance and settings can be changed.