Fuse Holders
LYN060102000
Victron Lynx distributor
The Victron Lynx Distributor (MPN Lyn060102000) is a modular DC collection rail with devices for four DC fuses. It monitors the status of each backup and shows its respective conditions via an LED on the front. The Lynx distributor contains a positive and a negative collective rail and offers a connection for 4 individual DC devices, loads or DC groups. It offers space for individual DC fuses per DC group.
Properties of the Victron Lynx distributor
Connection for four individual DC devices, loads or groups
Positive and negative collective track
Mega fuses
easy installation
Part of the modular Lynx distribution system
Security indicator LEDs
If you want to use the security indicator LEDs on the Lynx distributor, a connection to a Lynx Shunt is also required. The Lynx Shunt contains the required width of input current supply (8V-70V DC) in order to output the required 5V (4.5-5.5V) electricity requirements of the Lynx distributor conductor plate. The RJ11 cable required for connection is included. The Lynx Shunt has two ports, both of which can be used.
With full functionality, only the central LED shines green. If a fuse is burned (or missing), the LEDs of the central and security cycle shine red. If you do not use all connection points in your DC distribution, reactive fuses may need to be attached to delete the red LEDs.
Fuses
The Lynx distributor uses mega fuses. Please note that some mega fuses are only designed for 36V (suitable for 24V systems). For 48V systems, backups with a nominal voltage of 58/64V must be used.
Scope of delivery:
1x victron lynx distributor
data sheet
Weight
2.2 kg
Manufacturer
Victron Energy
Dimensions (LXBXH)
288 x 170 x 77.5 mm
Manufacturer part number
Lyn060102000
EAN
8719076022633
1x RJ11 cable
CIP000100001
Victron high-load security holder with lid for mega-fuse / AMG fuses
The MEGA-FUSE fuse holder from Victron Energy (MPN CIP000100001) with a lid is used to secure DC MEGA-FUSE. The housing offers solid protection against outer influences.
Important article features at a glance:
500A max. Electricity at max. 32V DC
300A max. Electricity at 58V DC
For fuses of the Mega-Fuse type
Material: high-strength plastic mixture
Corresponds to IEC 60947-3: 1999 + A1: 2001 + A2: 2005 in connection with IEC 60947-1: 2004
Via the MEGA strip protection:
Fuels of the MEGA-FUSE fuse are the patrol fuses and are screwed to the holder to ensure optimal contact. Corresponding nuts and sprinkling rings are already pre -assembled on the holder.
With mega fuses, up to 500a can be secured at 32V DC. Up to 300a are possible for the 58V variants.
32V mega -fuse fuses - all sizes up to max. 500a
58V mega -fuse fuses - all sizes up to max. 300a
Scope of delivery:1x Victron CIP000100001 MEGA-FUSE Fuse holder
CIP100200100
Victron Mega-Fuse Security Modular
The modular mega-fuse security holder of Victron Energy (MPN CIP100200100) With a lid, the secure installation of DC Mega-Fuse patrol fuses is used together with up to 5 other shears on a common bus bar. This solution is ideal for securing parallel multiplus or quattro interverters or inverter from other manufacturers. The safety holders can be put together so that all security holders are firmly anchored in their position on the bus bar. (see image material)
The housing offers solid protection against outer influences. There are currently two bus bar versions that can be used with the modular holder:
Victron Busbar 5 CIP100400060 - for 5 CIP100200100, max 500aVictron Busbar 6 CIP100400070 - for 6 CIP100200100, max 2000a holder
Important article features at a glance:
500A max. Electricity at max. 32V DC
300A max. Electricity at 58V DC
For the joint use with the 5 and 6 bus bar from Victron Energy
For fuses of the Mega-Fuse type
Material: high-strength plastic mixture
About the mega fuse
Fuels of the MEGA-FUSE fuse are the patrol fuses and are screwed to the holder to ensure optimal contact. Corresponding nuts and sprinkling rings are already pre -assembled on the holder.
With mega fuses, up to 500a can be secured at 32V DC. Up to 300a are possible for the 58V variants.
32V mega-fuse fuses-60a to 500a58V mega-fuse fuses-125a to 300a
Scope of delivery:1x Victron CIP100200100 Modular Mega-Fuse Security Halter
data sheet
Generally
item number
8-67-010055
Manufacturer part number
CIP100200100
Manufacturer
Victron Energy
Weight
0,1
EAN
8719076018124
8-01-012825
Offgridtec 12-fold security holder for car flax protection with LED display
The 12-fold security holder from Offgridtec (MPN 012825) enables the professional distribution and protection of small and medium-sized consumers. He consolidates branches of branches and eliminates the mess of inline protection for electronics and other devices. In addition to the 12-pin fuse holder, 6 flax fuses of 5A-20A, type signs and screws include for attachment. The security holder consists of environmentally friendly PBT material with high mechanical strength, insulation, heat resistance and flame protection
Flax safety
The safety holder includes 24 flax fuses, including 6x 5a, 6x 10a, 6x 15a, and 6x 20a. The fuses correspond to the high offgridtec quality standards, have a long lifespan and offer a wide, acceptable temperature range. The connected lines can be identified and connected very easily with the included multifunctional labels. The integrated LED displays ensure additional protection. If a fuse is blown up, the red LED immediately lights up and you can quickly identify the error and fix it immediately.
High quality
The security holder is well protected by the clip lock protective cover. The insulating lid with a push-latch system can be easily opened by pressing. The transparent design offers your leaf backing additional protection. The owner consists of environmentally friendly PBT material with high mechanical strength, insulation, heat resistance and flame protection. Problems such as cracks, deformations, burns or short circuits hardly occur.
Assembly
The set also includes four stainless steel screws. These robust screws are corrosion -resistant and ensure long and safe assembly. The input and output connections of the safety holder are attached with quick assembly screws and the safety box is attached with the stainless steel screws, which makes installation easier and safer.
Technical specifications
Weight: 268.5g
Dimensions: 138.25 x 88 x 36.5 mm
Input voltage: 12V-32V DC
Input current: 100A
Nominal power output connections: max. 30A per circuit
Number of circuits/fuse plugs: 12
Main line connection: thread pencil M5
Main line: 4-6awg
Single line connection: M4 threaded bolt
Individual line: 12-16awg
Working temperature: -30 ° C - +85 ° C
Scope of delivery:
1x 12-pin fuse holder
6x 5a security sheet orange
6x 10a safety sheet red
6x 15a security sheet blue
6x 20a security sheet yellow
2x stickers
4x stainless steel screws
data sheet
Generally
item number
8-01-012825
Manufacturer part number
012825
delivery time
1-3 workdays
Product
Fuses
Manufacturer
Offgridtec
Input voltage area (V DC)
14 - 30 V/DC idle voltage
Areas of application
Mobile homes, boats and much more.
Dimensions (LXBXH)
138 x 88 x 37 mm
Weight
0.26 kg
EAN
4250983259513
8-01-013740
2-fold MEGA-Fuse Fuse holder with holder for spare fuse
The 2-compartment MEGA-Fuse fuse holder with cover is used for the safe installation of dc MEGA-Fuse strip fuses. The housing provides solid protection of the fuse from external influences. In addition, the fuse holder is equipped with a holder for spare fuses.
Article features at a glance:
500a max. current at max. 32v dc
300a max. current at max. 58v dc
for fuses type MEGA-Fuse
Material: high strength plastic compound
Dimensions: approx. 126 x 75 x 45 mm
Operating temperature range: -20°C - +150°C
Complies with iec 60497-3: 1999 + a1: 2001 + a2: 2005 in conjunction with iec 60947-1:2004
about the MEGA strip fuse:
MEGA-Fuse type fuses are among the strip fuses and are screwed to the holder to ensure optimum contact. Corresponding nuts and snap rings are already pre-mounted on the holder.
With MEGA fuses up to 500a can be fused at 32v dc. With the 58v variants up to 300a are possible.
Scope of delivery:
1xOffgridtec 2-bay MEGA-Fuse fuse holder (mpn anm-c2)
BS5191
Blue Sea BS5191 branch bolt holder for binding posts ABH 1 - 1-pole
The ABH 1 holder, specially designed for the SHB bolt fuses, enables the use of the space-saving SHB bolt fuses (MRBF = Marine Rated Bolt Fuses) thanks to the isolated bolt.For mounting on battery terminals with a screw diameter of 10 mm.Matching cable lugs with a hole diameter of 8mm. Technical data:Maximum operating voltage: 58V DCMaximum current load: 300AMaximum torque: 8.5 NmM8 threaded bolt Suitable for fuse type SHB (MRBF)ATTENTION: Delivery without fuse shown!
8-01-012826
Offgridtec 6-fold security holder for vehicle flax protection with LED display
The 6-fold security holder from Offgridtec (MPN 012826) enables the professional distribution and protection of small and medium-sized consumers. He consolidates branches of branches and eliminates the mess of inline protection for electronics and other devices. In addition to the 6-pin fuse holder, flax fuses of 5A-20A, type signs and screws for fastening. The security holder consists of environmentally friendly PBT material with high mechanical strength, insulation, heat resistance and flame protection
Flax safety
The safety holder includes 12 flax fuses, including 2x 5a, 2x 10a, 4x 15a, and 4x 20a. The fuses correspond to the high offgridtec quality standards, have a long lifespan and offer a wide, acceptable temperature range. The connected lines can be identified and connected very easily with the included multifunctional labels. The integrated LED displays ensure additional protection. If a fuse is blown up, the red LED immediately lights up and you can quickly identify the error and fix it immediately.
High quality
The security holder is well protected by the clip lock protective cover. The insulating lid with a push-latch system can be easily opened by pressing. The transparent design offers your leaf backing additional protection. The owner consists of environmentally friendly PBT material with high mechanical strength, insulation, heat resistance and flame protection. Problems such as cracks, deformations, burns or short circuits hardly occur.
Assembly
The set also includes four stainless steel screws. These robust screws are corrosion -resistant and ensure long and safe assembly. The input and output connections of the safety holder are attached with quick assembly screws and the safety box is attached with the stainless steel screws, which makes installation easier and safer.
Technical specifications
Weight: 176g
Dimensions: 87.75 x 85 x 36.5 mm
Input voltage: 12V-32V DC
Input current: 100A
Nominal power output connections: max. 30A per circuit
Number of circuits/fuse plugs: 6
Main line connection: thread pencil M5
Main line: 4-6awg
Single line connection: M4 threaded bolt
Individual line: 12-16awg
Working temperature: -30 ° C - +85 ° C
Delivery time: 1-3 working days
Scope of delivery:
1x 6-pin fuse holder 2x 5a security sheet orange 2x 10a safety sheet red 4x 15a security sheet blue 4x 20a security sheet yellow 2x stickers 4x screws
data sheet
Generally
item number
8-01-012826
Manufacturer part number
012826
delivery time
1-3 workdays
Product
Security holder
Manufacturer
Offgridtec
Input voltage area (V DC)
14 - 30 V/DC idle voltage
Areas of application
Mobile homes, boats and much more.
Dimensions (LXBXH)
88 x 85 x 37 mm
Weight
0.17 kg
EAN
4250983259544
TEXU400
Central electrics Texu400 - fuse holder, collective rails and more in one
Central electrics that replace the purchase of many individual components for the motorhome electronics and improve their application. For larger campers, residential and expedition mobile and electricity up to 400a. Village protected against combustible gases according to ISO 8846.
The Texu400 offers crucial advantages both in the self-made motorhome self-construction and the professional manufacturer:
saves over 50% installation space Compared to the use of conventional products,
Costs less money By unique merging functions in a single device and reducing the need for expensive raw materials (especially copper)
Less time and sources of error Due to the elevation of half of all cable crimples!
Texu400 central electrics for travel vehicle and boat
The Texu400 revolutionizes electrical installation. It combines different components that have been bought individually in a round overall housing, the use of space and the number of possible connections in the smallest space. The special arrangement, which is only available in the Texu400, enables system integration with groundbreaking low effort. This results in a drastic cost, time and space saving while reducing sources of error and maximum application comfort after installation.
Costs less
The Texu400 replaces the purchase of several expensive individual components. The unique, round arrangement in a single device also leads to a large saving of raw materials. Above all, the consumption of the strongly increased copper in the price could be reduced drastically. Functional mechanism and raw material savings lead to a significant cost saving compared to the purchase of conventional components to install a comparable system.
Saves space
The elimination of individual components and the patented design in a round shape not only saves money - it also requires much less installation space in travel vehicle or boat. Extensive, electrical systems can therefore be planned in a smaller room and the space obtained can be used for other purposes.
Saves working hours & sources of error
Instead of many individual components, only a single component is installed, which "incidentally" makes half of all cable crimples superfluous! It saves valuable working hours and other installation material. 50% less crimples also mean 50% less stress with compounds that (now or later) can cause problems. The complete installation is less prone to interference in one fell swoop.
Furthermore, stacking of cable shoes and inadequate mass distribution is finally a thing of the past. Compared to a angular structure with individual components, 46% of a valuable space in travel vehicles or boot is stored!
Texu400 components and functional overview
Shared minus collecting rail
Connection of up to 4 batteries.
11 high current and 4 standard consumers.
Plus rail for on-board batteries and consumers
Screw connections and fuses 2x mega / amg fuse max. 400a
9x midi / ami fuse max 170a
4x ATO / ATC / ATP fuse max. 30A
All connection bolts made of corrosion -resistant stainless steel. For high -current consumers, M8 bolts with flange mushrooms are intended to safely connect cable shoes of up to 70 mm².
1: 1 mass distribution
End with insufficient mass distributions! The Texu400 also includes a minus connection for every plus.
Easy integration of a sum current measurement
The Sunt Bridge between the minus collection rails installed ex works can easily be removed by screwing and replaced by a plastic bridge contained in the scope of delivery in order to enable the fast and uncomplicated integration of a measuring shunt.
Mega security with double input
New on the market: The Texu400 contains a mega safety area with a double screw connection. Where cable shoes have been stacked so far or other suboptimal constructions had to be conceived from case to a case (e.g. in the case of clamped cables of powerful inverters), there is now a professional solution: a mega safety area with max. 400A and double screw connection, ensures professional and safe installation of such Components.
Village protected according to ISO 8846
The UFO is with the integrated, all -round bridge with poetry according to ISO 8846. It is therefore also approved for assembly in the engine compartment.
LED failure control with light ladders
Immediate diagnosis. Light guide have the LED failure control illuminated directly at the label of the circuits in the closed lid. Remove fuses and search upside down in narrow points for mistakes you can save yourself! A prefabricated labeling with some individually designed content is included in the scope of delivery of the Texu400.
Space for replacement backups
The Texu400 contains additional slots for replacement backups (1x mega, 2x MIDI, 2x ATO/ATC/ATP)
Comfortable opening and closing
The knob, arranged in the middle of the housing cover, can easily open and close the cover and even make one -handed operation possible in cramped space.
Texu400 central electrics for travel vehicle and boat
The Texu400 revolutionizes electrical installation. It combines different components that have been bought individually in a round overall housing, the use of space and the number of possible connections in the smallest space. The special arrangement, which is only available in the Texu400, enables system integration with groundbreaking low effort. This results in a drastic cost, time and space saving while reducing sources of error and maximum application comfort after installation.
Costs less
The Texu400 replaces the purchase of several expensive individual components. The unique, round arrangement in a single device also leads to a large saving of raw materials. Above all, the consumption of the strongly increased copper in the price could be reduced drastically. Functional mechanism and raw material savings lead to a significant cost saving compared to the purchase of conventional components to install a comparable system.
Saves space
The elimination of individual components and the patented design in a round shape not only saves money - it also requires much less installation space in travel vehicle or boat. Extensive, electrical systems can therefore be planned in a smaller room and the space obtained can be used for other purposes.
Saves working hours & sources of error
Instead of many individual components, only a single component is installed, which "incidentally" makes half of all cable crimples superfluous! It saves valuable working hours and other installation material. 50% less crimples also mean 50% less stress with compounds that (now or later) can cause problems. The complete installation is less prone to interference in one fell swoop.
Furthermore, stacking of cable shoes and inadequate mass distribution is finally a thing of the past. Compared to a angular structure with individual components, 46% of a valuable space in travel vehicles or boot is stored!
Texu400 components and functional overview
Shared minus collecting rail
Connection of up to 4 batteries.
11 high current and 4 standard consumers.
Plus rail for on-board batteries and consumers
Screw connections and fuses 2x mega / amg fuse max. 400a
9x midi / ami fuse max 170a
4x ATO / ATC / ATP fuse max. 30A
All connection bolts made of corrosion -resistant stainless steel. For high -current consumers, M8 bolts with flange mushrooms are intended to safely connect cable shoes of up to 70 mm².
1: 1 mass distribution
End with insufficient mass distributions! The Texu400 also includes a minus connection for every plus.
Easy integration of a sum current measurement
The Sunt Bridge between the minus collection rails installed ex works can easily be removed by screwing and replaced by a plastic bridge contained in the scope of delivery in order to enable the fast and uncomplicated integration of a measuring shunt.
Mega security with double input
New on the market: The Texu400 contains a mega safety area with a double screw connection. Where cable shoes have been stacked so far or other suboptimal constructions had to be conceived from case to a case (e.g. in the case of clamped cables of powerful inverters), there is now a professional solution: a mega safety area with max. 400A and double screw connection, ensures professional and safe installation of such Components.
Village protected according to ISO 8846
The UFO is with the integrated, all -round bridge with poetry according to ISO 8846. It is therefore also approved for assembly in the engine compartment.
LED failure control with light ladders
Immediate diagnosis. Light guide have the LED failure control illuminated directly at the label of the circuits in the closed lid. Remove fuses and search upside down in narrow points for mistakes you can save yourself! A prefabricated labeling with some individually designed content is included in the scope of delivery of the Texu400.
Space for replacement backups
The Texu400 contains additional slots for replacement backups (1x mega, 2x MIDI, 2x ATO/ATC/ATP)
Comfortable opening and closing
The knob, arranged in the middle of the housing cover, can easily open and close the cover and even make one -handed operation possible in cramped space.
Please Note: Since individual electrical systems contain different components that have to be secured appropriately, no prefabricated security rate is included directly in the scope of delivery of the Texu400. Of course you will find fuses and other installation material in our shop.
BS5025
Blue Sea fuse box 6 circuits and ground
Delivery time: 5-6 working days
Fuse box for vehicle flat plug fuses, with 6 circuits and minus connections
- Tinned copper busbars with screw terminals
- Housing made of resistant polycarbonate
- Frosted cover with space for two spare fuses
- Some with integrated negative busbar, on both sides
- Maximum current per circuit 30A, total max. 100A
- Maximum voltage 32V DC
- Dimensions (WxHxD): 84.20 x 124.31 x 38.57 mm
Delivery is without circuit identification and without fuses
2251
Votronic high-load safety holder with lid
Delivery time on request
Fully isolated security holder for high-speed protection to secure large consumers or high-load circuits. The safety holder is equipped with M8 thread on both sides. You can find the right high -speed security here.
Delivery takes place without a high -speed protection. Dimensions: 122 x 42 x 39mm
BS5065
Blue Sea ato in-line security holder
Waterproof in-line security holder for ATO® fuses. Length of the connection lines approx. 13 cm long, line cross -section AWG 14 or 3.3 mm². Suitable for max. 30 a backup (not included in the scope of delivery). Weight: 0.09 kg.
NoticeFor connection, squeezing connectors or ring cable shoes with yellow color coding are required. These are suitable for 2.5-6 mm² line cross-sections. For example, queksch connector Article no. 63732, ring cable shoes M4 = item no. 63748, M5 = 63774, M6 = 63737, M8 = 63738, M10 = 63758.
082000260
PHILIPPI - PLUS fuse bar EBF6
PHILIPPI - Power Install System 250
PLUS safety rail for 5x SHB bolt safety devices. Current carrying capacity 250 A, max. fuse 200 A. M10 supply bolt, M8 safety bolt. Dimensions L 212 x W 40 x H 50 mm
Delivery without fuse!
The installation of high-current components such as main switches and fuses is a space-consuming and time-consuming task, since the individual components can often only be connected using flexible cables due to mechanical differences. Our newly developed main distribution system saves an enormous amount of space, time and money. It also increases security, as all connections are connected to one another using suitable copper straps. The central components are the mechanically switchable (EBH 250) or the electrically remote-controlled main battery switch (FBR/TSA/FBC 265). The subsequent protection can be done with the ESH strip fuse holder or the EBF bolt fuse holder.
A fuse block ESF can be mounted at the input and output of the main battery switch in order to supply measuring lines and consumers such as bilge pumps, chargers or heaters with a permanent plus. The current carrying capacity of the system is 250 A and is suitable for DC 12 V and 24 V.
By combining several components, a compact main power distribution for the starter and consumer battery can be set up, which can also be supplemented with an emergency switch to start the engine via the consumer battery. Alternatively, a charging relay can also be used. Mechanical or remote-controlled main switches (FBA / TSA / FBC) can be used. Fuse blocks can be attached to the main switch outputs to protect the main lines. Small fuse blocks can be added to the side to protect permanently plus consumers. The connection is made with the appropriate connecting straps.
VBB160040010
Victron Busbar 600A 4P + Cover
Victron Busbar 600A 4P + CoverSammelschienen sind metallische Leiterbahnen zur elektrischen Energieverteilung. Sie werden für die Distribution von Hochstrom verwendet und dienen gleichzeitig als Anschlüsse für Batterien bzw. Gleichstromgeräte. Ein feines Netzwerk aus Busbars und Kontaktfingern ermöglicht außerdem die effiziente Verbindung von Solarzellen.
ÜberblickOptimierung des Leistungsflussesgeringer elektrischer Widerstandhöhere LeitfähigkeitJede Sammelschiene ist mit einer abnehmbaren Schutzabdeckung ausgestattet. An jedem Ende der schwarzen ABS-Basis befinden sich Befestigungslöcher. Außerdem ist die Busbar für Spannungen von bis zu 70 Volt geeignet.
Lieferumfang:1x Victron Busbars 600A, 4P