Storage Systems
4-01-019530-003
Offgridtec backup kit Pytes V5a battery - Victron MultiPlus II 48/3000 inverter 3-phase 10.24 kWh, with electricity meter
Offgridtec backup kit replacement set 5.12 kWh or 10.24kWh with Pytes V5a battery - Victron Multiplus II 48/3000 3-phase, with or without power meter
The 3-phase backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems include lithium-ion batteries from Pytes, the matching MultiPlus-II inverters and a Cerbo GX MK2 from Victron Energyfor system monitoring. This allows you to secure your energy supply even in the event of a power failure.
With the Pytes batteries, you have a storage capacity of 5.12 kWh to 10.24 kWh to use your energy efficiently and remain self-sufficient for longer if necessary. Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains fault and takes over the supply to the connected consumers. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Applications of the Offgridtec backup kit:Emergency power supplyOff-grid solar systems (stand-alone systems)Repowering existing PV systemsGrid-connected power supplyUPS systems
Parts list:- Pytes V5a LiFePO4 battery 5.12kWh 51,2V 100Ah (depending on selection 1x or 2x) - 3x Victron MultiPlus-II 48/3000/35-32 230V- 1x Victron Cerbo GX MK2 Communication center Systemüberwachung- 1x Victron GX Touch 50 display panel für Cerbo GX- 2x Victron Lynx Distributor (M8)- 1x Victron MK3-USB VE.Bus to USB Interface- 3x Offgridtec® 1m battery cable 35mm² on both sides M8 Ösen- 2x 0,9m Victron RJ45 UTP cable- 1x 3m Victron RJ45 UTP cable- 3x Offgridtec set of 5 MEGA fuse 125A 70V für 48V systems- 1x Pytes data cable battery to Victron GX 3,5m- Pytes battery connection cable set V5a 2m M10 50mm² to Amphenol 10mm (1x or 2x depending on selection)
When selecting power meter1x Victron VM-3P75CT Energy Meter1x Victron 5m RJ45 UTP cable
Extended use of your backup systemThe backup kit is supplied either with or without Victron power meters and cables, whereby one power meter is required for the setup of an energy storage system.
With this energy meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for single-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.In order for an ESS to be taken into account in the pre-configuration, the meter must be purchased in advance or with the system!
The storage solution - Pytes V5aThe V5 alpha battery module from Pytes (MPN 110402100134) is equipped with the latest LiFePO4 cell technology and offers you a very long service life with high cycle stability. With a nominal voltage of 51.2V and a capacity of 5.12kWh, the battery provides you with outstanding performance under high loads. They are very easy to install and can be extended up to 430kWh. In addition to these advantages, the home storage systems have intelligent monitoring and control functions that allow you to make optimum use of your energy consumption and display it in real time.
Technical data:Battery chemistry: LiFePO4Nominal voltage: 51.2 VVoltage range: 44.8 - 57.6 VNet capacity: 100 AhNominal energy: 5.12 kWhRecommended charge current/discharge current: 75 AMax. continuous charge/discharge current: 100 APeak charge/discharge: 150 A (15 sec.)Operating temperature range: -10°C - +55°CHeating system: 8-10°C/hWeight: 44 kgDimensions: 440 x 530 x 140 mmThe electronic core - the Victron Multiplus-II device;device combinationThe Multiplus-II is a high-end device combination from Victron Energy, consisting of a 48V battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This expands the PowerControl and PowerAssist functions to 50A and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid systems for the power supply.
3000W power with non-linear load2400W continuous load - 6000W peak powerfor 48V battery voltage32A transfer switch35A battery chargerOutput voltage: 230 VAC, frequency: 50 Hzmax. efficiency: 95%Protection class: IP22
Configuration:The MultiPlus-II is delivered unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system for you, we can do this for you for an additional charge. To do this, place the "Offgridtec pre-configuration" item linked above in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed.
System monitoring with the Victron Cerbo GX MK2 and GX Toch displayWith the Cerbo GX MK2 communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo GX MK2, you can control your system from anywhere. With the GX Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.
Safety note: Only have this complete system installed and commissioned by a qualified electrician.
Variants from €3,603.39*
4-01-019515-002
Offgridtec backup kit Pytes V5a battery - Victron MultiPlus II 48/3000 inverter 1-phase, 5.12 kWh, without electricity meter
Offgridtec backup kit 5.12 or 10.24kWh Pytes V5a battery - Victron MultiPlus II 48/3000 inverter 1-phase, with or without power meter
The 1-phase backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems include lithium-ion batteries from Pytes, the matching MultiPlus-II inverters and a Cerbo GX MK2 from Victron Energyfor system monitoring. This allows you to secure your energy supply even in the event of a power failure.With the Pytes batteries, you have a storage capacity of 5.12kWh to 10.24kWh to use your energy efficiently and remain self-sufficient for longer if required. Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains fault and takes over the supply to the connected consumers. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Field of application:Emergency power supplyOff-grid solar systems (stand-alone systems)Repowering existing PV systemsGrid-connected power supplyUPS systems
Parts list:Pytes V5a LiFePO4 battery 5.12kWh 51,2V 100Ah (depending on selection 1x or 2x) 1x Victron MultiPlus-II 48/3000/35-32 230V1x Victron Lynx Distributor (M8)1x Victron Cerbo GX MK2 Communication Center Systemümonitoring1x Victron GX Touch 50 display panel für Cerbo GX1x 3m Victron RJ45 UTP cable1x Offgridtec® 1m battery cable 35mm² on both sides M8 Ösen1x Offgridtec 5-piece set MEGA fuse 125A 70V für 48V systems1x Pytes data cable battery to Victron GX 3,5mPytes battery connection cable set V5a 2m M10 50mm² to Amphenol 10mm (1x or 2x depending on selection)
The Multiplus device combination is preconfigured to fit the Pytes batteries.When selecting power meters1x Victron VM-3P75CT Energy Meter1x Victron 5m RJ45 UTP cable
Extended use of your backup systemThe backup kit is supplied either with or without Victron power meters and cables, whereby a power meter is mandatory for setting up an energy storage system.
With this energy meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for single-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.In order for an ESS to be taken into account in the pre-configuration, the meter must be purchased in advance or with the system!
The storage solution - Pytes V5aThe V5 alpha battery module from Pytes is equipped with the latest LiFePO4 cell technology and offers you a very long service life with high cycle stability. With a nominal voltage of 51.2V and a capacity of 5.12kWh, the battery provides you with outstanding performance under high loads. They are very easy to install and can be expanded up to 430kWh. In addition to these advantages, the home storage systems have intelligent monitoring and control functions that allow you to make optimum use of your energy consumption and display it in real time.
Technical data:Battery chemistry: LiFePO4Nominal voltage: 51.2 VVoltage range: 44.8 - 57.6 VMains capacity: 100 AhNominal energy: 5.12 kWhRecommended charge/discharge current: 75 AMax. continuous charge/discharge current: 100 APeak charge/discharge: 150 A (15 sec.)Operating temperature range: -10°C - +55°CHeating system: 8-10°C/hWeight: 44 kgDimensions: 440 x 530 x 140 mm
The electronic core - the Victron Multiplus-II device combinationThe Multiplus-II is a high-end device combination from ;combination from Victron Energy, consisting of a 48V battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This expands the PowerControl and PowerAssist functions to 50A and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid systems for the power supply.
3000W power with non-linear load2400W continuous load - 6000W peak powerfor 48V battery voltage32A transfer switch35A battery chargerOutput voltage: 230 VAC, frequency: 50 Hzmax. efficiency: 95%Protection class: IP22
System monitoring with the Victron Cerbo GX MK2 and GX Touch DisplayWith the Cerbo GX MK2 communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo GX, you can control your system from anywhere. With the GX Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.
Safety note: Only have this complete system installed and commissioned by a qualified electrician.
4-01-014590-001
Offgridtec backup kit Pylontech LiFePO4 battery - Victron MultiPlus II 48/10000 inverter 3-phase 19.2 kWh
Offgridtec backup kit replacement set 19.2 kWh or 28.8kWh with Pylontech LiFePO4 battery - Victron Multiplus II 48/10000 3-phase inverterThe backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a matching MultiPlus-II inverter and a Cerbo GX MK2 for system monitoring from Victron Energy. This allows you to ensure your energy supply even in the event of a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a power failure and takes over the supply to the connected loads. The switchover occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Applications of the Offgridtec backup kit:Emergency power supplyOff-grid solar systems (stand-alone systems)Back-up of existing PV systemsGrid-connected power supplyUPS systems
Parts list:Pylontech US5000 4,8kWh LiFePO4 battery (depending on selection 4x or 6x)3x Victron MultiPlus-II 48/10000/140-100 230V device;combination2x Victron Lynx Distributor1x Victron Lynx Power In1x Victron Cerbo GX MK2 Control panel1x Victron GX Touch 50 display panel für Cerbo GX1x 1.8m VE.Can to Can-Bus BMS type A cable1x 3m Victron RJ45 UTP cable2x 0,9m Victron RJ45 UTP cable6x 1m Offgridtec battery cable 50mm² M8-Ösen4x Pylontech battery connection cable set2x Offgridtec 5-piece set MEGA fuse 200A
The Multiplus device combination is preconfigured to fit the Pylontech batteries.
Extended use of your backup system:In order to set up an ESS (Energy Storage System) with the backup system, one energy meter with connection cable is required (Victron VM-3P75CT Energy Meter 3-phase power meter;meter 75A/phase and a5m Victron RJ45 UTP cable)With a power meter you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for single-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.
In order for an ESS to be taken into account in the pre-configuration, the meter must be purchased in advance or for the system!
The storage solution - Pylontech US5000 rechargeable batteriesThe Pylontech US5000 storage battery is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage systems. Thanks to state-of-the-art technology, maximum safety and a long service life are guaranteed even with regular deep discharges.
Extremely cycle-proof - over 6000 cycles at 95% DoDAbsolutely intrinsically safe lithium technologyHigh charging and discharging performance possible;possibleIntegrated BMSVery high storage density - low weight and compact designAbsolutely maintenance-free and durablePre-charge function to protect the ESS system from overvoltage
The electronic core - the Victron Multiplus-II device combinationThe Multiplus-II is a high-end device combination from Victron Energy, consisting of a 48V battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This extends the PowerControl and PowerAssist functions to 50A and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid systems for the power supply.
10000W power with non-linear load - 8000W continuous load - 18000W peak powerfor 48V battery voltage100A transfer switch140A battery chargerOutput voltage: 230 VAC, frequency: 50 Hzmax. efficiency: 95%Protection class: IP22
System monitoring with the Victron Cerbo GX and GX Toch displayWith the Cerbo GX MK2 communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo GX MK2, you can control your system wherever you are. With the GX Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.
4-01-019540-002
Offgridtec backup kit retrofit kit with Pytes 48100R-C battery Victron MultiPlus-II 48/5000 3-phase 20.5 kWh, without electricity meter
Offgridtec backup kit replacement set 20.5 kWh or 30.7 kWh with Pytes 48100R-C battery Victron Multiplus II 48/5000 3-phase, with or without power meter
The 3-phase backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems include lithium-ion batteries from Pytes, the matching MultiPlus-II inverters and a Cerbo GX MK2 from Victron Energyfor system monitoring. This allows you to secure your energy supply even in the event of a power failure.With the batteries from Pytes, you have a storage capacity of 20.5 kWh to 30.7 kWh, depending on your choice, to use your energy efficiently and remain self-sufficient for longer if required. Thanks to the extensive capacity, the system is perfect for large solar systems. The UPS function of the MultiPlus ensures that the supply to the connected consumers is maintained even in the event of a grid fault. The switchover takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Application areas:Emergency power supplyPerfectly suited for large solar systemsIndependent solar systems (off-grid systems)Retrofitting existing PV systemsGrid-connected power supplyUPS systems
Parts list:Pytes E-Box-48100R-C 100Ah 51V LiFePO4 battery (depending on selection 4 or 6x) 3x Victron MultiPlus-II 48/5000/70-50 230V1x Victron Cerbo GX MK2 Communication center Systemüberwachung1x Victron GX Touch 50 display panel für Cerbo GX1x Victron Energy Lynx Power In (M8)1x Victron Lynx Distributor (M8)2x 0,9m Victron RJ45 UTP cable1x 3m Victron RJ45 UTP cable1x Victron MK3-USB VE.Bus to USB Interface1x Pytes Data Cable Battery to Victron Inverter 3,5m MultiPlus 2Pytes Battery Inverter Power Cable 2m, positive(depending on selection 2-3x)Pytes battery inverter power cable 2m, negative (depending on selection 2-3x)2x Offgridtec set of 5 MEGA fuse 100A 70V füfor 48V systems3x Offgridtec® 1m battery cable 50mm² M8 on both sides Öhler1x Victron VM-3P75CT Energy Meter1x 5m Victron Energy RJ45 UTP cable
Extended use of your backup systemThe backup kit can be supplied with or without Victron power meters and cables. However, an energy meter is essential for setting up an energy storage system.
With this energy meter, you can carry out a grid-parallel installation and then monitor your energy consumption and energy costs. Thanks to phase compensation, it is also possible to use the 3-phase meter in 1-phase systems. This enables the seamless integration of decentralized energy sources and consumers into the existing power grid.In order for an ESS to be taken into account in a pre-configuration, the meter must be purchased in advance or for the system!
The storage solution - Pytes E-Box-481000R-C:The Pytes E-BOX 48100R-C is a state-of-the-art LFP battery with a capacity of 100 Ah. It impresses with its high level of safety, sophisticated design and impressive performance. This compact battery is easy to install, requires no maintenance and can be used as a basic component of an energy storage system by connecting it in parallel.
Technical data:Battery chemistry: Lithium iron phosphate (LFP)Nominal voltage: 51.2 VVoltage range: 47.5-57.6 VNominal power: 100 AhNominal energy: 5.12 kWhMax. Charging current: 50 AMax. Discharge: 50 ACharging temperature: 0~50°CDischarging temperature: -10~50°CEfficiency: ≥95%Communication protocol: RS-232, RS-485, CANCycle life: >6000 cycles at 90% DoDDimensions: 440 x 620 x 117 mmWeight: 51 kg
The electronic core - the Victron Multiplus-II device combinationThe Multiplus-II is a high-end device combination from Victron Energy, which combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 100 A and expands the potential range of use to ESS applications.
5000 W power with non-linear load4000 W continuous load and 9000 W peak powerfor 48V battery voltage50A transfer switch70A battery chargerOutput voltage: 230 VAC, frequency: 50 Hzmax. efficiency: 95%Protection class: IP22
Configuration:The MultiPlus-II is delivered unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system, we can do this for you for an additional charge. To do this, add the item "Offgridtec pre-configuration" to the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed.
System monitoring with the Victron Cerbo GX MK2 and GX Toch displayWith the Cerbo GX MK2 communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo GX MK2, you can control your system from anywhere. With the GX Touch 50 display, you always have all the parameters of your system in view and can make changes quickly and easily.
Safety note: Only have this complete system installed and commissioned by a qualified electrician.
4-01-019525-002
Offgridtec backup kit retrofit kit with Pytes E-Box 48100R-C battery Victron Multiplus II 48/10000 3-phase, 61.4 kWh, without electricity meter
Offgridtec backup kit replacement set 61.4 kWh or 71.7kWh with Pytes E-Box 48100R-C battery Victron Multiplus II 48/10000 3-phase, with or without power meter
The 3-phase backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems include lithium-ion batteries from Pytes, the matching MultiPlus-II inverters and a Cerbo GX MK2 from Victron Energyfor system monitoring. This allows you to secure your energy supply even in the event of a power failure.With the batteries from Pytes, you have a storage capacity of 61.44 kWh to 71.68 kWh, depending on your choice, to use your energy efficiently and remain self-sufficient for longer if required. Thanks to the extensive capacity, the system is perfect for large solar systems. The UPS function of the MultiPlus ensures that the supply to the connected consumers is maintained even in the event of a grid fault. The switchover takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Application areas:Emergency power supplyPerfectly suited for large solar systemsIndependent solar systems (stand-alone systems)Repowering existing PV systemsGrid-connected power supplyUPS systems
Parts list:- Pytes E-Box-48100R-C 100Ah 51V LiFePO4 battery (12 or 14x depending on selection) - 3x Victron MultiPlus-II 48/10000/140-100/100 230V- 1x Victron Energy Lynx Distributor (M8)- 1x Victron Energy Lynx Power In (M8)- 1x 3m Victron Energy RJ45 UTP cable- 6x Offgridtec 1m battery cable 50mm²- 1x Victron Cerbo GX MK2 communication center Systemümonitoring- 1x Victron GX Touch 50 display panel für Cerbo GX- 2x 5er Set Offgridtec MEGA Fuse 200A 70A- 1x Pytes data cable battery to Victron Inverter 3,5m MultiPlus 2- 6x Pytes battery inverter power cable 2m, positive- 6x Pytes battery inverter power cable 2m, negative- 2x 0.9m Victron RJ45 UTP cable- 1x Victron MK3-USB VE.Bus to USB Interface
The Multiplus device combination is preconfigured to suit the Pytes batteries.When selecting a power meter1x Victron VM-3P75CT power meter 75A/phase 3-phase1x 3m Victron Energy RJ45 UTP cable
Extended use of your backup systemThe backup kit can be supplied with or without Victron power meters and cables. However, an energy meter is essential for setting up an energy storage system.
With this energy meter, you can carry out a grid-parallel installation and then monitor your energy consumption and energy costs. Thanks to phase compensation, it is also possible to use the 3-phase meter in 1-phase systems. This enables the seamless integration of decentralized energy sources and consumers into the existing power grid.In order for an ESS to be taken into account in a pre-configuration, the meter must be purchased in advance or for the system!
Application areas:Thanks to its high storage capacity, the Offgridtec backup system is ideal for use in large solar systems.- Private households: Large family and multi-family homes to meet daily energy needs and keep essential appliances running during power outages.- Commercial businesses: retail stores and construction sites to keep operations running during power outages and avoid financial losses.- Agriculture: Farmers can use it to safely operate irrigation systems and electrical machinery, even in remote areas without access to grid power.- Municipalities and emergency management: Essential for services and emergency centers to ensure energy supply in crisis situations.
The storage solution - Pytes E-Box-481000R-C:The Pytes E-BOX 48100R-C is a state-of-the-art LFP battery with a capacity of 100 Ah. It impresses with its high level of safety, sophisticated design and impressive performance. This compact battery is easy to install, requires no maintenance and can be used as a basic component of an energy storage system by connecting it in parallel.
Technical data:Battery chemistry: Lithium iron phosphate (LFP)Nominal voltage: 51.2 VVoltage range: 47.5-57.6 VNominal power: 100 AhNominal energy: 5.12 kWhMax. Charging current: 50 AMax. Discharge: 50 ACharging temperature: 0~50°CDischarging temperature: -10~50°CEfficiency: ≥95%Communication protocol: RS-232, RS-485, CANCycle life: >6000 cycles at 90% DoDDimensions: 440 x 620 x 117 mmWeight: 51 kg
The electronic core - the Victron Multiplus-II device combinationThe Multiplus-II is a high-end device combination from Victron Energy, which combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 100 A and expands the potential range of use to ESS applications.
10000 W power with non-linear load8000 W continuous load and 18000 W peak powerfor 48V battery voltage100A transfer switch140A battery chargerOutput voltage: 230 VAC, frequency: 50 Hzmax. efficiency: 95%Protection class: IP22
System monitoring with the Victron Cerbo GX MK2 and GX Toch display
With the Cerbo GX MK2 communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo GX MK2, you can control your system from anywhere. With the GX Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.
Safety note: Only have this complete system installed and commissioned by a qualified electrician.
4-01-015805-001
Offgridtec 3-phase backup kit with Pylontech US3000C Victron MultiPlus-II 48/5000 7 kWh battery
Offgridtec backup kit 3-phase 7kWh or 14kWh or 21 kWh with Pylontech US3000C battery Victron MultiPlus II 48/5000The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems contain lithium-ion batteries from Pylontech, a matching MultiPlus II inverter and a Cerbo GX MK2 for system monitoring from Victron Energy. This allows you to secure your energy supply even in the event of a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply to the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Application areas of the Offgridtec backup kit:Emergency power supplyOff-grid solar systems (stand-alone systems)Back-up of existing PV systemsGrid-connected power supplyUPS systems
Parts list:Pylontech US3000C 3.5kWh LiFePO4 battery (depending on selection 2x, 4x or 6x) 3x Victron MultiPlus-II 48/5000/70-50 230V device;combination2xVictron Lynx Distributor1x Victron Cerbo GX MK2 control panel1x Victron GX Touch 50 display panel für Cerbo GX1x Victron MK3-USB Ve.Bus to USB Interface1x 1,8m VE.Can to Can-Bus BMS type A cable2x 0,9m Victron RJ45 UTP cable1x 3m Victron RJ45 UTP cable3x 1m Offgridtec battery cable 50mm² M8-Ösen3x 5pcs MEGA fuse set 200A 70VPylontech battery connection cable set (1x or 2x depending on selection)
Extended use of your backup system:In order to be able to set up an ESS (Energy Storage System) with the backup system, one energy meter with connection cable is required (Victron VM-3P75CT Energy Meter 3-phase power meter 75A/phase and one energy meter 75A/phase);meter 75A/phase and a5m Victron RJ45 UTP cable)With a power meter you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for single-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.
In order for an ESS to be taken into account in the pre-configuration, the meter must be purchased in advance or for the system!
The storage solution - Pylontech US3000C batteriesThe US3000C storage battery is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage systems. Thanks to state-of-the-art technology, maximum safety and a long service life are guaranteed even with regular deep discharges.
Extremely cycle-proof - over 6000 cycles at 95% DoDAbsolutely intrinsically safe lithium technologyHigh charging and discharging performance possible;possibleIntegrated BMSVery high storage density - low weight and compact designAbsolutely maintenance-free and durablePre-charge function to protect the ESS system from overvoltage function
The electronic core - the Victron Multiplus-II device combination:The Multiplus-II 48/5000/70-50 is a high-end device combination from Victron Energy that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 100 A and extends the potential range of use to ESS applications. The inverter module delivers a full 5000 W with a non-linear load and 4000 W with a linear continuous load. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, which can be used to switch back and forth between the AC connections at lightning speed.
Important performance features of the Multiplus-II 48/5000/70-50:PowerControl and PowerAssist -increase of mains or generator powerbuilt-in anti-islanding function and connection option for external current sensor (optional)can be used as a backup device in grid-connected systems;can be used as a backup device in grid-connected systems for power supply in the event of grid failurescan be used in various ESS (Energy Storage System) applicationsbest suited for professional seafaring, yachts, vehicles and land-based, off-grid applicationsVE.Bus interface for parallel and three-phase operation, remote monitoring and system integrationpractically unlimited power through parallel and three-phase operationcan be configured on site or remotely using VEConfigure software
Always enough power thanks to PowerControl and PowerAssist:A maximum mains or generator current can be set on the MultiPlus-II 48/5000/70-50. The MultiPlus-II then takes other connected AC consumers into account and only uses the current that is still "available" to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The PowerAssist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such cases, the MultiPlus-II immediately compensates for insufficient generator, shore power or mains power with energy from the battery. If the load is reduced, i.e. consumers are switched off, the available energy can then be used to charge the batteries again.
Maximum flexibility thanks to two AC outputs:The main output ensures uninterrupted operation. In the event of a mains failure or an interruption in the shore/generator power, the MultiPlus-II takes over the supply to the connected loads. The switchover takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power if alternating current is available at the input of the MultiPlus-II. Consumers that are not allowed to discharge the battery, such as a water heater, can be connected to this output.
Remote configuration and monitoring:Install a Color Control GX or other GX products to connect to the Internet. The operating data can be saved and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed.
The MultiPlus-II is delivered unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system, we can do this for you for an additional charge. To do this, place the "Offgridtec pre-configuration" item linked above in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been carried out.
Technical features5000 W power with non-linear load 4000 W continuous load and 9000 W peak powerfor 48 V battery voltage, 50 A transfer switch and 70 A battery chargerOutput voltage: 230 VAC, frequency: 50 Hzmax. efficiency is 95%, protection class IP22
System monitoring with the Victron Cerbo GX MK2 and GX Toch displayWith the Cerbo GX MK2 communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo GX MK2, you can control your system from anywhere. With the GX Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.
Safety note: Only have this complete system installed and commissioned by a qualified electrician.
4-01-015810-001
Offgridtec 3-phase backup kit with Pylontech US5000 battery Victron MultiPlus-II 48/8000 19.2 kWh
Offgridtec 3-phase backup kit with 19.2kWh or 28.8 kWh or 38.4kWh with Pylontech US5000 Victron MultiPlus-II 48/8000 batteryThe backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a suitable MultiPlus-II inverter and a Cerbo GX MK2 for system monitoring. This allows you to secure your energy supply even in the event of a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply to the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Applications of the Offgridtec backup kit:Emergency power supplyOff-grid solar systems (stand-alone systems)Back-up of existing PV systemsGrid-connected power supplyUPS systems
Parts list:Pylontech US5000C 3,5kWh LiFePO4 battery (depending on selection 4x, 6x or 8x) 3x MultiPlus-II 48/8000/110-100/100 230V device combination;combination2x Victron Lynx Distributor1x Victron Cerbo GX MK2 Control panel1x Victron GX Touch 50 display panel for Cerbo GX1x Victron MK3-USB Ve.Bus to USB Interface1x 1,8m VE.Can to Can-Bus BMS type A cable2x 0,9m Victron RJ45 UTP cable1x 3m Victron RJ45 UTP cable6x 1m Offgridtec battery cable 35mm² M8-Ösen6x 200A 70V MEGA fuse2x Pylontech battery connection cable set
Extended use of your backup system:In order to set up an ESS (Energy Storage System) with the backup system, one energy meter with connection cable is required (Victron VM-3P75CT Energy Meter 3-phase power meter 75A/phase);meter 75A/phase and 5m Victron RJ45 UTP cable)With this power meter you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for single-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.
In order for an ESS to be taken into account in the pre-configuration, the meter must be purchased in advance or for the system!
The storage solution - Pylontech US5000C batteries:The US3000C storage battery is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage systems. Thanks to state-of-the-art technology, maximum safety and a long service life are guaranteed even with regular deep discharges.
Extremely cycle-proof - over 6000 cycles at 95% DoDAbsolutely intrinsically safe lithium technologyHigh charging and discharging performance possibleIntegrated BMSVery high storage density - low weight and compact design
Absolutely maintenance-free and durable
4-01-013725-001
Offgridtec backup kit Pylontech LiFePO4 battery - Victron MultiPlus II 48/5000 inverter 1-phase 7 kWh
Offgridtec backup kit 7kWh or 14kWh Pylontech LiFePO4 battery - Victron MultiPlus II 48/5000 inverter 1-phaseThe backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems contain lithium-ion batteries from Pylontech, a matching MultiPlus-II inverter and a Cerbo GX MK2 for systemümonitoring from Victron Energy. With this you can ensure your energy supply even if there is a power outage
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a power failure and takes over the supply to the connected loads. The switchover occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Applications of the Offgridtec backup kit:Emergency power supplyOff-grid solar systems (stand-alone systems)Back-up of existing PV systemsGrid-connected power supplyUPS systems
Parts list:Pylontech US3000C 3,5kWh LiFePO4 battery (depending on selection 2x or 4x)1x Victron MultiPlus-II 48/5000/70-50 230V device;combination1x Victron Lynx Distributor1x Victron Cerbo GX MK2 control panel1x Victron GX Touch 50 display panel für Cerbo GX1x 1.8m VE.Can to Can-Bus BMS type A cable1x 3m Victron RJ45 UTP cable1x 1m Offgridtec battery cable 50mm² M8-Ösen1x 200A 70V MEGA fuse1x Pylontech battery connection cable set
The Multiplus device combination is pre-configured to fit the Pylontech batteries.
Extended use of your backup system:In order to set up an ESS (Energy Storage System) with the backup system, an energy meter with connection cable is required (Victron VM-3P75CT Energy Meter 3-phase current meter 75A/phase and Victron VM-3P75CT Energy Meter 3-phase current meter 75A/phase and Victron VM-3P75CT Energy Meter 75A/phase and Victron VM-3P75CT Energy Meter 75A/phase and Victron VM-3P75CT Energy Meter 75A/phase;meter 75A/phase and 5m Victron RJ45 UTP cable)With this energy meter you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for single-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.
In order for an ESS to be taken into account in the pre-configuration, the meter must be purchased in advance or for the system!
The storage solution - Pylontech US3000C batteriesThe US3000C storage battery is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage systems. Thanks to state-of-the-art technology, maximum safety and a long service life are guaranteed even with regular deep discharges.
Extremely cycle-resistant - over 6000 cycles at 95% DoDAbsolutely intrinsically safe lithium technologyHigh charging and discharging performance possible;possibleIntegrated BMSVery high storage density - low weight and compact designAbsolutely maintenance-free and durablePre-charge function to protect the ESS system from overvoltage
The electronic core - the Victron Multiplus-II device combinationThe Multiplus-II is a high-end device combination from Victron Energy, consisting of a 48V battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This extends the PowerControl and PowerAssist functions to 50A and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid systems for the power supply.
5000W power with non-linear load - 4000W continuous load - 9000W peak powerfor 48V battery voltage50A transfer switch70A battery chargerOutput voltage: 230 VAC, frequency: 50 Hzmax. efficiency: 95%Protection class: IP22
System monitoring with the Victron Cerbo GX MK2 and GX Touch DisplayWith the Cerbo GX MK2 communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo GX MK2, you can control your system from anywhere. With the GX Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.
4-01-013720-001
Offgridtec backup kit Pylontech LiFePo4 battery - Victron MultiPlus II 48/3000 inverter 1-phase 4.8 kWh
Offgridtec backup kit 4.8kWh or 9.6kWh Pylontech LiFePo4 battery - Victron MultiPlus II 48/3000 inverter 1-phaseThe backup systems from Offgridtecare ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a matching MultiPlus-II inverter and a Cerbo GX MK2 for system monitoring from Victron Energy. This allows you to secure your energy supply even in the event of a power failure
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply to the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Application areas of the Offgridtec backup kit:Emergency power supplyOff-grid solar systems (stand-alone systems)Back-up of existing PV systemsGrid-connected power supplyUPS systems
Parts list:Pylontech US2000C 2.4kWh LiFePO4 battery (2x or 4x depending on selection)1x Victron MultiPlus-II 48/3000/35-32 230V device;combination1x Victron Lynx Distributor1x Victron Cerbo GX MK2 control panel1x Victron GX Touch 50 display panel für Cerbo GX1x 1,8m VE.Can to Can-Bus BMS type A cable1x 3m Victron RJ45 UTP cable1x 1m Offgridtec battery cable 50mm² M8-Ösen1x 125A 70V MEGA fuse1x Pylontech battery connection cable set
The Multiplus device combination is preconfigured to fit the Pylontech batteries.
Extended use of your backup system:meter 75A/phase and 5m Victron RJ45 UTP cable)With this energy meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for single-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.
In order for an ESS to be taken into account in the pre-configuration, the meter must be purchased in advance or for the system!
The storage solution - Pylontech US2000C batteriesThe US2000C battery is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage systems. Thanks to state-of-the-art technology, maximum safety and a long service life are guaranteed even with regular deep discharges.
Extremely cycle-proof - over 6000 cycles at 95% DoDAbsolutely intrinsically safe lithium technologyHigh charging and discharging performance possible;possibleIntegrated BMSVery high storage density - low weight and compact designAbsolutely maintenance-free and durablePre-charge function to protect the ESS system from overvoltage
The electronic core - the Victron Multiplus-II device combinationThe Multiplus-II is a high-end device combination from Victron Energy, consisting of a 48V battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This extends the PowerControl and PowerAssist functions to 50A and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid systems for the power supply.
3000W power with non-linear load - 24000W continuous load - 6000W peak powerfor 48V battery voltage32A transfer switch35A battery chargerOutput voltage: 230 VAC, frequency: 50 Hzmax. efficiency: 95%Protection class: IP22
System monitoring with the Victron Cerbo GX MK2 and GX Touch DisplayWith the Cerbo GX MK2 communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo GX MK2, you can control your system from anywhere. With the GX Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.
4-01-015800-001
Offgridtec 3-phase backup kit with Pylontech US2000C Victron MultiPlus II 48/3000 4.8 kWh battery
Offgridtec backup kit 3-phase 4.8 kWh or 9.6 kWh with Pylontech US2000C Victron MultiPlus II 48/3000 batteryThe backup systems from Offgridtecare ideal for emergency power supply or for expanding an existing solar system. In addition to lithium-ion batteries from Pylontech, the systems include a suitable MultiPlus-II inverter and a Cerbo GX MK2 for system monitoring from Victron Energy. This allows you to secure your energy supply even in the event of a power failure.
Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains failure and takes over the supply to the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.
Application areas of the Offgridtec backup kit:Emergency power supplyOff-grid solar systems (stand-alone systems)Back-up of existing PV systemsGrid-connected power supplyUPS systems
Parts list:Pylontech US2000C 2,4kWh LiFePO4 battery (depending on selection 2x or 4x) 3x Victron MultiPlus-II 48/3000/35-32 230V Geräcombination 2x Victron Lynx Distributor 1x Victron Cerbo GX MK2 control panel 1x Victron GX Touch 50 display panel für Cerbo GX 1x Victron MK3-USB Ve.Bus to USB Interface 1x 1,8m VE.Can to Can-Bus BMS type A cable 2x 0,9m Victron RJ45 UTP cable 1x 3m Victron RJ45 UTP cable 3x 1m Offgridtec battery cable 35mm² M8-Ösen 3x 125A 70V MEGA fusePylontech Battery connection cable set (depending on selection 1x or 2x)
Extended use of your backup system:In order to be able to set up an ESS (Energy Storage System) with the backup system, one energy meter with connection cable is required (Victron VM-3P75CT Energy Meter 3-phase power meter 75A/phase and one energy meter 75A/phase);meter 75A/phase and a5m Victron RJ45 UTP cable)With a power meter you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can also operate the 3-phase meter for single-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.
In order for an ESS to be taken into account in the pre-configuration, the meter must be purchased in advance or for the system!
The storage solution - Pylontech US2000C batteriesThe US2000C storage battery is a lithium battery of the latest generation. It has been specially designed to meet the high demands placed on backup storage systems. Thanks to state-of-the-art technology, maximum safety and a long service life are guaranteed even with regular deep discharges.
Extremely cycle-proof - over 6000 cycles at 95% DoDAbsolutely intrinsically safe lithium technologyHigh charging and discharging performance possibleIntegrated BMSVery high storage density - low weight and compact design