Cable and Customization Service
8-01-006280
Lapp oil flex © Solar XLS -R T 2x6 BK/RD - Lose
Oilflex © Solar XLS -R T BK/RD solar cable - essential product features:
1. Oilflex® Solar XLS-R T are halogen-free, double-insulated and networked twin lines for constant use outdoors. These lines are used for photovoltaic system construction to wire the individual solar modules with each other and for wiring with the inverter
2. Building data --- conductor: Fine-wound strands made of tinned Cu wires, in accordance with IEC 60228, class 5 --- vein isolation: temperature-resistant and halogen-free co-polyolefin, radiation-networked Pair colors: black/red --- outdoor coat: external and halfogen-free Co-polymer, radiation networked outer coat color: black
3. Special features for the networked compound are in addition to the extended temperature range, very good values regarding UV, ozone and weather resistance as well as abrasion resistance. They are used to wire solar modules with each other, as well as to connect the individual module series and the inverter.
The specified price applies per ongoing meter!
Electrical Properties
Nominal voltage U0/U according to VDE: AC 600/1000 V/DC 900/1500 V
Highly permissible DC voltage: 1.8 KV DC (head/conductor, non -grounded system)
Test voltage AC 6.5 kV voltage strength tests according to EN 50395
Thermal properties
Temperature range fixed: -40 ° C to +100 ° C max.
Short -circuit temperature +200 ° C
Flexible laying temperature: max. -25 ° C
Themic lifespan in accordance with EN 60216-2
Heat pressure resistance in accordance with EN 60811-3-1
Wet heat test according to EN 60068-2-78 with 85% humidity
Mechanical properties
Minimum bending radius occasionally moved: 15 x cable diameter
Set: 5 x cable diameter
Dynamic penetration: according to the requirement profile AK 411.2.3 Appendix F
Further tearing resistance: according to the requirement profile AK 411.2.3 Appendix G
Examination of the isolation and mantle break resistance as well as stretching: in accordance with EN 60811
Chemical properties
Ozone resistance: in accordance with EN 50396 Part 8.1.3 Procedure B
Weather / UV resistance according to HD 605 / A1
Fire behavior flamed according to IEC 60332-1-2
Halogen freedom according to IEC 60754-1
Acid and lye resistance in accordance with EN 60811-2-1 (oxalic acid and sodium hydroxide solution)
EC guidelines
The lines are compliant to the EC guidelines 2006/95/EC (Lower Voltage Directive) and 2002/95/EG and 2011/65/EG (Rohs, restriction of the use of certain dangerous substances).
Laying in the ground
Solar lines can generally be laid in the ground in the ground for laying the earth if it is ensured that there is no permanent contact with water and waterlogging is removed safely. The laying of the lines and correct execution of the cable ditch must correspond to VDE 0100 part 520 or comparable standards.
data sheet
Generally
item number
8-01-006280
Manufacturer part number
0023986
Product
Solar cable
Manufacturer
Lapp cable
Characteristics
Fire behavior (flamed according to IEC 60332-1-2)
material
copper
Area of operating environmental temperature
Stated: -40 ° C to +100 ° C max.
Leadership
Class 5 / IEC 60228 Cl.5
Copper content
115.2kg/km
Ladder cross -section (mm²)
6 mm²
Test voltage
AC 6500 V
Wire colors
Black red
Number of veins
2
classification
EIM 5.0 Class description: Flexible line, EIM 5.0 Class ID: EC001578
Dimensions (LXBXH)
(WXH) 11.9 x 5.8 mm
Weight
174kg/km
EAN
0797337909983
8-01-006295
Lapp ÖLFLEX© H1Z2Z2-K 1X6 WH/BK loose as running meters
ÖLFLEX® SOLAR XLR-R cables are weather, abrasion and UV-resistant photovoltaic cables. These halogen-free, double-insulated and cross-linked solar cables are suitable for permanent outdoor use to connect grounded and ungrounded photovoltaic systems. They are used both for wiring solar modules to one another and for connecting the individual rows of modules and the inverter. The cable has been tested by TÜV Rheinland according to 2 PfG 1169/08.2007 (PV1-F) type.
Important product features:
Cable cross section: 6mm
Manufacturer: Lapp Kabel
Outer insulation color: black
Insulation color: white
XLR-R solar cables from Lapp can basically be laid in protective pipes suitable for burial in the ground if it is ensured that there is no permanent contact with water and waterlogging is safely drained away. The laying of the cables in the ground and the correct design of the cable trench must comply with VDE 0100 Part 520 or comparable standards in order to prevent damage to the protective tube and permanent exposure of the cables and lines to penetrating water. Long-term, permanent storage and permanent operation of the lines in or under water is not permitted.
Construction of conductors
1. Conductor: Fine-wire strand made of tinned copper wires, according to IEC 60228, class 5
2. Wire insulation: electron beam cross-linked polyolefin co-polymer
3. Outer jacket Electron beam crosslinked polyolefin co-polymer outer jacket color: black or black with red or blue stripes
Electrical properties
Rated voltage: U0 /U according to IEC AC 600/1000 V DC 900/1500 V
Max. Permissible system voltage: 1.8 kV DC (conductor/conductor, non-earthed system) according to TÜV 2 PfG 1169/08.2007 Test voltage AC 6.5 kV
Thermal properties
Temperature range fixed: -40° C to +120° C max. conductor temperature (according to EN 60216- 2)
Temperature range according to: -40 °C to +90 °C ambient temperature TÜV 2 PfG 1169/08.2007
Flexible laying temperature: max. -25 °C
Heat pressure resistance according to EN 60811-3-1
Damp-heat test according to EN 60068-2-78 at 85% humidity
Mechanical properties
Minimum bending radius occasionally moved: 15 x cable diameter
fixed: 5 x cable diameter
Dynamic penetration according to DKE requirement profile PV1-F AK 411.2.3 Appendix F
Tear propagation resistance according to DKE requirement profile PV1-F AK 4112.3 Appendix G
Tear strength and elongation test according to EN 60811
Chemical properties
Weather / UV resistance according to HD 605/A1
Ozone resistance according to EN 50396
Halogen-free according to EN 50267
Fire behavior flame-retardant according to IEC 60332-1-2
Acid and alkali resistance according to EN 60811-2-1 (oxalic acid and caustic soda)
Price refers to 1 running meter.
Delivery time: 1-3 working days
.
8-04-006830
Lapp H07RN-F High-End Rubber Cable Single Core 16mm
H07RN-F 1xcore (heavy standard design, corresponds to HAR) is a heavy rubber connection and control cable with a wide range of possible areas of application. Our H07RN-F from Lapp is ideal for use outdoors or in damp rooms and is often used by industry and agriculture.
important product properties at a glance
heavy standard version flame-retardant according to IEC 60332-1-2 Oil resistant according to EN 60811-404 cold resistant UV-resistant Example applications:
Construction site extension cable Extension cord for outdoors Applications with medium, mechanical stress (industrial, agricultural use) Handsets and power supplies according to HD 516/ VDE 0298-300 Dry and damp rooms as well as outdoors (taking into account all normative cable properties) according to HD 516/ VDE 0298-300 To use
for mechanically more demanding applications in the commercial and private sector max. 1000 V AC protected + fixed Arrangements of single-core rubber hose lines H07RN-F can be used for short-circuit and earth-fault-proof laying according to IEC 60364-5-52/ HD 60364-5-52/ VDE 0100 Part 520 Construction
Bare copper strands according to HAR standard Core insulation: rubber compound type EI 4 Outer sheath: rubber compound type EM 2 Standard references / approvals
H07RN-F type certification according to EN 50525-2-21 product properties Flame-retardant according to IEC 60332-1-2 Oil-resistant according to EN 60811-404 Lappkabel is one of the world's leading manufacturers of cables for a wide variety of areas. The company from Germany produces its high-tech cables in several plants in Germany under the strictest quality controls.
Variants from €0.94*
8-01-010705
H07RN-F 2x6mm² solar cable rubber line 2-cad
Info: This article is for sale here as a meter goods. For example, 4 items would make a 4m length cable.
The management is constructed for worldwide use and a wide variety of climate areas. For electricity generation with wind. Whether used for the connection of the individual solar cells with each other or for the cabling with the inverter. The cable is also ideal for laying in motorhomes and boats, as it is very flexible despite its two veins and can be placed over any corner.
Other special features of this line are that they achieve excellent values regarding the weather and UV resistance. The extended temperature range enables the use even in the most extreme climatic environment, counteracts thermal aging and thus guarantees the function of the PV system for many years in every season. And the networked insulation material prevents the insulation from flowing away in the event of a short -circuit case. Advantages of this line:
resistant to ozone and weather influences
Burning behavior according to VDE 0482-332-1-2, DIN EN 60332-1-2/IEC 60332-1 (corresponds to DIN VDE 0472 part 804 test type B)
Ozone resistance of the insulating covers according to DIN VDE 0472 Part 805, Testart A or Part 805 A1, testart C
Oil resistance, test according to EN 60811-2-1
Building data:
Cu-Litze Blank, fine-wound according to DIN VDE 0295 Kl. 5, BS 6360 Cl. 5, IEC 60228 or HD 383
Rubber-arteric insulation E4 according to DIN VDE 0282 Part 1
Insulating wall thickness according to DIN VDE 0282 Part 4
Certer marking according to DIN VDE 0293-308 or HD 186
Widers blue, brown
Rubber outer coat EM 2 according to DIN VDE 0282 Part 1
Mantel wall thickness according to DIN VDE 0282 Part 4
8-01-006300
Lapp oil flex © Solar XLR-R 1x4 Wh/BK
Oilflex® Solar XLR-R lines are weather, abrasion and UV-resistant photovoltaic lines. These halogen -free, double isolated and networked solar lines are suitable for constant use outdoors for the connection of grounded and undeveloped photovoltaic systems. They are used to wire solar modules with each other, as well as to connect the individual module series and the inverter. The management has been checked by TÜV Rheinland according to 2 PfG 1169/08.2007 (PV1-F) type.
Important product properties:
Line cross -section: 1x4mmManufacturer: Lapp cable Color outdoor insulation: blackColor interior insulation: white
XLR-R solar lines from LAPP can generally be laid in the ground in the ground in the ground laying, if it is ensured that there is no permanent contact with water and waterlogging is removed safely. The laying of the lines in the ground and the correct execution of the cable ditch must correspond to VDE 0100 part 520 or comparable standards in order to prevent damage to the protective tube and the permanent suspension of the cable and lines with penetrating water. Long -term, permanent storage and permanent operation of the lines in or under water is not permitted.
Leadership
1. Head: Fine-wound strands made of tinned Cu wires, according to IEC 60228, class 52. Ader insulation: Electron beam network polyolefin co-polymer3. Outside mantle Electron beam network polyolefin co-polymervour mantle: black or black with red or blue stripes
Electrical Properties
Nominal voltage: U0/U according to IEC AC 600/1000 V DC 900/1500 VMax. Permissible system voltage: 1.8 KV DC (head/conductor, non -grounded system) in accordance with TÜV 2 PfG 1169/08.2007 Pru? F voltage AC 6.5 kV
Thermal properties
Temperature range determined: -40 ° C to +120 ° C max. Max. Ladder temperature (in accordance with EN 60216-2)Temperature range stipulated: -40 ° C to +90 ° C ambient temperature TÜV 2 Pfg 1169/08.2007Flexible laying temperature: max. -25 ° CHeat pressure resistance in accordance with EN 60811-3-1Moisten-heating pru? Fung in accordance with EN 60068-2-78 with 85% humidity
Mechanical properties
Minimum bending radius occasionally moved: 15 x cable diameterSet: 5 x cable diameterDynamic penetration according to the DKE requirement profile PV1-F AK 411.2.3 Appendix FFurther tearing resistance according to the DKE requirement profile PV1-F AK 411.2.3 Appendix GPru?
Chemical properties
Weather / UV resistance according to HD 605 / A1Ozone resistance in accordance with EN 50396Halogen freedom in accordance with EN 50267Fire behavior flamed according to IEC 60332-1-2Acid and lye resistance in accordance with EN 60811-2-1 (oxalic acid and sodium hydroxide solution)
Delivery time: 5-6 working days
data sheet
Generally
item number
8-01-006300
Manufacturer
Lapp cable
EAN
4044777179121
8-04-001100
Offgridtec® 1M battery cable 35mm² M8 eyelets on both sides
Robust and versatile battery connection cableThe cable is suitable for connecting a battery with M8 round poles to a device that also has an M8 screw terminal. These include the following device classes:
Victron Energy Phoenix inverterVictron Energy inverter / charger station wagonAll other devices such as charge controllers, inverters or battery chargers, which have an M8 shaft terminal and are to be connected to a battery with the same terminalCharacteristicsLength: 1mConnections: M8 -> M8Line cross -section: 35mm²Certer color: red / blackSuitable for laying in dry and damp rooms, as well as vehiclesSuitable for applications with medium mechanical stressOil, cold and UV-resistant, flamedNote and accessories recommendationTo choose the correct connection cable, always note instructions in the instructions to be connected to the device to be connected. The cable cross -section must be selected so that the power loss is max. 2%. In our online shop you will find other accessories such as mega security holders and mega protection.
Scope of delivery:
Battery connection cable 35mm² - 2 single wires red / black 1m
016005
Offgridtec Solar Cable 2x4mm² PV1-F 4mm² Two-core Solar Cable Black
Das Offgridtec Solarkabel 2x4mm² ist eine strahlenvernetzte High-End Solarleitung. Mit optimierten Leitungsdesign ist das Solarkabel schlank, leicht und robust und spart jede Menge Zeit bei der Installation.
Die Zwillingsleitung kann bei Bedarf leicht in zwei Leitungen getrennt werden. Dafür benötigen Sie keinerlei besonderes Werkzeug. Trotzdem ist die Verbindung der beiden Adern extrem stabil wenn Sie die Leitung lieber zusammen lassen möchten.
Bei diesem Artikel handelt es sich um Meterware. Jeder Artikel entspricht einem Meter. Wenn Sie z.B. 10x diesen Artikel kaufen, erhalten Sie ein zusammenhängendes Stück mit 10m Länge.
Nutzen
Einfach in zwei Einzelleitungen trennbar
Robust gegen mechanische Einwirkung
Reduktion der Brandausweitung sowie der toxischen Rauchgasbildung im Brandfall
Aufbau
Feindrähtiger, verzinnter Kupferleiter
Aderisolation aus strahlenvernetztem Copolymer
Außenmantel aus strahlenvernetztem Copolymer
Außenmantelfarbe: Schwarz (Adern parallel mit Trennsteg verbunden)
Lieferumfang:
1x 1m Solarkabel 2x4mm² (Meterware)
8-01-010670
Offgridtec® 1M battery cable 35mm² M10 eyelets on both sides
Robust and versatile battery connection cableThe cable is suitable for connecting a battery with M10 round poles to a device that also has an M10 screw terminal. These include the following device classes:
Victron Energy Phoenix inverterVictron Energy inverter / charger station wagonAll other devices such as charge controllers, inverters or battery chargers, which have an M8 shaft terminal and are to be connected to a battery with the same terminalCharacteristicsLength: 1mConnections: M10 -> M10Line cross -section: 35mm²Certer color: red / blackSuitable for laying in dry and damp rooms, as well as vehiclesSuitable for applications with medium mechanical stressOil, cold and UV-resistant, flamedNote and accessories recommendationTo choose the correct connection cable, always note instructions in the instructions to be connected to the device to be connected. The cable cross -section must be selected so that the power loss is max. 2%. In our online shop you will find other accessories such as mega security holders and mega protection.
Scope of delivery:
Battery connection cable 35mm² - 2 single wires red / black 1m
190840
BETAtherm - or equivalent 145 (SO 07K-K) cable, finely stranded, tinned.
High-quality tinned single-core cable, available by the meter**BETAtherm® 145 (SO 07Z-K) or equivalent, such as LAPP or Leoni.**
- **Conductor:** Tinned copper stranded wire, finely stranded according to VDE 0295/IEC 60228, Class 5 - **Insulation:** Polyolefin copolymer, electron-beam crosslinked, HF90 - **Nominal voltage:** - U₀/U ≤ 1 mm²: 300 V / 500 V - U₀/U ≥ 1.5 mm²: 450 V / 750 V - Fixed and protected installation: U₀/U ≥ 1.5 mm²: 600 V / 1000 V - **Operating temperature at the conductor:** - Fixed installation: -55°C to +145°C - Occasionally moved: -35°C to +120°C - **Halogen-free:** Compliant with IEC 60754-1, EN 50267-2-1 - **Flame retardant:** Compliant with EN/IEC 60332-1-2
**Certifications:** - VDE registration number: 9887 - DNV/GL - Lloyd’s Register (LR) - BUREAU VERITAS (BV) - ÖVE
Variants from €0.85*
8-01-010675
Offgridtec® 2M battery cable 35mm² M10 eyelets on both sides
Robust and versatile battery connection cableThe cable is suitable for connecting a battery with M10 round poles to a device that also has an M10 screw terminal. These include the following device classes:
Victron Energy Phoenix inverterVictron Energy inverter / charger station wagonAll other devices such as charge controllers, inverters or battery chargers, which have an M8 shaft terminal and are to be connected to a battery with the same terminalCharacteristicsLength: 2mConnections: M10 -> M10Line cross -section: 35mm²Certer color: red / blackSuitable for laying in dry and damp rooms, as well as vehiclesSuitable for applications with medium mechanical stressOil, cold and UV-resistant, flamedNote and accessories recommendationTo choose the correct connection cable, always note instructions in the instructions to be connected to the device to be connected. The cable cross -section must be selected so that the power loss is max. 2%. In our online shop you will find other accessories such as mega security holders and mega protection.
Scope of delivery:
Battery connection cable 35mm² - 2 single wires red / black 2m
700502530
Philippi HO7BQ-F 3x2.5 mm2
Verzinnte mehradrige flexible Anschluss- und Steuerleitung für die AC 230V
Installation. Wird eingesetzt in trockenen, feuchten und nassen Räumen, und im Freien, witterungsbeständig. Außenmantel aus EPR/PUR - gelb, Öl- und Säurebeständig.
Temperaturbereich: –40...+80°C , flammwidrigNennspannung: 450 V