Solar System with Battery Storage

Extremely versatile complete package The brand new offgridtec® Hompremium series is a real all-rounder at an unbeatable price-performance ratio. In addition to the use as a UPS backup solution with the selection between network and battery priority, this PV system can be used as well as a self-consumption system. There are hardly any limits to the performance of this solar system- depending on personal needs and on request, extensions, both module and battery side are possible. If a higher output power is required on the inverter, further same devices can also be added to increase performance. In addition to the power electronics, the memory and the solar modules, all components required for the connection are also included, with the exception of the solar module holders, which must be ordered separately. All other components are plug & play - this does not mean annoying plug mounting or the like - connecting and ready. Partial list - that's inside 10xLuxen Solar 410W Full Black Solarmodule Luxpower Series 5 Victron Energy Multiplus-II 48/5000 inverter MPN PMP482505010 Victron Energy Smartsolar Mppt 250/70-TR loader Victron Energy Lynx Distributor for DC distribution and protection 2x 3.5 kWh Pylontech US3000C LIFEPO4 memory batteries Inverter connection cable For the connection of the Pylontech battery to the Multiplus 48/5000 (2m) Ve.can to CAN-BUS BMS type A cable 1.8m For the connection of the Cerbo GX to the memory 3M VICTRON RJ45 UTP cable to connect the Multiplus to the Cerbo GX Cerbo GX + GX Touch 50 - The communication center of your system 1M battery cable 25mm² M8 terminal to screw terminal connection For the connection of the charge controller to the battery 1m battery cable 50mm² M8 eyelet on both sides To combine multiplus and lynx distributor 10m offgridtec® professional connection cable 6mm² solar module to charge controller For the connection between solar modules and charge controllers Solar connector connector branches (couple) - for the parallel interconnection of two strings 2x 5m 6mm² solar connector connecting cable connector/ socket extension To connect the two module strings to the solar plugs Victron 3M Ve.direct Cable Connection cable To connect the charge controller to the Cerbo GX Victron 200a 58V/48V MEGA-FUSE Fuse for multiplusOffgridtec 80a 48V mega-fuse fuse For solar loader Luxen Solar 410W full black solar module - efficiency of 21%The Luxpower 410W Full Black Solar module 5 of Luxen Solar is a monocrystalline and modern module with a gallium-doped technology and 108 half-cell layout. Thanks to the multi-busbar technology, three integrated BY pass diodes and the two-part arrangement of the cell strands, this solar panel in solo operation offers a high hot spot resistance and in strings with many modules a solid power yield, even in poor light and partial shading. The noble full-black design makes it a good choice when it comes to finding a solar cell for roof systems on residential buildings or for balcony power plants and many other areas of application.Characteristics Gallium-doped technology Reduced hot spot temperature Multi-busbar technology 3 bypass diodes PID resistance (excellent anti-pid performance guarantee thanks to optimized mass production processes and material control) Improved performance in low light Improved mechanical resistance to external influences High efficiency of 21 % Manufacturer product guarantee: 25 years Gallium-doped technology The gallium doping is a method for preventing the light induced degradation (lid). The wounding of this technology definitely leads to a better performance of solar cells and PV modules as well as to improve your long-term performance and reliability. Gallium-doped technologyThe gallium doping is a method for preventing the light induced degradation (lid). The wounding of this technology definitely leads to a better performance of solar cells and PV modules as well as to improve your long-term performance and reliability.Reduced hot spot temperatureAnother advantage of half-cut production by halving the electrical current of both the cells and the cell strands can be reduced by the hot spot temperature by 50 %, which increases the reliability of the PV module.25% reduced, thermal loss of performanceSince the halved cells only have half the work current, the thermal loss of performance of the PV module can be significantly reduced by 25% during operation and the operating temperature of the PV module is also lower, which improves the reliability of the PV module, and the overall performance elevated.Multi-busbar technologyBusbars are located on every PV module. These are power rails that are firmly printed on each solar cell. They absorb the generated direct current and lead it to the collective rails. By using more busbars, Luxen Solar reduces shading, shortens the transport paths and reduces the resistance in the modules.Technical specifications Performance (pmax): 410 WP Tension (VMP): 31.83 V Max. Electricity (IMP): 12.88 a Idle voltage (VOC): 37.98 V Short circuit current (ISC): 13.77 a Module efficiency: 21 % Operating temperature: -40 ° C - +85 ° C Max. System voltage: 1500 VDC (IEC) Cell type: Half -Cut - Monocrystalline Number of cells: 108 (6x18) Weight: 21 kg Dimensions: 1722 x 1134 x 35 mm Protection type connection box: IP68 Module color: black LIFEPO4 storage technology from Pylontech - proven, reliable, safe The Pylontech storage battery used is a lithium iron phosphate battery of the latest generation. A highest possible lifespan with maximum security is guaranteed with this modular system. In each module there is a battery management system (BMS) which offers comprehensive protection against deep discharge and overload, as well as damage due to too high streams or too high or too low temperature. A defect in the battery is also excluded due to a short circuit or reversal. Properties of the Pylontech US3000C memory modules Extremely cycle -proof - over 6000 cycles at 95% dod (discharge per cycle) Absolutely self -proof by integrated protective shutdown (BMS) High loading and discharge power of up to 5kW per module High memory density Low weight and compact design Absolutely maintenance -free and easy to install Pylontech grants a 10 -year guarantee on the US3000C The heart of the system-the Victron Multiplus-II 48/5000 The Multiplus-II 48/5000/70-50 GX is a high-end device combination of Victron Energy (MPN PMP482506000) connects the classic multiplus components with an external current sensor and integrated anti-Icelanding function. As a result, the functions PowerControl and Power Assist are expanded to 50 A and the potential area of ​​application extends to eating applications. The inverter module provides a whopping 5000 W or 4000 W with a linear permanent burden on non -linear loads. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, with which it can be switched back and forth between the AC connections. Compared to the remaining devices of the series, the GX variants have an integrated GX display with numerous other connection options. Performance features and properties of the Multiplus-II 48/5000 Integrated GX control device with various communication connections PowerControl and Power Assist increase in network or generator performance Built-in anti-Icelanding function and connection option for external electricity sensor (optional) Can be used as a backup device in network -coupled systems for the power supply for network failures Can be used in various ESS (Energy Storage System) applications Ideally suited for professional seafaring, yachts, vehicles and land -bound, native applications Ve.Bus interface for parallel and three-phase operation, remote monitoring and system integration Practically unlimited performance through parallel and three-phase operation Can be configured on site or from a distance using Veconfigure software* technical features 5000W power with non -linear load 4000 W continuous load and 9000 W Top performance For 48 V battery voltage, 50 A transfer switch and 70 A battery charger Output voltage: 230 VAC, frequency: 50 Hz Max. Effect is 95%, protection class IP22 Delivery is configured and tailored to the included components The setting options on the Multiplus-II are extremely diverse, as are its possible uses. So that the system, as it is delivered, the name "Plug and Play" does justice, we have already made the most necessary settings for you - the system is therefore immediately operational without further configuration. Maximum flexibility thanks to two alternating current outputs The main exit ensures uninterrupted operation. In the event of a network failure or in the event of an interruption of the land/generator current, the multiplus-II takes over the supply of the connected consumers. Switching happens so quickly (in less than 20 milliseconds) that an interruption -free operation of computers and other electronic devices is guara