Balcony Power Plants

The Offgridtec balcony power plant 1700W with 1x Hymiles HM-1500, 4x Trina Vertex S 425W Solar modules Monocrystalline in Black Frame Design, is a complete mini-PV solar system compiled by offgridtec.The Mini-PV-Balcon power plant is A practical solution to generate part of the required electricity for the household itself and thereby significantly reduce the cost of total current consumption. The system comprises four solar modules, a suitable micro inverter and an AC connection cable that connects the inverter with a socket. The modules are designed so that they can be installed directly next to each other. Functionality:The offgridtec balcony power plant is a space -saving solar system, which consists of a solar module and a suitable hymile microwicer to feed the electricity generated into the in -house power grid. The inverter is ideally attached directly to the substructure of the solar module and connected to the solar connector on the module. The AC cable is connected via the battery connection of the inverter and directed directly to the appropriate socket. No special setting is required to use the solar power generated in the house's power grid. If there is electricity from other sources in the house, it is preferred and supplemented by mains current if necessary. The complete system contains:4x Trina Solar Vertex S TSM-DE09.08 425W Solar module Monocrystalline (Black Frame)1x Hoymiles HM-1500 inverter1x 5m connection cable Betteri BC01 socket for Schukosteck can1x Betteri end cap for BC01 socket IP67 FemaleTrina Solar Vertex S 425W solar module:The Trina Solar Vertex S is a 425W solar module with monocrystalline cells and high-density cell connection technology. Multi-busbar technology ensures more absorption, low series resistance, improved electricity dissipation and increased reliability.The Trina Solar Vertex S is certified for use in wind and snow loads of 4000 - 6000 PA (test loads). The highly transparent and heat-prone glass has a thickness of 3.2mm and has an anti-reflection coating. The frame has a 30mm anodized aluminum alloy. Characteristics:Multi-busbar technologyHigh efficiency of 21.3%Manufacturer product guarantee: 15 yearsImproved energy generationIncluding connection cableExcellent low lighting behavior (IAM)Easy handlingFlexible installation solutions for system useMulti-busbar technology:Busbars are located on every PV module. These are power rails that are firmly printed on each solar cell. They absorb the generated direct current and lead it to the collective rails. By using more busbars, Trina Solar reduces shading, shortens the transport paths and reduces the resistance in the modules. Technical specificationsPerformance (pmax): 425 WTension (VMP): 41.5 VMax. Electricity (IMP): 10.24 aIdle voltage VOC): 49.9 VShort circuit current (ISC): 10.74 aOperating temperature: -40 ° C - +85 ° CMax. System voltage: 1500V DCCell efficiency: 21.3%Number of cells: 144Dimensions: 1762 x 1134 x 30 mmWeight: 21.8 kgProtection class: IP68Hoymiles HM-1500 module inverter:The HM-1500 from Hoymiles is the perfect microwicator for your balcony power plant. The compact lightweight (only 3.75kg including the 2.06m AC cable) is suitable for solar power production with up to four solar panels up to an output of 470W each. Just like all other Hymiles microw replacement, it is suitable for long operating hours and a wide PV module application, since its commissioning is very low (only 22V) and the DC input area of ​​the operating voltage (16-60V) is extremely wide. Recommended module performance: up to 470WMax. Input voltage: 60VMax. Input current: 4*11.5ANominal output performance: 1500VAOperating voltage area: 16 ~ 60VDimensions (BXHXT): 280 x 176 x 33mmWeight. 3.75kgSplit connection:The balcony power plant contains a 5m long AC extension cable with Betteri BC01 connector, matching the HM-1500 inverter, at one end and a angled Schuko connector at the other end of the cable. This enables the quick and uncomplicated connection to the Schukosteck cans (connector type F), which is common in Germany. Balcon power plants in GermanyThere is currently no law or regulation in Germany in which the production of solar power is regulated for pure own use. The limit value of a maximum of 600W AC PV power is a reserve value that can be fed into an existing socket dose of a house according to the current VDE standard without overloading it. Nothing is described for independent circuits without additional loads. Each electrical installation should be carried out by VDE. However, the operation of a balcony power plant via the usual Schuko socket is generally not prohibited. The report to the Federal Network Agency is mandatory. However, no cases of order money are known for non -reporting balcony power plants, as well as insurmountable problems with network operators. The system operator is responsible for compliance and implementation of norms and obligations. There are already many professional and legal information on relevant websites.

The Offgridtec balcony power plant 850W with 1x Hymiles HM-600, 2x Trina Solar Vertex S 425W Solar modules Monocrystalline (Black Frame) is a complete mini-PV solar system compiled by offgridtec.The Balcon power plant package is A practical solution to generate part of the required electricity for the household itself and thereby significantly reduce the cost of total current consumption. The system comprises two solar modules, a suitable micro inverter and an AC connection cable that connects the inverter with a socket. The modules are designed so that they can be installed directly next to each other. Function:The offgridtec balcony power plant is a space -saving solar system, which consists of 2 solar modules and a suitable hymile microwicer to feed the generated electricity into the in -house power grid. The inverter is ideally attached directly to the substructure of the solar module and connected to the solar connector on the module. The AC cable is connected via the battery connection of the inverter and directed directly to the appropriate socket. You can choose between a conventional Schuko socket and a Wieland feed-in box that is included in the scope of delivery. No special setting is required to use the solar power generated in the house's power grid. If there is electricity from other sources in the house, it is preferred and supplemented by mains current if necessary. The full system balcony power plant contains:2x Trina Solar Vertex S TSM-DE09.08 425W Solar module Monocrystalline (Black Frame)1x Hoymiles HM-600 Microinverter1x 5m connection cable Betteri BC01 socket for Schukosteck can1x Betteri end cap for BC01 socket IP67 FemaleTrina Solar Vertex S 425W solar moduleThe Trina Solar Vertex S is a 425W solar module with monocrystalline cells and high-density cell connection technology. The improved 425W solar module can generate more energy more cheaply. Its multi-busbar technology ensures more absorption, low series resistance, improved electricity dissipation and increased reliability.The Trina Solar Vertex S is certified for use in wind and snow loads of 4000 - 6000 PA (test loads). The highly transparent and heat-prone glass has a thickness of 3.2mm and has an anti-reflection coating. The frame has a 30mm anodized aluminum alloy. CharacteristicsMulti-busbar technologyHigh efficiency of 21.3%Manufacturer product guarantee: 15 yearsImproved energy generationIncluding connection cableExcellent low lighting behavior (IAM)Easy handlingFlexible installation solutions for system useMulti-busbar technologyBusbars are located on every PV module. These are power rails that are firmly printed on each solar cell. They absorb the generated direct current and lead it to the collective rails. By using more busbars, Trina Solar reduces shading, shortens the transport paths and reduces the resistance in the modules. Technical specifications:Performance (pmax): 425 WTension (VMP): 41.5 VMax. Electricity (IMP): 10.24 aIdle voltage VOC): 49.9 VShort circuit current (ISC): 10.74 aOperating temperature: -40 ° C - +85 ° CMax. System voltage: 1500V DCCell efficiency: 21.3%Number of cells: 144Dimensions: 1762 x 1134 x 30 mmWeight: 21.8 kgProtection class: IP68Hoymiles HM-600 module inverterThe HM-600 from Hoymiles is the perfect microwicator for your balcony power plant and is suitable for solar power production with a solar panel up to an output of 500 watt peak. Just like all other Hymiles microw replacement, it is suitable for long operating hours and a wide PV module application, since its commissioning is very low (only 22V) and the DC input area of ​​the operating voltage (16-60V) is extremely wide. The Hymiles microving interchangeable converts the solar power obtained from its photovoltaic system, AC-Netz-compliant and feeds it directly into the supply network. The unique configuration means that each PV module is controlled by an individual maximum Peak Power Point Tracker (MPPT). This ensures that regardless of the performance of the other PV modules in the system, the maximum available service is fed into the supply network by each individual module. If individual PV modules of the system are impaired by shading, dirty, alignment or false adjustments, the HM-600 still guarantees a peak for its associated PV module. The result is the maximum possible energy production of your PV system. Technical specifications:Recommended module performance: up to 380WMax. Input voltage: 60VMax. Input current: 2*11.5ANominal output performance: 600VAOperating voltage area: 16 ~ 60VDimensions (WXHXT): 250 x 170 x 28 mmWeight. 3kgSocket connectionThe balcony power plant contains a 5m long AC extension cable with Betteri BC01 connector, matching the HM-600 inverter, at one end and a angled Schuko plug at the other end of the cable. This enables the quick and uncomplicated connection to the Schukosteck cans (connector type F), which is common in Germany. Balcon power plants in GermanyThere is currently no law or regulation in Germany in which the production of solar power is regulated for pure own use. The limit value of a maximum of 600W AC PV power is a reserve value that can be fed into an existing socket dose of a house according to the current VDE standard without overloading it. Nothing is described for independent circuits without additional loads. Each electrical installation should be carried out by VDE. However, the operation of a balcony power plant via the usual Schuko socket is generally not prohibited. The report to the Federal Network Agency is mandatory. However, no cases of order money are known for non -reporting balcony power plants, as well as insurmountable problems with network operators. The system operator is responsible for compliance and implementation of norms and obligations. There are already many professional and legal information on relevant websites.

TheOffgridtec Solar Direct Balcon power plant With a hymiles400W inverter andTwo offgridtec 200W Mono 40V solar modules, is an ideal way to produce part of your required budget current yourself and to significantly reduce your total editions for electricity and make a significant contribution to the environment. This system contains everything that is required for connection to the in -house power grid and, if necessary, for assembly on the balcony railing or roof. Functionality:The offgridtec balcony power plant is a compact system. It consists of 2 solar modules and the right Hoymile microwicer to feed into the in -house power grid. The inverter is ideally attached directly to the substructure of the solar module and connected to the solar module with the solar connector. The AC cable is connected via the Betteri connection of the inverter and led directly to the appropriate socket. Here is the choice between the connection to the usual Schuko socket or a Wieland feed-in box, which is included when selecting the scope of delivery.In order to use the generated solar power in the house electricity network, no further setting is required. The complete system contains:- 2x offgridtec 200W Mono 40V solar module- 1x Hoymiles HM-400 microinverter- 1x connection cable Betteri BC01 socket for Schukosteck can (length 10m)or 1x connection cable Betterie B01 socket for Wieland RST20I3S connection (length 10m)- 1x Betteri end cap for BC01 sockets female- On request, the assembly package for the balcony railing or flat roof or beaver tail roof or brick roof or corrugated roof and tin roof. The relevant sets contain suitable 1.25m long profile rails for the balcony power plantOffgridtec 200W Mono 40V solar panel - efficiency of over 22%The SolarModule 200W Mono from Offgridtec works with monocrystalline solar cells with a high efficiency of 22.3% and, thanks to their 40V operating voltage, is ideal for 24V systems. In offgridtec mono solar modules, only cells of the highest quality degree are installed and, thanks to the latest production, guarantee a consistently high quality and performance with maximum lifespan. Technical specifications:Performance (pmax): 200WTension (VMP): 40VMax. Electricity (IMP): 5.5AIdle voltage (VOC): 46.6VShort circuit current (ISC): 5.45aMax. System voltage: 1000V/DCModule efficiency: 22.3%Weight: 11kgDimensions: 1500 x 680 x 35 mmHoymiles HM-400 Microinverter module inverter TheHM-400 from Hoymiles Is the perfect microworist for your balcony power plant and is suitable for solar power production with a solar panel up to an output of 500 watt peak. Just like all other Hymiles microw replacement, it is suitable for long operating hours and a wide PV module application, since its commissioning is very low (only 22V) and the DC input area of ​​the operating voltage (16-60V) is extremely wide. The Hymiles microving interchangeable converts the solar power obtained from its photovoltaic system, AC-Netz-compliant and feeds it directly into the supply network. Each Hoymiles microv signator is connected individually to a PV module of your system. This unique configuration means that each PV module is controlled by an individual maximum Peak Power Point Tracker (MPPT). This ensures that regardless of the performance of the other PV modules in the system, the maximum available service is fed into the supply network by each individual module. If individual PV modules of the system are impaired by shading, dirty, alignment or false adjustments, the HM-400 still guarantees a peak for its associated PV module. The result is the maximum possible energy production of your PV system. Recommended module performance: up to 500WMaximum input voltage: 60VMaximum input current: 12.5aNominal output performance: 400VABattery voltage range: 16 ~ 60VDimensions (BXHXT): 182 x 164 x 29 mmWeight: 1.98kg (including 1.35m AC cable)Optional monitoring of your system is only possible with a data transmission unit (DTU). Here you have the choice between the DTU Lite and the DTU Pro. Connection setWith the connection cable, you have the option between the connection for a normal Schuko socket or a Wieland feed-in box. When choosing the Schuko socket, the complete system contains an AC extension cable with Betteri BC01 plug, matching the HM-400 inverter at one end and a angled Schuko plug at the other end of the cable. When choosing the Wieland variant, the AC cable at the end of the cable has an angled Wieland RST20I3S connector for installation according to the current technical regulations (e.g. VDE standard AR-N-4105). The right feed-in socket is then included. With the Wieland connector, the pins are not completely exposed, as with the Schuko connector, which minimizes the risk of a arc between the pin and socket and thus overheating and fire risk.Fastening systemsAssembly sets for- Balcony railing: with suitable C-hooks- Flat roof: inclination angle 10 ° - 60 °- Beaver tail roof: With beaver tail roof hook- Tiegeldach: With 3-way adjustable roof hooks- Wellethernit and sheet metal roof: with stainless steel stock screwsBalcon power plants in GermanyThere is currently no law or regulation in Germany in which the production of solar power is regulated for pure own use. The limit value of a maximum of 600W AC PV power is a reserve value that can be fed into an existing socket dose of a house according to the current VDE standard without overloading it. Nothing is described for independent circuits without additional loads.Each electrical installation should be carried out by VDE. However, the operation of a balcony power plant via the usual Schuko socket is generally not prohibited. The report to the Federal Network Agency is mandatory. However, no cases of order money are known for non -reporting balcony power plants, as well as insurmountable problems with network operators. The system operator is responsible for compliance and implementation of norms and obligations. There are already many professional and legal information on relevant websites.

TheSolar direct balcony power plant complete systems from offgridtec are an ideal way to produce part of your required budget current yourself and thus make a contribution to climate protection. In addition to a solar module and a suitable micro inverter, the systems contain everything that is required for connection to the in-house power grid, and, if necessary, for assembly on the balcony railing or roof. Functionality:The offgridtec balcony power plant is a compact solar system. It consists of two 150W solar modules and the appropriate 350 Hymile Microwicer to feed into the in -house power grid. The inverter is ideally attached directly to the substructure of the solar module and connected to the solar module with the solar connector. The AC cable is connected via the Betteri connection of the inverter and plugged directly into the usual Schuko socket. In order to use the generated solar power in the house electricity network, no separate setting is required. If electricity is already available from local sources, the devices in the household first use it and then supplement with network current if necessary. The full system balcony power plant contains:- 2x offgridtec 150W Mono 20V solar module- 1x hymiles HM-350 microinverter- 1x connection cable Betteri BC01 socket for Schukosteck can (length 10m)- 1x Betteri end cap for BC01 sockets female- Bracket:Assembly package for balcony railings- flat roof- beaver tail roof- tiled roof- Welleternit- and tin roof The relevant sets contain suitable 1.25m long profile rails for the balcony power plantOffgridtec 150W Mono 20V solar panel - efficiency of over 22%The SolarModule 150W Mono from Offgridtec works with monocrystalline solar cells with a high efficiency of 22.3% and, thanks to their 20V operating voltage, is ideal for 12V systems. In offgridtec mono solar modules, only cells of the highest quality degree are installed and, thanks to the latest production, guarantee a consistently high quality and performance with maximum lifespan. Technical specifications:Performance (pmax): 150WTension (VMP): 20VMax. Electricity (IMP): 7.5AIdle voltage (VOC): 24VShort circuit current (ISC): 8.1aMax. System voltage: 1000V/DCModule efficiency: 22.3%Positive performance tolerance of 0 ~ 3%Weight: 12kgDimensions: 1140 x 680 x 35 mmHymiles HM-350:The HM-350 from Hoymiles is the perfect microwicator for your balcony power plant and is suitable for solar power production with a solar panel up to an output of 440 watt peak. Just like all other Hymiles microw replacement, it is suitable for long operating hours and a wide PV module application, since its commissioning is very low (only 22V) and the DC input area of ​​the operating voltage (16-60V) is extremely wide. The Hymiles microving interchangeable converts the solar power obtained from its photovoltaic system, AC-Netz-compliant and feeds it directly into the supply network. Each Hoymiles microv signator is connected individually to a PV module of your system. This unique configuration means that each PV module is controlled by an individual maximum Peak Power Point Tracker (MPPT). This ensures that regardless of the performance of the other PV modules in the system, the maximum available service is fed into the supply network by each individual module. If individual PV modules of the system are impaired by shading, dirty, alignment or false adjustments, the HM-350 still guarantees a peak for its associated PV module. The result is the maximum possible energy production of your PV system. Recommended module performance: up to 440WMaximum input voltage: 60VMaximum input current: 11.5aNominal output performance: 350VABattery voltage range: 16 ~ 60VDimensions (BXHXT): 182 x 164 x 29.5 mmWeight: 1.98kg (including 1.35m AC cable)Optional monitoring of your system is only possible with a data transmission unit (DTU). Here you have the choice between the DTU Lite and the DTU Pro. Connection set:The complete system contains an AC extension cable with Betteri BC01 connector, matching the HM-350 inverter, at one end and a angled Schuko plug at the other end of the cable. This enables the quick and uncomplicated connection to the Schukosteck cans (connector type F), which is common in Germany. Fastening systems:The offgridtec balcony power plant is available either with or without fastening sets. You can choose from assembly sets for:Balcony railing: with suitable C-hooksFlat roof: angle of inclination 10 ° - 60 °Biber tail roof: with beaver tail roof hookTiegeldach: With 3-fold adjustable roof hooksWellethernit and sheet metal roof: with stainless steel-stick screwsBalcon power plants in Germany:There is currently no law or regulation in Germany in which the production of solar power is regulated for pure own use. The limit value of a maximum of 600W AC PV power is a reserve value that can be fed into an existing socket dose of a house according to the current VDE standard without overloading it. Nothing is described for independent circuits without additional loads.Each electrical installation should be carried out by VDE. However, the operation of a balcony power plant via the usual Schuko socket is generally not prohibited. The report to the Federal Network Agency is mandatory. However, no cases of order money are known for non -reporting balcony power plants, as well as insurmountable problems with network operators. The system operator is responsible for compliance and implementation of norms and obligations. There are already many professional and legal information on relevant websites.

The Offgridtec balcony power plant with two 410W solar modules of the Luxpower Series 5 in a chic Full Black Design, with a Hoymiles HM-600 inverter, connection cable and assembly set is an ideal way to produce part of your required budget current yourself and significantly reduce your expenses for electricity. In addition, they contribute to climate protection. In addition to two solar modules and a suitable micro inverter, the systems contain everything that is required to connect to the in-house power grid. To do this, you can select the assembly set for a balcony railing or various roof structures. The set is designed for assembly of the modules side by side.Functionality:The offgridtec balcony power plant is a compact solar system. It consists of two solar modules and the right Hoymiles Microwa interpreters for feeding into the in -house power grid. The inverter is ideally attached directly to the substructure of the solar module and connected to the solar module with the solar connector. The AC cable is connected via the Betteri connection of the inverter and led directly to the appropriate socket. Here is the choice between the connection to the usual Schuko socket or a Wieland feed-in socket, which must be selected and is included in the scope of delivery.In order to use the generated solar power in the house electricity network, no separate setting is required. The household appliances first use the solar power and then supplement with network current if necessary. The full system balcony power plant contains:- 2x Luxen Solar 410W Full Black Solar module Luxpower Series 5- 1x Hoymiles HM-600 microinverter- 1x connection cable Betteri BC01 socket for Schukosteck can (length selectable 5m - 10m - 15m)Or to Wieland RST20I3S connection (length selectable 5m - 10m - 15m)- On request 1 assembly package, optionally:Balcony railing- flat roof- beaver tail roof- brick roof- Wellethernit or tin roof The relevant sets contain suitable 1.25m long profile rails for the balcony power plant.Luxen 410W Luxpower Series 5 (Full Black) - efficiency of 21%The Luxpower 410W Full Black Solar module 5 of Luxen Solar is a monocrystalline and modern module with a gallium-doped technology and 108 half-cell layout. Thanks to the multi-busbar technology, three integrated BY pass diodes, as well as the two-part arrangement of the cell strands, this solar panel in solo operation offers a high hot spot resistance and in strings with many modules a solid power yield, even in poor light and partial shading. The noble full-black design makes it a good choice.Characteristics:Gallium-doped technologyReduced hot spot temperatureMulti-busbar technology3 bypass diodesPID resistance (excellent anti-pid performance guarantee thanks to optimized mass production processes and material control)Improved performance in low lightImproved mechanical resistance to external influencesHigh efficiency of 21 %Manufacturer product guarantee: 25 yearsGallium-doped technology:The gallium doping is a method for preventing the light induced degradation (lid). The use of this technology leads to a better performance of solar cells and PV modules as well as optimization of long-term performance and reliability. Reduced hot spot temperature:Another advantage is half-cut production. By halving the electrical current, both of the cells and the cell strands, the hot spot temperature can be reduced by 50 %, which increases the reliability of the PV module.Since the halved cells only have half the work current, the thermal loss of performance of the PV module can be reduced by considerable 25% during operation and the operating temperature of the PV module is lower, which increases reliability and overall performance. Multi-busbar technologyBusbars are located on every PV module. These are power rails that are firmly printed on each solar cell. They absorb the generated direct current and lead it to the collective rails. By using more busbars, Luxen Solar reduces shading, shortens the transport paths and reduces the resistance in the modules. Technical specificationsPerformance (pmax): 410 WPTension (VMP): 31.83 VMax. Electricity (IMP): 12.88 aIdle voltage (VOC): 37.98 VShort circuit current (ISC): 13.77 aModule efficiency: 21 %Operating temperature: -40 ° C - +85 ° CMax. System voltage: 1500 VDC (IEC)Cell type: Half -Cut - MonocrystallineNumber of cells: 108 (6x18)Weight: 21 kgDimensions: 1722 x 1134 x 35 mmProtection type connection box: IP68Module color: blackHoymiles HM-600 Microinverter module inverterThe HM-600 from Hoymiles is the perfect microwicator for your balcony power plant and is suitable for solar power production with a solar panel up to an output of 500 watt peak. Just like all other Hymiles microw replacement, it is suitable for long operating hours and a wide PV module application, since its commissioning is very low (only 22V) and the DC input area of ​​the operating voltage (16-60V) is extremely wide. The Hymiles microving interchangeable converts the solar power obtained from its photovoltaic system, AC-Netz-compliant and feeds it directly into the supply network. Each Hoymiles microv signator is connected individually to a PV module of your system. This unique configuration means that each PV module is controlled by an individual maximum Peak Power Point Tracker (MPPT). This ensures that regardless of the performance of the other PV modules in the system, the maximum available service is fed into the supply network by each individual module. If individual PV modules of the system are impaired by shading, dirty, alignment or false adjustments, the HM-600 still guarantees a peak for its associated PV module. The result is the maximum possible energy production of your PV system. Recommended module performance: up to 380WMaximum input voltage: 60VMaximum input current: 2*11.5aNominal output performance: 600VABattery voltage range: 16 ~ 60VDimensions (WXHXT): 250 x 170 x 28 mmWeight: 3kg (including 2.06m AC cable)Connection setWith the connection cable, you have the option between the connection for a normal Schuko socket or a Wieland feed-in box. When choosing the Schuko variant, the complete system contains an AC extension cable (lengthable length) with Betteri BC01 plug, matching the HM-600 inverter, at one end and a angled Schuko connector at the other end of the cable. This enables the quick and uncomplicated connection to the Schukosteck cans (connector type F), which is common in Germany.When choosing the Wieland variant, the AC cable at the end of the cable has an angled Wieland RST20I3S connector for installation according to the current technical regulations (VDE standard AR-N-4105). The right feed-in socket is then included. With the Wieland connector, the pins are not completely exposed, as with the Schuko connector, which minimizes the risk of a arc between the pin and socket and thus overheating and fire risk. Optional: fastening systemsThe offgridtec balcony power plants are available either with or without fastening sets. You can choose from assembly sets for:- Balcony railing: with suitable C-hooks- Flat roof: inclination angle 10 ° - 60 °- Beaver tail roof: With beaver tail roof hook- Tiegeldach: With 3-way adjustable roof hooks- Wellethernit and sheet metal roof: with stainless steel stock screwsBalcon power plants in GermanyThere is currently no law or regulation in Germany in which the production of solar power is regulated for pure own use. The limit value of a maximum of 600W AC PV power is a reserve value that can be fed into an existing socket dose of a house according to the current VDE standard without overloading it. Nothing is described for independent circuits without additional loads.Each electrical installation should be carried out by VDE. However, the operation of a balcony power plant via the usual Schuko socket is generally not prohibited. The report to the Federal Network Agency is mandatory. However, no cases of order money are known for non -reporting balcony power plants, as well as insurmountable problems with network operators. The system operator is responsible for compliance and implementation of norms and obligations. There are already many professional and legal information on relevant websites.

Das Offgridtec Balkonkraftwerk mit zwei 410W Solarmodulen der LUXPOWER SERIES 5 im schicken Full Black Design, mit einem Hoymiles HM-800 Inverter, Anschlußkabel für verschiedene Dosen und auswählbares Montageset ist eine ideale Möglichkeit einen Teil Ihres benötigten Haushaltsstroms selbst zu produzieren und Ihre Ausgaben für Strom deutlich zu senken. Zusätzlich tragen Sie Ihren eigenen Anteil zum Klimaschutz bei. Die Systeme enthalten neben zwei Solarmodulen und einem passendem Micro-Wechselrichter, alles was zum Anschluss an das hauseigene Stromnetz benötigt wird. Dazu können Sie das Montageset für ein Balkongeländer oder verschiedene Dachkonstruktionen auswählen. Zusätzlich ist noch eine Smart-Steckdose auswählbar. Das Set ist ausgelegt für eine Montage der Module nebeneinander.Funktionsweise:Das Offgridtec Balkonkraftwerk ist eine kompakte Solaranlage. Es besteht aus zwei Solarmodulen und dem passenden Hoymiles Microwechselrichter zur Einspeisung in das hauseigene Stromnetz. Der Wechselrichter wird idealerweise direkt an der Unterkonstruktion des Solarmoduls angebracht und mit dem Solar-Steckverbinder an das Solarmodul angeschlossen. Über den Betteri-Anschluss des Inverters wird das AC-Kabel angeschlossen und direkt zur passenden Steckdose geführt. Hier besteht die Wahl zwischen dem Anschluss an die übliche Schuko-Steckdose oder an eine Wieland-Einspeisesteckdose, welche bei Auswahl im Lieferumfang enthalten ist.Um den erzeugten Solarstrom im Haus-Stromnetz zu nutzen bedarf es keiner gesonderten Einstellung. Ist bereits Strom aus lokalen Quellen vorhanden nutzen die Geräte im Haushalt zuerst diesen und ergänzen dann bei Bedarf mit Netzstrom. Komplettsystem enthält:- 2x Luxen Solar 410W Full Black Solarmodul LUXPOWER SERIES 5- 1x Hoymiles HM-800 Microinverter- 1x Anschlusskabel Betteri BC01 Buchse zu Schukosteckdose (Länge wählbar 5m – 10m – 15m)oder 1x Anschlusskabel Betteri B01 Buchse zu Wieland RST20I3S-Anschluss (Länge wählbar 5m - 10m - 15m)- wählbar: Montagepaket für Balkongeländer – Flachdach – Biberschwanzdach – Ziegeldach – Wellethernit- und Blechdach (die betreffenden Sets enthalten für das Balkonkraftwerk passende 1,20m lange Profilschienen)- wählbar: myStrom WiFi Switch EULuxen 410W LUXPOWER SERIES 5 (Full Black) - Wirkungsgrad von 21%Das Luxpower 410W Full Black Solarmodul der Series 5 von Luxen Solar, ist ein monokristallines und modernes Modul mit Gallium-dotierter Technologie und 108er Halb-Zellen-Layout. Dank der Multi-Busbar Technologie, drei integrierter By-Pass Dioden sowie der zweigeteilten Anordnung der Zellstränge, bietet dieses Solarpanel im Solobetrieb eine hohe Hot-Spot Resistenz und in Strings mit vielen Modulen eine solide Stromausbeute, selbst bei schlechtem Licht und Teilbeschattung. Das edle Full-Black Design macht es zu einer guten Wahl.Eigenschaften:Gallium-dotierte TechnologieReduzierte Hot-Spot TemperaturMulti-Busbar-Technologie3 Bypass-DiodenPID-Resistenz (Exzellente Anti-PID-Leistungsgarantie dank optimierter Massenproduktionsprozesse und Materialkontrolle)Verbesserte Leistung bei schwachem LichtVerbesserte mechanische Widerstandsfähigkeit gegen externe EinflüsseHoher Wirkungsgrad von 21 %Hersteller Produktgarantie: 25 JahreGallium-dotierte Technologie:Die Galliumdotierung ist eine Methode zur Verhinderung des lichtinduzierten Abbaus (LID). Sie führt zu einer besseren Leistung von Solarzellen und PV-Modulen. Reduzierte Hot-Spot TemperaturEin weiterer Vorteil der Half-Cut Fertigung. Durch die Halbierung des elektrischen Stroms sowohl der Zellen als auch der Zellstränge kann die Hot-Spot-Temperatur um 50 % gesenkt werden, was die Zuverlässigkeit des PV-Moduls erhöht. Da die halbierten Zellen nur den halben Arbeitsstrom haben, kann der thermische Leistungsverlust des PV-Moduls während des Betriebs beträchtlich um 25% reduziert werden und die Betriebstemperatur des PV-Moduls ist ebenfalls niedriger, was die Gesamtleistung erhöht. Multi-Busbar-TechnologieBusbars befinden sich auf jedem PV Modul. Es handelt sich dabei um Stromschienen, die auf jeder Solarzelle fest aufgedruckt sind. Sie nehmen den erzeugten Gleichstrom auf und führen diesen zu den Sammelschienen. Durch die Verwendung von mehr Busbars reduziert Luxen Solar die Abschattung, verkürzt die Transportwege und verringert den Widerstand in den Modulen. Technische Daten:Leistung (Pmax): 410 WpSpannung (Vmp): 31,83 VMax. Strom (Imp): 12,88 ALeerlaufspannung (Voc): 37,98 VKurzschlussstrom (Isc): 13,77 AModulwirkungsgrad: 21 %Betriebstemperatur: -40°C - +85°CMax. Systemspannung: 1500 VDC (IEC)Zelltyp: Half-Cut - MonokristallinAnzahl Zellen: 108 (6x18)Gewicht: 21 kgAbmessungen: 1722 x 1134 x 35 mmSchutzart Anschlussdose: IP68Modulfarbe: schwarzHoymiles HM-800 Microinverter ModulwechselrichterDer HM-800 von Hoymiles ist der perfekte Mikrowechselrichter für Ihr Balkonkraftwerk. Das kompakte Leichtgewicht (nur 3kg inklusive dem 2,06m AC-Kabel) eignet sich für die Solarstromproduktion mit bis zu zwei Solarpanelen bis zu einer Leistung von 500W. Genauso wie bei allen anderen Mikrowechselrichtern von Hoymiles ist er für lange Betriebsstunden und breiter PV-Modulanwendung geeignet, da seine Anlaufspannung sehr niedrig (nur 22V) und der DC-Eingangsbereich der Betriebsspannung (16-60V) extrem breit ist. Eigenschaften:Minimierung der Auswirkungen von z.B. Verschattung, Staub oder Alterung durch MPPTHochwertige Energiegewinnung mit hoher MPPT-GenauigkeitOptimale SystemzuverlässigkeitSpitzenwirkungsgrad von 96,7%12 Jahre ProduktgarantieHohe Sicherheit durch integrierte SchutzfunktionenEinfache InstallationLange Lebensdauer6000V StromstoßschutzEntspricht VDE-AR-N 4105: 2018 & EN50549-1:2019Optional ist eine Überwachung über S-Miles App oder S-Miles Cloud. Zur Anlagenüberwachung wird zusätzlich eine DTU Lite benötigt, um auch die Möglichkeit zu haben Einstellungen zu ändern, wird eine DTU Pro benötigt!Optimale Zuverlässigkeit:Mikro-Wechselrichtersysteme sind von Natur aus zuverlässiger als herkömmliche Wechselrichter. Der dezentrale Aufbau eines Mikrowechselrichtersystems stellt sicher, dass es bei einer Störung nicht zum Ausfall der gesamten PV-Anlage kommt. Hoymiles-Mikrowechselrichter sind für den Betrieb mit voller Leistung bei Umgebungstemperaturen von bis zu +65°C (150°F) ausgelegt. Das Gehäuse des Mikro-Wechselrichters ist für die Außeninstallation ausgelegt und entspricht der Schutzart IP67. Technische Daten:Modulleistung: bis zu 500W (je Modul)Spitzenleistung MPPT des Spannungsbereichs: 34~48VAnlaufspannung: 22VBetriebsspannungsbereich: 16~60VMaximale Eingangsspannung: 60VMaximaler Eingangsstrom: 2*12.5AMaximaler Eingangskurzschlussstrom: 2*15ANennausgangsleistung: 800VANennausgangsstrom: 3.48A bei 230VNennausgangsspannung/-bereich: 230V / 180-275VCEC-gewichteter Wirkungsgrad: 96.50%Umgebungstemperaturbereich: -40~+65°CAbmessungen (BxHxT): 250 x 170 x 28 mmGewicht: 3kg (einschließlich 2.06m AC-KabelGehäuseeinstufung: IP67myStrom WiFi Switch EU:Der WiFi Switch EU von myStrom ermöglicht Ihnen einen smarteren Umgang mit Ihren Elektronikgeräten. Messen Sie Ihren Stromverbrauch und -kosten und lassen Sie den WiFi Switch die vorhanden Geräte automatisch an- oder abschalten. Per Timer, Zeitplan oder bei Standy-by. Mit der myStrom App haben Sie die volle Kontrolle über Ihre Geräte, auch wenn Sie einmal nicht direkt vor Ort sind. Der WiFi Switch EU ist zudem auch kompatibel mit Amazon Echo, Google Assistent und vielen mehr.1. Gerät anbringen2. myStrom App öffnen3. Verbinden Technische Daten :max. Leistungsaufnahme: 16ABetriebsspannung: 120VMaterial: PolyvinylchloridGewicht: 120gAbmessungen: 87 x 150 x 87mmAnschluss-Set:Beim Anschluss-Kabel haben Sie die Möglichkeit zwischen dem Anschluss für eine normale Schuko-Steckdose oder einer Wieland Einspeisesteckdose zu wählen. Bei entsprechender Wahl enthält das Komplettsystem ein AC-Verlängerungskabel (Länge wählbar) mit Betteri BC01 Stecker, passend zum HM-800 Inverter, an einem Ende und einem gewinkelten Schuko-Stecker am anderen Kabelende. Damit ist der schnelle und unkomplizierte Anschluss an die, in Deutschland üblichen, Schukosteckdosen (Stecker-Typ F) möglich.Für die Wieland-Einspeisesteckdose verfügt das AC-Kabel am Kabelende über einen gewinkelten Wieland RST20I3S-Stecker für die Installation nach aktuell geltenden technischen Regelwerken (bspw. VDE Norm AR-N-4105). Die passende Einspeise-Steckdose ist dann im Lieferumfang enthalten. Beim Wieland-Stecker sind die Pins nicht komplett freiliegend, wie beim Schuko-Stecker, was die Gefahr eines Lichtbogens zwischen Pin und Buchse und damit die Überhitzung und Brandgefahr minimiert. Optionale Befestigungs-Systeme:Die Offgridtec Balkonkraftwerke gibt es wahlweise mit oder ohne Befestigungs-Sets. Zur Auswahl stehen Montage-Sets für:- Balkongeländer: mit passenden C-Haken- Flachdach: Neigungswinkel 10° - 60°- Biberschwanzdach: mit Biberschwanz-Dachhaken- Ziegeldach: mit 3-fach verstellbaren Dachhaken- Wellethernit- und Blechdach: mit Edelstahl-StockschraubenBalkonkraftwerke in DeutschlandAktuell gibt es in Deutschland kein Gesetz oder Verordnung, in der die Erzeugung von Solarstrom für den reinen Eigenbedarf geregelt wird. Der Grenzwert von maximal 800W AC PV-Leistung ist ein Reservewert, der nach aktueller VDE-Norm in einen bestehenden Steckdosenkreis eines Hauses eingespeist werden kann, ohne diesen zu überlasten. Für eigenständige Stromkreise ohne zusätzliche Belastung wird nichts beschrieben.Jede elektrische Installation sollte VDE-Konform ausgeführt werden. Der Betrieb eines Balkonkraftwerks über die übliche Schuko-Steckdose ist jedoch grundsätzlich nicht verboten. Die Meldung bei der Bundesnetzagentur ist Pflicht. Jedoch sind noch keine Fälle von Ordnungsgeld bei Nichtmeldung von Balkonkraftwerken bekannt, sowie unüberwindbare Probleme mit Netzbetreibern. Die Einhaltung und Umsetzung von Normen und Pflichten obliegt dem Anlagenbetreiber. Hierzu sind bereits viele fachliche und auch juristische Informationen auf einschlägigen Websites zu finden. Sie haben noch Fragen zu Balkonkraftwerken? Sprechen Sie uns an, wir helfen Ihnen gerne weiter.