Battery Accessories
VBS127010010
Victron Battery Switch on/Off 275a Battery main switch
The battery switch is intended for permanent current and is suitable for battery systems up to 48 V. It has a unique ergonomic and aesthetic button for easy operation.
use
With the battery switch, a battery of DC loads and/or DC load sources can be separated. It serves to maintain the battery charge for unattended systems, for system maintenance or in emergencies. With the battery switch, the house battery can also be switched in parallel to the starter battery to supplement a unloaded starter battery or a discharged house battery in an emergency.
installation
The battery switch offers both a surface and back wall assembly and is therefore flexible when installing. It has 4 easily removable side parts for cable access. It is supplied with 16 different label stickers for the individual design of the battery switch.
Security
The button is removable for insulation or security purposes. The battery switch corresponds to the ISO8846 Zuf protection standard and is suitable for use in a machine room.
Max. Permanent current 275 a
1-minute introduction 455 a
Nominal value Home 1250 a
Nominal voltage 48 V
Material of the clamps tinned copper
Material of the hexagon nut Tinned copper
Diameter of the clamp 3/8 inches / 9.53 mm
Recommended torque 70 LBF · Inch / 8 N · M
Base material glass fiber reinforced nylon
Weight 0.4 LB / 0.2 kg
Dimensions (L x W x H) 2.7 x 3.0 x 2.7 inches 69.5 x 76.3 x 69.5 mm
Assembly surface or back wall assembly
ISO8846 / SAE J1171
BS6006
Blue Sea BS 6006 300A battery main switch m series red
m Series - Battery master switch - For small on-board systems, outboard motors and small built-in machines
- Connections made of tinned copper - best contact and maximum corrosion resistance
- 22mm long terminal bolts suitable for M10 ring cable lugs
- Stable, closed-back plastic housing with three slide-in side panels enables cables to be routed from different directions.
- Suitable for surface mounting, installation and countersunk mounting in control panels
- Rotary knob can be pulled off in the off position
- Protection class IP66
- Switching function: ON / OFF
- Peak current (30s): 900A
- Short term load (5 min): 500A
- Continuous load: 300A
- Voltage range up to: 48V DC
- switch positions: 2
Delivery time: 1-3 working days
8-01-010680
Offgridtec® 1M battery cable 50mm² on both sides M8 eyelets
Robust and versatile battery connection cable
The cable is suitable for connecting a battery with M8 round poles to a device that also has an M8 screw terminal. These include the following device classes:
Victron Energy Phoenix inverter
Victron Energy inverter / charger station wagon
All other devices such as charge controllers, inverters or battery chargers, which have an M8 shaft terminal and are to be connected to a battery with the same terminal
Characteristics
Length: 1m
Connections: M8 -> M8
Line cross -section: 50mm²
Certer color: red / black
Suitable for laying in dry and damp rooms, as well as vehicles
Suitable for applications with medium mechanical stress
Oil, cold and UV-resistant, flamed
Note and accessories recommendation
To choose the correct connection cable, always note instructions in the instructions to be connected to the device to be connected. The cable cross -section must be selected so that the power loss is max. 2%.
Scope of delivery:
Battery connection cable 50mm² - 2 single wires red / black 1m
1971300
BOS LE300 Lithium Expansion Battery, Single Block
DAS LE300 SMART BATTERY SYSTEM IST EINE LITHIUM-ERWEITERUNG, UM DIE KAPAZITÄT UND DIE LEISTUNG DER BLEI-BATTERIE ZU ERHÖHEN, SOWIE DIE EFFIZIENZ UND DIE LEBENSDAUER DES GESAMTSYSTEMS ZU VERBESSERN.Die Lithium Erweiterungsbatterie übernimmt die meisten Ladezyklen während die Blei-Batterie als günstige Backup-Speicherung funktioniert. Die Blei-Batterie wird mit einer höheren Priorität geladen wobei die Lithium-Batterie die Überschussenergie übernimmt. Bei der Entladung wird primär die Lithium-Batterie entladen. Dies führt dazu, dass die Lebensdauer der Blei-Batterie deutlich verlängert wird. Der LE300 erkennt die Spannung der Blei- Batterie und beginnt automatisch die Blei-Batterie mit einer Maximalstromstärke von 12,5 A zu unterstützen. Größere Lasten werden von der Bleibatterie und von der Lithium- Batterie parallel versorgt, wodurch beide Batterien mit weniger Strom belastet werden.Alle Vorteile auf einem Blick
Plug & Play > Einfaches anschließen von zwei Kabeln
Flexible Anpassung der Kapazität durch einfaches Zusammenstecken von einzelnen Modulen.
Nutzung vom bestehenden Blei Ladereglern möglich.
Leistungsoptimierung des Batteriesystems durch Ladepriorität der Bleibatterie und bevorzugtes entladen der Lithiumbatterie
Die Leistungsstärke der Lithium Batterie und der Kostenvorteil der Bleibatterie werden vereint.
Schlankes und leichtes Design mit variablen Befestigungsmöglichkeiten.
Integriertes Heizsystem.
Erfahren Sie mehr über die Vorteile der BOS LE300 Batterie und lesen Sie den detaillierten Artikel auf Blauwasser, indem Sie hier klicken.
4 verschiedenen Varianten lieferbar:Lithium Batterie LE300 EinzelmodulLithium Batterie LE300 2er BlockLithium Batterie LE300 4er BlockLithium Batterie LE300 6er Block
Technische Daten
Systemspannung
12 VDC
Nominalspannung
12,8 VDC
Systemspannungsbereich
11 – 15 VDC
Anzahl benutzter Akkus im LE300
IFpR/26/65 [8p/4s] E/-20NA/95 LiFePO4 wiederaufladbare Batterien
Nominal Lithiumkapazität
25,6 Ah/328 Wh
Nutzbare Lithiumkapazität
90 % (23 Ah/295 Wh)
Zyklen Anzahl bei Zimmertemperatur
>2000 Vollzyklen
Empfohlene Bleikapazität je LE300 (nicht inkludiert)
70 – 125 Ah @ 12 VDC
Empfohlenes Lithium/Blei Kapazitätsverhältnis (netto)
1/3 in Solarheimsystemen. Werte variieren je nach benötigter Autonomie und Anwendung.
Fortlaufender Lade- und Entladestrom
Max. 12,5 A zwischen 5 und 40 °C, bei hoher und niedriger Temperatur ist der Strom begrenzt.
Batterieeffizienz
>90 %
Anschlüsse
RAST 5/mini Module 4 pin/ Kommunikationsschnittstelle/ externes Display
Empfohlene Kabeldurchmesser
1,5 – 4 mm²
Betriebstemperatur (Betrieb & Lagerung)
-20 – 50 °C Betriebstemperatur mit maximaler Batterielebensdauer bei 15 -25 °C. Lagertemperatur 10 – 30 °C.
Über- und Untertemperaturschutz, Erhitzung, Ladung & Entladung
Der Temperatursensor verhindert bei der Lithium-Batterie das Laden unter -5°C oder über 55 °C Zelltemperatur. Ladung beginnt sobald die Zelltemp. höher ist als -5 °C. Das Gerät hat ein integriertes Heizsystem, dass zwischen - 20 °C und 10 °C Zelltemperatur aktiviert wird. Entladung ist zwischen -10 °C und 60 °C Zelltemperatur möglich. Für eine höhere Batterielebensdauer läuft das System bei einer Zelltemperatur unter -10 °C im reinen Bleimodus.
Batteriemanagement BMS
Batteriemanagement inklusive Balancer
Schutzfunktionen
Überstrom, Überspannung, Kurzschlüsse, Tiefenentladung, Schutz vor falscher Polarität.
Betriebsmodus/Kompatible externe Batterien
Jede 12 V Blei-Batterie und Blei-Laderegler
Max. Parallelschaltungen von LE300s
Standardgemäß können maximal 24 LE300s miteinander parallel verschaltet werden. Parallelschaltung >24 St. ist nach Absprache mit dem BOS-Händler möglich.
Zertifizierung & zusätzliche Tests
CE, E1, UN38.3Rüttelstreckentest, Vibrationstest, Mechanischer Schocktest, Temperaturwechseldauerlauf
Hinweis: Achten Sie bei Reihenschaltung immer auf die zulässige max. Systemspannung des Solarpanels.Auswahl der verschiedenen Varianten:Lithium Batterie LE300 Einzelmodul: 12V; 25,6 Ah / 328 Wh, 3,4 kg - Art. Nr. 1971300Lithium Batterie LE300 2er Block: 12V; 51,2 Ah / 656 Wh, 6,9 kg - Art. Nr. 1971301Lithium Batterie LE300 4er Block: 12V; 102,4 Ah / 1,31 kWh, 13,7 kg - Art. Nr. 1971302Lithium Batterie LE300 6er Block: 12V; 153,6 Ah / 1,97 kWh, 20,5 kg - Art. Nr. 1971303
1971301
BOS LE300 lithium expansion battery, 2 blocks
Shipping as a dangerous goods for EUR 19 within Germany. For the abroad, please send us an inquiry at mail@frenchman-energy.eu.
The LE300 Smart Battery System is a lithium expansion to increase the capacity and performance of the lead battery, as well as the efficiency and service life of the overall system.
The lithium expansion battery takes over most charging cycles while the lead battery works as a cheap backup storage. The lead battery is loaded with a higher priority, with the lithium battery taking over the surplus energy. When unloading, the lithium battery is primarily unloaded. As a result, the lifespan of the lead battery is significantly extended. The LE300 recognizes the voltage of the lead battery and automatically begins to support the lead battery with a maximum current thickness of 12.5 A. Larger loads are supplied in parallel by the lead battery and the lithium battery, which contains both batteries with less electricity.
All advantages at a glance
Plug & Play> Easy Connection of two cables
Flexible adaptation of the capacity by simply putting together individual modules.
Use of the existing lead loader possible.
Performance optimization of the battery system by loading priority of the lead battery and preferred unloading of the lithium battery
The performance of the lithium battery and the cost advantage of the lead battery are combined.
Slim and light design with variable fastening options.
Integrated heating system.
4 different variants available:
Lithium battery LE300 individual module
Lithium battery LE300 2 Series Block
Lithium battery LE300 4er block
Lithium battery LE300 6 Block
Technical specifications
System voltage
12 VDC
Nominal voltage
12.8 VDC
System voltage range
11 - 15 VDC
Number of used batteries in the LE300
IFPR/26/65 [8P/4S] E/-20NA/95 LIFEPO4 rechargeable batteries
Nominal lithium capacity
25.6 Ah/328 Wh
Usable lithium capacity
90 % (23 Ah/295 Wh)
Cycles number at room temperature
> 2000 full cycles
Recommended lead capacity per LE300 (not included)
70 - 125 AH @ 12 VDC
Recommended lithium/lead capacity ratio (net)
1/3 in Solarheim systems. Values vary depending on the required autonomy and application.
Continuous charging and discharge current
Max. 12.5 A between 5 and 40 ° C, at high and low temperature the electricity is limited.
Battery efficiency
>90 %
connections
RAST 5/MINI modules 4 PIN/ communication interface/ external display
Recommended cable diameter
1.5 - 4 mm²
Operating temperature (operation & storage)
-20 -50 ° C operating temperature with maximum battery life at 15 -
25 ° C. Storage temperature 10 - 30 ° C.
Over- and under temperature protection, heating, charge & discharge
In the lithium battery, the temperature sensor prevents the charging below -5 ° C or above 55 ° C cell temperature. Charge begins as soon as the cell temp. is higher than -5 ° C. The device has an integrated heating system that is activated between - 20 ° C and 10 ° C cell temperature. Discharge is possible between -10 ° C and 60 ° C cell temperature. For a higher battery life, the system runs below -10 ° C in pure bleim mode at a cell temperature.
Battery management BMS
Battery management including balancer
Protective functions
Overcurrent, overvoltage, short circuits, deep discharge, protection against false polarity.
Operating mode/compatible external batteries
Each 12 V lead battery and lead loader
Max. Parallel circuits of LE300S
As standard, a maximum of 24 LE300s can be connected in parallel. Parallel circuit> 24 St. is possible after consultation with the BOS dealer.
Certification & additional tests
CE, E1, Un38.3
Rüttel extent test, vibration test, mechanical shock test, temperature changing time run
Note: Always pay attention to the permissible max. System voltage when switching.
Selection of the different variants:
Lithium battery LE300 single module: 12V; 25.6 AH / 328 Wh, 3.4 kg - Art. 1971300
Lithium battery LE300 2 Series: 12V; 51.2 AH / 656 Wh, 6.9 kg - Art. 1971301
Lithium battery LE300 4er block: 12V; 102.4 AH / 1.31 kWh, 13.7 kg - Art. No. 1971302
Lithium battery LE300 6 Block: 12V; 153.6 AH / 1.97 kWh, 20.5 kg - Art. No. 1971303
BS6006-200
Blue Sea 300 A battery main switch M-series black
M series-battery switch switch-for small on-board nets, outboard motors and small installation machines- Connections made of tinned copper - best contact and maximum corrosion resistance- 22mm long connection bolts suitable for M10 ring cable shoes- Stable, closed plastic housing with three inserted side parts enables the cable feed from different directions.- Suitable for structure, installation, as well as the sunken assembly in switching boards- rotary knob in a pull-out can be removed- Protection class IP66- switching function: ON / OFF- Top load (30 seconds): 900A- Short -term resilience (5 min.): 500A- permanent load: 300a- Tension range up to: 48V DC- switching positions: 2
BBA000100100
Victron Battery Balancer
The Battery Balancer (load state balance) compensates for the charging status of two 12 V batteries connected in series or from several parallel strands of batteries connected in series. When the charging voltage of a 24 V battery system increases to over 27 V, the battery balancer switches on and compares the voltage in the two batteries connected in series. The battery balancer takes the battery (or the batteries connected in parallel) with the highest voltage a current of up to 1 A. The resulting difference in charging current then ensures that all batteries equalize to the same charging status. If necessary, several balancers can be switched in parallel. A 48 V battery bank can be compensated for with three Battery balancers.The problem: The lifespan of an expensive batteryank can be significantly shortened by an imbalance of the charging statusA battery with a slightly increased internal leakage current in a 24V or 48V bank from several in series/paralelled batteries causes this battery and batteries connected in parallel are not sufficiently loaded and the batteries connected in series lead to one in this case Overload. In addition, new cells or batteries should all have the same initial loading status if they are switched into series. Smaller differences can be ironed out during the constant voltage phase or the compensation load. However, larger differences lead to the batteries due to an excessive gas (which is caused by overloading), which had a higher initial charging status and due to sulfation (caused by a lack of charging) in the batteries with less initial charging status.The solution: Battery balancingThe Battery Balancer (load state balance) compensates for the charging status of two 12V batteries connected in series or from several parallel strands of batteries connected in series.When the charging voltage of a 24V battery system increases to over 27.3V, the battery balancer switches on and compares the voltage in the two batteries connected in series. The battery balancer takes the battery (or the batteries connected in parallel) with the highest voltage of up to 0.7a. The resulting difference in charging current then ensures that all batteries adapt to the same level of charge.If necessary, several balancers can be switched in parallel.A 48 V battery bank can be compensated for with three Battery balancers.LED displayGreen: a (battery voltage> 27.3V)Orange: lower battery circuit active (deviation> 0.1V)Orange: Upper battery cycle active (deviation> 0.1V)Red: Alarm (deviation> 0.2V) remains upright until the deviation has decreased to below 0.14V or until the system voltage drops to below 26.6V.Alarm relayNormal open. Closes when the red LED turns on and opens when the red LED turns off.Reset alarmTwo connections are available for connecting a print button. If the two connections are linked, the relay is reset.The "reset" state remains active until the alarm is over. Then the relay closes again when a new alarm occurs.
8-01-002190
Battery pole terminals set
Massive battery terminals for motorcycle and car or solar batteries with all -pole connections. The set consists of a polklem for plus and a polklem for minus. For cables up to 12 mm Ø
Suitable for all car batteries
Material: brass galvanized. (+) Plus and (-) minus in the set
Corrosion -inhibiting alloy brass, zinc, copper
Available immediately!
Delivery time: 1-3 working days
data sheet
Generally
item number
8-01-002190
Manufacturer part number
002190
Manufacturer
Offgridtec
material
Brass
EAN
4007928202215
SC303
Simarine SC303 Shunt 300A for Pico Battery Lighter New version
Innovative combination of side resistance and tank filling module.
SC303 is an active combination-by-fabric resistance for the battery tenants Pico and Pico One with 2 voltage sensors, 2 tank filling stand or temperature sensors, 1x Socet for temperature sensor with JSt connector and 1 current sensor for up to 300 A for systems with up to 75 V.
It can be used to monitor the power consumption of large consumers (inverter, bow and rear beam rudder, anchor winches) and electricity generators (country power charging devices and solar modules). In addition, it enables the monitoring of tanks for fuel, fresh water and gray water.
Operating
Power Source Voltage Range
6 - 35 V
TemPartature range
-20 -+70 ° C
Power Consumption AT 12 V
Operating
0.8 MA
Current Measuring Range
Channel
0.1 - 320 a
Accuracy
± 0,6 %
resolution
0.01 a
Sampling rate
100 ms
Maximum current
Continuous
300 a
Peak Current (<1 min)
400 a
Peak Current (<5 min)
700 a
Voltage Drop AT 300 A
50 mv
Maximum voltage on Connections
35 V
Voltage inputs
Range
0 - 75 V
resolution
1 mv
Accuracy
± 0,2 %
Sampling rate
100 ms
Resistance inputs
Range
0 Ohm - 65 Kohm
Accuracy
± 3,0%
TemPartature sensor - NTC 10K
Range
-15 -+80 ° C
Accuracy (-10-60 ° C, 14-140 ° F)
± 3,0%
Connectivity
Up to
Batteries
1
TemPartature sensors
3
Voltage sensors
2
Sicom RJ9 Sockets
2
Installation and dimension
Dimensions (Langth X Width X Depth)
120 x 120 x 60 mm
Battery Connection
M 10 Bolts
2072
Votronic Switch Unit 100
The Votronic Switch Units work based on a bistable performance relay. Your self -consumption is extremely low. They are particularly suitable as a remote -controlled main switch or as a load relay, which should be switched on for a long time. The current resilience is 40 or 100 A.
The Switch units can be remotely used by a simple switch (1 pol. ON / OFF).
In addition, using an emergency one function (Emergency switch), consumers can also be switched on or off manually on the relay.
The area of application extends to motorhomes, boats to emergency vehicles:
Easy control via simple on / off switch
High switching currents, highly overloadable for a short time
Usable as a battery switch by simple on / off switch (remote control)
Visible switching state display visible from the outside
Electronic delay prevents too fast reaction, e.g. B. voltage burglaries, switch on strong consumers
Suitable for continuous operation (very low self -consumption / conforming EN13976).
No power consumption when switching off via an external switch (remote control)
Automatic shutdown with undervoltage 8.5 V (minimal operating voltage of the Switch Unit)
Technical specifications
Device type
Art.-
No.
Operation-
tension
[V]
Switching current
Permanent load current
[A]
Load current
briefly
[A]
Own
consumption
Calm/a
[Ma]
Cable-
connections
Weight
[G]
Switch unit 40
2071
12 and 24
40
60 (1 second)
0 / <3
2.5 - 10 mm²
97
Switch unit 100
2072
12 and 24
100
150 (10 seconds)
0 / <3
M6
180
Test mark:
CE, e-test (EMV/car directive)
Scope of delivery:
Operating instructions, protective angle (only with Switch Unit 100)
SBS050150200
Victron Smart Battery Sense Long Range
The Smart Battery Sense Long Range from Victron Energy (MPN SBS050150200) is a wireless battery voltage and temperature sensor for many Victron charging and solar charging devices or device combinations. The Battery Sense Long Range is identical to the standard version. Only the transmission performance was increased, which means that instead of 3m up to 10m distance between the battery and charger. With a voltage and temperature sensor, the batteries are better charged, the load efficiency improves and the life expectancy of your batteries is extended, since there is a permanent adjustment of the charging voltage to the battery temperature.
Smart Battery Sense performance features
Avoid errors due to a loss of voltage due to the cable resistance
10m signal range
Make the correct loading voltage safe
Wireless communication with the Victron solar loader over the smart network
Works with 12V, 24V and 48V batteries
Charging the battery is improved
By measuring the voltage directly on the connections of the batteryank, errors are avoided due to a voltage loss due to the cable resistance. In this way, the correct charging voltage is ensured.
In the case of lead batteries, the data of the battery temperature is used to adapt the loading stresses: Cold batteries require a higher charging voltage, whereas hot batteries require a lower charging voltage. With lithium batteries, the temperature data is used to interrupt the charging when the batteries are too cold: loading lithium batteries at temperatures around freezing or below the cells permanently damages the cells.
Wireless communication
The connection between the Smart Battery Sense and one or more solar charger is wireless. A Ve.smart Network is used - a wireless technology based on the Bluetooth smart function. The transmitted data can be used at the same time by one, two or more solar charger, which is/which is/which is/are connected to 12 V, 24 V or 48 V batteryank. The Smart Network is set up using the VictronConnect app.
The installation: neat, simple, smart
The installation is simple, fast and neat. Simply attach the two cable shoes of the device to the battery connections and mount the Smart Battery Sense device directly on the battery with its self-adhesive strip.
Delivery time: 1-3 working days
Scope of delivery:
1x Victron Energy SBS050150200 Smart Battery Sense Long Range 1x operating instructions
data sheet
Generally
item number
8-67-012495
Manufacturer part number
SBS050150200
Manufacturer
Victron Energy
Ambient temperature
-20 ° C - +60 ° C
Weight
0.041 kg
EAN
8719076047919
BPR122022000
Victron Smart BatteryProtect 12V/24V-220A
The Smart BatteryProtect 12V/24V-220A from Victron Energy (MPN BPR122022000) offers solid battery protection at 12V and 24V batteries of various designs. Compared to the previous series, the smart version has an integrated Bluetooth module that connects the Smart BatteryProtect (Smart BP-220) with a smartphone or tablet. In this way you can program all the necessary in/off swelled swells or set the appropriate value from 9 predefined threshold values.
The BatteryProtect 12/24V can also be used as a loading breaker between the battery charger and a lithium battery. A wide operating voltage range of 6-35 V make the device universally applicable. The possibility of connecting an external switch or alarm to the battery-protect make the BP-220 Smart the perfect battery lesser.
Performance features of the Smart BatteryProtect 12V/24V-200A
220a maximum switching capacity
For 12V and 24V batteries with automatic detection of the voltage area, the battery range
Explosion protection by integrated MOSFET switches that replace the relays and thus reduce the risk of sparking to zero
Integrated Bluetooth module, optionally can be switched off
freely programmable insertion and shutdown thresholds, simple and wireless via the VictronConnect app
Alternative programming and status display of the settings via Siebensegentment display possible
Integrated alarm output, 9 predefined threshold values selectable
An external alarm, LED or a relay can be connected to the alarm output
Via relay, the BP's load has been controlled by external events that cannot be programmed in this way
Exit for delayed alarm
The alarm output is activated when the battery voltage falls for more than 12 seconds below the preset value for switching off. Switching on the engine therefore does not activate the alarm. The alarm output is a short-circuit-protected open collector output, which is connected to the negative (minus) rail. Max. Strom 50 mA. The alarm output is usually used to activate an acoustic signal, LED or a relay.
Solid battery protection for every battery type
Due to its diverse configuration options, the Smart BP-220 is the perfect protective device for your battery and thus ensures a maximum lifetime, because most voltage converters or chargers have a undervoltage protection, but this only grabs a fairly low values in the area of the area of 10.5V / 21V are located. The higher this switch -off threshold, the longer you will enjoy your batteries, which are usually pretty cost -intensive.
Note deeper loading:
When using the Battery Protect in conjunction with voltage converters, problems with the re -switching function may occur. Larger voltage converter models (> 1500W) can need a very high capacitor current while switching on, which may put the BP into error mode. This can be avoided with a short turn of the voltage converter.
The protective function of the BP remains.
Scope of delivery:
1x Victron Energy BPR122022000 Smart BatteryProtect 12/24V 220A
1x operating instructions
data sheet
Ambient temperature
-40 ° C - +40 ° C
Dimensions (LXBXH)
12.3 x 12 x 6.2 cm
Manufacturer part number
BPR122022000
guarantee
2 years
humidity
Max. 95 %, not condensing
Manufacturer
Victron Energy
Weight
0.8 kg
SC503
Simarine SC503 Shunt 500A for Pico Battery Later New version
Innovative combination of side resistance and tank filling module.
SC503 is a high-precision combination co-resistance for the battery maker Pico with 2 voltage sensors, 2 temperature sensors, 1x Socet for temperature sensor with JST connector and 1 current sensor for up to 500 A for systems with up to 75 V.
It can be used to monitor the power consumption of large consumers (inverter, bow and rear beam rudder, anchor winches) and electricity generators (country power charging devices and solar modules). In addition, it enables the monitoring of tanks for fuel, fresh water and gray water.
Operating
Voltage range
6 - 35 V
TemPartature range
-20 -+70 ° C
Power Consumption AT 12 V
Operating
1.2 MA
Current Measuring Range
Channel
0.01 - 700 a
Accuracy
± 0,6 %
resolution
0.01 a
Sampling rate
100 ms
Maximum current
Continuous
500 a
Peak Current (<1 min)
700 a
Peak Current (<5 min)
1000 A
Voltage Drop AT 300 A
50 mv
Maximum voltage on Connections
35 V
Voltage inputs
Range
0 - 75 V
resolution
1 mv
Accuracy
± 0,2 %
Sampling rate
100 ms
Resistance inputs
Range
0 Ohm - 65 Kohm
Accuracy
± 3,0%
TemPartature sensor - NTC 10K
Range
-15 -+80 ° C
Accuracy (-10-60 ° C, 14-140 ° F)
± 3,0%
Connectivity
Up to
Batteries
1
TemPartature sensors
3
Voltage sensors
2
Sicom RJ9 Sockets
2
Installation and dimension
Dimensions (Langth X Width X Depth)
120 x 120 x 60 mm
Battery Connection
M 10 Bolts
1971302
BOS LE300 lithium expansion battery, 4 blocks
Shipping as a dangerous goods for EUR 19 within Germany. For the abroad, please send us an inquiry at mail@frenchman-energy.eu.
The LE300 Smart Battery System is a lithium expansion to increase the capacity and performance of the lead battery, as well as the efficiency and service life of the overall system.The lithium expansion battery takes over most charging cycles while the lead battery works as a cheap backup storage. The lead battery is loaded with a higher priority, with the lithium battery taking over the surplus energy. When unloading, the lithium battery is primarily unloaded. As a result, the lifespan of the lead battery is significantly extended. The LE300 recognizes the voltage of the lead battery and automatically begins to support the lead battery with a maximum current thickness of 12.5 A. Larger loads are supplied in parallel by the lead battery and the lithium battery, which contains both batteries with less electricity.All advantages at a glance
Plug & Play> Easy shooting of two cables
Flexible adaptation of the capacity by simply putting together individual modules.
Use of the existing lead loader possible.
Performance optimization of the battery system by loading priority of the lead battery and preferred unloading of the lithium battery
The performance of the lithium battery and the cost advantage of the lead battery are combined.
Slim and light design with variable fastening options.
Integrated heating system.
4 different variants available:Lithium battery LE300 individual moduleLithium battery LE300 2 Series BlockLithium battery LE300 4er blockLithium battery LE300 6 Block
Technical specifications
System voltage
12 VDC
Nominal voltage
12.8 VDC
System voltage range
11 - 15 VDC
Number of used batteries in the LE300
IFPR/26/65 [8P/4S] E/-20NA/95 LIFEPO4 rechargeable batteries
Nominal lithium capacity
25.6 Ah/328 Wh
Usable lithium capacity
90 % (23 Ah/295 Wh)
Cycles number at room temperature
> 2000 full cycles
Recommended lead capacity per LE300 (not included)
70 - 125 AH @ 12 VDC
Recommended lithium/lead capacity ratio (net)
1/3 in Solarheim systems. Values vary depending on the required autonomy and application.
Continuous charging and discharge current
Max. 12.5 A between 5 and 40 ° C, at high and low temperature the electricity is limited.
Battery efficiency
>90 %
connections
RAST 5/MINI modules 4 PIN/ communication interface/ external display
Recommended cable diameter
1.5 - 4 mm²
Operating temperature (operation & storage)
-20 -50 ° C operating temperature with maximum battery life at 15 -25 ° C. Storage temperature 10 - 30 ° C.
Over- and under temperature protection, heating, charge & discharge
In the lithium battery, the temperature sensor prevents the charging below -5 ° C or above 55 ° C cell temperature. Charge begins as soon as the cell temp. is higher than -5 ° C. The device has an integrated heating system that is activated between - 20 ° C and 10 ° C cell temperature. Discharge is possible between -10 ° C and 60 ° C cell temperature. For a higher battery life, the system runs below -10 ° C in pure bleim mode at a cell temperature.
Battery management BMS
Battery management including balancer
Protective functions
Overcurrent, overvoltage, short circuits, deep discharge, protection against false polarity.
Operating mode/compatible external batteries
Each 12 V lead battery and lead loader
Max. Parallel circuits of LE300S
As standard, a maximum of 24 LE300s can be connected in parallel. Parallel circuit> 24 St. is possible after consultation with the BOS dealer.
Certification & additional tests
CE, E1, Un38.3Rüttel extent test, vibration test, mechanical shock test, temperature changing time run
Note: When circuit in series, always pay attention to the permissible max. System voltage of the solar panel.Selection of the different variants:Lithium battery LE300 single module: 12V; 25.6 AH / 328 Wh, 3.4 kg - Art. 1971300Lithium battery LE300 2 Series: 12V; 51.2 AH / 656 Wh, 6.9 kg - Art. 1971301Lithium battery LE300 4er block: 12V; 102.4 AH / 1.31 kWh, 13.7 kg - Art. No. 1971302Lithium battery LE300 6 Block: 12V; 153.6 AH / 1.97 kWh, 20.5 kg - Art. No. 1971303
BPR110048000
Victron Smart BatteryProtect 48V-100A
The Smart BatteryProtect 48/100 from Victron Energy (MPN BPR110048000) offers solid battery protection for 48 V batteries of various designs. Compared to the previous series, the smart version has an integrated Bluetooth module that connects the Smart BatteryProtect (SBP 48/100) with a smartphone or tablet. In this way you can program all the necessary in/off swelled swells or set the appropriate value from 9 predefined threshold values.
The BatteryProtect 48/100 can also be used as a loading breaker between the battery charger and a lithium battery. A wide operating voltage range of 24 - 70 V make the device universally applicable. The possibility of connecting an external switch or alarm to the battery -protect make the SBP 48/100 Smart the perfect battery lesser.
Performance features of the Smart BatteryProtect 48/100
100 a maximum switching capacity
For 48 V batteries with automatic detection of the voltage area, the battery range
Explosion protection by integrated MOSFET switches that replace the relays and thus reduce the risk of sparking to zero
Integrated Bluetooth module, optionally can be switched off
freely programmable insertion and shutdown thresholds, simple and wireless via the VictronConnect app
Alternative programming and status display of the settings via Siebensegentment display possible
Integrated alarm output, 9 predefined threshold values selectable
An external alarm, LED or a relay can be connected to the alarm output
Via relay, the BP's load has been controlled by external events that cannot be programmed in this way
Exit for delayed alarm
The alarm output is activated when the battery voltage falls for more than 12 seconds below the preset value for switching off. Switching on the engine therefore does not activate the alarm. The alarm output is a short-circuit-protected open collector output, which is connected to the negative (minus) rail. Max. Strom 50 mA. The alarm output is usually used to activate an acoustic signal, LED or a relay.
Solid battery protection for every battery type
Due to its diverse configuration options, the Smart SBP 48/100 is the perfect protective device for your battery and thus ensures a maximum lifetime, because most voltage converters or chargers have undervoltage protection, but this only applies at quite low values. The higher this switch -off threshold, the longer you will enjoy your batteries, which are usually pretty cost -intensive.
Selection of the switch -off threshold
Depending on the battery type, different minimum battery tensions apply that must be observed in order not to damage the battery. For AGM/gel batteries, we recommend adjusting the battery protect to 11.5V shutter threshold. For lithium batteries (LIFEPO4), 12.0V switch -off threshold are recommended. Depending on the application of the battery, it may be necessary to change these limits. The manufacturers also provide different information about their batteries. Therefore, always find out from the battery manufacturer which switch -off threshold for your battery is the right one!
Scope of delivery:
1x VICTRON Energy BPR110048000 Smart BatteryProtect SBP 48/100 100a
1x operating instructions
data sheet
Ambient temperature
-40 ° C - +40 ° C
Dimensions (LXBXH)
12.3 x 12 x 6.2 cm
Manufacturer part number
BPR110048000
guarantee
2 years
humidity
Max. 95 %, not condensing
Manufacturer
Victron Energy
Weight
0.8 kg
ARK-2.5H-A1
Growatt ARK 2.5H-A1 High-Voltage Battery LiFePO4 2.56kWh
Die Growatt ARK 2,5H-A2 Hochvolt Batterie (MPN ARK-2.5H-A2) ist ein LiFePO4-Speicher mit hoher Zyklenfestigkeit und langer Lebensdauer. Das modulare, stapelbare Konzept ermöglicht eine flexible Anwendung für verschiedene Szenarien und ist leicht zu installieren. Die Batterie bietet hervorragende Leistungen bei hoher Belastung und ist mit seinem IP65-Schutz auch für die Installation im Freien geeignet. Um Überspannungen im System zu vermeiden, kommt der Softstart zum Einsatz. Die A2-Version ist der Nachfolger der bisherigen ARK 2,5H-A1 und kann auch mit dieser problemlos kombiniert werden.
Über die ARK 2,5H-A2-Batterie:
Modulares, stapelbares Batteriekonzept
Kobaltfreies Lithium-Eisenphosphat (LFP)
Hohe Zyklenfestigkeit und lange Lebensdauer
Wand- oder Bodeninstallation möglich
Softstart zum Schutz des Systems vor Überspannungen
Automatisches Aufwachen bei Unterspannung
Schutzart IP65 für die Installation im Freien
Ferndiagnose und Firmware-Update
Das ARK-Batteriesystem - Version A1 und A2 kombinierbar
Durch das modulare Konzept ist das ARK-System flexibel einsetzbar und bei Bedarf erweiterbar. Ein Batterieturm kann mit mindestens 2 und bis zu 10 Speichermodule errichtet werden, es können auch mehrere Türme in einem System installiert werden. Hierbei kannst du die neue A2 mit der alten A1-Version problemlos kombinieren. Zum Betrieb wird pro Turm ein BMS-Steuerungselement, sowie ein Verbindungskabelset zum entsprechenden Wechselrichter benötigt. Zur Bodeninstallation ist zusätzlich eine Batterie-Basis pro Turm nötig.
Die ARK-Hochvolt-Speicher sind mit den MIN- und MOD-XH, sowie den dreiphasigen SPH- und SPA-Wechselrichtern kompatibel. Je nach Inverter-Serie wird eine andere Steuerungseinheit, ein anderes Verbindungskabelset und eine unterschiedliche Startanzahl der Batterien benötigt. Das ARK-XH-System beginnt mit 2, das ARK-HV-System wiederum mit 3 Batterien.
Einsatzgebiete
Für netzgebundene, sowie autarke Photovoltaikanlagen
Notstromversorgung
Unterbrechungsfreie Stromversorgungen (USV / UPS)
Flexibel Erweitern
Das ARK Batteriesystem von Growatt bietet eine hohe Flexibilität durch seine erweiterbaren Konfigurationsmöglichkeiten, die von 5,12 kWh bis zu 25,6 kWh reichen. Die Installation und Erweiterung des Systems gestaltet sich einfach und unkompliziert durch das modulare Design und die Verwendung von Kabeln. Eine weitere Innovation des ARK Systems ist, dass im Gegensatz zu anderen Batteriesystemen kein Batterieschrank benötigt wird. Lediglich eine Batteriebasis ist für einen stabilen Stand erforderlich.
Softstart zum Schutz des Systems
Der Softstart-Mechanismus ist eine Schutzfunktion, die bei der Growatt-Batterie zum Einsatz kommt, um das System vor Überspannungen zu schützen. Beim Starten oder Einschalten der Batterie wird die Stromversorgung allmählich erhöht, um das System vor Schäden zu bewahren, die durch eine plötzliche Spannungsspitze verursacht werden könnten. Auf diese Weise wird ein reibungsloser und sicherer Betrieb des Batteriesystems gewährleistet.
Hohe Zyklen-Lebensdauer
Die Growatt ARK Batteriemodule sind aufgrund ihrer extrem hohen Zyklen-Lebensdauer und der Verwendung von LiFePo4-Zellen eine ideale Speicherlösung für Photovoltaikanlagen. Unabhängig davon, ob es sich um ein netzgeführtes oder ein Inselsystem handelt, bietet der Growatt Speicher im Vergleich zu herkömmlichen Bleibatterien und anderen Lithium-Technologien zahlreiche Vorteile.
Technische Daten:
Batterie-Typ: Kobaltfreies Lithium-Eisenphosphat (LiFePo4)
Energiekapazität: 2,56 kWh
Nutzbare Kapazität: 2,3 kWh
Nennspannung: 51,2 V
Betriebsspannungsbereich: 47,2-56,8 V
Lade-/Entladestrom: 25 A/0,5 C
Schutzart: IP65
Temperaturbereich: -10~50° C
Abmessung: 650 x 260 x 180 mm
Gewicht: ca. 28 kg
Zertifikate: IEC62619, CE, CEC, RCM, UN38.3
Lieferumfang:
1x Growatt ARK 2,5H-A2 2,56 kWh Hochvoltbatterie
1x Batterieverbindungsset
BAT412151084
Victron AGM 12V 165AH deep cycle battery battery
The AGM 12V 165AH Deep-Cycle Battery from Victron Energy (MPN BAT412151084) is characterized by high cycle strength and is ideal for applications with high-stream discharge due to its low inner resistance, as is the case, for example, when operating an inverter in a solar system.Features of the Victron 12V 165AH deep cycle AGM battery
Victron part number: BAT412151084
Battery tension: 12V
Battery capacity: 165AH
Lifespan at 20 ° C 7-10 years
Cycles at 20 ° C and 30% discharge: 1500
Cycles at 20 ° C and 50% discharge: 600
Cycles at 20 ° C and 80% discharge: 400
low inner resistance
Very good tolerance of high -stream discharge
Weight: 47 kg, dimensions (BXLXH): 48.5 x 17.2 x 24 cm
Typical areas of application
Applications with high-stream discharge, for example solar systems with inverter on the solar battery
Perfectly used as a starter battery
Drive battery
Ray rudder, winds etc.
Low self -discharge
Thanks to the processing of high-pure materials and lead-calcium grids in the Victron AGM 12V 165AH battery, it is ensured that the self-discharge of this battery is particularly low. This prevents the battery from unloading itself too quickly for a long time without charging.Perfect contact: with M8 Cycled cable shoe
Thanks to the permanently integrated copper cable shoes, the deep cycle battery 12V 165AH offers the best possible contact and thus ensures a perfect current flow, without performance losses due to a poor battery connection.
Scope of delivery:
1x Victron Energy BAT412151084 AGM 12V 165AH Deep-Cycle Battery
