Flexible Solar Panels

Das PCB-ETFE 200W Solarpanel von Offgridtec setzt neue Standards mit hochwertigen Materialien wie Teflon-Derivaten vorne, Fiberglas hinten und 5-Busbar-Technologie. Es ist semiflexibel und ideal für 24V-Systeme mit einer Betriebsspannung von über 30,8V. Für 12V-Systeme werden MPPT Laderegler benötigt, die höhere Modulspannungen verarbeiten können. Diese und weitere Qualitätsmerkmale machen das PCB-ETFE 200W von Offgridtec zu einem universell einsetzbaren Produkt der Oberklasse, dass sich auf Booten genauso wohl fühlt wie auf Fahrzeug-Dächern oder anderen Oberflächen und wie kein zweites Stabilität, höchste Zuverlässigkeit und Performance vereint. Es handelt sich um die verbesserte Version unseres 200W 39V Moduls. Diese neue Version bietet eine niedrigere Betriebsspannung, während gleichzeitig der maximale Strom und der Kurzschlussstrom erhöht wurden, was auf eine gesteigerte Effizienz und Leistungsfähigkeit des Moduls hinweist. Bestückt mit monokristallinen A-Grade Solarzellen Zellenwirkungsgrad von über 22,3% 5 Busbar Technologie PCB-Backsheet Begehbar und auch im feuchten Zustand noch rutschfester als vergleichbare Solarmodule Semiflexibel - biegbar bis maximal 18 Grad (längsseitig) Leichte Montage des Solarpanels durch Verkleben oder Nutzung der Ringösen Hohe Lichtdurchlässigkeit von max. 96% Vormontiertes Solarkabel mit MC4 Stecker und Buchse Bewährte Offgridtec Qualität Anwendungsgebiete der Offgridtec PCB-ETFE Serie- uneingeschränkt im Marine-Bereich einsetzbar - bestens geeignet zur Montage auf Wohnmobil, Bus und anderen Fahrzeuge - für die Installation auf gerundeten Blechdächern - empfohlen für alle Systeme, bei denen höchste Zuverlässigkeit und Performance gefordert sind - zur Aufhängung z.B. Zelten beim Campen bestens geeignet, durch die PCB-Trägerschicht halten die Ringösen auch sehr hohen mechanischen Belastungen stand ETFE High-Tec Kunststoff auf der FrontseiteDie Frontseite des Solarpanels ist mit einer High-Tec Kunststoffschicht bedeckt welche auf Ethylen-Tetrafluorethylen-Copolymer ETFE – einem Teflon Derivat (PTFE) – basiert und bietet hervorragenden Schutz vor schädlichen Umwelteinflüssen und ist auch für den Einsatz in Salzwasser geeignet. ETFE ist leichter und zugleich lichtdurchlässiger als andere Kunststofflösungen am Markt. Extrem stabile Fiberglas (PCB) Trägerplatte als Rückseite#Die Rückseite aus Fiberglas (PCB) macht das Modul wesentlich stabiler als herkömmliche Panels mit TPT-Rückseite. Folgende Vorteile bietet Ihnen dieser Aufbau:- verhindert Blasenbildung, die bei TPT-Modulen auf Grund falsche Verklebung auftreten kann - verträgt höhere Temperaturen im Vergleich zum TPT-Aufbau - reduziert die Gefahr von Zellbrüchen durch versehentliches überbiegen des Panels durch den Benutzer Dieses Produkt ist das Ergebnis von gesammelter Erfahrung aus Tausenden Installationen in allen erdenklichen Anwendungsbereich. Bereits vor 5 Jahren haben wir unsere erste Serie flexibler Solarzellen erfolgreich am Markt etablieren können und haben seitdem unsere Module ständig weiterentwickelt und optimiert. Mit der PCB-ETFE Serie profitieren Sie von dieser einmaligen Expertise und können sich auf ein langlebiges Produkt freuen, dass für viele Jahre zuverlässig Strom produzieren wird. Technische Daten- Generatorleistung: 200 Wp - Arbeitsspannung (Vmp): 30,8 V - Leerlaufspannung (Voc): 36,0 V - max. Strom (Imp): 6,50 A - Kurzschlussstrom (Isc): 6,82 A - max. Systemspannung: 200 V - Leistungstoleranz: +/- 3% +- Betriebstemperatur: -40 bis +85°C - Schutzart: IP67- Zellen pro Modul: 3 x 18 - Größe der Zellen: 182 x 91mm - Abmessungen Modul: 1770 x 580 x 3mm - Gewicht: 5,02 kg Lieferumfang:Offgridtec 3-01-010845 PCB-ETFE 200W 30,8V semiflexibles Solarpanel

Offgridtec's PCB-ETFE 100W 36V (MPN 3-01-010835) belongs to the latest generation of semi-flexible solar panels. The PCB-ETFE class sets completely new standards in the area of ​​stability and reliability through the composition of the highest quality materials. While the front is based on Teflon Derivative (PTFE), the back is made of fiberglass (PCB). The ACM module works with 156 mono cells from Solarworld and modern 3-busbar technology. These and other quality features make Offgridtec's PCB-ETFE 100W a universally applicable top-class product that feels just as comfortable on boats as it does on vehicle roofs or other surfaces and combines stability, maximum reliability and performance like no other. Thanks to its high operating voltage of 36V, it is ideal for 24V systems or 12V systems (12V only in connection with MPPT charge controllers that can process a corresponding maximum module voltage ) suitable. The PCB-ETFE 100W 12V solar cell is flexible and, compared to normal flexible solar cells, can also be walked on without hesitation if it is glued over the entire surface. Technical characteristics PCB-ETFE 100W 36V solar panel 100W rated power, high efficiency and 3-busbar technology equipped with monocrystalline A-grade ACM 156 solar cells from Solarworld© higher heat tolerance compared to TPT modules thanks to the PCB backsheet, making it less susceptible to blistering due to poor bonding can be walked on and is even more slip-resistant than comparable solar modules on the market, even when wet semi-flexible - bendable up to a maximum of 15 degrees Easy installation of the solar panel by gluing or using the eyelets suitable for salt water without restrictions, universally applicable ETFE High-Tec plastic ensures weight savings and at the same time high light transmission of max. 96% Junction box with high degree of protection IP67 easy installation thanks to pre-assembled solar cable with MC4 plug and socket proven Offgridtec quality: made exclusively from premium raw materials of the highest quality ETFE high-tec plastic on the front The front of the solar panel is covered with a high-tech plastic layer which is based on ethylene-tetrafluoroethylene copolymer ETFE - a Teflon derivative (PTFE) - and offers excellent Protection against harmful environmental influences and is also suitable for use in salt water. ETFE is lighter and at the same time more translucent than other plastic solutions on the market. Extremely stable fiberglass (PCB) carrier plate as back The fiberglass (PCB) backing makes the module much more stable than conventional panels with TPT backing.This structure offers you the following advantages: prevents blistering that can occur with TPT modules due to incorrect bonding can withstand higher temperatures compared to the TPT structure reduces the risk of cell breakage caused by accidental overbending of the panel by the user Technical characteristics PCB-ETFE 100W 36V solar panel Working voltage (Vmp): 39.6V Open Circuit Voltage (Voc): 46.61 V max current (Imp): 2.53 A Short circuit current (Isc): 2.73 A max. System voltage: 200 V Dimensions: 845 x 680 x 3 mm Weight: 3.8 kg Part number: 3-01-010835 Application areas of the Offgridtec PCB-ETFE series unlimited use in the marine sector ideally suitable for mounting on mobile homes, buses and other vehicles for installation on rounded tin roofs recommended for all systems that require maximum reliability and performance ideally suitable for hanging up, e.g. when camping, thanks to the PCB carrier layer, the ring eyelets also withstand very high mechanical loads About the PCB-ETFE series This product is the result of accumulated experience from thousands of installations in every conceivable application area. We were able to successfully establish our first series of flexible solar cells on the market 7 years ago and have continuously developed and optimized our modules ever since. With the PCB-ETFE series, you benefit from this unique expertise and can look forward to a durable product that will reliably produce electricity for many years. Scope of delivery: Offgridtec 3-01-010835 PCB-ETFE 100W 36V semi-flexible solar panel data sheet:generator output wp 100 Wpmax. System voltage (V) 200 V/DCmodule voltage (VMP) 39.6 Vshort circuit current (ISC) 2.73 Asolar module - size connection cable 4mmopen circuit voltage (VOC) 46.6 V, 46.61 Vweight 4kgsolar module - bendability max. 18 degreessolar module - cable length 0.8 msolar module - connection box (IP) IP65 / IP 67, IP65 / IP67 system voltage 24Vmanufacturer part number 010835temperature coefficient 1 -0.45% / degrees Celsiuscell efficiency>21%manufacturer Offgridtechumidity max.100%tolerance ±3%guarantee 2 yearsEAN 4250983255287solar panel - cell type monocrystallinesolar panel - number of cells 72 (3x24)solar panel - installed diodes 2x IOSQO50 bypass diodeDimensions 845 x 680 x 3 mm

Das semi-flexible ETFE-AL 120W V2 Solarpanel von Offgridtec (MPN 018430) basiert auf einer wegweisenden Material-Komposition (Aluminium-ETFE) und ist mit hoch-effektiven Mono-Zellen bestückt. Die Ausgangsspannung liegt bei 18V DC, was es für eine Vielzahl von Anwendungs-Szenarien sehr interessant macht. Zudem ist es begehbar und deutlich rutschfester als seine Vorgänger, dadurch ist es für den Marine- und Mobilbereich die perfekte Wahl. Der Strom wird von modernsten Solarzellen geliefert, die dank aktuellster Technologie einen beachtlichen Zell-Wirkungsgrad vorweisen können und sich außerdem durch niedrige Werte bei der Leistungs-Degradation von der Masse abhebt.Es handelt sich um die neue und verbesserte Version des beliebten ETFE-AL 120W Solarpanels (3-01-011050), es garantiert dank modernster Fertigung eine konstant hohe Qualität und Leistung bei maximaler Lebensdauer. Über das 120W ETFE AL V2 Solarmodul 2 überlagerte ETFE Schichten verbesserte Rutsch-Hemmung langfristig höhere Erträge durch bessere Lichtdurchlässigkeit solide ETFE-Front bietet Schutz gegen Hagel beständig gegen Salzwasser arbeitet mit 5 Busbar-Technologie integriertes AL-Backsheet ETFE Schichten Auf der Modul-Vorderseite sorgen 2 überlagerte ETFE Schichten für soliden Schutz der innenliegenden Zellen und eine hohe Lichtausbeute über viele Jahre hinweg. Dank einer neuen Struktur der äußersten Schicht wurde die Rutsch-Hemmung deutlich verbessert und das Modul kann problemlos begangen werden. Langfristig werden höhere Erträge durch bessere Lichtdurchlässigkeit und deutlich weniger Eintrübung der transparenten ETFE Front-Schichten im Vergleich zu herkömmlichen Solarmodulen mit abweichenden Frontbeschichtungen erzielt. Die solide ETFE-Front bietet starken Schutz gegen Hagel und macht das Modul absolut beständig gegen Salzwasser. Durch das integrierte AL-Backsheet ist das Entstehen von Zellrissen durch falsche Handhabung oder Montage nahezu ausgeschlossen. Die Serie wird mit besten Solarzellen bestückt, die einen hohen Zell-Wirkungsgrad von 22,3 Prozent bieten. 5 Busbar-Technologie Das Strom-Management wird von 5 Busbars abgewickelt. Bei dieser fortschrittlichen Technologie erfolgt die Stromverwaltung über fünf elektrische Leiterbahnen (Busbars). Dies ermöglicht einen zuverlässigen Durchsatz, selbst bei hohen Stromstärken, während gleichzeitig Wärmeverluste minimiert werden. Durch die effiziente Verteilung des Stroms wird eine solide Leistungsfähigkeit der Solarmodule sichergestellt, was zu einer verbesserten Gesamteffizienz und höheren Erträgen führt. Monokristalline Solarzellen Monokristalline Solarmodule sind eine fortschrittliche Form von Photovoltaik-Modulen, die aus einem einzigen Kristallgitter hergestellt werden. Dieser kristalline Aufbau ermöglicht eine höhere Effizienz bei der Umwandlung von Sonnenlicht in elektrische Energie im Vergleich zu anderen Arten von Solarmodulen. Die monokristallinen Zellen zeichnen sich durch ihre gleichmäßige Struktur aus, die eine effizientere Bewegung der Ladungsträger ermöglicht. Dies führt zu einer besseren Leistungsfähigkeit, insbesondere in Situationen mit begrenztem Platzangebot, da monokristalline Module eine höhere Leistungsdichte aufweisen. Technische Merkmale des ETFE-AL Leistung (Pmax): 120 Wp Spannung (Vmp): 18,8 V max. Strom (Imp): 6,39 A Kurzschlussstrom (Isc): 6,70 A Leerlaufspannung (Voc): 22 V max. Systemspannung: 200 V Abmessungen (LxBxH): 1120 x 580 x 4 mm Betriebs-Temperatur Bereich: -40°C - 85°C Modulwirkungsgrad: 22,3% integrierte Bypass-Dioden Material-Komposition: Aluminium, ETFE begehbar: Ja Biegbar: max. 10° (L) Gewicht: 4,19kg Lieferumfang: 1x Offgridtec ETFE-AL 120W V2 semi-flexibles 18V Solarmodul

The semi-flexible ETFE-AL 160W V2 solar panel from Offgridtec is based on a pioneering material composition (aluminium-ETFE) and is equipped with highly efficient mono cells. The output voltage is 18V DC, which makes it very interesting for a variety of application scenarios. It can also be walked on and is significantly more slip-resistant than its predecessors, making it the perfect choice for marine and mobile applications. The power is supplied by state-of-the-art solar cells which, thanks to the latest technology, have a remarkable cell efficiency and also stand out from the crowd thanks to their low power degradation values.
This is the new and improved version of the popular ETFE-AL 160W solar panel (3-01-012500). In the new version, the solar modules are equipped with both improved solar cells and 11 busbars, which leads to improved light absorption and reduces the effect of partial shading. About the 160W ETFE AL V2 solar module 2 superimposed ETFE layers improved slip inhibition higher yields in the long term due to better light transmission solid ETFE front offers protection against hail resistant to salt water Works with 11-busbar technology integrated AL backsheet minimises risk of cell cracking ETFE layers On the front of the module, 2 superimposed ETFE layers ensure solid protection of the internal cells and a high light yield over many years. Thanks to a new structure of the outermost layer, the slip resistance has been significantly improved and the module can be walked on without any problems. In the long term, higher yields are achieved thanks to better light transmission and significantly less clouding of the transparent ETFE front layers compared to conventional solar modules with different front coatings. The solid ETFE front provides strong protection against hail and makes the module absolutely resistant to salt water. The integrated AL backsheet virtually eliminates the risk of cell cracks caused by incorrect handling or installation. The series is fitted with the best solar cells, which offer a high cell efficiency of 22.3 per cent. 11 Busbar technology Power management is handled by 11 busbars. With this advanced technology, the current is managed via eleven electrical conductor paths (busbars). This enables reliable throughput, even at high current levels, while minimising heat losses. The efficient distribution of the current ensures a solid performance of the solar modules, resulting in improved overall efficiency and higher yields. Monocrystalline modules Monocrystalline solar modules are an advanced form of photovoltaic module made from a single crystal lattice. This crystalline structure enables higher efficiency in the conversion of sunlight into electrical energy compared to other types of solar modules. The monocrystalline cells are characterised by their uniform structure, which enables a more efficient movement of the charge carriers. This leads to better performance, especially in situations where space is limited, as monocrystalline modules have a higher power density. Technical data Power (Pmax): 160 Wp Voltage (Vmp): 18.2 V Max. current (Imp): 8.80 A Open circuit voltage: 21.3 V Short-circuit current (Isc): 9.23 A max. system voltage: 200 V Module efficiency: 22.3 % Dimensions (LxWxH): 1110 x 765 x 4 mm Operating temperature range: -40°C - 85°C integrated bypass diodes Material composition: aluminium, ETFE walkable: Yes Bendable: max. 10° (L) Weight: 5.06kg Scope of delivery 1x Offgridtec ETFE-AL 160W V2 semi-flexible 18V solar module

The offgridtec 010905 ETFE SPR-F 160W is a semi-flexible high-performance solar cell, which is ideally suited both as a solar module for the motorhome, as well as especially for marine use on sailing yachts, motor yachts and other boat types. The module is ideal for 12V system voltage, in conjunction with an MPPT loader. The ETFE 160W 12V solar cell is flexible and also safely accessible if fully gluing. The surface of the plastic solar glass produced from ETFE is slightly corrugated, which makes it accessible even when wet.   ETFE, high-tec plastic solar glass combined with sprouting cells The front side of the solar panel is covered with a high-tec plastic layer which is based on ethylene tetrafluorethylene copolymer etfe-a Teflon derivative (PTFE)-and offers excellent protection against harmful environmental influences and is also suitable for use in the vicinity of salt water. ETFE is easier and more translucent than other plastic solutions on the market.   Technical properties of the ETFE SPR-F 160W solar module 160W nominal output with an operating voltage of 27.3V and a current of 5.86a accessible and even when it is wet, even more slippers as a comparable solar modules on the market Semiflexible - bendable up to a maximum of 30 degrees Easy assembly of the solar panel by gluing or using the ring osle specially developed for long-term marine use ETFE high-tec plastic ensures weight savings and a high light permeability of max. 96% at the same time Connection box with protection class IP65 Simple installation thanks to pre -assembled solar cables with MC4 plug and socket Small dimensions (LXBXH): 1460 x 540 x 2mm Assembly of the solar panel by gluing or using the ring osle Manufacturer number number (MPN): 010905 Light weight: only 3 kg Proven offgridtec quality: made exclusively from premium raw materials of the highest quality level About the ETFE series The offgridtec etfe solar panel series consists of a total of 7 modules in the power range from 20W to a maximum of 1120W. You can also find more information about the technical properties of the ETFE series from the official brochure. Scope of delivery: Offgridtec 3-01-010905 ETFE SPR-F-140 160W 12V solar module flexibledata sheet Generator performance WP 160 WP Solar module - plug -in type MC4 Solar module - eyelet 6 ring osle Solar module - size eyelet 6.75 mm Max. System voltage 45 V Solar module - size connection cable 4 mm - 6 mm Module voltage (VMP) 27.3 V Max. Electricity (IMP) 5.86 a Idle voltage (VOC) 32.2 V Short circuit current (ISC) 6.21 a Solar module - cable length 0.8 m Solar module - connection box (IP) IP67 Cell type Monocrystalline SPR high -performance cells System voltage 12 V Ambient temperature -40 ° C - +85 ° C Weight 3.0 kg Cell efficiency >21% Manufacturer Offgridtec tolerance +/- 3% Product Marine solar module Solar module - cable cross -section 4 mm Solar module - performance guarantee ten years* Solar module - installed diodes 2x iOSQO50 bypass diode Solar module - accessibility accessible* Solar module - bendability Max. 30 degrees Dimensions 1460 x 540 x 2 mm

The Offgridtec PCB-ETFE 50W 39V (MPN 3-01-010830) belongs to the latest generation of semi-flexible solar panels. The PCB-ETFE class sets completely new standards in the area of ​​stability and reliability through the composition of the highest quality materials. While the front is based on Teflon Derivative (PTFE), the back is made of fiberglass (PCB). The module works with modern 3-busbar technology. These and other quality features make Offgridtec's PCB-ETFE 50W a universally applicable top-class product that feels just as comfortable on boats as it does on vehicle roofs or other surfaces and combines stability, maximum reliability and performance like no other. Thanks to its high operating voltage of 39.6V, it is ideal for 24V systems or 12V systems (12V only in connection with MPPT charge controllers that can process a corresponding maximum module voltage). The PCB-ETFE 50W 39V solar cell is flexible and, compared to normal flexible solar cells with full-surface bonding, can also be walked on without hesitation. Technical characteristics PCB-ETFE 50W 39V solar panel 50W rated power, high efficiency and 3-busbar technology equipped with monocrystalline A-grade solar cells Higher heat tolerance compared to TPT modules thanks to the PCB backsheet, making it less prone to blistering due to poor bonding walkable and, even when wet, more non-slip than comparable solar modules on the market semi-flexible - bendable up to a maximum of 15 degrees easy installation of the solar panel by gluing or using the eyelets Fully suitable for salt water, universally applicable ETFE High-Tec plastic ensures weight savings and at the same time high light transmission of max. 96% Junction box with high degree of protection IP67 easy installation thanks to pre-assembled solar cable with MC4 plug and socket proven Offgridtec quality: made exclusively from premium raw materials of the highest quality ETFE High-Tec plastic on the front The front of the solar panel is covered with a high-tech plastic layer based on ethylene-tetrafluoroethylene copolymer ETFE - a Teflon derivative (PTFE) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. ETFE is lighter and at the same time more translucent than other plastic solutions on the market. Extremely stable fiberglass (PCB) backing board The fiberglass (PCB) back makes the module much more stable than conventional panels with a TPT back. This structure offers you the following advantages: prevents blistering that can occur with TPT modules due to improper bonding tolerates higher temperatures compared to the TPT construction reduces the risk of cell breakage caused by the user accidentally over-bending the panel Technical characteristics PCB-ETFE 50W 39V solar panel: Working Voltage (Vmp): 39.6V Open Circuit Voltage (Voc): 46.61V Max Current (Imp): 1.26A Short Circuit Current (Isc): 1.36A Max. system voltage: 200 V Dimensions: 510 x 590 x 3mm Weight: 2.5 kg Part number: 3-01-010830 Areas of application for the Offgridtec PCB-ETFE series unrestricted use in the marine sector Ideally suited for mounting on mobile homes, buses and other vehicles for installation on rounded sheet metal roofs recommended for all systems that require maximum reliability and performance ideal for hanging up tents when camping, thanks to the PCB carrier layer, the eyelets also withstand very high mechanical loads About the PCB-ETFE series? This product is the result of accumulated experience from thousands of installations in every conceivable application. Already 5 years ago we were able to successfully establish our first series of flexible solar cells on the market and since then we have continuously developed and optimized our modules. With the PCB-ETFE series, you benefit from this unique expertise and can look forward to a durable product that will reliably produce electricity for many years to come.? Scope of delivery: ? Offgridtec 3-01-010830 PCB-ETFE 50W 39V semi-flexible solar panel Generator power wp 50 Wp Solar panel - size connection cable 4mm Solar panel - cable length 0.8m Module Voltage (VMP) 39.6v max current (IMP) 1.26A Short circuit current (ISC) 1.36A Solar module - connection box (IP) IP65 / IP67, IP65 / IP67 Open Circuit Voltage (VOC) 46.61v weight 2.5kg Solar panel - installed diodes 2x IOSQO50 bypass diodes system voltage 24V Manufacturer part number 010830 Max system voltage 200VDC Temperature coefficient 1 -0.45% / degree Celsius cell efficiency 20.6% Manufacturer off-grid tec humidity max 100% tolerance ±3% EAN 4250983255263 Solar panel - number of cells 72 (3x24) Solar panel - cell type monocrystalline Dimensions 510x590x3mm

The offgridtec 010895 ETFE SPR-F-100 120W is a semi-flexible high-performance solar cell, which is ideally suited both as a solar module for the motorhome, as well as especially for the use of navy on sailing yachts, motor yachts and other boat types. The module is ideal for 12V system voltages. The ETFE 120W 12V solar cell is flexible and, compared to the standard 110 watt flex solar panel, is also safely accessible when fully bonded. The surface of the plastic solar glass produced from ETFE is slightly corrugated, which makes it accessible even when wet. ETFE High-Tec Plastic Solar glass combined with SPR high-performance cells The front side of the solar panel is covered with a high-tec plastic layer which is based on ethylene-tetrafluorethylene copolymer etfe-a Teflon derivative (PTFE)-and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. ETFE is easier and more translucent than other plastic solutions on the market. Together with the built-in SPR (Sunpower), high-performance cells from American production, these two components form an optimal basis for a marine solar panel in the upper class. Technical properties of the ETFE SPR-F-100 120W solar module 120W nominal output with an operating voltage of 19.8V and a current of 6.05a accessible and even when it is wet, even more slippers as a comparable solar modules on the market Semiflexible - bendable up to a maximum of 30 degrees Easy assembly of the solar panel by gluing or using the ring osle specially developed for long-term marine use ETFE high-tec plastic ensures weight savings and a high light permeability of max. 96% at the same time Equipped with market -leading high -performance solar cells from SunPower for a highest possible efficiency Connection box with protection class IP65 Easy installation thanks to pre-assembled solar cables with solar connector and socket Small dimensions (LXBXH): 1070 x 540 x 2 mm Assembly of the solar panel by gluing or using the ring osle Manufacturer number number (MPN): 010895 Light weight: only 2.08 kg Proven offgridtec quality: made exclusively from premium raw materials of the highest quality level About the ETFE series The offgridtec etfe solar panel series consists of a total of 7 modules in the power range from 20W to a maximum of 150W. You can also find more information about the technical properties of the ETFE series from the official brochure. Scope of delivery: 1x offgridtec 3-01-010895 ETFE SPR-F-100 120W 12V solar module flexible   data sheet Generally Generator performance WP 120 WP Solar module - size connection cable 4 mm - 6 mm Solar module - cable length 0.8 m Solar module - plug -in type MC4 Solar module - eyelet 6 ring osle Solar module - size eyelet 6.75 mm Solar module - connection box (ABM) 89 x 16 x 15 mm Cell efficiency >24% Max. Electricity (IMP) 6.05 a Short circuit current (ISC) 6.41 a Module voltage (VMP) 19.8 V Idle voltage (VOC) 23.4 V Dimensions 1070 x 540 x 2 mm Solar module - connection box (IP) IP67 Solar module - bendability Max. 30 degrees Cell type Monocrystalline SPR high -performance cells EAN 4250983255515 System voltage 12 V Max. System voltage 200 V/DC Ambient temperature -40 ° C - +85 ° C Manufacturer Offgridtec humidity max. 100 %, not condensing tolerance +/- 3% guarantee 5 years Manufacturer part number 010895 Solar module - accessibility accessible* Solar module - cell type Spr Monocrystalline high -performance cells (original Sunpower) Solar module - performance guarantee ten years* Solar module - connection box HX-021 Solar module - installed diodes 1 x bypass diode Weight 2.08 kg

Das semi-flexible ETFE-AL 100W V2 Solarpanel von Offgridtec basiert auf einer wegweisenden Material-Komposition (Aluminium-ETFE) und ist mit hoch-effektiven monokristallinen Zellen bestückt. Die Modulspannung liegt bei 23V, was es für eine Vielzahl von Anwendungs-Szenarien sehr interessant macht. Zudem ist es durch die ETFE-beschichteten Zellen für den Marine- und Mobilbereich die perfekte Wahl. Der Strom wird von modernsten Solarzellen geliefert, die dank aktuellster Technologie einen beachtlichen Zell-Wirkungsgrad vorweisen können und sich außerdem durch niedrige Werte bei der Leistungs-Degradation von der Masse abhebt. Es handelt sich um die neue und verbesserte Version des beliebten ETFE-AL 100W Solarpanels und garantiert dank modernster Fertigung eine konstant hohe Qualität und Leistung bei maximaler Lebensdauer. 2 überlagerte ETFE Schichten verbesserte Rutsch-Hemmung langfristig höhere Erträge durch bessere Lichtdurchlässigkeit solide ETFE-Front bietet Schutz gegen Hagel beständig gegen Salzwasser arbeitet mit 5 Busbar-Technologie integriertes AL-Backsheet ETFE SchichtenAuf der Modul-Vorderseite sorgen 2 überlagerte ETFE Schichten für soliden Schutz der innenliegenden Zellen und eine hohe Lichtausbeute über viele Jahre hinweg. Dank einer neuen Struktur der äußersten Schicht wurde die Rutsch-Hemmung deutlich verbessert und das Modul kann problemlos begangen werden. Langfristig werden höhere Erträge durch bessere Lichtdurchlässigkeit und deutlich weniger Eintrübung der transparenten ETFE Front-Schichten im Vergleich zu herkömmlichen Solarmodulen mit abweichenden Frontbeschichtungen erzielt. Die solide ETFE-Front bietet starken Schutz gegen Hagel und macht das Modul absolut beständig gegen Salzwasser. Durch das integrierte AL-Backsheet ist das Entstehen von Zellrissen durch falsche Handhabung oder Montage nahezu ausgeschlossen. Die Serie wird mit besten Solarzellen bestückt, die einen hohen Zell-Wirkungsgrad von 22,3 Prozent bieten. 5 Busbar-TechnologieDas Strom-Management wird von 5 Busbars abgewickelt. Bei dieser fortschrittlichen Technologie erfolgt die Stromverwaltung über fünf elektrische Leiterbahnen (Busbars). Dies ermöglicht einen zuverlässigen Durchsatz, selbst bei hohen Stromstärken, während gleichzeitig Wärmeverluste minimiert werden. Durch die effiziente Verteilung des Stroms wird eine solide Leistungsfähigkeit der Solarmodule sichergestellt, was zu einer verbesserten Gesamteffizienz und höheren Erträgen führt. Monokristalline SolarzellenMonokristalline Solarmodule sind eine fortschrittliche Form von Photovoltaik-Modulen, die aus einem einzigen Kristallgitter hergestellt werden. Dieser kristalline Aufbau ermöglicht eine höhere Effizienz bei der Umwandlung von Sonnenlicht in elektrische Energie im Vergleich zu anderen Arten von Solarmodulen. Die monokristallinen Zellen zeichnen sich durch ihre gleichmäßige Struktur aus, die eine effizientere Bewegung der Ladungsträger ermöglicht. Dies führt zu einer besseren Leistungsfähigkeit, insbesondere in Situationen mit begrenztem Platzangebot, da monokristalline Module eine höhere Leistungsdichte aufweisen. Technische Daten- Leistung (Pmax): 100 Wp - Spannung (Vmp): 23,9 V - max. Strom (Imp): 4,19 A - Leerlaufspannung (Voc): 28 V - Kurzschlussstrom (Isc): 4,39 A - max. Systemspannung: 200 V - Abmessungen: 980 x 580 x 4 mm - Betriebs-Temperatur Bereich: -40°C - 85°C - integrierte Bypass-Dioden - Material-Komposition: Aluminium, ETFE - begehbar: Ja - Biegbar: max. 10° (L) - Zellwirkungsgrad: 22,3% - Gewicht: 3,44kg Lieferumfang1x Offgridtec ETFE-AL 100W V2 semi-flexibles 23V Solarmodul

Flexible and accessible solar modules from Sunbeam system from SwedenThe Swedish solar specialist Sunbeam system develops solar modules according to the latest technology and with a wide range of circles (on board, on the caravan, etc.). All Sunbeam system modules are extremely thin, flexible and accessible. Thanks to the outstanding energy yield, they are perfect for self -sufficient energy generation on the go.Sunbeam system Tough + is the absolutely latest solar module technology. They impress with an outstanding performance per unit of surface and extreme durability:- Again +13% power ggü. Tough modules - Flush 2.0 cable (still flatter) - Walk -in, non -slip surface - Flexible panel- easy installation- Tinning 1.5m supply line- 5 year guarantee The outstanding performance levy is safely monitored by Sunbeam system's' partner Sunpower. The cells in oneTough + Panel have an impressive efficiency of an average of 23.7% cell efficiency. This allows an approximately 13% higher performance of the tough + modules compared to comparable modules or the tough modules. Tough + has specially developed materials for the tough series. This enables longevity for light and thin solar modules that have never been seen before. TheAnti-slip interface is not only practical and safe, but also has a better light output. The dirt -repellent properties help to keep the panel clean and to ensure optimal, self -sufficient power generation.All tough + modules are with the flatFlush 2.0 cable fitted. This improved cable is 30% flatter, but still has 25% more copper cross -section than the flush (standard) series. Tough + is designed for a screwless assembly. Together with the new, slim cable, there is a thin surface, ideal for integrating the modules on any surface. All tough + models are delivered with structural adhesive tape for quick assembly on a vaulted surface. For a slowly hardening alternative, we recommend using a soft, flexible glue. Technical specifications Article designation Tough+ 46 W Long Flush Black Article no. 1970725 Dimensions 850 x 277 mm Weight 0.8 kg Pmax - max. Performance 46.2 W VOC - Voltage Open Circuit 25.96 V LSC - short circuit current 2.41 a VMP - Max. System voltage 22.68 V IMP - Max. Electricity 2.03 a Ptol - performance tolerance +/- 3% Solar cells Sunpower Max Sys Voltage (including by-pass diode) 30V (80V) Cable length 2 m High shadow tolerance Yes Holes - Note: Always pay attention to the permissible max. System voltage of the solar panel when switching

TheNordic series was one of the main reasons for the foundation of Sunbeam system: the vision of developing a solar module for northern regions with a perfect balance between price and innovation.Nordic offers compact yet powerful solar modules, the details of which are designed for the demanding conditions at sea. All modules have a special arrangement of the cells for better partial shading performance, which cannot be found in competitors.The Nordic models with theFLUSH additives Delivered without fastening holes, which means that they are ideal for glued applications.- Powerful and compact - Improved partial shading performance - Flush version - Flexible panel- walkable coating- 1.5 m supply line- 2 year guarantee All values ​​measured under standard test conditions:1000W / m2, on 1.5 at 25 degrees CelsiusTemp coefficient for ISC 0.05 (% / ° C)Temp coefficient for VOC -0.27 (% / ° C)Temp coefficient from Pmax -0.38 (% / ° C). C100 is intended for the rigid fastening and should not be used on a persenning. We recommend the SP50LOXX or SP50 for flexible use. Technical specifications Article designation Nordic 54W Flush Article no. 1970721 Dimensions 545 x 535 mm Weight 1 kg Pmax - max. Performance 54 W VOC - Voltage Open Circuit 25.74 V LSC - short circuit current 3.06 a VMP - Max. System voltage 19.6 V IMP - Max. Electricity 2.76 a Ptol - performance tolerance +/- 5% Solar cells Sunpower Max Sys Voltage (including by-pass diode) 30V Cable length 1.5 m High shadow tolerance Yes Holes - Note: Always pay attention to the permissible max. System voltage of the solar panel when switching

The Tough series has proven to use for years. Due to the large selection of different models, the Tough series offers a universal solution for numerous applications. The tough interface is the preferred choice for the Yacht industry, but also for more industrial off-grid applications. All tough models are withSunpower ™ Maxeon cells Equipped with an efficiency of 22.5% or higher.The surface of the tough series is robust and very resistant to strong and long UV loads. It is more translucent than standard materials and thus contributes to a higher daily production. The special tough structural interface ensures a secure hold, but also catches up with more light in flat sun angles. In addition, all tough models from 55W with theShadow Optimized Technology Equipped that improves the performance when shading. With a thickness of only 3 mm, the panels can be seamlessly attached to any hard surface. Due to the light flexibility, installation on somewhat curved surfaces is also possible. The flat "Flush" connection cable escapes on the back of the panel. It can therefore be moved directly into the interior below the panel. We recommend a soft, flexible glue.- Powerful - flexible- Flush cable - Anti-slip surface - Partly shadow -optimized- 5 year guarantee Flexible panel, walk-in anti-slip coating, 5 year guarantee, tinned 1.5m supply line Technical specifications Article designation Tough 21 W Long Flush Article no. 1970621 Dimensions 147 x 850 mm Weight 0.3 kg Pmax - max. Performance 21 W VOC - Voltage Open Circuit 24.48 V LSC - short circuit current 1.19 a VMP - Max. System voltage 20.88 V IMP - Max. Electricity 0.99 a Ptol - performance tolerance +/- 3% Solar cells Sunpower Max Sys Voltage (including by-pass diode) 30V (50V) Cable length 1.5 m High shadow tolerance - Holes - Note: Always pay attention to the permissible max. System voltage of the solar panel when switching

The Tough series has proven to use for years. Due to the large selection of different models, the Tough series offers a universal solution for numerous applications. The tough interface is the preferred choice for the Yacht industry, but also for more industrial off-grid applications. All tough models are withSunpower ™ Maxeon cells Equipped with an efficiency of 22.5% or higher.The surface of the tough series is robust and very resistant to strong and long UV loads. It is more translucent than standard materials and thus contributes to a higher daily production. The special tough structural interface ensures a secure hold, but also catches up with more light in flat sun angles. In addition, all tough models from 55W with theShadow Optimized Technology Equipped that improves the performance when shading. With a thickness of only 3 mm, the panels can be seamlessly attached to any hard surface. Due to the light flexibility, installation on somewhat curved surfaces is also possible. The flat "Flush" connection cable escapes on the back of the panel. It can therefore be moved directly into the interior below the panel. We recommend a soft, flexible glue.- Powerful - flexible- Flush cable - Anti-slip surface - Partly shadow -optimized- 5 year guarantee Flexible panel, walk-in anti-slip coating, 5 year guarantee, tinned 1.5m supply line Technical specifications Article designation Tough 55 W Long Flush Black Article no. 1970625 Dimensions 1060 x 277 mm Weight 1 kg Pmax - max. Performance 55.4 W VOC - Voltage Open Circuit 21.76 V LSC - short circuit current 3.16 a VMP - Max. System voltage 18.56 V IMP - Max. Electricity 2.98 a Ptol - performance tolerance +/- 3% Solar cells Sunpower Max Sys Voltage (including by-pass diode) 30V (65V) Cable length 1.5 m High shadow tolerance Yes Holes - Note: Always pay attention to the permissible max. System voltage of the solar panel when switching

 Flexibles Panel, begehbare Anti-Rutsch Beschichtung, 5 Jahre Garantie, verzinnte 2m Zuleitung, inkl. 3M Doppelseitiges Klebeband, Wirkungsgrad 24,40% Artikelbezeichnung Tough+ black 61 W flush black Artikel Nr. 1970728 Abmessungen 540 x 540 mm Gewicht 1,3 kg Pmax - Max. Leistung 60,5 W Voc - Voltage open circuit 25,96 Lsc - Kurzschlußstrom 3,22 A Vmp - Max. Systemspannung 30V Imp - Max. Strom 2,03 A Ptol - Leistungstoleranz +/- 3% Solarzellen Sunpower Max sys voltage (incl. by-pass diode) 30V (80V) Kabellänge 2 m Hohe Schattentoleranz Nein Löcher Nein Hinweis: Achten Sie bei Reihenschaltung immer auf die zulässige max. Systemspannung des Solarpanels

The Tough series has proven to use for years. Due to the large selection of different models, the Tough series offers a universal solution for numerous applications. The tough interface is the preferred choice for the Yacht industry, but also for more industrial off-grid applications. All tough models are withSunpower ™ Maxeon cells Equipped with an efficiency of 22.5% or higher.The surface of the tough series is robust and very resistant to strong and long UV loads. It is more translucent than standard materials and thus contributes to a higher daily production.The special tough structural interface ensures a secure hold, but also catches up with more light in flat sun angles. In addition, all tough models from 55W are equipped with the Shadow Optimized Technology, which improves the performance when shading.With a thickness of only 3 mm, the panels can be seamlessly attached to any hard surface. Due to the light flexibility, installation on somewhat curved surfaces is also possible.The flat "Flush" connection cable escapes on the back of the panel. It can therefore be moved directly into the interior below the panel.We recommend a soft, flexible glue. - powerful - Flush cable - Anti-slip surface - Partly shadow -optimized - 5 year guarantee Flexible panel, walk-in anti-slip coating, 5 year guarantee, tinned 1.5m supply line. Technical specifications Article designation Tough 37 W Flush Article no. 1970622 Dimensions 4535 x 378 mm Weight 0.7 kg Pmax - max. Performance 37 W VOC - Voltage Open Circuit 21.77 V LSC - short circuit current 2.11 a VMP - Max. System voltage 18.57 V IMP - Max. Electricity 1.99 a Ptol - performance tolerance +/- 3% Solar cells Sunpower Max Sys Voltage (including by-pass diode) 30V (65V) Cable length 1.5 m High shadow tolerance - Holes 4 x 6 mm Note: Always pay attention to the permissible max. System voltage of the solar panel when switching

 

Tough quality in a black lookThe Tough Black series was designed so that it looks inconspicuous and elegant at the same time. Developed so that it is perfect in the look of both modern yachts and historical ships fits. You can use the Tough Black "Füller" for a really seamless surface integration. An identical material without cells that can be cut to the size to be irregular To fill out shapes that surround the panels.The Tough Black series offers you the same advantages as the normal Tough series. Recommend for installation We have a soft, flexible glue.- Powerful - Flush cable - Anti-slip surface - Partly shadow -optimized - 5 year guarantee- Flexible, walk -in panel-Tinning 1.5m supply line. Technical specifications Article designation Tough 111 W Flush Black Article no. 1970629 Dimensions 1060 x 540 mm Weight 2 kg Pmax - max. Performance 110.8 W VOC - Voltage Open Circuit 21.76 V LSC - short circuit current 6.32 a VMP - Max. System voltage 18.56 V IMP - Max. Electricity 5.97 a Ptol - performance tolerance +/- 3% Solar cells Sunpower Max Sys Voltage (including by-pass diode) 30V (65V) Cable length 1.5 m High shadow tolerance Yes Holes 6 x 6 mm Note: Always pay attention to the permissible max. System voltage of the solar panel when switching

Flexible and accessible solar modules from Sunbeam system from SwedenThe Swedish solar specialist Sunbeam system develops solar modules according to the latest technology and with a wide range of circles (on board, on the caravan, etc.). All Sunbeam system modules are extremely thin, flexible and accessible. Thanks to the outstanding energy yield, they are perfect for self -sufficient energy generation on the go.Sunbeam system Tough + is the absolutely latest solar module technology. They impress with an outstanding performance per unit of surface and extreme durability:- Again +13% power ggü. Tough modules - Flush 2.0 cable (still flatter) - Walk -in, non -slip surface -  easy installation -  5 year guarantee The outstanding performance levy is safely monitored by Sunbeam system's' partner Sunpower. The cells in a tough + panel have an impressive efficiency of an average of 23.7% cell efficiency. This allows an approximately 13% higher performance of the tough + modules compared to comparable modules or the tough modules. Tough + has specially developed materials for the tough series. This enables longevity for light and thin solar modules that have never been seen before. TheAnti-slip interface is not only practical and safe, but also has a better light output. The dirt -repellent properties help to keep the panel clean and to ensure optimal, self -sufficient power generation.All tough + modules are with the flatFlush 2.0 cable fitted. This improved cable is 30% flatter, but still has 25% more copper cross -section than the flush (standard) series. Tough + is designed for a screwless assembly. Together with the new, slim cable, there is a thin surface, ideal for integrating the modules on any surface. All tough + models are delivered with structural adhesive tape for quick assembly on a vaulted surface. For a slowly hardening alternative, we recommend using a soft, flexible glue. Flexible panel, walk-in anti-slip coating, 5 year guarantee, tinned 1.5m supply line Technical specifications Article designation Tough+ 121 W Flush Black Article no. 1970727 Dimensions 1060 x 540 mm Weight 2.5 kg Pmax - max. Performance 121 W VOC - Voltage Open Circuit 25.96 V LSC - short circuit current 6.43 a VMP - Max. System voltage 20.16 V IMP - Max. Electricity 6.01 a Ptol - performance tolerance +/- 3% Solar cells Sunpower Max Sys Voltage (including by-pass diode) 30V (80V) Cable length 2 m High shadow tolerance Yes Holes - Note: Always pay attention to the permissible max. System voltage of the solar panel when switching

TheNordic series was one of the main reasons for the foundation of Sunbeam system: the vision of developing a solar module for northern regions with a perfect balance between price and innovation.Nordic offers compact yet powerful solar modules, the details of which are designed for the demanding conditions at sea. All modules have a special arrangement of the cells for better partial shading performance, which cannot be found in competitors.The Nordic models with theFLUSH additives Delivered without fastening holes, which means that they are ideal for glued applications.- Powerful and compact - Improved partial shading performance - Flush version - Flexible panel- walkable coating-1.5 m supply line- 2 year guarantee All values ​​measured under standard test conditions:1000W / m2, on 1.5 at 25 degrees CelsiusTemp coefficient for ISC 0.05 (% / ° C)Temp coefficient for VOC -0.27 (% / ° C)Temp coefficient from Pmax -0.38 (% / ° C). C100 is intended for the rigid fastening and should not be used on a persenning. We recommend the SP50LOXX or SP50 for flexible use. Technical specifications Article designation Nordic 104W Flush Article no. 1970722 Dimensions 1060 x 540 mm Weight 2 kg Pmax - max. Performance 104 W VOC - Voltage Open Circuit 22.69 V LSC - short circuit current 6.34 a VMP - Max. System voltage 17.55 V IMP - Max. Electricity 5.93 a Ptol - performance tolerance +/- 5% Solar cells Sunpower Max Sys Voltage (including by-pass diode) 30V Cable length 1.5 m High shadow tolerance Yes Holes - Note: Always pay attention to the permissible max. System voltage of the solar panel when switching

TheNordic series was one of the main reasons for the foundation of Sunbeam system: the vision of developing a solar module for northern regions with a perfect balance between price and innovation.Nordic offers compact yet powerful solar modules, the details of which are designed for the demanding conditions at sea. All modules have a special arrangement of the cells for better partial shading performance, which cannot be found in competitors.The Nordic models with theFLUSH additives Delivered without fastening holes, which means that they are ideal for glued applications.- Powerful and compact - Improved partial shading performance - Available as a flush version - Flexible panel- walkable coating- 0.8 m supply line- Junction box- 2 year guarantee All values ​​measured under standard test conditions:1000W / m2, on 1.5 at 25 degrees CelsiusTemp coefficient for ISC 0.05 (% / ° C)Temp coefficient for VOC -0.27 (% / ° C)Temp coefficient from Pmax -0.38 (% / ° C). C100 is intended for the rigid fastening and should not be used on a persenning. We recommend the SP50LOXX or SP50 for flexible use. Technical specifications Article designation Nordic 54W JBox Article no. 1970720 Dimensions 545 x 535 mm Weight 1 kg Pmax - max. Performance 54 W VOC - Voltage Open Circuit 21.0 V LSC - short circuit current 1.6 a VMP - Max. System voltage 18.5 V IMP - Max. Electricity 3.0 a Ptol - performance tolerance +/- 5% Solar cells Sunpower Max Sys Voltage (including by-pass diode) 30V Cable length 1.5 m High shadow tolerance Yes Holes - Note: Always pay attention to the permissible max. System voltage of the solar panel when switching

Flexible and accessible solar modules from Sunbeam system from SwedenThe Swedish solar specialist Sunbeam system develops solar modules according to the latest technology and with a wide range of circles (on board, on the caravan, etc.). All Sunbeam system modules are extremely thin, flexible and accessible. Thanks to the outstanding energy yield, they are perfect for self -sufficient energy generation on the go. The latest generation of particularly powerful and robust solar modulesSunbeam system Tough+ impress with an outstanding Performance per unit of surface and extreme longevity:- Again +13% power ggü. Tough modules - Flush 2.0 cable (still flatter) - Walk -in, non -slip surface - easy installation - 5 year guarantee The outstanding performance levy is safely monitored by Sunbeam system's' partner Sunpower. The cells in oneTough +Panel have an impressive efficiency of an average of 23.7% cell efficiency. This allows an approximately 13% higher performance of the tough + modules compared to comparable modules or the tough modules. Tough + has specially developed materials for the tough series. This enables longevity for light and thin solar modules that have never been seen before. The anti-slip surface is not only practical and safe, but also has a better light output. The dirt -repellent properties help to keep the panel clean and to ensure optimal, self -sufficient power generation.All tough + modules are equipped with the flat flush 2.0 cable. This improved cable is 30% flatter, but still has 25% more copper cross -section than the flush (standard) series. Tough + is designed for a screwless assembly. Together with the new, slim cable, there is a thin surface, ideal for integrating the modules on any surface.Flush 2.0-deck data: 2 meter white UV and corrosion-protected connection line 2.1 mm² preceded fine -wireless copper.All values ​​measured under standard test conditions: 1000W / m2, On 1.5 at 25 degrees CelsiusTemp coefficient for ISC 0.05 (% / ° C) Temp coefficient for VOC -0.27 (% / ° C)Temp coefficient from Pmax -0.38 (% / ° C)All tough + models are delivered with structural adhesive tape for quick assembly on a vaulted surface. For a slowly hardening alternative, we recommend using a soft adhesive. Technical specifications Article designation Tough+ 39 W flush Article no. 1970700 Dimensions 535 x 378 mm Weight 0.7 kg Pmax - max. Performance 39 W VOC - Voltage Open Circuit 23.08 V LSC - short circuit current 2.05 a VMP - Max. System voltage 19.88 V IMP - Max. Electricity 1.95 a Ptol - performance tolerance +/- 3% Solar cells Sunpower 23.70% Max Sys Voltage (including by-pass diode) 30V (80V) Cable length 2 m Fastener No

TheSunbeam system Tough Fold 124.5 W solar module is part of the premium line. The module is equipped with highly efficient SunPower cells (cell efficiency 22.5%). The new Tough Fold series are the most durable and most portable solar modules that you can imagine. As part of the Tough family, the folds have the same robust cell protection. The laminated outside, combined with the soft edges and the stiff core, offer an extraordinary and functional solar module. Since the solar modules are completely laminated, they are completely waterproof and therefore have a very long service life.The folds are folded together thanks to the flat junction box and the one -piece design. But the dimensions are also folded apart due to the high efficiency.Due to the waterproof MC4 plugs, the solar modules can be used universally in combination with other photovoltaic elements. The user -friendly closure of the plugs enables easy separation and connecting. The models up to 65W can be used perfectly with the SUNBEAM System mini-R loader. Scope of delivery: Sunbeam system Tough Fold 124.5 W Article designation Tough Fold 124.5 W Article no. 1970657 Dimensions out 1715 x 420 mm Abmsungen folded together 420 x 285 mm Weight 2.2 kg Pmax - max. Performance 124.5 W VOC - Voltage Open Circuit 24.48 V LSC - short circuit current 6.32 a VMP - Max. System voltage 20.88 V IMP - Max. Electricity 5.97 a Ptol - performance tolerance +/- 3% Solar cells Sunpower Max Sys Voltage (including by-pass diode) 30V Cable length Brief + MC4 High shadow tolerance - Holes 4 x 9 mm Note: Always pay attention to the permissible max. System voltage of the solar panel when switching  

Flexible and accessible solar modules from Sunbeam system from SwedenThe Swedish solar specialist Sunbeam system develops solar modules according to the latest technology and with a wide range of circles (on board, on the caravan, etc.). All Sunbeam system modules are extremely thin, flexible and accessible. Thanks to the outstanding energy yield, they are perfect for self -sufficient energy generation on the go.Sunbeam system Tough + is the absolutely latest solar module technology. They impress with an outstanding performance per unit of surface and extreme durability:- Again +13% power ggü. Tough modules - Flush 2.0 cable (still flatter) - Walk -in, non -slip surface - easy installation - 5 year guarantee The outstanding performance levy is safely monitored by Sunbeam system's' partner Sunpower. The cells in a tough + panel have an impressive efficiency of an average of 23.7% cell efficiency. This allows an approximately 13% higher performance of the tough + modules compared to comparable modules or the tough modules. Sunbeam system carbon quick fixWith the new carbon fiber model, Sunbeam system offers a resistant solar panel that can be attached very quickly and easily on an existing Sprayhood/Bimini. The fabric of a bimini is not stable and stiff enough to carry a normal flexible solar panel over 54W or to fix them sufficiently. In the event of stronger winds, the solar panel could be damaged because it turned too much and the smallest cracks could arise. The integrated carbon fiber stiffening in the new Carbon Quick Fix Fixes this problem and enables the use of large solar modules on a top. The ratio of strength to the weight of carbon fibers is crucial here. The Quick Fix system with the LOXX buttons enables easy assembly on fabrics or other surfaces. So that you can easily remove the solar panel and attach it again. Modern designThe black surface with transparent edges not only looks chic, but also fits the color of all colored biminis. The edges are soft so that the solar panel is better on the fabric. High quality cells from SunPower ™The Carbon Quick Fix builds on the Tough + series and was also reinforced with carbon fiber. The same high -quality cells from SunPower ™ were used as in the Tough+ series. The efficiency is approximately 23.7%. Shadow Optimized - Improved partial shading performanceA partial shading of the solar panel happens more often than you think. Due to the "Shadow Optimzed" technology, there is a lower drop in performance in the case of partial shading. Robust, durable surface - UV-resistantThe Carbon Quick Fix is ​​equipped with the same high-quality materials, which were previously developed by Sunbeam system for the original tough series. The innovative robust surface offers a very long service life. The anti -slip profile captures more light in low sun angles. In addition, the dirt -repellent properties also improve daily production by helping to keep the panels clean when rain.By using high -quality materials, Sunbeam system grants a 5 -year guarantee.  Carbon fiber Velcro stripWe recommend the special carbon fiber Velcro strip to use the carbon model in strong winds or on fast-moving ships. These compensate for the forces on the canvas below with the help of Velcro tapes. Technical specifications Article designation Tough+ Carbon 116W Quick Fix Article no. 1970705 Dimensions 1078 x 554 mm Weight 2.8 kg Pmax - max. Performance 116 W VOC - Voltage Open Circuit 23.07 V LSC - short circuit current 6.15 a VMP - Max. System voltage 19.87 V IMP - Max. Electricity 5.84 a Ptol - performance tolerance +/- 3% Solar cells Sunpower 23.70% Max Sys Voltage (including by-pass diode) 45V (80V) Cable length 2 0.8 m High shadow tolerance Yes Fastener Loxx buttons Note: Always pay attention to the permissible max. System voltage of the solar panel when switching

Flexibles Panel, begehbare Anti-Rutsch Beschichtung, 5 Jahre Garantie, verzinnte 1,5m Zuleitung, Wirkungsgrad >22,5%.     Technische Daten Artikelbezeichnung Tough 21W Long Flush Black Artikel Nr. 1970632 Abmessungen 85 x 14,7 cm Gewicht 0,3 kg Pmax - Max. Leistung 20,8 W Voc - Voltage open circuit 24,48V Lsc - Kurzschlußstrom 1,19A Vmp - Max. Systemspannung 20,88V Ptol - Leistungstoleranz +/- 3% Solarzellen Sunpower Kabellänge 1,5 m Hohe Schattentoleranz Ja Löcher nein Hinweis: Achten Sie bei Reihenschaltung immer auf die zulässige max. Systemspannung des Solarpanels

Zum Auffüllen von Lücken zwischen den Panels. Keine Funktion! Inkl. 3M Klebeband.