Measurement and Display Devices
BPP900450100
Victron Cerbo GX system monitoring
The Cerbo GX Communication Center from Victron Energy (MPN BPP900450100) enables perfect control over your system and maximizes its performance. The latest device of the Victron GX series scores with regard to connectivity and intelligent power supply. Maximizing the system performance has never been so easy.
Easy monitoring and control
With the Cerbo GX you can monitor the charging status of the battery, power consumption, energy generation from PV, generator and network. It is also possible to check tank filling levels and temperature measurements. Simply control the current limitation for country electricity feed, the (automatic) start/stop generator or change any settings to optimize the system. Follow warning messages, carry out diagnostic tests and solve problems from afar.
Properties of the Cerbo GX communication center
Easy control of your system
Flexible connection options
Maximizing your system performance
Uncomplicated assembly
Available connections
4 tank connections
4 temperature connections
3 Ve.direct ports
3 USB ports
4 digital inputs
2 relays
Flexible connection options
The system control by the Cerbo GX communication center is possible regardless of location and time. The device offers three different options for connection. Either via the free Victron Remote Management (VRM) Portal, the Victron Energy GX Touch 50 (5-inch touchscreen display) or via the VictronConnect app via Bluetooth.
Scope of delivery:
Cerbo GX deviceNetwork cable with inline protection and M8 connection eyes for battery or DC collection rail fastening.Ve.can final resistors (2 pieces)Termed blocks for all connections on each side
data sheet
Generally:
Manufacturer part number
BPP900450100
Product
System control display
Manufacturer
Victron Energy
Weight
0.6 kg
EAN
8719076048763
SHU050150050
Victron SmartShunt 500A/50mV battery monitor with Bluetooth
Smart battery monitoring
Victron Energy's SmartShunt 500A (MPN SHU050150050) is an all-in-one battery monitor. It connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, such as state of charge, remaining time, history information and much more. Settings can also be changed easily.
Alternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is required but less wiring and clutter is desired.
Characteristics
Equipped with Bluetooth
Check battery parameters conveniently on your smartphone or tablet
Can be connected to GX device
Additional input for additional monitoring options
uncomplicated installation
Differences to the BMV-712 battery monitor
No programmable visual and audible alarm
No programmable relay
Why is battery monitoring important?
Batteries are used in many areas, in most cases to store energy for later use. However, the battery itself does not display the amount of energy stored.
Battery life depends on many factors. The service life can be shortened by undercharging or overcharging, deep discharging, excessive charging or discharging currents and high ambient temperatures. By monitoring with a battery monitor, the user receives important feedback so that countermeasures can be taken to extend the battery life if necessary.
Scope of delivery:
1x SmartShunt
2x cables with fuse, for '+' connection and starter battery or midpoint connection
You will find the right connection cable for the negative pole at Frenchman Energy here and an automotive cone here at Frenchman Marine here and the KFZ cone here
data sheet
IP protection
IP21
weight
0.4kg
Manufacturer
VictronEnergy
Dimensions (LxWxH)
75x135x85mm
Manufacturer part number
SHU050150050
EAN
8719076044253
1430
Votronic Bluetooth Connector S-BC including Energy Monitor app
The Votronic Energy Monitor consists of a special communication module (Bluetooth Connector S-BC), which in conjunction with a Votronic Solar loader (from 2013) with LCD solar computer S and/or the LCD battery computer S or VPC Jupiter With Smart Shunt, the values that are displayed on the corresponding display also transmit to a mobile device via Bluetooth. The required app for Android or iOS is available free of charge in the Google Play Store or iOS App Store.
The connection of the Bluetooth Connector S-BC is very simple. It is simply stuck using the modular cable in the scope of delivery between the Votronic Solar loader and the LCD solar computer S or between the Smart Shunt and the LCD battery Computer S or VPC Jupiter.
The device has two inputs and outputs each, so that 1 solar controller with LCD solar computer and 1 smart shunt with LCD battery computer or VPC Jupiter can be connected together to a communication module.
In this way, the entire information of the on-board battery, such as voltage, charging or discharge flows and the remaining capacity, as well as all data from the solar system can be easily read via the cell phone or tablet. In addition, the most important data is logged, graphically prepared and are saved for a longer period of time. Even the output as a CSV file for your own analysis purposes is possible. Of course, the Bluetooth Connector S-BC can also be installed at any time.
The Bluetooth Connector S-BC is compatible with the following devices:-Votronic solar loader in SR and MPP technology from 2014 (series number 14VXX.XXXXX)- Battery charger of the type VBCS triple- LCD battery computer S with smart shunt (all versions)- VPC Jupiter with Smart-Shunt (all designs)
Technical specifications
Device type
Bluetooth Connector S-BC
Item No.
1430
Dimensions (BXTXH) in [mm]
75 x 47 x 24
Weight in [g]
37
Test mark
CE, e-test (EMV/car directive)
Ambient conditions, humidity: max. 95% room moisture, not condensing
Scope of delivery: operating instructions, 2x control line 6-pin 1 m long
BPP900455050
Victron Energy GX Touch 50 for Cerbo GX
Victron Touch 50 GX - Perfect monitoring and control
4x tank and temperature connections
3x VE.Direct and USB ports
4x digital inputs
2x relays
Expandable with the GX Touch Display
Maximizes system performance in real time
Perfect monitoring and control
The GX Touch 50 is the display accessory for the Cerbo GX. The 5-inch touchscreen display provides an instant overview of your system and allows you to make settings in no time at all. It simply connects to Cerbo GX with a cable, its super-slim, waterproof design, top-mounting, and easy installation offer plenty of flexibility in creating a crisp and clean dashboard.
The GX Touch 50 is an ideal match for the Cerbo GX - the completely new communication center allows you to always have perfect control of your system from any location and to maximize performance. Simply connect via our Victron Remote Management (VRM) portal or access directly via GX Touch 50, an MFD or our VictronConnect App using Bluetooth capability. This latest member of the GX series combines the best in connectivity, redefining intelligent power solutions in every respect.
Easy to attach
GX Touch is optimized to exceed the standards of professional installers. The screen simply bolts to the top of a dashboard, eliminating the need to create perfect cutouts like the ColorControl GX, and connects via a single cable, eliminating the need to run multiple cables to the dashboard.
You can find more information here.
1250
Votronic LCD solar computer S
Energy and performance measuring device for the solar system
How much energy does my solar system actually deliver? Are the solar modules shaded or dirty or is something wrong? In order to be able to answer these questions, Votronic offers the LCD solar computer S, which is simply connected to the Votronic Solar loader of the SR and MPP series and immediately provides the desired information comprehensively.
The LCD solar computer S can also be subsequently connected to the controller, since the Votronic solar loader controls are already ready for connector and provide the required signals. The connection is therefore extremely simple.
The measured values for better control and use of the solar system are displayed on the display clearly and easy to use. The display is backlit (switchable) and also very easy to read from larger distances and in all light conditions.
In keeping with the votronic module system, the LCD solar computer S is designed as a panel version and is partly accessible to the other display modules both optically and mechanically (uniform height 85 mm). Low front panel dimensions and the particularly low installation depth of only 22 mm allow assembly at almost every point. If the device is not sunk, there is a corresponding one Build -up available in our accessory program. The connection to the solar controller takes place ready for the connector by the supplied 5 m long connection cable, which can be expanded by further 5 m via an extension.
The current version of the LCD solar computer S is compatible with all Votronic solar loader in SR and MPP technology from 2013 (series number 13Vxx.xxxxx).
Also available in boats with the electronics protected from moisture!
Delivery time: 1-3 working days
Technical specifications
Battery native voltage (DC) in [V]
12 and 24
Electricity recording max. In [ma]
3 - 30
Advertisement
LC display with specific segments
Display function
W, A, V, Ah, Wh, Wh
Measuring area in [WP]
20 - 990
Dimensions (WXHXT) in [mm]
80 x 85 x 25
Diabum (WXHXT) in [mm]
66 x 72 x 22
Weight in [g]
55
Test mark
CE, e-test (EMV/car directive)
Ambient conditions, humidity: max. 95% room moisture, not condensing
Scope of delivery: 5 m connection cable, fastening screws, operating instructions, drilling template
BPP900455070
Victron GX Touch 70 display panel for Cerbo GX
The GX Touch 70 Display from Victron Energy (MPN BPP900455070) is the display accessories for the Cerbo GX communication center. The 7-inch touchscreen display offers an immediate overview of your system and allows you to make settings in no time at all. The display is easily connected to Cerbo GX via a cable. Its super -slim, waterproof design and easy installation offer a lot of flexibility.
Properties of the GX Touch 70
7-inch touchscreen display
Immediate system overview
Easy attachment from above
Connection via a cable
The addition to the Cerbo GX
The GX Touch 70 Display is the ideal supplement to optimally use your Cerbo GX communication center. Use the Bluetooth capability directly via GX Touch 70 and optimize your system and make changes easily and quickly.
Scope of delivery:
1x GX Touch 70 Display
1x HDMI USB connection cable
1x assembly material
ASS030543020
Victron GlobalLink 520 (LTE 4G-M to VE.Direct port)
Victron Energy's GlobalLink 520 (MPN ASS030543020) provides you with insight into your installation and is a crucial factor in the maintenance and operation of your off-grid energy solutions.
Global connectivity with 4G LTE-M
LTE-M is the abbreviation for LTE Cat-M1 or Long Term Evolution (4G), category M1. This cellular technology was developed to connect Internet of Things devices to existing 4G towers while consuming little energy. LTE-M supports handover and roaming, making it possible to use this device in a moving vehicle such as an RV. Check our GlobalLink 520 manual to see if LTE-M availability is officially confirmed in your region. Coverage is increasing week by week as local providers offer support. Your purchase includes 5 years of connectivity, so you don't have to worry about buying a separate data package and SIM card.
Easy system monitoring and control
Your GlobalLink 520 comes with two VE.Direct connectors that allow you to connect up to two VE.Direct devices such as a BMV battery monitor or MPPT solar charge controller directly to the VRM. With two digital inputs that also act as a pulse counter and a remotely controllable relay, it is a perfect solution for monitoring and controlling your system.
built-in antenna
The GlobalLink 520 comes with a built-in antenna designed for use around the world. However, if you need better reception or want to install your module in a commercial vehicle, for example, it is also possible to mount an external antenna.
Victron remote management
The Victron Remote Management (VRM) online portal allows you to access your installation from anywhere and at any time. In VRM you can check the status of your connected products, view detailed history graphs of your energy, create detailed analysis reports and even configure automatic alarms in case something goes wrong.
Scope of delivery:
1x Global Link 520
1x 1.5m power cord with in-line fuse holder 1A, M10 spade lugs and power plug
2x plug-in connection terminals
Manufacturer
VictronEnergy
product type 1
connection set
Manufacturer part number
ASS030543020
EAN
8719076053644
Dimensions
122.5 x 67.1 x 23.3mm
1263
Votronic LCD battery computer 100 S with smart shunt and mass band 25
How much remaining load does my on -board battery still have? Is the battery really full? Why is energy being removed from the battery despite the consumer switched off? The Votronic LCD battery computer S answers these questions to the percentage (%) and the amperpower (AH). At the push of a button, it provides comprehensive information about the current loading status of the battery, the flowing battery flows and the voltage position of the battery. Building on the extremely proven Votronic LCD battery computer, the LCD battery computer was created. The versatile, easy-to-use display functions have been expanded by a white illuminated, clear LCD display, which can also be read from a large distance and in the event of unfavorable lighting conditions.
The device is constantly in contact with "its battery" and thus registered and evaluates all battery actions. All loading and discharge flows are meticulously counted, battery sizes, self-discharge, battery load etc. are taken into account using one programmed characteristic fields. The residual capacity of the battery is then calculated from the measured values and the battery size. The result is the correct display of the charging status (the still removable capacity, residual charge) of the on-board battery as a numerical value in ampers hours ("AH") and in percent ("%") as well as as a clear filling level, as with a tank watch. The LCD battery computer S is suitable for all battery types (acid, gel, AGM, lithium adjustable) with 12V and 24V battery voltage.
Of course, the current battery voltage ("V") and the current battery current ("A") are also available. Discharge flows (consumers) are marked by a minus sign. Charging flows are also characterized by a "Charge", legible sign. Regardless of this, there is a further display option for tensioning a second battery, e.g. to monitor the vehicle's starter battery.
The LCD battery computer S has a freely programmable switching output for tax, control and warning purposes, for example, depending on the loading status of the on-board battery (0-100%) of consumers or issuing a warning. Input and output points can be adjusted in % and independently of one another, which enables any switching functions. In addition, these can be oversteered manually at any time by pressing a button.
Application example: Automatic protection of the battery against harmful deep discharge, consumers are switched off exactly according to charging status, e.g. with less than 25% charging status. At the push of a button, an emergency one function is possible to continue to be supplied with consumers. The device can therefore also be used as a remote control battery switch (on/off) with deep discharge protection.
A connected connecting cable connects the display to a robust Precision measurement resistance (smart shunt), which is connected directly to the minus pole of the on-board battery and on which the tensions and currents of the battery are recorded. Here is also the switching exit for connecting signalers or strong switching relays.
In keeping with the Votronic module system, the device is partly visually and mechanically (uniform height 85 mm) to the other display modules and the low installation depth of only 22 mm allows assembly at almost every point.
Important information about the smart shunt:
The selection of the right smart shunt (100 s, 200 s or 400 s) depends exclusively on the maximum permanent load by consumers (a) and not on the overall battery capacity (AH).
Also available in boats with the electronics protected from moisture!
Technical specifications
Device type
Art.-
No.
Measurement
Shunt in
Deliver-
scope
Electricity-
on-
seizure
[Ma]
Electricity
lighting
(Can be switched off)
[Ma]
Battery-
Nennkapaz.
adjustable
[Ah]
Electricity
area
Shunt [a]
Duration/15/7 min.
Weight
Display/shunt
[G]
LCD battery computer 100 S
1263
100 A
8
60
50 - 2000
100 / 150 / 200
55 / 240
LCD battery computer 200 S
1266
200 A
8
60
50 - 2000
200 / 300 / 400
55 / 240
LCD battery computer 400 S
1269
400 a
8
60
100 - 2000
400 / 600 / 800
55 / 245
Battery voltage lead acid/gel/AGM:
12 and 24 V
Battery voltage Lifepo4
12.8-13.2 V / 25.6-26.4 V
Test mark:
CE, e-test (EMV/car directive)
Scope of delivery:
Display unit, Mess-Shunt 100 A, 200 A or 400 A including smart shunt cover,
Connection cable 5m long, mass band, fastening screws, instructions, drilling template
Dimensions (W x H x T):
80 x 85 x 24 mm
Setting up (W x H x T):
66 x 72 x 22 mm
Dimensions Shunt (W x H X T):
135 x 32 x 44 mm
The devices are tailored to the measurement shunts contained in the scope of delivery and cannot be operated or exchanged in conjunction with other measuring shunts!
1248
VOTRONIC LCD Charge Control S-VCC (only for loading converter VCC)
Display unit for the loading booster from the VCC series
The Votronic Lade Booster VCC ensure the optimal and quick load of the supply battery from the alternator while driving. In contrast to the simple separation relay, the charging voltage is raised to the value, which is necessary for the respective battery type for a full load and required by the battery manufacturers. In this way, the full charging current can flow and in a short time invite handsome amounts of electricity into the battery. Long charging lines and losses, as well as voltage fluctuations on the alternator, are cleaned cleanly.
The LCD display and control area specially designed for this loading unit indicates all important device information.
The LCD Charge Control S-VCC is a comfortable, easy-to-use control and operating element, which shows the status of the individual loading sources, the current charging phase, the voltage of on-board and starter battery and the current charging current.
The large, clear display has an illuminated and excellently read display with very low power consumption.
With the plug and play connection, it can be easily retrofitted at any time, even retrospectively, and assembled at almost every point due to the compact design.
The product has the following features:
Compatible with Votronic chargingbooster VCC (1212 series except 1212-25 and 1212-45)
Large, clear display
Light, white illuminated display
Control of the charging function
Display of the battery charging phases
Voltage and charging current display
Delivery time: 1-3 working days
LYN040102100
Victron lynx shunt ve.can
The Lynx Shunt Ve.CAN from VICTRON (MPN Lyn040102100) is an intelligent 1000A shunt (side -end resistor) with a device for a fuse. With the built -in battery lessee, the loading status of the battery can be monitored accurately. Use a GX device (e.g. Cerbo GX) to read out the information. Part of the modular Lynx distribution system.
Properties of the Victron Lynx Shunt Ve.CAN
1000a
Securing CNN 325A / 80V
Integrated battery maker
easy installation
Part of the modular Lynx distribution system
Construction
The Lynx Shunt contains a positive collective rail with space for a CNN security and a negative collective rail with the shunt. It also contains battery monitoring electronics. The Lynx-Shunt can send monitoring information to a CCGX or VGX or a third-party canonbus surveillance system such as an NMEA2000 via the VE.CAN bus battery. The CCGX, VGX or third-party display acts as a battery monitor display and is also used to set up the built-in battery monitor. The Lynx-Shunt is available with a Ve.CAN connection.
Scope of delivery:
1x Victron lynx shunt ve.can
Weight
1.4 kg
Manufacturer
Victron Energy
Dimensions (LXBXH)
190 x 186 x 80.5 mm
Manufacturer part number
Lyn040102100
EAN
8719076022602
PK23-1-S
Simarine Pico One Paket - NEUE Version Silber
PICO one package
The package can monitor a battery bank and display a maximum of 2 displays for tank, voltage or temperatures. The package includes the shunt SC302T: 300A battery bank, 2 input voltages. This allows a battery bank and a tank to be monitored perfectly. The PICO one display cannot be expanded.
Battery monitor PICOone integrated Barometer, display of max.: 1 battery bank and max. 2 displays for tanks, voltages or temperatures.
Including shunt SC303 (300A shunt, 1 battery temperature, 2 voltages 0-75V, 2x resistance sensor 0-65kOhm (temperature or tank), WiFi and free app for Android and iOS. The package cannot be expanded
New version with two additional measuring inputs!
Technical specifications
Operating voltage
6-35V
Power consumption at 12V
Operating, wifi on, 100% illumination
90mA
Operating, wifi off, 70% illumination
35mA
Standby, wifi off, 0% illumination
18mA
Power off, logger still active
5mA
Max number of modules connected
20 (all SIMARINE shunts and modules)
Monitoring capabilities (PICO Display unit only)
Monitoring voltage
12V, 24V
Battery voltage
1
Monitoring capabilities (with SIMARINE shunts and modules)
Monitoring voltage
12V, 24V (SC300, SC500, ST107, SCQ25T)
12V, 24V, 48V, 60V, 72V(SC302T)
Battery banks with Real-Time Battery Health™
6
Battery voltages
6
Independent consumer or generator current channels:
20
Tanks Level or Temperature sensors:
14
Variants from €289.00*
DMC000200010R
Victron Digital Multi Control 200/200a GX (90 RJ45)
The Victron Digital Multi Control Panel (MPN DMC000200010R) is used to remote control of multiplus and quattro interverters It enables the setting of PowerControl and Powerassist electricity limits for two alternating current sources: for example for generator and country power. Settings area: up to 200 A. It can also be used as an on and off switch for the connected devices. The brightness of the LEDs is automatically reduced during the night.The DMC is a remote control panel for the use of all multis/quattros and has been developed by Multi/Quattro systems. This includes individual devices, parallel operation and multi -phase operation.It supports both Ve.bus and not Ve.Bus systems. With DMC, land and generator current can be set separately.When used in an extended Ve.Bus system, up to four different sources of land electricity can be set. In the Ve.Bus system, DMC will automatically choose the setting areas so that you fit the connected system.
Scope of delivery:
1x VICTRON DMC000200010R Digital Multi Control Panel for Multiplus and Quattro devices
1x operating instructions
General data sheet:
Item number:
8-67-009135
Manufacturer part number:
DMC000200010R
Product type:
Control panel with on and off function and adjustment wheel for setting the threshold values for the "Power Assist" and "PowerControl" functions.
Manufacturer:
Victron Energy
EAN:
8719076017011
1266
Votronic LCD battery computer 200 s with smart shunt and mass band 35
How much remaining load does my on -board battery still have? Is the battery really full? Why is energy being removed from the battery despite the consumer switched off? The Votronic LCD battery computer S answers these questions to the percentage (%) and the amperpower (AH). At the push of a button, it provides comprehensive information about the current loading status of the battery, the flowing battery flows and the voltage position of the battery. Building on the extremely proven Votronic LCD battery computer, the LCD battery computer was created. The versatile, easy-to-use display functions have been expanded by a white illuminated, clear LCD display, which can also be read from a large distance and in the event of unfavorable lighting conditions.
The device is constantly in contact with "its battery" and thus registered and evaluates all battery actions. All loading and discharge flows are meticulously counted, battery sizes, self-discharge, battery load etc. are taken into account using one programmed characteristic fields. The residual capacity of the battery is then calculated from the measured values and the battery size. The result is the correct display of the charging status (the still removable capacity, residual charge) of the on-board battery as a numerical value in ampers hours ("AH") and in percent ("%") as well as as a clear filling level, as with a tank watch. The LCD battery computer S is suitable for all battery types (acid, gel, AGM, lithium adjustable) with 12V and 24V battery voltage.
Of course, the current battery voltage ("V") and the current battery current ("A") are also available. Discharge flows (consumers) are marked by a minus sign. Charging flows are also characterized by a "Charge", legible sign. Regardless of this, there is a further display option for tensioning a second battery, e.g. to monitor the vehicle's starter battery.
The LCD battery computer S has a freely programmable switching output for tax, control and warning purposes, for example, depending on the loading status of the on-board battery (0-100%) of consumers or issuing a warning. Input and output points can be adjusted in % and independently of one another, which enables any switching functions. In addition, these can be oversteered manually at any time by pressing a button.
Application example: Automatic protection of the battery against harmful deep discharge, consumers are switched off exactly according to charging status, e.g. with less than 25% charging status. At the push of a button, an emergency one function is possible to continue to be supplied with consumers. The device can therefore also be used as a remote control battery switch (on/off) with deep discharge protection.
A connected connecting cable connects the display to a robust Precision measurement resistance (smart shunt), which is connected directly to the minus pole of the on-board battery and on which the tensions and currents of the battery are recorded. Here is also the switching exit for connecting signalers or strong switching relays.
In keeping with the Votronic module system, the device is bound to the other display modules both optically and mechanically (uniform height 85mm) and the low installation depth of only 22mm allows assembly at almost every point.
Important information about the smart shunt:The selection of the right smart shunt (100 s, 200 s or 400 s) depends exclusively on the maximum permanent load by consumers (a) and not on the overall battery capacity (AH).
Also available in boats with the electronics protected from moisture!
Technical specifications
Device type
Art.-No.
MeasurementShunt inDeliver-scope
Electricity-on-seizure[Ma]
Electricitylighting(Can be switched off)[Ma]
Battery-Nennkapaz.adjustable[Ah]
ElectricityareaShunt [a]Duration/15/7 min.
WeightDisplay/shunt[G]
LCD battery computer 100 S
1263
100 A
8
60
50 - 2000
100 / 150 / 200
55 / 240
LCD battery computer 200 S
1266
200 A
8
60
50 - 2000
200 / 300 / 400
55 / 240
LCD battery computer 400 S
1269
400 a
8
60
100 - 2000
400 / 600 / 800
55 / 245
Battery voltage lead acid/gel/AGM:
12 and 24 V
Battery voltage Lifepo4
12.8-13.2 V / 25.6-26.4 V
Test mark:
CE, e-test (EMV/car directive)
Scope of delivery:
Display unit, Mess-Shunt 100 A, 200 A or 400 A including smart shunt cover,Connection cable 5m long, mass band, fastening screws, instructions, drilling template
Dimensions (W x H x T):
80 x 85 x 24 mm
Setting up (W x H x T):
66 x 72 x 22 mm
Dimensions Shunt (W x H X T):
135 x 32 x 44 mm
The devices are tailored to the measurement shunts contained in the scope of delivery and cannot be operated or exchanged in conjunction with other measuring shunts!
5748
Votronic VPC Jupiter 200
Multi-panel system For motorhomes in 3 different versions
The Votronic Power Control (VPC for short) is an innovative multi-panel system for motorhomes that combines the most important functions and information in one device. The information is shown via a light, white illuminated graphic display. The large -scale values can be read excellently in all lighting conditions, even from a greater distance. Colored light emits signal the selected function at any time. The individual versions differ in their range of functions, which is designed for the specific requirements of the different vehicle types. While the version Jupiter, for example, leaves almost nothing to be desired with regard to energy supply and filling levels, the Mercury execution is particularly recommended for more compact vehicles, which often do not have any fixed tanks.
VPC Terra and Jupiter can also be covered with 3 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank etc.). The individual switch 2xum are suitable for switching, e.g. switch panel 16 a s Art. 1289 or switch panel 2x16 a S Art.-No. 1291
All devices have at least one voltage display for the board and starter battery and a switching exit for an external relay as the main switch. A switch-off alarm provider (beer) on the panel and a note in the advertisement draw attention to this when an adjustable energy threshold has been below and the main switch is automatically switched off in a few seconds to prevent a deep discharge of the battery.
Delivery time: 1-3 working days
The three versions differ in the range of functions as follows:
VPC Terra
-
-
-
-
VPC Merkur
-
-
-
VPC Jupiter
*
-
-
Voltage display in v
the on-board and start battery
With undervoltage protection for the on-board battery
Main counter For the on -board supply
About switching exit
(e.g. over Switch Unit 40 or Switch Unit 100)
* Only vpc jupiter with Smart shunt:
Battery computer for the on-board battery
(including battery voltage Start battery)
Battery voltage on board battery in V
Battery flow in A (+ = load / - = unloading)
Battery capacity in Ah and %
Remaining term in H until the programmed offset threshold is reached
Solar computer for all votronic Solar controller From 2014 and VBCS Triple
Acute solar performance in W
Current solar power in A
Invited solar capacity in Ah
Invited solar energy in kWh
Values Wh/kWh and AH are added, displayed and can be reset to "zero" individually.
Filler display in %
For fresh water and sewage tank
Switch for the Fresh water pump
Max. 16A (potential -free output)
thermometer
Interior and outer thermometer in ° C
Including 1 temperature sensor
Clock
Time in 24-hour format
USB double charging port
5 V / 2.5 a
Thermometer/o'clock
Combined function for indoor and outside temperature in ° C including temperature sensors and time in 24-hour format.
Device type
Art.-
No.
nominal voltage
On -board battery
[V]
Electricity-
recording
[Ma]
Switching current
pump
Max. [A]
Dimensions
(WXHXT)
[mm]
Installation road
[mm]
VPC Terra 1
5741
12 / 24
6 - 60
16
200 x 65 x 28
185 x 57 x 22
VPC Merkur 2
5744
12
6 - 60
-
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 100 3
5747
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 200 3
5748
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 400 3
5749
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
Test mark: CE, e-test (EMV/car directive)
scope of delivery 1:
Fastening screws, connection cable for votronic solar controller or VBCS triple 5m long, instructions
scope of delivery 2:
Fastening screws, connection cable for votronic solar controller or VBCS triple 5m long,
2 temperature sensors (inside & outside), instructions
scope of delivery 3:
Mess-Shunt 100 A, 200 A or 400 A included Smart shunt cover, Fastening screws,
1 connection cable 5m long for Votronic solar controller or VBCS triple and for smart shunt, 2 temperature sensors (inside & outside), instructions
PK23-3-SS
Simarine PICO Blue Paket - Neue Version Silber Aufbaumontage
SIMARINE's innovative PICO BLUE package is the complete battery and tank monitoring solution for discerning yacht and caravan owners with a service battery bank of up to 500 A at 12 V, 24 V, 48 V, 60 V and 72 V, up to four engine/ spare battery banks and up to 4 tanks.
Precise monitoring of solar modules, wind and hydroelectric generators, shore power chargers or the power consumption of individual consumers such as refrigerators is also possible. A great tool for detecting malfunctions in generators and other equipment.
Battery monitor PICO with aluminum frame, WiFi and free app for Android and iOS.
Scope of delivery:
1 x PICO with integr. barometer
1 x SC503 (500A shunt, 1 battery temperature, 2 voltages 0-75V, 2x resistance sensor 0-65kOhm (temperature or tank))
1 x ST107 Tank Module (3 voltage inputs, 4 resistance inputs, 1 relay output)
1 x SCQ25 4-fold shunt 25A (4 inputs for consumers or generators)
Technical specifications
Monitor:
Operating Voltage: 6V - 35V
Power consumption at 12V:
operational, WiFi on, 100% backlight: 90 mA
operational, WiFi off, 70% Backlight: 35 mA
Standby, WiFi off, 0% Backlight: 18mA
Off, only data logger active: 5 mA
Monitoring options with standard scope of delivery:
Voltage monitor: 12V, 24V, 48V, 60V, 72V
1 battery bank with real-time battery health
4 tanks
4 current measuring points
Monitoring options with optional modules:
Voltage monitor: 12V, 24V, 48V, 60V, 72V
6 battery banks with real-time battery health
14 tanks
14 temperature sensors
20 shunts for current measurement
Dimensions display module: 97.5 x 83mm
Shunt SC501:
Operating Voltage: 6V - 35V
Temperature range: -20 - 70°C
Power consumption at 12V:
in operation 0.8mA
current measurement:
Measuring range: 0.02 - 600A
resilience:
Duration: 500A
Peak (<60s) 800A
Accuracy +/- 0.6%
Resolution: 0.02A
Sample speed: 100ms
Voltage measurement:
Measuring range: 0-75V
Accuracy: +/-0.2%
Resolution: 1mV
Temperature measurement:
Range: -15 - 80°C
Accuracy (-10 - 60°C) 3%
Dimensions:
Size: 118x40x52mm
Battery connectors: M10
Connection options: 1 battery bank
Tank module ST107:
Operating Voltage: 6V - 35V
Temperature range: -20 - +70°C
Power consumption at 12V:
in operation 2.5mA
Voltage measurement:
Measuring range: 0-35V
Accuracy: +/-0.2%
Resolution: 1mV
Resistance inputs:
Range: 10 ohms - 65k ohms
Accuracy +/-0.1%
Dimensions:
Size: 112x72x31mm
Power module SCQ25:
Operating Voltage: 6V - 35V
Temperature range: -20 - +70°C
Power consumption at 12V:
in operation 2.5mA
current measurement:
Measuring range: 0.01 - 25A
resilience:
Duration: 25A
Peak (<60s) 35A
Accuracy +/- 0.6%
Resolution: 0.01A
Sample speed: 100ms
Dimensions:
Size: 183x91x34mm
5330
Votronic 5330 Info Panel Pro
Combined tank and battery monitoring
The Votronic Info Panel has proven itself excellently since its market launch and has now been expanded in its functions. It is particularly popular because it takes over the most important control and switching tasks in the motorhome, in a particularly compact form. It monitors both the fresh water, sewage and fecal tanks as well as the on-board and start battery. It also has a main switch for the on-board battery and a pump main switch for fresh water supply. Both of course with switch -on control.
The voltage display on the left side of the Info Panel Pro is used to monitor the on-board and starter battery. The illuminated dot display provides a fairly precise display of the battery tensions, since intermediate values can also be read well due to different light -bearing neighboring lighting points. The board or starter battery voltage is selected or the display is switched off. With low battery tensions, red ads are pointed out to the soon due recharging of the battery.
The filling heights of the tanks are presented as clear luminous beams with 10 luminous diodes each in three colors, which allows the exact recording of the tank filling levels at a glance. The ads work continuously because intermediate stands with variable brightness are shown and tendencies can therefore be recognized immediately. When the containers are understood and reduced, the steadily increasing or falling display provides the user the direct image of the current level and thus enables the process to be fully checked. The permanent operation of the display also contributes to this. The display can be switched on and off at the push of a button or switches off automatically after about 10 minutes. The fuel gauge on the right side of the Info Panel Pro can also be switched to two measurement inputs (e.g. wastewater and fecal tank) as standard. To select one of the Votronic tankers after tank, tank height and assembly option on the tank for each used fuel gauge and tank. Fuel ads that are not required (e.g. faecal) are simply released.
The Info Panel Pro is protected against false polishing and overload. The connections are easily accessible and are shown on the labeled back above 6.3 mm flat plugs (power connections) and screw terminals (signal connections).
Detailed installation and operating instructions as well as drilling template for the furniture section are included. The particularly low installation depth of only 15 mm allows the assembly at almost every point, there can be continued use of storage space behind it. When switched off, the device and all tankers are completely powerless.
The individual fuel ads of the Info Panel Pro can also be covered with 2 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank etc.). The individual switch 2xum are suitable for switching, e.g. switch panel 16 a s Art. 1289 or switch panel 2x16 a S Art.-No. 1291
Previous measurement value buyers, tank providers and tank probes, which work according to the conductive measurement method (conductivity), are no longer suitable due to the 7-stage measurement and for continuous operation on the info panel pro.
Delivery time: 1-3 working days
Also available in boats with the electronics protected from moisture!
Technical specifications
Device type
Art.-
No.
Electricity-
recording
[Ma]
Switching current
Hauptsch.
Max. [A]
Switching current
pump
Max. [A]
Weight
[G]
Dimensions
(WXHXT)
[mm]
Installation road
[mm]
Info Panel Pro
5330
0 - 50
16
10
90
200 x 55 x 18
175 x 42 x 12
Test mark: CE, e-test (EMV/car directive)
Scope of delivery: flat plug, fastening screws, operating instructions, drilling template
SC503
Simarine SC503 Shunt 500A for Pico Battery Later New version
Innovative combination of side resistance and tank filling module.
SC503 is a high-precision combination co-resistance for the battery maker Pico with 2 voltage sensors, 2 temperature sensors, 1x Socet for temperature sensor with JST connector and 1 current sensor for up to 500 A for systems with up to 75 V.
It can be used to monitor the power consumption of large consumers (inverter, bow and rear beam rudder, anchor winches) and electricity generators (country power charging devices and solar modules). In addition, it enables the monitoring of tanks for fuel, fresh water and gray water.
Operating
Voltage range
6 - 35 V
TemPartature range
-20 -+70 ° C
Power Consumption AT 12 V
Operating
1.2 MA
Current Measuring Range
Channel
0.01 - 700 a
Accuracy
± 0,6 %
resolution
0.01 a
Sampling rate
100 ms
Maximum current
Continuous
500 a
Peak Current (<1 min)
700 a
Peak Current (<5 min)
1000 A
Voltage Drop AT 300 A
50 mv
Maximum voltage on Connections
35 V
Voltage inputs
Range
0 - 75 V
resolution
1 mv
Accuracy
± 0,2 %
Sampling rate
100 ms
Resistance inputs
Range
0 Ohm - 65 Kohm
Accuracy
± 3,0%
TemPartature sensor - NTC 10K
Range
-15 -+80 ° C
Accuracy (-10-60 ° C, 14-140 ° F)
± 3,0%
Connectivity
Up to
Batteries
1
TemPartature sensors
3
Voltage sensors
2
Sicom RJ9 Sockets
2
Installation and dimension
Dimensions (Langth X Width X Depth)
120 x 120 x 60 mm
Battery Connection
M 10 Bolts
1440
Votronic Solar Data Extender 3n1
Availability: immediately available
Delivery time: 1-3 working days
The solar data extender summarizes the data of up to three solar regulators so that they can be displayed on a single display. The usual LCD display can still be used. It is compatible with the following devices:
Solar loader in SR and MPP technology (from series no. 14Vxx.xxxxx)
Battery Charger of Type VBCS Triple
LCD solar computer S (from series no. 15V40.xxxxx)
LCD Charge Control S
VPC series with solar function
Bluetooth Connector S-BC
Assembly and connection
The solar data extender can be installed at any time. It has three independent inputs (IN1, IN2, IN3). The signals are summarized by the output (out). A solar display (e.g. LCD solar computer S) can be connected there.
It is stuck using the modular cable in the scope of delivery between Votronic Solar loader and the solar display (e.g. LCD solar computer S). The connection in1 must always be connected, since the voltage supply for the device takes place via this.
Also available in boats with the electronics protected from moisture!?
Technical specifications
Nominal voltage (supply via connected devices)
12 and 24
Operating voltage area [V]
8 - 32
Electricity intake in standby, typical [MA]
0,7
Electricity with activity, typical [MA}
10
Dimensions (WXHXT) in [mm]
75 x 47 x 24
Weight in [g]
37
Test mark
CE, e-test (EMV/car directive)
Environmental conditions, humidity:
Max. 95% room moisture, not condensing
Scope of delivery:
3 St. control line 6-pin 0.5 m long, operating instructions
BAM030712000
Victron Battery Monitor BMV-712 Smart
Victron BMV 712 Smart Battery Monitor
Precise monitoring:The main task of battery monitoring is to monitor the battery's state of charging in order to display unexpected complete discharges. For this purpose, the current flow is measured continuously and the current battery charging status is recorded. An alarm can be triggered when a set threshold value is reached. The ampère hours are determined by integrating the current flow into or from the battery. With constant current, the integration of the multiplication of electricity and time corresponds. For example, a discharge current of 10a over 2 hours results. a value of 20Ah. Victron battery guards are equipped with powerful, programmed microprocessors. In addition, it is equipped with an integrated Bluetooth module that allows you to access many functions and status reports of the battery computer via a free app.
Characteristics:
Numerous functions for battery monitoring and generously dimensioned electronics components on the Smart BMV board allow you insight into the life of your battery. In addition, with the help of the BMV, you can recognize and fix problems with the help of the BMV, even in larger batteries before damage.
- Programmable visual and acoustic alarm- Programmable relays to switch off the insignificant loads or switch on a generator if necessary.-A 500 amper rapid connection shunt and a connection set.- Shunt capacity of up to 10,000 amps can be selected- Ve.direct Communication connection, which can transmit a wide range of course data in order to be able to evaluate usage patterns and battery status- Additional input for the voltage measurement of a second battery, temperature or center voltage as well as associated alarm and relay settings- High -resolution measurement data of up to 2 batteries- Monitoring of the center
A damaged cell or a damaged battery can destroy a whole battery. If batteries are switched into series, a timely warning message can be created by measuring the center voltage. -The power consumption of the BMV is only 0.7 AH per month (1 ma) at 12 V and 0.6 AH per month (0.8 MA) at 24 V. In particular, lithium-ion batteries have almost no capacity, if you are discharged until switching off due to low voltage.
After switching off due to low voltage, the capacity reserve of a lithium-ion battery is around 1 AH per 1000 AH battery capacity. The battery is damaged when the remaining reserve capacity is removed from the battery. A residual current of 10 mA, for example, can damage a 200 AH battery if the system is left in the unloaded state for over 8 days.- Integrated Bluetooth: Networking, evaluation and configuration have never been as comfortable as today
- Free app VictronConnect: The VictronConnect App enables you to evaluate all Victron products with VE.Direct interface. Depending on the device, numerous parameters can be evaluated directly via the cell phone, computer or tablet. There are also opportunities for datalogging and data export.Wide input voltage area: 6.5 - 70VHigh current measuring resolution 10 MA (0.01 a)Electricity ± 0.01aVoltage ± 0.01 VAmperer hour ± 0.1 AhCharging status (0 - 100%) ± 0.1%Remaining term ± 1 minTemperature (0 - 50 ° C or 30 - 120 ° F) ± 1 ° C/° FAccuracy of the current measurement ± 0.4%Simplest installation:All electrical connections are carried out with the circuit board connector on the Strom-Shunt. The shunt is connected to the guard via a standard RJ12 telephone cable.
Scope of delivery:-Victron BMV Smart 712, battery monitor- Shunt 500 A / 50 MV-10 meters 6 ADDRITE UTP cable with RJ12 plugs, and cable with fuse for the ‘+’ connection- Safety ring for a back assembly and screws for a front-side assembly
BPP900400100
Victron Venus GX System Monitoring BPP900400100
The Victron Energy Venus GX System Control module (MPN BPP900400100) offers intuitive operation and monitoring of all power systems based on Victron components.
It is particularly suitable as a heart in an ESS (Energy Storage System).
VOM Functional scope of the Venus GX resembles the Color Control GX from Victron, only without a display and without installed modem. It transfers all system data to the free VRM portal of Victron, from where you can monitor and administration your electricity system worldwide.
In addition to the power electronics, tank filling levels of up to 3 tanks can also be monitored and visualized in the VRM portal. In addition to remote monitoring of the shot devices, configuration is also possible from a distance.
Remote Console on the VRM
The setup and the monitoring take place via the remote console. Either via the VRM, via the built -in WiFi access point or via the local LAN/WIFI network.
Automatic aggregate start/stop
An extremely flexible start/stop system. Use of loading, voltage, load and other parameters. Certain settings for rest periods and an optional monthly test run can be set.
Internet connection
The Venus GX can be connected to an Ethernet cable and via Wi-Fi to the Internet. The Venus GX has no internal mobile phone modem: there is no slot for a SIM card. Instead, use a standard GPRS or 3 g router.
Inputs of the tank level indicator
The inputs for the tank level indicator are resistant: connect them to a resistant tank transmitter. Such tank transmitters are not offered by Victron. The ports of the tank level indicator can be configured in such a way that you can work with European tank channels (0-180 ohms), or with US tank channels (240-30 ohms).
Data recording
If the system is connected to the Internet, all data is sent to the VRM portal. If no internet connection is available, the Venus GX stores the data for up to 48 hours internally. By inserting a micro SD card or a USB stick, even more data can be saved. These files can be uploaded to the VRM portal or converted offline with the VictronConnect app for analysis.
More highlights
Venus GX can automatically update itself on the Internet if a new software version is available.
Several languages: English, Czech, German, Spanish, French, Italian, Dutch, Russian, Swedish, Turkish, Chinese, Arabic.
Use the Venus GX as a Modbus TCP Gateway to all connected Victron products.
Linux OS based operating system
Supported products
Multis and quattros, including the gap phase and three-phase systems. Monitoring and control (on/off and electricity limiter). A change in the configuration is possible (only from afar via the Internet, not without an internet connection).
Bluesolar Mppt Solar chargers with a Ve.direct port.
Bluesolar Mppt 150/70 and the Mppt 150/85 with Ve.can port. If several blues solar MPPTs with Ve.CAN are used in parallel circuit, all information is combined in one.
Devices of the BMV-700 family can be connected directly to the VE.Direct ports on Venus GX. Use the VE.Direct cable.
Devices of the BMV-600 family can be connected to the VE.Direct ports on Venus GX. An additional cable is required.
Lynx ion + shunt
Lynx ion bms
Lynx shunt ve.can
Skylla-i battery charger
Nmea2000 fuel sensors
A USB GPS can be connected to the USB port. The data is sent to the VRM portal for traceability. The latest position is then displayed on the map on the VRM.
Fronius PV inverter
scope of delivery:
1x Victron BPP900400100 Venus GX System Control module
1x operating instructions
data sheet
Generally:
Manufacturer part number
BPP900400100
Product
Central system monitoring unit
Manufacturer
Victron Energy
Ambient temperature
-20c- +50c
Dimensions (LXBXH)
45 x 143 x 96 mm
Weight
0.254 kg
EAN
8719076037897
SC303
Simarine SC303 Shunt 300A for Pico Battery Lighter New version
Innovative combination of side resistance and tank filling module.
SC303 is an active combination-by-fabric resistance for the battery tenants Pico and Pico One with 2 voltage sensors, 2 tank filling stand or temperature sensors, 1x Socet for temperature sensor with JSt connector and 1 current sensor for up to 300 A for systems with up to 75 V.
It can be used to monitor the power consumption of large consumers (inverter, bow and rear beam rudder, anchor winches) and electricity generators (country power charging devices and solar modules). In addition, it enables the monitoring of tanks for fuel, fresh water and gray water.
Operating
Power Source Voltage Range
6 - 35 V
TemPartature range
-20 -+70 ° C
Power Consumption AT 12 V
Operating
0.8 MA
Current Measuring Range
Channel
0.1 - 320 a
Accuracy
± 0,6 %
resolution
0.01 a
Sampling rate
100 ms
Maximum current
Continuous
300 a
Peak Current (<1 min)
400 a
Peak Current (<5 min)
700 a
Voltage Drop AT 300 A
50 mv
Maximum voltage on Connections
35 V
Voltage inputs
Range
0 - 75 V
resolution
1 mv
Accuracy
± 0,2 %
Sampling rate
100 ms
Resistance inputs
Range
0 Ohm - 65 Kohm
Accuracy
± 3,0%
TemPartature sensor - NTC 10K
Range
-15 -+80 ° C
Accuracy (-10-60 ° C, 14-140 ° F)
± 3,0%
Connectivity
Up to
Batteries
1
TemPartature sensors
3
Voltage sensors
2
Sicom RJ9 Sockets
2
Installation and dimension
Dimensions (Langth X Width X Depth)
120 x 120 x 60 mm
Battery Connection
M 10 Bolts