Battery Monitoring
SHU050150050
Victron SmartShunt 500A/50mV battery monitor with Bluetooth
Smart battery monitoring
Victron Energy's SmartShunt 500A (MPN SHU050150050) is an all-in-one battery monitor. It connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, such as state of charge, remaining time, history information and much more. Settings can also be changed easily.
Alternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is required but less wiring and clutter is desired.
Characteristics
Equipped with Bluetooth
Check battery parameters conveniently on your smartphone or tablet
Can be connected to GX device
Additional input for additional monitoring options
uncomplicated installation
Differences to the BMV-712 battery monitor
No programmable visual and audible alarm
No programmable relay
Why is battery monitoring important?
Batteries are used in many areas, in most cases to store energy for later use. However, the battery itself does not display the amount of energy stored.
Battery life depends on many factors. The service life can be shortened by undercharging or overcharging, deep discharging, excessive charging or discharging currents and high ambient temperatures. By monitoring with a battery monitor, the user receives important feedback so that countermeasures can be taken to extend the battery life if necessary.
Scope of delivery:
1x SmartShunt
2x cables with fuse, for '+' connection and starter battery or midpoint connection
You will find the right connection cable for the negative pole at Frenchman Energy here and an automotive cone here at Frenchman Marine here and the KFZ cone here
data sheet
IP protection
IP21
weight
0.4kg
Manufacturer
VictronEnergy
Dimensions (LxWxH)
75x135x85mm
Manufacturer part number
SHU050150050
EAN
8719076044253
1263
Votronic LCD battery computer 100 S with smart shunt and mass band 25
How much remaining load does my on -board battery still have? Is the battery really full? Why is energy being removed from the battery despite the consumer switched off? The Votronic LCD battery computer S answers these questions to the percentage (%) and the amperpower (AH). At the push of a button, it provides comprehensive information about the current loading status of the battery, the flowing battery flows and the voltage position of the battery. Building on the extremely proven Votronic LCD battery computer, the LCD battery computer was created. The versatile, easy-to-use display functions have been expanded by a white illuminated, clear LCD display, which can also be read from a large distance and in the event of unfavorable lighting conditions.
The device is constantly in contact with "its battery" and thus registered and evaluates all battery actions. All loading and discharge flows are meticulously counted, battery sizes, self-discharge, battery load etc. are taken into account using one programmed characteristic fields. The residual capacity of the battery is then calculated from the measured values and the battery size. The result is the correct display of the charging status (the still removable capacity, residual charge) of the on-board battery as a numerical value in ampers hours ("AH") and in percent ("%") as well as as a clear filling level, as with a tank watch. The LCD battery computer S is suitable for all battery types (acid, gel, AGM, lithium adjustable) with 12V and 24V battery voltage.
Of course, the current battery voltage ("V") and the current battery current ("A") are also available. Discharge flows (consumers) are marked by a minus sign. Charging flows are also characterized by a "Charge", legible sign. Regardless of this, there is a further display option for tensioning a second battery, e.g. to monitor the vehicle's starter battery.
The LCD battery computer S has a freely programmable switching output for tax, control and warning purposes, for example, depending on the loading status of the on-board battery (0-100%) of consumers or issuing a warning. Input and output points can be adjusted in % and independently of one another, which enables any switching functions. In addition, these can be oversteered manually at any time by pressing a button.
Application example: Automatic protection of the battery against harmful deep discharge, consumers are switched off exactly according to charging status, e.g. with less than 25% charging status. At the push of a button, an emergency one function is possible to continue to be supplied with consumers. The device can therefore also be used as a remote control battery switch (on/off) with deep discharge protection.
A connected connecting cable connects the display to a robust Precision measurement resistance (smart shunt), which is connected directly to the minus pole of the on-board battery and on which the tensions and currents of the battery are recorded. Here is also the switching exit for connecting signalers or strong switching relays.
In keeping with the Votronic module system, the device is partly visually and mechanically (uniform height 85 mm) to the other display modules and the low installation depth of only 22 mm allows assembly at almost every point.
Important information about the smart shunt:
The selection of the right smart shunt (100 s, 200 s or 400 s) depends exclusively on the maximum permanent load by consumers (a) and not on the overall battery capacity (AH).
Also available in boats with the electronics protected from moisture!
Technical specifications
Device type
Art.-
No.
Measurement
Shunt in
Deliver-
scope
Electricity-
on-
seizure
[Ma]
Electricity
lighting
(Can be switched off)
[Ma]
Battery-
Nennkapaz.
adjustable
[Ah]
Electricity
area
Shunt [a]
Duration/15/7 min.
Weight
Display/shunt
[G]
LCD battery computer 100 S
1263
100 A
8
60
50 - 2000
100 / 150 / 200
55 / 240
LCD battery computer 200 S
1266
200 A
8
60
50 - 2000
200 / 300 / 400
55 / 240
LCD battery computer 400 S
1269
400 a
8
60
100 - 2000
400 / 600 / 800
55 / 245
Battery voltage lead acid/gel/AGM:
12 and 24 V
Battery voltage Lifepo4
12.8-13.2 V / 25.6-26.4 V
Test mark:
CE, e-test (EMV/car directive)
Scope of delivery:
Display unit, Mess-Shunt 100 A, 200 A or 400 A including smart shunt cover,
Connection cable 5m long, mass band, fastening screws, instructions, drilling template
Dimensions (W x H x T):
80 x 85 x 24 mm
Setting up (W x H x T):
66 x 72 x 22 mm
Dimensions Shunt (W x H X T):
135 x 32 x 44 mm
The devices are tailored to the measurement shunts contained in the scope of delivery and cannot be operated or exchanged in conjunction with other measuring shunts!
PK23-1-S
Simarine Pico One Paket - NEUE Version Silber
PICO one package
The package can monitor a battery bank and display a maximum of 2 displays for tank, voltage or temperatures. The package includes the shunt SC302T: 300A battery bank, 2 input voltages. This allows a battery bank and a tank to be monitored perfectly. The PICO one display cannot be expanded.
Battery monitor PICOone integrated Barometer, display of max.: 1 battery bank and max. 2 displays for tanks, voltages or temperatures.
Including shunt SC303 (300A shunt, 1 battery temperature, 2 voltages 0-75V, 2x resistance sensor 0-65kOhm (temperature or tank), WiFi and free app for Android and iOS. The package cannot be expanded
New version with two additional measuring inputs!
Technical specifications
Operating voltage
6-35V
Power consumption at 12V
Operating, wifi on, 100% illumination
90mA
Operating, wifi off, 70% illumination
35mA
Standby, wifi off, 0% illumination
18mA
Power off, logger still active
5mA
Max number of modules connected
20 (all SIMARINE shunts and modules)
Monitoring capabilities (PICO Display unit only)
Monitoring voltage
12V, 24V
Battery voltage
1
Monitoring capabilities (with SIMARINE shunts and modules)
Monitoring voltage
12V, 24V (SC300, SC500, ST107, SCQ25T)
12V, 24V, 48V, 60V, 72V(SC302T)
Battery banks with Real-Time Battery Health™
6
Battery voltages
6
Independent consumer or generator current channels:
20
Tanks Level or Temperature sensors:
14
Variants from €289.00*
1266
Votronic LCD battery computer 200 s with smart shunt and mass band 35
How much remaining load does my on -board battery still have? Is the battery really full? Why is energy being removed from the battery despite the consumer switched off? The Votronic LCD battery computer S answers these questions to the percentage (%) and the amperpower (AH). At the push of a button, it provides comprehensive information about the current loading status of the battery, the flowing battery flows and the voltage position of the battery. Building on the extremely proven Votronic LCD battery computer, the LCD battery computer was created. The versatile, easy-to-use display functions have been expanded by a white illuminated, clear LCD display, which can also be read from a large distance and in the event of unfavorable lighting conditions.
The device is constantly in contact with "its battery" and thus registered and evaluates all battery actions. All loading and discharge flows are meticulously counted, battery sizes, self-discharge, battery load etc. are taken into account using one programmed characteristic fields. The residual capacity of the battery is then calculated from the measured values and the battery size. The result is the correct display of the charging status (the still removable capacity, residual charge) of the on-board battery as a numerical value in ampers hours ("AH") and in percent ("%") as well as as a clear filling level, as with a tank watch. The LCD battery computer S is suitable for all battery types (acid, gel, AGM, lithium adjustable) with 12V and 24V battery voltage.
Of course, the current battery voltage ("V") and the current battery current ("A") are also available. Discharge flows (consumers) are marked by a minus sign. Charging flows are also characterized by a "Charge", legible sign. Regardless of this, there is a further display option for tensioning a second battery, e.g. to monitor the vehicle's starter battery.
The LCD battery computer S has a freely programmable switching output for tax, control and warning purposes, for example, depending on the loading status of the on-board battery (0-100%) of consumers or issuing a warning. Input and output points can be adjusted in % and independently of one another, which enables any switching functions. In addition, these can be oversteered manually at any time by pressing a button.
Application example: Automatic protection of the battery against harmful deep discharge, consumers are switched off exactly according to charging status, e.g. with less than 25% charging status. At the push of a button, an emergency one function is possible to continue to be supplied with consumers. The device can therefore also be used as a remote control battery switch (on/off) with deep discharge protection.
A connected connecting cable connects the display to a robust Precision measurement resistance (smart shunt), which is connected directly to the minus pole of the on-board battery and on which the tensions and currents of the battery are recorded. Here is also the switching exit for connecting signalers or strong switching relays.
In keeping with the Votronic module system, the device is bound to the other display modules both optically and mechanically (uniform height 85mm) and the low installation depth of only 22mm allows assembly at almost every point.
Important information about the smart shunt:The selection of the right smart shunt (100 s, 200 s or 400 s) depends exclusively on the maximum permanent load by consumers (a) and not on the overall battery capacity (AH).
Also available in boats with the electronics protected from moisture!
Technical specifications
Device type
Art.-No.
MeasurementShunt inDeliver-scope
Electricity-on-seizure[Ma]
Electricitylighting(Can be switched off)[Ma]
Battery-Nennkapaz.adjustable[Ah]
ElectricityareaShunt [a]Duration/15/7 min.
WeightDisplay/shunt[G]
LCD battery computer 100 S
1263
100 A
8
60
50 - 2000
100 / 150 / 200
55 / 240
LCD battery computer 200 S
1266
200 A
8
60
50 - 2000
200 / 300 / 400
55 / 240
LCD battery computer 400 S
1269
400 a
8
60
100 - 2000
400 / 600 / 800
55 / 245
Battery voltage lead acid/gel/AGM:
12 and 24 V
Battery voltage Lifepo4
12.8-13.2 V / 25.6-26.4 V
Test mark:
CE, e-test (EMV/car directive)
Scope of delivery:
Display unit, Mess-Shunt 100 A, 200 A or 400 A including smart shunt cover,Connection cable 5m long, mass band, fastening screws, instructions, drilling template
Dimensions (W x H x T):
80 x 85 x 24 mm
Setting up (W x H x T):
66 x 72 x 22 mm
Dimensions Shunt (W x H X T):
135 x 32 x 44 mm
The devices are tailored to the measurement shunts contained in the scope of delivery and cannot be operated or exchanged in conjunction with other measuring shunts!
5748
Votronic VPC Jupiter 200
Multi-panel system For motorhomes in 3 different versions
The Votronic Power Control (VPC for short) is an innovative multi-panel system for motorhomes that combines the most important functions and information in one device. The information is shown via a light, white illuminated graphic display. The large -scale values can be read excellently in all lighting conditions, even from a greater distance. Colored light emits signal the selected function at any time. The individual versions differ in their range of functions, which is designed for the specific requirements of the different vehicle types. While the version Jupiter, for example, leaves almost nothing to be desired with regard to energy supply and filling levels, the Mercury execution is particularly recommended for more compact vehicles, which often do not have any fixed tanks.
VPC Terra and Jupiter can also be covered with 3 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank etc.). The individual switch 2xum are suitable for switching, e.g. switch panel 16 a s Art. 1289 or switch panel 2x16 a S Art.-No. 1291
All devices have at least one voltage display for the board and starter battery and a switching exit for an external relay as the main switch. A switch-off alarm provider (beer) on the panel and a note in the advertisement draw attention to this when an adjustable energy threshold has been below and the main switch is automatically switched off in a few seconds to prevent a deep discharge of the battery.
Delivery time: 1-3 working days
The three versions differ in the range of functions as follows:
VPC Terra
-
-
-
-
VPC Merkur
-
-
-
VPC Jupiter
*
-
-
Voltage display in v
the on-board and start battery
With undervoltage protection for the on-board battery
Main counter For the on -board supply
About switching exit
(e.g. over Switch Unit 40 or Switch Unit 100)
* Only vpc jupiter with Smart shunt:
Battery computer for the on-board battery
(including battery voltage Start battery)
Battery voltage on board battery in V
Battery flow in A (+ = load / - = unloading)
Battery capacity in Ah and %
Remaining term in H until the programmed offset threshold is reached
Solar computer for all votronic Solar controller From 2014 and VBCS Triple
Acute solar performance in W
Current solar power in A
Invited solar capacity in Ah
Invited solar energy in kWh
Values Wh/kWh and AH are added, displayed and can be reset to "zero" individually.
Filler display in %
For fresh water and sewage tank
Switch for the Fresh water pump
Max. 16A (potential -free output)
thermometer
Interior and outer thermometer in ° C
Including 1 temperature sensor
Clock
Time in 24-hour format
USB double charging port
5 V / 2.5 a
Thermometer/o'clock
Combined function for indoor and outside temperature in ° C including temperature sensors and time in 24-hour format.
Device type
Art.-
No.
nominal voltage
On -board battery
[V]
Electricity-
recording
[Ma]
Switching current
pump
Max. [A]
Dimensions
(WXHXT)
[mm]
Installation road
[mm]
VPC Terra 1
5741
12 / 24
6 - 60
16
200 x 65 x 28
185 x 57 x 22
VPC Merkur 2
5744
12
6 - 60
-
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 100 3
5747
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 200 3
5748
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 400 3
5749
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
Test mark: CE, e-test (EMV/car directive)
scope of delivery 1:
Fastening screws, connection cable for votronic solar controller or VBCS triple 5m long, instructions
scope of delivery 2:
Fastening screws, connection cable for votronic solar controller or VBCS triple 5m long,
2 temperature sensors (inside & outside), instructions
scope of delivery 3:
Mess-Shunt 100 A, 200 A or 400 A included Smart shunt cover, Fastening screws,
1 connection cable 5m long for Votronic solar controller or VBCS triple and for smart shunt, 2 temperature sensors (inside & outside), instructions
PK23-3-SS
Simarine PICO Blue Paket - Neue Version Silber Aufbaumontage
SIMARINE's innovative PICO BLUE package is the complete battery and tank monitoring solution for discerning yacht and caravan owners with a service battery bank of up to 500 A at 12 V, 24 V, 48 V, 60 V and 72 V, up to four engine/ spare battery banks and up to 4 tanks.
Precise monitoring of solar modules, wind and hydroelectric generators, shore power chargers or the power consumption of individual consumers such as refrigerators is also possible. A great tool for detecting malfunctions in generators and other equipment.
Battery monitor PICO with aluminum frame, WiFi and free app for Android and iOS.
Scope of delivery:
1 x PICO with integr. barometer
1 x SC503 (500A shunt, 1 battery temperature, 2 voltages 0-75V, 2x resistance sensor 0-65kOhm (temperature or tank))
1 x ST107 Tank Module (3 voltage inputs, 4 resistance inputs, 1 relay output)
1 x SCQ25 4-fold shunt 25A (4 inputs for consumers or generators)
Technical specifications
Monitor:
Operating Voltage: 6V - 35V
Power consumption at 12V:
operational, WiFi on, 100% backlight: 90 mA
operational, WiFi off, 70% Backlight: 35 mA
Standby, WiFi off, 0% Backlight: 18mA
Off, only data logger active: 5 mA
Monitoring options with standard scope of delivery:
Voltage monitor: 12V, 24V, 48V, 60V, 72V
1 battery bank with real-time battery health
4 tanks
4 current measuring points
Monitoring options with optional modules:
Voltage monitor: 12V, 24V, 48V, 60V, 72V
6 battery banks with real-time battery health
14 tanks
14 temperature sensors
20 shunts for current measurement
Dimensions display module: 97.5 x 83mm
Shunt SC501:
Operating Voltage: 6V - 35V
Temperature range: -20 - 70°C
Power consumption at 12V:
in operation 0.8mA
current measurement:
Measuring range: 0.02 - 600A
resilience:
Duration: 500A
Peak (<60s) 800A
Accuracy +/- 0.6%
Resolution: 0.02A
Sample speed: 100ms
Voltage measurement:
Measuring range: 0-75V
Accuracy: +/-0.2%
Resolution: 1mV
Temperature measurement:
Range: -15 - 80°C
Accuracy (-10 - 60°C) 3%
Dimensions:
Size: 118x40x52mm
Battery connectors: M10
Connection options: 1 battery bank
Tank module ST107:
Operating Voltage: 6V - 35V
Temperature range: -20 - +70°C
Power consumption at 12V:
in operation 2.5mA
Voltage measurement:
Measuring range: 0-35V
Accuracy: +/-0.2%
Resolution: 1mV
Resistance inputs:
Range: 10 ohms - 65k ohms
Accuracy +/-0.1%
Dimensions:
Size: 112x72x31mm
Power module SCQ25:
Operating Voltage: 6V - 35V
Temperature range: -20 - +70°C
Power consumption at 12V:
in operation 2.5mA
current measurement:
Measuring range: 0.01 - 25A
resilience:
Duration: 25A
Peak (<60s) 35A
Accuracy +/- 0.6%
Resolution: 0.01A
Sample speed: 100ms
Dimensions:
Size: 183x91x34mm
SC503
Simarine SC503 Shunt 500A for Pico Battery Later New version
Innovative combination of side resistance and tank filling module.
SC503 is a high-precision combination co-resistance for the battery maker Pico with 2 voltage sensors, 2 temperature sensors, 1x Socet for temperature sensor with JST connector and 1 current sensor for up to 500 A for systems with up to 75 V.
It can be used to monitor the power consumption of large consumers (inverter, bow and rear beam rudder, anchor winches) and electricity generators (country power charging devices and solar modules). In addition, it enables the monitoring of tanks for fuel, fresh water and gray water.
Operating
Voltage range
6 - 35 V
TemPartature range
-20 -+70 ° C
Power Consumption AT 12 V
Operating
1.2 MA
Current Measuring Range
Channel
0.01 - 700 a
Accuracy
± 0,6 %
resolution
0.01 a
Sampling rate
100 ms
Maximum current
Continuous
500 a
Peak Current (<1 min)
700 a
Peak Current (<5 min)
1000 A
Voltage Drop AT 300 A
50 mv
Maximum voltage on Connections
35 V
Voltage inputs
Range
0 - 75 V
resolution
1 mv
Accuracy
± 0,2 %
Sampling rate
100 ms
Resistance inputs
Range
0 Ohm - 65 Kohm
Accuracy
± 3,0%
TemPartature sensor - NTC 10K
Range
-15 -+80 ° C
Accuracy (-10-60 ° C, 14-140 ° F)
± 3,0%
Connectivity
Up to
Batteries
1
TemPartature sensors
3
Voltage sensors
2
Sicom RJ9 Sockets
2
Installation and dimension
Dimensions (Langth X Width X Depth)
120 x 120 x 60 mm
Battery Connection
M 10 Bolts
BPP900400100
Victron Venus GX System Monitoring BPP900400100
The Victron Energy Venus GX System Control module (MPN BPP900400100) offers intuitive operation and monitoring of all power systems based on Victron components.
It is particularly suitable as a heart in an ESS (Energy Storage System).
VOM Functional scope of the Venus GX resembles the Color Control GX from Victron, only without a display and without installed modem. It transfers all system data to the free VRM portal of Victron, from where you can monitor and administration your electricity system worldwide.
In addition to the power electronics, tank filling levels of up to 3 tanks can also be monitored and visualized in the VRM portal. In addition to remote monitoring of the shot devices, configuration is also possible from a distance.
Remote Console on the VRM
The setup and the monitoring take place via the remote console. Either via the VRM, via the built -in WiFi access point or via the local LAN/WIFI network.
Automatic aggregate start/stop
An extremely flexible start/stop system. Use of loading, voltage, load and other parameters. Certain settings for rest periods and an optional monthly test run can be set.
Internet connection
The Venus GX can be connected to an Ethernet cable and via Wi-Fi to the Internet. The Venus GX has no internal mobile phone modem: there is no slot for a SIM card. Instead, use a standard GPRS or 3 g router.
Inputs of the tank level indicator
The inputs for the tank level indicator are resistant: connect them to a resistant tank transmitter. Such tank transmitters are not offered by Victron. The ports of the tank level indicator can be configured in such a way that you can work with European tank channels (0-180 ohms), or with US tank channels (240-30 ohms).
Data recording
If the system is connected to the Internet, all data is sent to the VRM portal. If no internet connection is available, the Venus GX stores the data for up to 48 hours internally. By inserting a micro SD card or a USB stick, even more data can be saved. These files can be uploaded to the VRM portal or converted offline with the VictronConnect app for analysis.
More highlights
Venus GX can automatically update itself on the Internet if a new software version is available.
Several languages: English, Czech, German, Spanish, French, Italian, Dutch, Russian, Swedish, Turkish, Chinese, Arabic.
Use the Venus GX as a Modbus TCP Gateway to all connected Victron products.
Linux OS based operating system
Supported products
Multis and quattros, including the gap phase and three-phase systems. Monitoring and control (on/off and electricity limiter). A change in the configuration is possible (only from afar via the Internet, not without an internet connection).
Bluesolar Mppt Solar chargers with a Ve.direct port.
Bluesolar Mppt 150/70 and the Mppt 150/85 with Ve.can port. If several blues solar MPPTs with Ve.CAN are used in parallel circuit, all information is combined in one.
Devices of the BMV-700 family can be connected directly to the VE.Direct ports on Venus GX. Use the VE.Direct cable.
Devices of the BMV-600 family can be connected to the VE.Direct ports on Venus GX. An additional cable is required.
Lynx ion + shunt
Lynx ion bms
Lynx shunt ve.can
Skylla-i battery charger
Nmea2000 fuel sensors
A USB GPS can be connected to the USB port. The data is sent to the VRM portal for traceability. The latest position is then displayed on the map on the VRM.
Fronius PV inverter
scope of delivery:
1x Victron BPP900400100 Venus GX System Control module
1x operating instructions
data sheet
Generally:
Manufacturer part number
BPP900400100
Product
Central system monitoring unit
Manufacturer
Victron Energy
Ambient temperature
-20c- +50c
Dimensions (LXBXH)
45 x 143 x 96 mm
Weight
0.254 kg
EAN
8719076037897
SC303
Simarine SC303 Shunt 300A for Pico Battery Lighter New version
Innovative combination of side resistance and tank filling module.
SC303 is an active combination-by-fabric resistance for the battery tenants Pico and Pico One with 2 voltage sensors, 2 tank filling stand or temperature sensors, 1x Socet for temperature sensor with JSt connector and 1 current sensor for up to 300 A for systems with up to 75 V.
It can be used to monitor the power consumption of large consumers (inverter, bow and rear beam rudder, anchor winches) and electricity generators (country power charging devices and solar modules). In addition, it enables the monitoring of tanks for fuel, fresh water and gray water.
Operating
Power Source Voltage Range
6 - 35 V
TemPartature range
-20 -+70 ° C
Power Consumption AT 12 V
Operating
0.8 MA
Current Measuring Range
Channel
0.1 - 320 a
Accuracy
± 0,6 %
resolution
0.01 a
Sampling rate
100 ms
Maximum current
Continuous
300 a
Peak Current (<1 min)
400 a
Peak Current (<5 min)
700 a
Voltage Drop AT 300 A
50 mv
Maximum voltage on Connections
35 V
Voltage inputs
Range
0 - 75 V
resolution
1 mv
Accuracy
± 0,2 %
Sampling rate
100 ms
Resistance inputs
Range
0 Ohm - 65 Kohm
Accuracy
± 3,0%
TemPartature sensor - NTC 10K
Range
-15 -+80 ° C
Accuracy (-10-60 ° C, 14-140 ° F)
± 3,0%
Connectivity
Up to
Batteries
1
TemPartature sensors
3
Voltage sensors
2
Sicom RJ9 Sockets
2
Installation and dimension
Dimensions (Langth X Width X Depth)
120 x 120 x 60 mm
Battery Connection
M 10 Bolts
1269
Votronic LCD battery computer 400 S with smart shunt and mass band 75
The following values are measured, calculated and displayed:
Battery voltage on Board battery 7 to 32 V, internal measuring resolution 0.1 V allows conclusions to be drawn about the battery behavior for different loads and serves to control function control z. B. the charger, the solar system, alternator etc. flashing warning indicators with overvoltage.
Battery flow (charging/unloading) +/- 0 to max. +/- 1800 a, internal measuring resolution 0.1 a
Control of the discharge flows (load) by consumers, indicated by a " -" sign, control of the charging flows, characterized by a "batch" sign.
Battery capacity (Ah and %)
Remaining load from 0 AH / 0% (empty) to nominal capacity max. 2000 Ah / 100% (full)
Battery voltage 2. Battery (e.g. start battery), 7 to 32 V (volt), internal measuring resolution 0.1 V
Switch output freely programming and palpable (PNP, plus potential 12V / 24V, max. 0.5a)
including the remaining running display
How much remaining load does my on -board battery still have? Is the battery really full? Why is energy being removed from the battery despite the consumer switched off? The Votronic LCD battery computer S answers these questions to the percentage (%) and the amperpower (AH). At the push of a button, it provides comprehensive information about the current loading status of the battery, the flowing battery flows and the voltage position of the battery. Building on the extremely proven Votronic LCD battery computer, the LCD battery computer was created. The versatile, easy-to-use display functions have been expanded by a white illuminated, clear LCD display, which can also be read from a large distance and in the event of unfavorable lighting conditions.
The device is constantly in contact with "its battery" and thus registered and evaluates all battery actions. All loading and discharge flows are meticulously counted, battery sizes, self-discharge, battery load etc. are taken into account using one programmed characteristic fields. The residual capacity of the battery is then calculated from the measured values and the battery size. The result is the correct display of the charging status (the still removable capacity, residual charge) of the on-board battery as a numerical value in ampers hours ("AH") and in percent ("%") as well as as a clear filling level, as with a tank watch. The LCD battery computer S is suitable for all battery types (acid, gel, AGM, lithium adjustable) with 12V and 24V battery voltage.
Of course, the current battery voltage ("V") and the current battery current ("A") are also available. Discharge flows (consumers) are marked by a minus sign. Charging flows are also characterized by a "Charge", legible sign. Regardless of this, there is a further display option for tensioning a second battery, e.g. to monitor the vehicle's starter battery.
The LCD battery computer S has a freely programmable switching output for tax, control and warning purposes, for example, depending on the loading status of the on-board battery (0-100%) of consumers or issuing a warning. Input and output points can be adjusted in % and independently of one another, which enables any switching functions. In addition, these can be oversteered manually at any time by pressing a button.
Application example: Automatic protection of the battery against harmful deep discharge, consumers are switched off exactly according to charging status, e.g. with less than 25% charging status. At the push of a button, an emergency one function is possible to continue to be supplied with consumers. The device can therefore also be used as a remote control battery switch (on/off) with deep discharge protection.
A connected connecting cable connects the display to a robust Precision measurement resistance (smart shunt), which is connected directly to the minus pole of the on-board battery and on which the tensions and currents of the battery are recorded. Here is also the switching exit for connecting signalers or strong switching relays.
In keeping with the Votronic module system, the device is bound to the other display modules both optically and mechanically (uniform height 85mm) and the low installation depth of only 22mm allows assembly at almost every point.
Important information about the smart shunt:
The selection of the right smart shunt (100 s, 200 s or 400 s) depends exclusively on the maximum permanent load by consumers (a) and not on the overall battery capacity (AH).
Also available in boats with the electronics protected from moisture!
Technical specifications
Device type
Art.-
No.
Measurement
Shunt in
Deliver-
scope
Electricity-
on-
seizure
[Ma]
Electricity
lighting
(Can be switched off)
[Ma]
Battery-
Nennkapaz.
adjustable
[Ah]
Electricity
area
Shunt [a]
Duration/15/7 min.
Weight
Display/shunt
[G]
LCD battery computer 100 S
1263
100 A
8
60
50 - 2000
100 / 150 / 200
55 / 240
LCD battery computer 200 S
1266
200 A
8
60
50 - 2000
200 / 300 / 400
55 / 240
LCD battery computer 400 S
1269
400 a
8
60
100 - 2000
400 / 600 / 800
55 / 245
Battery voltage lead acid/gel/AGM:
12 and 24 V
Battery voltage Lifepo4
12.8-13.2 V / 25.6-26.4 V
Test mark:
CE, e-test (EMV/car directive)
Scope of delivery:
Display unit, Mess-Shunt 100 A, 200 A or 400 A including smart shunt cover,
Connection cable 5m long, mass band, fastening screws, instructions, drilling template
Dimensions (W x H x T):
80 x 85 x 24 mm
Setting up (W x H x T):
66 x 72 x 22 mm
Dimensions Shunt (W x H X T):
135 x 32 x 44 mm
The devices are tailored to the measurement shunts contained in the scope of delivery and cannot be operated or exchanged in conjunction with other measuring shunts!
PK23-2-SB
Simarine PICO Standard Package - NEW Version Black / Surface Mount
New version with two additional measuring inputs, battery monitor of the latest generation!
Battery Monitor PICO from SIMARINE for monitoring batteries, consumers and tanks. With aluminum frame, integrated barometer, WiFi and free app for Android and iOS.
PICO standard package The PICO STANDARD package is the perfect battery and tank monitoring solution for yachts and caravans with 1 main battery, up to 4 auxiliary batteries (voltage display only) and up to 6 tanks.
Battery monitor PICO with aluminum frame, WiFi and free app for Android and iOS.
Scope of delivery:
1 x PICO with integr. Barometer,
1 x Shunt SC303 (300A, 1 battery temperature, 2 voltages 0-75V, 2x resistance sensor 0-65kOhm) (temperature or tank),
1 x ST107 Tank Module (3 voltage inputs, 4 resistance inputs, 1 relay output)
With the PICO, Simarine is setting new standards for marine battery monitors in terms of design, functionality, connectivity and ease of use.
Compatible with all SIMARINE shunts and modules
The expandable architecture allows adding up to 20 SIMARINE shunts and modules to monitor all types of boats, yachts and caravans - from small to superyacht system with up to 6 battery banks, 14 tanks and 20 independent consumers and generators.
PICO's display unit consists of a slim anodized aluminum body and thick Gorilla Glass with an anti-reflective coating that protects the optically bonded 3.5-inch high-contrast IPS LCD display. It is waterproof and dustproof and can be mounted both indoors and outdoors. The screen brightness is automatically adjusted using a light sensor. The device is operated with four water-tolerant CapSense buttons. The barograph provides accurate air pressure values, trends and history.
Free SIMARINE Android and iOS apps are available to connect your PICO to your smartphone via Wi-Fi. With the apps you can monitor all battery and tank data, upload history, edit and restore settings and even update the firmware with new features.
Choose the different colors and mounting methods in the menu.
1940162
Simarine CARAVAN Control Panel Set VIA
Simarine Caravan Control VIADas Simarine Caravan Control VIA Set besteht aus dem Anzeigeelement SCC8 und der Steuereinheit SPDU-52. Das Caravan Panel kann bis zu 6 Batterien, 14 Tanksensoren, 14 Temperatursensoren und 20 unabhängige Stromsensoren (Shunts) überwachen, sowie 2 Relais Schalter steuern. Es is mit einem Wi-Fi-Modul ausgestattet, um mit der für Android™- und iPhone®-Smartphone verfügbaren App zu kommunizieren. Die App ermöglicht den Zugriff auf Live Daten, Verlaufsdaten, Analysefunktionen, sowie Konfiguration und Aktualisierung des Panels.
SCC8 Display-PanelDie Informationen werden auf einem großen 3,5" hochauflösenden IPS-Display mit Gorilla®-Glas und entspiegelter Beschichtung angezeigt, um eine bessere Sichtbarkeit zu gewährleisten. Das Gerät wird mit 8 Steuertasten geliefert, über die alle angeschlossenen Geräte bequem gesteuert werden können.
Die Menüführung ist transparent und einfach zu bedienen. Alle Änderungen können mit vier Touch Tasten unter dem Bildschirm vorgenommen werden. Der erforderliche Einbauraum hinter dem Gehäuse beträgt 30mm.
Funktionen des SCC im Überblick:
WiFi and Bluetooth integriertBatterie ÜberwachungTank ÜberwachungIntegrierter BarographAnti-Scratch Gorilla Glass 3.5” IPS LCD DisplayGehäuse aus eloxiertem Aluminium8 Buttons direkt am GerätFernwartung und Steuerung via APP SPDU-52 StromverteilerDie Stromverteilereinheit Simarine SPDU-52 ist ein sehr vielseitiges Modul. Sein Zweck ist es, andere Module und Shunts zu versorgen, die vom Caravan Panel verwendet werden. An die SPDU-52 mit Zusatzmodulen können bis zu 6 Batterien, 24 Shunts, 10 Temperatursensoren, 14 Tankfüllstandssensoren und 2 Neigungssensoren angeschlossen werden.
Das SPDU-52 verfügt über 3 SICOM-Ports, zwei für zusätzliche Stromausgänge Ein-/Ausgänge (SICOM 1, SICOM 2) und einen für das Caravan Panel (SiCOM PANEL). Es verfügt außerdem über 4 Kanäle (Solar, Ladegerät, Hauptbatterie, Starterbatterie), die den Strom messen. Die Spannungsmessung an jedem dieser Kanäle beträgt 0–35 VDC mit einer Genauigkeit von ±0,5%. Die Widerstandsmessung an jedem dieser Kanäle beträgt 0–65 kOhm mit einer Genauigkeit von ±3%.
VORSICHT: Installieren Sie den Stromaggregaten an einem sauberen und trockenen Ort, der vor versehentlichem Verschütten von Flüssigkeiten geschützt ist. Für weitere Informationen für den Einbau und der Verschaltung bitte ins Handbuch schauen.
Mobile APP des Caravan ControlMit Ihren Smartphone können Sie über die WLAN Verbindung Ihr Caravan Panel fernsteuern. Mit der App können Sie aktuelle (Live) Daten von Batterien, Tanks, Thermometern und Barographen überwachen. Sie können auch die Caravan Panel Einstellungen auf Ihrem Smartphone ändern und die Simarine Firmware einfach auf eine neue Version aktualisieren, sobald sie verfügbar ist.Mit der mobilen App können aktuelle Caravan Control Einstellungen gespeichert und später wiederhergestellt werden. Außerdem werden automatische Sicherungen der aktuellen Einstellung vorgenommen, sobald diese verändert werden. Diese Einstellungen werden in einer Liste gespeichert und können nach belieben wiederhergestellt werden.
Das Caravan Panel ist mit folgenden Simarine Modulen kompatibel:
SC303 Digitaler Shunt – Hochpräziser 300A Shunt, für bis zu 75V Systeme.SC503 Digitaler Shunt – Hochpräziser 500A Shunt, für bis zu 75V Systeme.SDI01 Neigungsmesser – Hochauflösender digitaler Neigungsmesser für Nick- und Rollneigung mit manueller Kalibrierung. ·SC302T Digitaler Shunt – Hochpräziser 300A Shunt mit 2 Widerstandseingängen zur Tankfüllstandmessung und 2 Spannungseingängen von zwei Batterien.SCQ25 Quadro Digitaler Shunt Module – Hochpräziser 4x25A Shunt, für 12V und 24V Systeme.SCQ50 Quadro Digitaler Shunt Module – Hochpräziser 4x50A Shunt, für 12V und 24V Systeme. ·SCQ25T Quadro Digitaler Shunt und Tank Module – Hochpräziser 4x25A Shunt und Tank Module mit 4 Widerstands und 3 Spannungs Eingängen.ST107 Digitaler Tank Module mit 4 Widerstands und 3 Spannungs-Inputs.Geeignete Tanksensoren: Grundsätzlich alle Widerstandsbezogene Füllstandsanzeiger wie z.b:
Wema Geber für Wasser und Treibstoff S3Schaudt Tanksonde (evtl. wird ein Adapterkabel benötigt)
5747
Votronic VPC Jupiter 100
Multi-panel system For motorhomes in 3 different versions
The Votronic Power Control (VPC for short) is an innovative multi-panel system for motorhomes that combines the most important functions and information in one device. The information is shown via a light, white illuminated graphic display. The large -scale values can be read excellently in all lighting conditions, even from a greater distance. Colored light emits signal the selected function at any time. The individual versions differ in their range of functions, which is designed for the specific requirements of the different vehicle types. While the version Jupiter, for example, leaves almost nothing to be desired with regard to energy supply and filling levels, the Mercury execution is particularly recommended for more compact vehicles, which often do not have any fixed tanks.
VPC Terra and Jupiter can also be covered with 3 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank etc.). The individual switch 2xum are suitable for switching, e.g. switch panel 16 a s Art. 1289 or switch panel 2x16 a S Art.-No. 1291
All devices have at least one voltage display for the board and starter battery and a switching exit for an external relay as the main switch. A switch-off alarm provider (beer) on the panel and a note in the advertisement draw attention to this when an adjustable energy threshold has been below and the main switch is automatically switched off in a few seconds to prevent a deep discharge of the battery.
The three versions differ in the range of functions as follows:
VPC Terra
-
-
-
-
VPC Merkur
-
-
-
VPC Jupiter
*
-
-
Voltage display in v
the on-board and start battery
With undervoltage protection for the on-board battery
Main counter For the on -board supply
About switching exit
(e.g. over Switch Unit 40 or Switch Unit 100)
* Only vpc jupiter with Smart shunt:
Battery computer for the on-board battery
(including battery voltage Start battery)
Battery voltage on board battery in V
Battery flow in A (+ = load / - = unloading)
Battery capacity in Ah and %
Remaining term in H until the programmed offset threshold is reached
Solar computer for all votronic Solar controller From 2014 and VBCS Triple
Acute solar performance in W
Current solar power in A
Invited solar capacity in Ah
Invited solar energy in kWh
Values Wh/kWh and AH are added, displayed and can be reset to "zero" individually.
Filler display in %
For fresh water and sewage tank
Switch for the Fresh water pump
Max. 16A (potential -free output)
thermometer
Interior and outer thermometer in ° C
Including 1 temperature sensor
Clock
Time in 24-hour format
USB double charging port
5 V / 2.5 a
Thermometer/o'clock
Combined function for indoor and outside temperature in ° C including temperature sensors and time in 24-hour format.
Device type
Art.-
No.
nominal voltage
On -board battery
[V]
Electricity-
recording
[Ma]
Switching current
pump
Max. [A]
Dimensions
(WXHXT)
[mm]
Installation road
[mm]
VPC Terra 1
5741
12 / 24
6 - 60
16
200 x 65 x 28
185 x 57 x 22
VPC Merkur 2
5744
12
6 - 60
-
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 100 3
5747
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 200 3
5748
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 400 3
5749
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
Test mark: CE, e-test (EMV/car directive)
scope of delivery 1:
Fastening screws, connection cable for votronic solar controller or VBCS triple 5m long, instructions
scope of delivery 2:
Fastening screws, connection cable for votronic solar controller or VBCS triple 5m long,
2 temperature sensors (inside & outside), instructions
scope of delivery 3:
Mess-Shunt 100 A, 200 A or 400 A included Smart shunt cover, Fastening screws,
1 connection cable 5m long for Votronic solar controller or VBCS triple and for smart shunt, 2 temperature sensors (inside & outside), instructions
SDI01
Simarine digital inclination sensor
Two axes of inclination meters for vehicle leveling, plug-and-play
For the control systems: Simarine Picoone Battery Monitor, 12V (62012) and Simarine Caravan Control System + Surveillance/switching system, up to 10 devices (74915)
Technical specifications:
Accuracy: ± 1 °
Resolution: 0.1 °
Scope of delivery:
Inclination meter
5749
Votronic VPC Jupiter 400
Multi-panel system For motorhomes in 3 different versions
The Votronic Power Control (VPC for short) is an innovative multi-panel system for motorhomes that combines the most important functions and information in one device. The information is shown via a light, white illuminated graphic display. The large -scale values can be read excellently in all lighting conditions, even from a greater distance. Colored light emits signal the selected function at any time. The individual versions differ in their range of functions, which is designed for the specific requirements of the different vehicle types. While the version Jupiter, for example, leaves almost nothing to be desired with regard to energy supply and filling levels, the Mercury execution is particularly recommended for more compact vehicles, which often do not have any fixed tanks.
VPC Terra and Jupiter can also be covered with 3 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank etc.). The individual switch 2xum are suitable for switching, e.g. switch panel 16 a s Art. 1289 or switch panel 2x16 a S Art.-No. 1291
All devices have at least one voltage display for the board and starter battery and a switching exit for an external relay as the main switch. A switch-off alarm provider (beer) on the panel and a note in the advertisement draw attention to this when an adjustable energy threshold has been below and the main switch is automatically switched off in a few seconds to prevent a deep discharge of the battery.
Delivery time: 1-3 working days
The three versions differ in the range of functions as follows:
VPC Terra
-
-
-
-
VPC Merkur
-
-
-
VPC Jupiter
*
-
-
Voltage display in v
the on-board and start battery
With undervoltage protection for the on-board battery
Main counter For the on -board supply
About switching exit
(e.g. over Switch Unit 40 or Switch Unit 100)
* Only vpc jupiter with Smart shunt:
Battery computer for the on-board battery
(including battery voltage Start battery)
Battery voltage on board battery in V
Battery flow in A (+ = load / - = unloading)
Battery capacity in Ah and %
Remaining term in H until the programmed offset threshold is reached
Solar computer for all votronic Solar controller From 2014 and VBCS Triple
Acute solar performance in W
Current solar power in A
Invited solar capacity in Ah
Invited solar energy in kWh
Values Wh/kWh and AH are added, displayed and can be reset to "zero" individually.
Filler display in %
For fresh water and sewage tank
Switch for the Fresh water pump
Max. 16A (potential -free output)
thermometer
Interior and outer thermometer in ° C
Including 1 temperature sensor
Clock
Time in 24-hour format
USB double charging port
5 V / 2.5 a
Thermometer/o'clock
Combined function for indoor and outside temperature in ° C including temperature sensors and time in 24-hour format.
Device type
Art.-
No.
nominal voltage
On -board battery
[V]
Electricity-
recording
[Ma]
Switching current
pump
Max. [A]
Dimensions
(WXHXT)
[mm]
Installation road
[mm]
VPC Terra 1
5741
12 / 24
6 - 60
16
200 x 65 x 28
185 x 57 x 22
VPC Merkur 2
5744
12
6 - 60
-
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 100 3
5747
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 200 3
5748
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 400 3
5749
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
Test mark: CE, e-test (EMV/car directive)
scope of delivery 1:
Fastening screws, connection cable for votronic solar controller or VBCS triple 5m long, instructions
scope of delivery 2:
Fastening screws, connection cable for votronic solar controller or VBCS triple 5m long,
2 temperature sensors (inside & outside), instructions
scope of delivery 3:
Mess-Shunt 100 A, 200 A or 400 A included Smart shunt cover, Fastening screws,
1 connection cable 5m long for Votronic solar controller or VBCS triple and for smart shunt, 2 temperature sensors (inside & outside), instructions
SHU050210050
Victron Smartshunt 1000A/50MV battery life
Smart battery monitoring
The Smartshunt 1000A from Victron Energy (MPN Shu050210050) is an all-in-one battery lifeer. It connects via Bluetooth with the VictronConnect app on your phone (or tablet) and you can read all monitored battery parameters such as loading status, remaining running time, course information and much more. Settings can also be easily changed.
Alternatively, the Smartshunt can be connected and read by a GX device. The connection to the Smartshunt is via a VE.Direct cable.
The Smartshunt is a good alternative for a BMV battery lesser, especially for systems in which battery monitoring is required, but less wiring and disorder is required.
Characteristics
Equipped with Bluetooth
Check the battery parameters comfortably on the smartphone or tablet
Connection to GX device possible
Additional input for further surveillance options
uncomplicated insalation
Differences to the BMV-712 battery monitor
No programmable optical and acoustic alarm
No programmable relay
Why is battery monitoring important?
Batteries are used in versatile areas, in most cases to store energy for later use. The battery itself does not indicate the stored amount of energy.
The lifespan of batteries depends on many factors. The operating duration can be shortened by under or overloading, deep discharge, too high charging or discharge flows and high ambient temperature. Through monitoring with a battery tenant, the user receives important feedback in order to take countermeasures to extend the battery life if necessary.
Scope of delivery:
1x Smartshunt 1000a
2x cable with fuse, for '+' connection and starter battery or the center connection
data sheet
Generally
item number
1-67-012695
Manufacturer part number
Shu050210050
delivery time
2-5 working days
Product
Battery monitoring (deep discharge)
Manufacturer
Victron Energy
IP protection
IP21
Weight
1 kg
EAN
8719076044260
BPP900480100
Victron Ekron GX
TheVictron Energy Ekrono GX is a completely encapsulated all-in-one system made of GX device and waterproof 7 ”display. It is perfect for installation in demanding environments such as ships.
Higher computing power and perfect protection against the elements make the Ekrano a perfect choice for installations, in which nothing should be left to chance and the electronics must be particularly well protected. Due to the absence of the HDMI connection between the computer and the screen, another source of error is eliminated. The same screen is installed as in the GX Touch 70, with 7 inch screen diagonal. Communication centerThe GX Communication Center enables you to always check your system perfectly from any location and maximize your performance. Simply access your system via our VICTRON Remote Management (VRM) portal, or directly by using the integrated touch screen, a multifunction display (MFD) or the VICTRONCONNECT app.Wireless sensors, e.g. from Ruuvi or Mopeka, can also be read out via one (or more) USB Bluetooth adapter.
Remote Console on the VRMMonitoring, control and configuration of the Victron Energy Ekron GX from a distance, over the Internet. Just like on-site, with Remote Console. The same functionality is also available in the local network LAN or via the WLAN access point of the Ekrano GX.
Perfect monitoring & controlImmediate monitoring of the charging status of the battery, power consumption, energy generation from PV, generator and network or checking the tank filling and temperature measurements. Simply control the current limitation for country electricity feed, the (automatic) start/stop generator (s) or change any settings to optimize the system. Training of warning messages, implementation of diagnostic checks and remedy of complications from a distance.
Easy assembly and configurationThe Ekrano GX is particularly easy to assemble in one device thanks to the combination of computer and touchscreen. His integrated touchscreen is waterproof, so that it can also be attached outdoors. The Bluetooth function enables a quick connection and configuration via the VictronConnect-app (available for Android, iOS, Windows and Mac OS).Technical:Weight 0.95 kgDimensions 115.0 x 260.0 x 300.0 cmBattery voltage 8-70VDCBluetooth yesProtection class IP67 (front)Communication Ve.direct, Ve.bus, Ve.Can, Ethernet, Modbus TCP, CAN, WIFI, Bluetooth, USB
S008
Simarine SCQ50 Quadro Shunt 4x50a
The SCQ50 is an innovative shunt module with four inputs for monitoring individual consumers and generators with permanent flows up to 50a (35a lace) per input in 12V and 24V systems.
This is very practical for monitoring smaller consumers such as refrigerators or generators such as solar, wind, water or country power. The power channels can be combined for higher current thicknesses, i.e. the permanent currents on the combined channels are up to 50a (70a lace) at 12V and 24V. The innovative, protected architecture of the SCQ50 enables the wiring either on the negative (low) or the positive (high) side. Up to five modules can be connected at the same time to monitor up to 20 power channels (only with Pico Battery Monitor).
5741
Votronic 5741 VPC Terra
Delivery time: 1-3 working days
Multi-panel system For motorhomes in 3 different versions
The Votronic Power Control (VPC for short) is an innovative multi-panel system for motorhomes that combines the most important functions and information in one device. The information is shown via a light, white illuminated graphic display. The large -scale values can be read excellently in all lighting conditions, even from a greater distance. Colored light emits signal the selected function at any time. The individual versions differ in their range of functions, which is designed for the specific requirements of the different vehicle types. While the version Jupiter, for example, leaves almost nothing to be desired with regard to energy supply and filling levels, the Mercury execution is particularly recommended for more compact vehicles, which often do not have any fixed tanks.
VPC Terra and Jupiter can also be covered with 3 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank etc.). The individual switch 2xum are suitable for switching, e.g. switch panel 16 a s Art. 1289 or switch panel 2x16 a S Art.-No. 1291
All devices have at least one voltage display for the board and starter battery and a switching exit for an external relay as the main switch. A switch-off alarm provider (beer) on the panel and a note in the advertisement draw attention to this when an adjustable energy threshold has been below and the main switch is automatically switched off in a few seconds to prevent a deep discharge of the battery.
The three versions differ in the range of functions as follows:
VPC Terra
-
-
-
-
VPC Merkur
-
-
-
VPC Jupiter
*
-
-
Voltage display in v
the on-board and start battery
With undervoltage protection for the on-board battery
Main counter For the on -board supply
About switching exit
(e.g. over Switch Unit 40 or Switch Unit 100)
* Only vpc jupiter with Smart shunt:
Battery computer for the on-board battery
(including battery voltage Start battery)
Battery voltage on board battery in V
Battery flow in A (+ = load / - = unloading)
Battery capacity in Ah and %
Remaining term in H until the programmed offset threshold is reached
Solar computer for all votronic Solar controller From 2014 and VBCS Triple
Acute solar performance in W
Current solar power in A
Invited solar capacity in Ah
Invited solar energy in kWh
Values Wh/kWh and AH are added, displayed and can be reset to "zero" individually.
Filler display in %
For fresh water and sewage tank
Switch for the Fresh water pump
Max. 16A (potential -free output)
thermometer
Interior and outer thermometer in ° C
Including 1 temperature sensor
Clock
Time in 24-hour format
USB double charging port
5 V / 2.5 a
Thermometer/o'clock
Combined function for indoor and outside temperature in ° C including temperature sensors and time in 24-hour format.
Device type
Art.-
No.
nominal voltage
On -board battery
[V]
Electricity-
recording
[Ma]
Switching current
pump
Max. [A]
Dimensions
(WXHXT)
[mm]
Installation road
[mm]
VPC Terra 1
5741
12 / 24
6 - 60
16
200 x 65 x 28
185 x 57 x 22
VPC Merkur 2
5744
12
6 - 60
-
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 100 3
5747
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 200 3
5748
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
VPC Jupiter 400 3
5749
12
13 - 60
16
200 x 65 x 30
185 x 57 x 24
Test mark: CE, e-test (EMV/car directive)
scope of delivery 1:
Fastening screws, connection cable for votronic solar controller or VBCS triple 5m long, instructions
scope of delivery 2:
Fastening screws, connection cable for votronic solar controller or VBCS triple 5m long,
2 temperature sensors (inside & outside), instructions
scope of delivery 3:
Mess-Shunt 100 A, 200 A or 400 A included Smart shunt cover, Fastening screws,
1 connection cable 5m long for Votronic solar controller or VBCS triple and for smart shunt, 2 temperature sensors (inside & outside), instructions
? Delivery time: 5-6 working days
S004
Simarine SCQ25T Quadro Shunt and tank module
The innovative combination (SCQ25T) made of shunt, tank interface and voltage module from Simarine.
The highly innovative shunt module with four inputs for monitoring the permanent current flow of individual consumers and generators up to 25 a (35 a tip) per input in 12 V and 24 V systems.
The equipment with four resistance inputs for the resistance or temperature sensors of the resistance type and three voltage inputs for tank sensors and battery tensions of voltage types enable far-reaching connection options.
This is very practical for monitoring smaller consumers such as refrigerators or generators such as solar, wind, hydropower or country power.
The power channels can be combined for higher current thicknesses, i.e. H. The permanent currents of the combined channels up to 50 a (70 a lace) at 12 V and 24 V.
The innovative protected architecture of the SCQ25T enables wiring on the negative (low) or positive (high) side.
LYN034160200
Victron Lynx Smart BMS 500 Battery management system
The Lynx Smart BMS from VICTRON Energy (MPN LYN034160200) is a special battery management system for lithium smart batteries from VICTRON. It contains a positive and a negative collective rail, a BMS, a circular switch and a battery monitor. The Lynx Smart BMS is part of the modular Lynx distribution system.
Characteristics
Built-in 500A control switch, for relapse
Battery guard with which the loading status is shown in percent and other data is displayed
Alarm relay: delivers a warning before the system switches off
Status and Bluetooth LED
Communication via Bluetooth with VictronConnect app
Communication via VE.CAN with GX device
Including two Ve.CAN RJ45 terminators
Technical specifications
Supply voltage area: 9-58 VDC
Supported system voltages: 12, 24 or 48V
Polation protection: yes
Main safety protection permanent current: 500A continuously
Top current strength of the main safety protection: 600A for 5 minutes
Electricity consumption in active mode: approx. 2.6W (200mA at 13V)
Operating temperature range: -40 ° C - +60 ° C
Protection class: IP22
Dimensions: 190 x 180 x 80 mm
Weight: 2 kg
The Lynx distribution system
The Lynx distribution system is a modular collective rail system that includes DC connections, distribution, securing, battery monitoring and / or lithium battery management.
The Lynx Distribution System consists of the following parts:
Lynx power in - A positive and negative collective rail with 4 connections for batteries or DC devices
Lynx distributor - A positive and negative collective rail with 4 secured connections for batteries or direct current devices together with security monitoring
Lynx shunt ve.can - A positive collective rail with space for a main system backup and a negative collective rail with a shunt for battery monitoring. It has Ve.CAN communication for monitoring and furnishing in a GX device
Lynx Smart BMS - for use with Victron Energy Smart Lithium batteries. It contains a positive collective rail with a protective switch that is powered by a battery management system and a negative collective rail with a shunt for battery monitoring. It has Bluetooth communication for monitoring and furnishing via the VictronConnect app and a VE.CAN communication for monitoring with a GX device and the VRM portal.
Scope of delivery:
1x Victron Energy Lynx Smart BMS (LYN034160200)
2x RJ45 VE.CAN final resistances
1x operating instructions
IP protection
IP22
Manufacturer
Victron Energy
Dimensions (LXBXH)
190 x 180 x 80 mm
Manufacturer part number
Lyn034160200
EAN
8719076047476
SHU065150050
Victron SmartShunt 500A/50mV IP65 Current Measurement Shunt
Der Victron Shunt 500A - 50mV wird für Strommessgeräte mit analogen oder digitalen Anzeigeinstrumenten benötigt, denn diese werden in der Regel über eine Messung, einer sehr kleinen Spannung an einem Shunt realisiert. Im Fall der Victron Smartshunts IP65 500A – 2000A sind es 50mV. Dabei gilt: umso kleiner die Messspannung an den Shunts ist, desto geringer sind die Auswirkungen auf den restlichen Stromkreis des Systems. Mit 50mV liefert dieser einen exzellenten Wert.46x120x54 cm
Unterschiede zum BMV-712 Batteriemonitor:Keine sichtbare oder akustische Alarme (Alarme sind nur sichtbar über die VictronConnect App oder eine GX Einheit)Kein programmierbares RelaisSchutzklasse IP65Ob Sie für Ihr Anzeigegerät einen Shunt benötigen erfahren Sie in der Anleitung des jeweiligen Geräts.
Lieferumfang1x Victron SHU065150050 Smartshunt 500A - 50mV IP65