Connection Cables, Adapters, and Sockets
ASS030530218
Victron 1.8m Ve.direct cable connection cable
The 1.80m VE.Direct Cable from Victron (ASS030530218) is required to combine devices that are supposed to communicate via the VE-Direct Port. For example, the Bluesolar controller and the MPPT Control remote control panel.
The following connections can be established:
Victron Bluesolar Mppt controller to Victron Color Control GX Panel
Victron Bluesolar Mppt controller to Mppt Control remote control unit unit BMV70XXX series for Color Control GX Panel
BMV60XXX series for Color Control GX Panel
Phoenix inverter 12V 24V 48V 250W-500W to Color Control GX Panel
The VE.Direct cables are not included in the scope of delivery of these device series and are available in lengths of 0.3 to 10m.
Scope of delivery:
1x Victron Ass030530218 1.8m Ve.direct Cable
ASS030572050
Victron 5m RS485 for USB Interface Cable
The 5m USB to RS485 Interface Cable from Victron Energy (MPN AS030571050) for combining energy meters ET112 or ET340 to the system control monitor Color Control GX or the system monitoring Venus GX.
Length: 5m
Occupation of the cables
RS485 Converter / Strom counter ET112 and ET340
Yellow (data) / Terminal 5
Orange (data+) / Terminal 4
Black (GND) /Terminal 6
The red, green and brown wire that comes from the USB to the RS485 cable is not used.
Scope of delivery:
1x Victron Energy Ass030571050 5M USB to RS485 Interface
data sheet
Weight
0.195 kg
Manufacturer
Victron Energy
guarantee
5 years of manufacturer's guarantee
Product
Assembly accessories
ASS030530209
Victron 0.9m Ve.direct cable connection cable
The 0.9m Ve.direct Cable from Victron (ASS030530209) is required to combine devices that are supposed to communicate via the VE-Direct Port. For example, the Bluesolar controller and the MPPT Control remote control panel.
The following connections can be established:
Victron Bluesolar Mppt controller to Victron Color Control GX Panel
Victron Bluesolar Mppt controller to Mppt Control remote control unit unit BMV70XXX series for Color Control GX Panel
BMV60XXX series for Color Control GX Panel
Phoenix inverter 12V 24V 48V 250W-500W to Color Control GX Panel
The VE.Direct cables are not included in the scope of delivery of these device series and are available in lengths of 0.3 to 10m.
Scope of delivery:
1x Victron Ass030530209 0.9m Ve.direct Cable
ASS030530010
Victron Ve.direct to USB Interface Cable
The Victron Ve.direct to USB Interface (MPN AS030530010) is needed to pair VICTRON devices with VE.Direct connection via USB with the notebook or computer.
In this way you can conveniently evaluate performance data on the computer and configure the devices using a free software.
Which Victron devices are equipped with a VE.Direct connection?
• Bluesolar Mppt controller
• BMV battery monitors 700 + 702 Black
• Victron Phoenix Ve.direct voltage converter
• Color Control GX System Monitor
• Lithium Peak Power Packs
Scope of delivery:
1x Victron Ass030530010 VE.Direct to USB Interface
1x short guide
data sheet
Generally
Manufacturer
Victron Energy
EAN
8719076019589
ASS030710018
Victron Ve.CAN to CAN-BUS BMS Type A cable 1.8m
You need this Ve.CAN to CAN BUS-BMS cable from Victron (MPN AS030710018) to connect a Victron GX device to a CAN bus-compatible battery that is not from Victron. The cable, with a length of 1.8m, corresponds to type A, which can be used for the following batteries:
BYD B-Box
Pylontech US2000C / US3000C / Force-L
installation
The page called "CAN-BUS BMS" is inserted into the battery. The other side with the name "Ve.can" must either be connected to the Ve.CAN port of the GX device or to the BMS-CAN port become. Both types of a GX device can be configured for use with a third-party CAN bus battery connected to a BMS. Information about the configuration can be found in the manual for the battery you use.
Scope of delivery:
1x Victron Ve.CAN to CAN-BUS BMS Type A Cable 1.8m (ASS030710018)
data sheet
Manufacturer
Victron Energy
Dimensions (LXBXH)
30 x 180 x 170 mm
Manufacturer part number
Ass030710018
EAN
8719076043317
ASS030572018
Victron 1.8m RS485 for USB Interface Cable
The 1.8m USB to RS485 Interface Cable from Victron Energy (MPN AS030571018) for the connection of energy meters ET112 or ET340 to the system control monitor Color Control GX or the system monitoring Venus GX.
Length: 1.8m
Occupation of the cables
RS485 Converter / Strom counter ET112 and ET340
Yellow (data) / Terminal 5
Orange (data+) / Terminal 4
Black (GND) /Terminal 6
The red, green and brown wire that comes from the USB to the RS485 cable is not used.
Scope of delivery:
1x Victron Energy Ass030571018 1.8m USB to RS485 Interface
data sheet
Ambient temperature
-30c - +60c
Weight
0.08 kg
Manufacturer
Victron Energy
guarantee
5 years of manufacturer's guarantee
Product
Assembly accessories
ASS030710050
Victron Ve.CAN to CAN-BUS BMS type a cable 5m
This Ve.CAN to CAN Bus-BMS cable from Victron (MPN AS030710050) you need to connect a Victron GX device to connect a CAN bus-compatible battery. The cable, with a length of 5m, corresponds to type A, which can be used for the following batteries:
BYD B-Box
Pylontech US2000C / US3000C / Force-L
installation
The page called "CAN-BUS BMS" is inserted into the battery. The other side with the name "Ve.can" must either be connected to the Ve.CAN port of the GX device or to the BMS-CAN port become. Both types of a GX device can be configured for use with a third-party CAN bus battery connected to a BMS. Information about the configuration can be found in the manual for the battery you use.
Scope of delivery:
1x Victron Ve.CAN to CAN-BUS BMS type a cable 5m (ASS030710050)
8-01-010680
Offgridtec® 1M battery cable 50mm² on both sides M8 eyelets
Robust and versatile battery connection cable
The cable is suitable for connecting a battery with M8 round poles to a device that also has an M8 screw terminal. These include the following device classes:
Victron Energy Phoenix inverter
Victron Energy inverter / charger station wagon
All other devices such as charge controllers, inverters or battery chargers, which have an M8 shaft terminal and are to be connected to a battery with the same terminal
Characteristics
Length: 1m
Connections: M8 -> M8
Line cross -section: 50mm²
Certer color: red / black
Suitable for laying in dry and damp rooms, as well as vehicles
Suitable for applications with medium mechanical stress
Oil, cold and UV-resistant, flamed
Note and accessories recommendation
To choose the correct connection cable, always note instructions in the instructions to be connected to the device to be connected. The cable cross -section must be selected so that the power loss is max. 2%.
Scope of delivery:
Battery connection cable 50mm² - 2 single wires red / black 1m
ASS030530230
Victron 3m VE.Direct cable connection cable
The 3m VE.Direct Cable from Victron (ASS030530230) is required to connect devices that are to communicate with each other via the VE Direct port. For example the BlueSolar controllers and the MPPT Control remote control panel.
The following connections can be made with it:
Victron BlueSolar MPPT Controller to Victron Color Control GX Panel
Victron BlueSolar MPPT controller for MPPT Control remote control unit BMV70xxx series for Color Control GX panel
BMV60xxx Series to Color Control GX Panel
Phoenix Inverter 12V 24V 48V 250W-500W to Color Control GX Panel
The VE.Direct cables are not included in the scope of delivery of these device series and are available in lengths from 0.3 to 10m.
Scope of delivery:
1x Victron ASS030530230 3m VE.Direct Cable
ASS030530250
Victron 5m VE.Direct cable Verbindungskabel
The 5m Ve.direct Cable from Victron (ASS030530250) is required to combine devices that are supposed to communicate via the VE-Direct Port. For example, the Bluesolar controller and the MPPT Control remote control panel.
The following connections can be established:
Victron Bluesolar Mppt controller to Victron Color Control GX Panel
Victron Bluesolar Mppt controller to Mppt Control remote control unit unit BMV70XXX series for Color Control GX Panel
BMV60XXX series for Color Control GX Panel
Phoenix inverter 12V 24V 48V 250W-500W to Color Control GX Panel
The VE.Direct cables are not included in the scope of delivery of these device series and are available in lengths of 0.3 to 10m.
Scope of delivery:
1x Victron Ass030530250 5M VE.Direct Cable
ASS030064980
Victron RJ45 UTP Cable for VE.Bus, VE.CAN, VE.Net, and VE9bitRS485 Communication 3m
Victron RJ45 Kabel für VE.Bus, VE.Can, VE.Net und VE9BitRS485
Das Victron RJ45 UTP ist verwendbar mit den Victron Kommunikations-Ports VE.Bus, VE.CAN, VE.Net und VE9bitRS485 und dient der Vernetzung von Victron Produkten mit entsprechenden Fähigkeiten. Es ist in verschiedenen Längen von 0,3m bis 30m lieferbar. Unten sehen Sie eine Auflistung aller verfügbaren Längen.
0,3m Victron MPN ASS0300649000,9m Victron MPN ASS0300649201,8m Victron MPN ASS0300649503m Victron MPN ASS0300649805m Victron MPN ASS03006500010m Victron MPN ASS03006501015m Victron MPN ASS03006502020m Victron MPN ASS03006503025m Victron MPN ASS03006504030m Victron MPN ASS030065050
Variants from €8.81*
ASS030720050
Victron Ve.CAN to CAN-BUS BMS Type B cable 5m
This Ve.CAN to CAN Bus-BMS cable from Victron (MPN AS030720050) you need to connect a Victron GX device to connect a CAN bus-compatible battery. The cable, with a length of 5m, corresponds to type B, which can be used for the following batteries:
LG Chem Resu
Axistorage
BMZ
Pylontech US2000 / US3000 / UP2500
installation
The page called "CAN-BUS BMS" is inserted into the battery. The other side with the name "Ve.can" must either be connected to the Ve.CAN port of the GX device or to the BMS-CAN port become. Both types of a GX device can be configured for use with a third-party CAN bus battery connected to a BMS. Information about the configuration can be found in the manual for the battery you use.
Scope of delivery:
1x Victron Ve.CAN to CAN-BUS BMS Type B cable 5m (ASS030720050)
ASS030720018
Victron Ve.CAN to CAN-BUS BMS Type B cable 1.8m
You need this Ve.CAN to CAN BUS-BMS cable from Victron (MPN AS030720018) to connect a Victron GX device to a CAN bus-compatible battery that is not from Victron. The cable, with a length of 1.8m, corresponds to type B, which can be used for the following batteries:
LG Chem Resu
Axistorage
BMZ
Pylontech US2000 / US3000 / UP2500
installation
The page called "CAN-BUS BMS" is inserted into the battery. The other side with the name "Ve.can" must either be connected to the Ve.CAN port of the GX device or to the BMS-CAN port become. Both types of a GX device can be configured for use with a third-party CAN bus battery connected to a BMS. Information about the configuration can be found in the manual for the battery you use.
Scope of delivery:
1x Victron Ve.CAN to CAN-BUS BMS Type B cable 1.8m (ASS030720018)
ASS030530310
Victron 10m Ve.direct Cable connecting cable
The 10m VE.Direct Cable from Victron (ASS030530310) is required to combine devices that are supposed to communicate via the VE-Direct Port. For example, the Bluesolar controller and the MPPT Control remote control panel.
The following connections can be established:
Victron Bluesolar Mppt controller to Victron Color Control GX Panel
Victron Bluesolar Mppt controller to Mppt Control remote control unit BMV70XXX series for Color Control GX Panel
BMV60XXX series for Color Control GX Panel
Phoenix inverter 12V 24V 48V 250W-500W to Color Control GX Panel
The VE.Direct cables are not included in the scope of delivery of these device series and are available in lengths of 0.3 to 10m.
Scope of delivery:
1x Victron Ass030530310 10M VE.Direct Cable
SHP301602000
Victron stainless steel built-in socket boat camper yacht shore connection 16A
The Victron shore power socket SHP301602000R 16A was specially developed for the boat and mobile home sector. This model features a high quality stainless steel bezel and is compatible with all Victron shore power cables.
Technical characteristics:
Degree of protection: IP 57
Facing Material: Stainless steel
Weight: 0.34kg
max voltage: 250V AC
max current: 16A
Standard: IEC 60309, 2p+E
Type coverage: PA6
Scope of delivery:
1x Victron SHP301602000R shore power socket 16A 250V stainless steel
Delivery time: 1-3 working days
8-01-004610
Cable set 2007 Schaudt EBL to charge controller connection cable 1m
For connecting all common charge controllers to an existing Schaudt Elektroblock (EBL).
Properties
Length: 1m Cable cross-section: 4mm² for all common charge controllers
Scope of delivery1 x EBL connection cable 1m
ADA010100100
Victron 2m AC Connection Cable CEE 7/7 for Smart IP43 Charger
Das 2m Schuko Kabel von Victron wird unter anderem zur Verbindung von IP43 Phoenix Ladegeräten benötigt.Die Schuko Kabel sind nicht im Lieferumfang dieser Geräte-Serien enthalten.Lieferumfang:1x Victron ADA010100100 Schuko 2 Meter Kabel
ASS300420100
Victron Zigbee to RS485 Converter
Schnittstellenumsetzer von RS485 zu Zigbee Funkübertragung (Sendeeinheit)
Funkübertragung von Energymeter mit RS485 Schnittstelle (zB EM540) zur Victron GX Steuereinheit (Empfangsteil ASS300420200 zusätzlich nötig)
Reichweite: max. 1600m
Lieferumfang:
– Schnittstellenwandler im Aluminiumgehäuse
– RS485 Anschlusskabel mit Stecker
– Stabantenne, schwenkbar
– 230V Netzteil zu 12V DC