Installation
8-01-006280
Lapp oil flex © Solar XLS -R T 2x6 BK/RD - Lose
Oilflex © Solar XLS -R T BK/RD solar cable - essential product features:
1. Oilflex® Solar XLS-R T are halogen-free, double-insulated and networked twin lines for constant use outdoors. These lines are used for photovoltaic system construction to wire the individual solar modules with each other and for wiring with the inverter
2. Building data --- conductor: Fine-wound strands made of tinned Cu wires, in accordance with IEC 60228, class 5 --- vein isolation: temperature-resistant and halogen-free co-polyolefin, radiation-networked Pair colors: black/red --- outdoor coat: external and halfogen-free Co-polymer, radiation networked outer coat color: black
3. Special features for the networked compound are in addition to the extended temperature range, very good values regarding UV, ozone and weather resistance as well as abrasion resistance. They are used to wire solar modules with each other, as well as to connect the individual module series and the inverter.
The specified price applies per ongoing meter!
Electrical Properties
Nominal voltage U0/U according to VDE: AC 600/1000 V/DC 900/1500 V
Highly permissible DC voltage: 1.8 KV DC (head/conductor, non -grounded system)
Test voltage AC 6.5 kV voltage strength tests according to EN 50395
Thermal properties
Temperature range fixed: -40 ° C to +100 ° C max.
Short -circuit temperature +200 ° C
Flexible laying temperature: max. -25 ° C
Themic lifespan in accordance with EN 60216-2
Heat pressure resistance in accordance with EN 60811-3-1
Wet heat test according to EN 60068-2-78 with 85% humidity
Mechanical properties
Minimum bending radius occasionally moved: 15 x cable diameter
Set: 5 x cable diameter
Dynamic penetration: according to the requirement profile AK 411.2.3 Appendix F
Further tearing resistance: according to the requirement profile AK 411.2.3 Appendix G
Examination of the isolation and mantle break resistance as well as stretching: in accordance with EN 60811
Chemical properties
Ozone resistance: in accordance with EN 50396 Part 8.1.3 Procedure B
Weather / UV resistance according to HD 605 / A1
Fire behavior flamed according to IEC 60332-1-2
Halogen freedom according to IEC 60754-1
Acid and lye resistance in accordance with EN 60811-2-1 (oxalic acid and sodium hydroxide solution)
EC guidelines
The lines are compliant to the EC guidelines 2006/95/EC (Lower Voltage Directive) and 2002/95/EG and 2011/65/EG (Rohs, restriction of the use of certain dangerous substances).
Laying in the ground
Solar lines can generally be laid in the ground in the ground for laying the earth if it is ensured that there is no permanent contact with water and waterlogging is removed safely. The laying of the lines and correct execution of the cable ditch must correspond to VDE 0100 part 520 or comparable standards.
data sheet
Generally
item number
8-01-006280
Manufacturer part number
0023986
Product
Solar cable
Manufacturer
Lapp cable
Characteristics
Fire behavior (flamed according to IEC 60332-1-2)
material
copper
Area of operating environmental temperature
Stated: -40 ° C to +100 ° C max.
Leadership
Class 5 / IEC 60228 Cl.5
Copper content
115.2kg/km
Ladder cross -section (mm²)
6 mm²
Test voltage
AC 6500 V
Wire colors
Black red
Number of veins
2
classification
EIM 5.0 Class description: Flexible line, EIM 5.0 Class ID: EC001578
Dimensions (LXBXH)
(WXH) 11.9 x 5.8 mm
Weight
174kg/km
EAN
0797337909983
2H-FURD-397Z
MC4 connector pair - socket + plug 4-6mm² type 4 PV-KBT4/6I
This economy set consists of a male and a female MC4 connector with the respective inner workings. These are original MC4 connectors from Stäubli
Technical data
Touch protection, unplugged IP2X
degree of protection, plugged in IP67
Temperature range -40° ...90° C
Insulation material PA
Snap-in locking system
Cable strain relief according to IEC 61984 (06.2001)
Contact system MC contact lamellas
Contact material copper, tinned
flame class UL94-V0
Protection class II
system voltage up to 1000V
Rated current up to 30A
8-01-006295
Lapp ÖLFLEX© H1Z2Z2-K 1X6 WH/BK loose as running meters
ÖLFLEX® SOLAR XLR-R cables are weather, abrasion and UV-resistant photovoltaic cables. These halogen-free, double-insulated and cross-linked solar cables are suitable for permanent outdoor use to connect grounded and ungrounded photovoltaic systems. They are used both for wiring solar modules to one another and for connecting the individual rows of modules and the inverter. The cable has been tested by TÜV Rheinland according to 2 PfG 1169/08.2007 (PV1-F) type.
Important product features:
Cable cross section: 6mm
Manufacturer: Lapp Kabel
Outer insulation color: black
Insulation color: white
XLR-R solar cables from Lapp can basically be laid in protective pipes suitable for burial in the ground if it is ensured that there is no permanent contact with water and waterlogging is safely drained away. The laying of the cables in the ground and the correct design of the cable trench must comply with VDE 0100 Part 520 or comparable standards in order to prevent damage to the protective tube and permanent exposure of the cables and lines to penetrating water. Long-term, permanent storage and permanent operation of the lines in or under water is not permitted.
Construction of conductors
1. Conductor: Fine-wire strand made of tinned copper wires, according to IEC 60228, class 5
2. Wire insulation: electron beam cross-linked polyolefin co-polymer
3. Outer jacket Electron beam crosslinked polyolefin co-polymer outer jacket color: black or black with red or blue stripes
Electrical properties
Rated voltage: U0 /U according to IEC AC 600/1000 V DC 900/1500 V
Max. Permissible system voltage: 1.8 kV DC (conductor/conductor, non-earthed system) according to TÜV 2 PfG 1169/08.2007 Test voltage AC 6.5 kV
Thermal properties
Temperature range fixed: -40° C to +120° C max. conductor temperature (according to EN 60216- 2)
Temperature range according to: -40 °C to +90 °C ambient temperature TÜV 2 PfG 1169/08.2007
Flexible laying temperature: max. -25 °C
Heat pressure resistance according to EN 60811-3-1
Damp-heat test according to EN 60068-2-78 at 85% humidity
Mechanical properties
Minimum bending radius occasionally moved: 15 x cable diameter
fixed: 5 x cable diameter
Dynamic penetration according to DKE requirement profile PV1-F AK 411.2.3 Appendix F
Tear propagation resistance according to DKE requirement profile PV1-F AK 4112.3 Appendix G
Tear strength and elongation test according to EN 60811
Chemical properties
Weather / UV resistance according to HD 605/A1
Ozone resistance according to EN 50396
Halogen-free according to EN 50267
Fire behavior flame-retardant according to IEC 60332-1-2
Acid and alkali resistance according to EN 60811-2-1 (oxalic acid and caustic soda)
Price refers to 1 running meter.
Delivery time: 1-3 working days
.
CIP137250010
Victron 58V 48V 125A-300A Megafuse Fuses 250A
Victron 58V Megafuse type fuse for protecting 48V devices. There are 4 power classes available: 125A, 200A. 225A or 300A are available.
These fuses are ideal for reliably protecting large 48V inverters or charge controllers.
selectable sizes and the most important technical parameters
125A 58V / 48V DC, Victron CIP137125010
200A 58V / 48V DC, Victron CIP137200010
225A 58V / 48V DC, Victron CIP137250010
300A 58V / 48V DC, Victron CIP137300010
Suitable busbars if there is more than one safety circuit
For the modular fuse holder, there are also 2 busbars available for expansion, which you can use to protect up to 6 high-current circuits individually via a busbar:
Victron Busbar 5, CIP100400060 - for max. 500A and 5 modular fuse holders
Victron Busbar 6, CIP100400070 - for max. 1500A and 6 modular fuse holders
Scope of delivery:
1x Victron 58V / 48V DC mega fuse of your choice
LYN020102000
Victron lynx power in
The Victron Lynx Power in-module (MPN LYN020102000) is used to connect batteries via an external backup. This can be useful if you have several parallel strings. Due to the extremely high short -circuit current potential of most batteries, it is recommended to use an external safety system with a suitable error vacuum assessment (e.g. an NH HRC).
Properties of the Victron Lynx Power in
1000a
Negative and positive DC collecting rail
easy installation
Part of the modular Lynx distribution system
Construction
The power in module contains a negative and a positive DC collection rail with M8 screws to connect the battery cables. Cables with a diameter of up to 22mm can be guided through the lower introductions and over the two side connections.
Scope of delivery:
1x victron lynx power in
LYN060102000
Victron Lynx distributor
The Victron Lynx Distributor (MPN Lyn060102000) is a modular DC collection rail with devices for four DC fuses. It monitors the status of each backup and shows its respective conditions via an LED on the front. The Lynx distributor contains a positive and a negative collective rail and offers a connection for 4 individual DC devices, loads or DC groups. It offers space for individual DC fuses per DC group.
Properties of the Victron Lynx distributor
Connection for four individual DC devices, loads or groups
Positive and negative collective track
Mega fuses
easy installation
Part of the modular Lynx distribution system
Security indicator LEDs
If you want to use the security indicator LEDs on the Lynx distributor, a connection to a Lynx Shunt is also required. The Lynx Shunt contains the required width of input current supply (8V-70V DC) in order to output the required 5V (4.5-5.5V) electricity requirements of the Lynx distributor conductor plate. The RJ11 cable required for connection is included. The Lynx Shunt has two ports, both of which can be used.
With full functionality, only the central LED shines green. If a fuse is burned (or missing), the LEDs of the central and security cycle shine red. If you do not use all connection points in your DC distribution, reactive fuses may need to be attached to delete the red LEDs.
Fuses
The Lynx distributor uses mega fuses. Please note that some mega fuses are only designed for 36V (suitable for 24V systems). For 48V systems, backups with a nominal voltage of 58/64V must be used.
Scope of delivery:
1x victron lynx distributor
data sheet
Weight
2.2 kg
Manufacturer
Victron Energy
Dimensions (LXBXH)
288 x 170 x 77.5 mm
Manufacturer part number
Lyn060102000
EAN
8719076022633
1x RJ11 cable
VBS127010010
Victron Battery Switch on/Off 275a Battery main switch
The battery switch is intended for permanent current and is suitable for battery systems up to 48 V. It has a unique ergonomic and aesthetic button for easy operation.
use
With the battery switch, a battery of DC loads and/or DC load sources can be separated. It serves to maintain the battery charge for unattended systems, for system maintenance or in emergencies. With the battery switch, the house battery can also be switched in parallel to the starter battery to supplement a unloaded starter battery or a discharged house battery in an emergency.
installation
The battery switch offers both a surface and back wall assembly and is therefore flexible when installing. It has 4 easily removable side parts for cable access. It is supplied with 16 different label stickers for the individual design of the battery switch.
Security
The button is removable for insulation or security purposes. The battery switch corresponds to the ISO8846 Zuf protection standard and is suitable for use in a machine room.
Max. Permanent current 275 a
1-minute introduction 455 a
Nominal value Home 1250 a
Nominal voltage 48 V
Material of the clamps tinned copper
Material of the hexagon nut Tinned copper
Diameter of the clamp 3/8 inches / 9.53 mm
Recommended torque 70 LBF · Inch / 8 N · M
Base material glass fiber reinforced nylon
Weight 0.4 LB / 0.2 kg
Dimensions (L x W x H) 2.7 x 3.0 x 2.7 inches 69.5 x 76.3 x 69.5 mm
Assembly surface or back wall assembly
ISO8846 / SAE J1171
8-04-006830
Lapp H07RN-F High-End Rubber Cable Single Core 16mm
H07RN-F 1xcore (heavy standard design, corresponds to HAR) is a heavy rubber connection and control cable with a wide range of possible areas of application. Our H07RN-F from Lapp is ideal for use outdoors or in damp rooms and is often used by industry and agriculture.
important product properties at a glance
heavy standard version flame-retardant according to IEC 60332-1-2 Oil resistant according to EN 60811-404 cold resistant UV-resistant Example applications:
Construction site extension cable Extension cord for outdoors Applications with medium, mechanical stress (industrial, agricultural use) Handsets and power supplies according to HD 516/ VDE 0298-300 Dry and damp rooms as well as outdoors (taking into account all normative cable properties) according to HD 516/ VDE 0298-300 To use
for mechanically more demanding applications in the commercial and private sector max. 1000 V AC protected + fixed Arrangements of single-core rubber hose lines H07RN-F can be used for short-circuit and earth-fault-proof laying according to IEC 60364-5-52/ HD 60364-5-52/ VDE 0100 Part 520 Construction
Bare copper strands according to HAR standard Core insulation: rubber compound type EI 4 Outer sheath: rubber compound type EM 2 Standard references / approvals
H07RN-F type certification according to EN 50525-2-21 product properties Flame-retardant according to IEC 60332-1-2 Oil-resistant according to EN 60811-404 Lappkabel is one of the world's leading manufacturers of cables for a wide variety of areas. The company from Germany produces its high-tech cables in several plants in Germany under the strictest quality controls.
Variants from €0.94*
ASS030530218
Victron 1.8m Ve.direct cable connection cable
The 1.80m VE.Direct Cable from Victron (ASS030530218) is required to combine devices that are supposed to communicate via the VE-Direct Port. For example, the Bluesolar controller and the MPPT Control remote control panel.
The following connections can be established:
Victron Bluesolar Mppt controller to Victron Color Control GX Panel
Victron Bluesolar Mppt controller to Mppt Control remote control unit unit BMV70XXX series for Color Control GX Panel
BMV60XXX series for Color Control GX Panel
Phoenix inverter 12V 24V 48V 250W-500W to Color Control GX Panel
The VE.Direct cables are not included in the scope of delivery of these device series and are available in lengths of 0.3 to 10m.
Scope of delivery:
1x Victron Ass030530218 1.8m Ve.direct Cable
ASS030572050
Victron 5m RS485 for USB Interface Cable
The 5m USB to RS485 Interface Cable from Victron Energy (MPN AS030571050) for combining energy meters ET112 or ET340 to the system control monitor Color Control GX or the system monitoring Venus GX.
Length: 5m
Occupation of the cables
RS485 Converter / Strom counter ET112 and ET340
Yellow (data) / Terminal 5
Orange (data+) / Terminal 4
Black (GND) /Terminal 6
The red, green and brown wire that comes from the USB to the RS485 cable is not used.
Scope of delivery:
1x Victron Energy Ass030571050 5M USB to RS485 Interface
data sheet
Weight
0.195 kg
Manufacturer
Victron Energy
guarantee
5 years of manufacturer's guarantee
Product
Assembly accessories
8-01-012970-005
Offgridtec MEGA Fuse 70V for 48V Systems 200A
MEGA-Sicherungen für Spannungen bis maximal 70V für 48V Systeme. Ideal für die Verwendung als Sicherung am Batteriekabel von Spannungswandlern und Wechselrichtern oder auch Ladereglern mit hohen Ladeströmen.1 Set besteht aus 5 SicherungenFolgende Sicherungsgrößen sind verfügbar:
60A
80A
100A
125A
200A
250A
300A
Lieferumfang:1x 5er-Set MEGA-Sicherung
ASS030530209
Victron 0.9m Ve.direct cable connection cable
The 0.9m Ve.direct Cable from Victron (ASS030530209) is required to combine devices that are supposed to communicate via the VE-Direct Port. For example, the Bluesolar controller and the MPPT Control remote control panel.
The following connections can be established:
Victron Bluesolar Mppt controller to Victron Color Control GX Panel
Victron Bluesolar Mppt controller to Mppt Control remote control unit unit BMV70XXX series for Color Control GX Panel
BMV60XXX series for Color Control GX Panel
Phoenix inverter 12V 24V 48V 250W-500W to Color Control GX Panel
The VE.Direct cables are not included in the scope of delivery of these device series and are available in lengths of 0.3 to 10m.
Scope of delivery:
1x Victron Ass030530209 0.9m Ve.direct Cable
ASS030530010
Victron Ve.direct to USB Interface Cable
The Victron Ve.direct to USB Interface (MPN AS030530010) is needed to pair VICTRON devices with VE.Direct connection via USB with the notebook or computer.
In this way you can conveniently evaluate performance data on the computer and configure the devices using a free software.
Which Victron devices are equipped with a VE.Direct connection?
• Bluesolar Mppt controller
• BMV battery monitors 700 + 702 Black
• Victron Phoenix Ve.direct voltage converter
• Color Control GX System Monitor
• Lithium Peak Power Packs
Scope of delivery:
1x Victron Ass030530010 VE.Direct to USB Interface
1x short guide
data sheet
Generally
Manufacturer
Victron Energy
EAN
8719076019589
ASS030710018
Victron Ve.CAN to CAN-BUS BMS Type A cable 1.8m
You need this Ve.CAN to CAN BUS-BMS cable from Victron (MPN AS030710018) to connect a Victron GX device to a CAN bus-compatible battery that is not from Victron. The cable, with a length of 1.8m, corresponds to type A, which can be used for the following batteries:
BYD B-Box
Pylontech US2000C / US3000C / Force-L
installation
The page called "CAN-BUS BMS" is inserted into the battery. The other side with the name "Ve.can" must either be connected to the Ve.CAN port of the GX device or to the BMS-CAN port become. Both types of a GX device can be configured for use with a third-party CAN bus battery connected to a BMS. Information about the configuration can be found in the manual for the battery you use.
Scope of delivery:
1x Victron Ve.CAN to CAN-BUS BMS Type A Cable 1.8m (ASS030710018)
data sheet
Manufacturer
Victron Energy
Dimensions (LXBXH)
30 x 180 x 170 mm
Manufacturer part number
Ass030710018
EAN
8719076043317
ASS030572018
Victron 1.8m RS485 for USB Interface Cable
The 1.8m USB to RS485 Interface Cable from Victron Energy (MPN AS030571018) for the connection of energy meters ET112 or ET340 to the system control monitor Color Control GX or the system monitoring Venus GX.
Length: 1.8m
Occupation of the cables
RS485 Converter / Strom counter ET112 and ET340
Yellow (data) / Terminal 5
Orange (data+) / Terminal 4
Black (GND) /Terminal 6
The red, green and brown wire that comes from the USB to the RS485 cable is not used.
Scope of delivery:
1x Victron Energy Ass030571018 1.8m USB to RS485 Interface
data sheet
Ambient temperature
-30c - +60c
Weight
0.08 kg
Manufacturer
Victron Energy
guarantee
5 years of manufacturer's guarantee
Product
Assembly accessories
000-000-002
Solar Plug Branch Sockets Y-Connector (Pair)
Diese Abzweigbuchsen benötigen Sie, um mehrere Solarmodule miteinander zu verbinden. Durch die parallele Schaltung der Solarpanels erreichen Sie gleich bleibende Spannung. Ideal für 12V Systeme oder die Verkablung von Dünnschichtmodulen.Eigenschaften
1 Paar Y-Stecker zum parallelen Verschalten von 2 Solarmodulen
Easy-Klick System / Snap-In-Verriegelung - Schutzklasse IP67 im verriegelten Zustand
für Kabel mit einem Querschnitt von 4mm²-6mm²
Für Spannungen bis max. 1000V DC geeignet
Für die Verwendung im Freien geeignet (gesteckt IP67)
Kompatibel mit handelsüblichen Solar Steckverbindern
CIP000100001
Victron high-load security holder with lid for mega-fuse / AMG fuses
The MEGA-FUSE fuse holder from Victron Energy (MPN CIP000100001) with a lid is used to secure DC MEGA-FUSE. The housing offers solid protection against outer influences.
Important article features at a glance:
500A max. Electricity at max. 32V DC
300A max. Electricity at 58V DC
For fuses of the Mega-Fuse type
Material: high-strength plastic mixture
Corresponds to IEC 60947-3: 1999 + A1: 2001 + A2: 2005 in connection with IEC 60947-1: 2004
Via the MEGA strip protection:
Fuels of the MEGA-FUSE fuse are the patrol fuses and are screwed to the holder to ensure optimal contact. Corresponding nuts and sprinkling rings are already pre -assembled on the holder.
With mega fuses, up to 500a can be secured at 32V DC. Up to 300a are possible for the 58V variants.
32V mega -fuse fuses - all sizes up to max. 500a
58V mega -fuse fuses - all sizes up to max. 300a
Scope of delivery:1x Victron CIP000100001 MEGA-FUSE Fuse holder
BS6006
Blue Sea BS 6006 300A battery main switch m series red
m Series - Battery master switch - For small on-board systems, outboard motors and small built-in machines
- Connections made of tinned copper - best contact and maximum corrosion resistance
- 22mm long terminal bolts suitable for M10 ring cable lugs
- Stable, closed-back plastic housing with three slide-in side panels enables cables to be routed from different directions.
- Suitable for surface mounting, installation and countersunk mounting in control panels
- Rotary knob can be pulled off in the off position
- Protection class IP66
- Switching function: ON / OFF
- Peak current (30s): 900A
- Short term load (5 min): 500A
- Continuous load: 300A
- Voltage range up to: 48V DC
- switch positions: 2
Delivery time: 1-3 working days
CIP100200100
Victron Mega-Fuse Security Modular
The modular mega-fuse security holder of Victron Energy (MPN CIP100200100) With a lid, the secure installation of DC Mega-Fuse patrol fuses is used together with up to 5 other shears on a common bus bar. This solution is ideal for securing parallel multiplus or quattro interverters or inverter from other manufacturers. The safety holders can be put together so that all security holders are firmly anchored in their position on the bus bar. (see image material)
The housing offers solid protection against outer influences. There are currently two bus bar versions that can be used with the modular holder:
Victron Busbar 5 CIP100400060 - for 5 CIP100200100, max 500aVictron Busbar 6 CIP100400070 - for 6 CIP100200100, max 2000a holder
Important article features at a glance:
500A max. Electricity at max. 32V DC
300A max. Electricity at 58V DC
For the joint use with the 5 and 6 bus bar from Victron Energy
For fuses of the Mega-Fuse type
Material: high-strength plastic mixture
About the mega fuse
Fuels of the MEGA-FUSE fuse are the patrol fuses and are screwed to the holder to ensure optimal contact. Corresponding nuts and sprinkling rings are already pre -assembled on the holder.
With mega fuses, up to 500a can be secured at 32V DC. Up to 300a are possible for the 58V variants.
32V mega-fuse fuses-60a to 500a58V mega-fuse fuses-125a to 300a
Scope of delivery:1x Victron CIP100200100 Modular Mega-Fuse Security Halter
data sheet
Generally
item number
8-67-010055
Manufacturer part number
CIP100200100
Manufacturer
Victron Energy
Weight
0,1
EAN
8719076018124