Inverters

The VOTRONIC Mobilpower SMI 1700 Sinus ST-NVS inverter 12 V DC / 230 V AC is used for use in special vehicles, high-quality motorhomes and other areas in which high quality and reliability are required. It is designed for high permanent loads and permanently does 1700W and up to 3000W short -term peak output for coping with high starting currents. ST-NVS with integrated network transfer A special highlight of the SMI ST-NVS series is the integrated network preliminary circuit. Thanks to it, your electricity system automatically receives its energy from the network when the power grid is connected and thus protects the batteries. If no network current is available, the device automatically switches to battery operation. The exact behavior of the NVS is flexible so that different configurations can be implemented as required. Technical highlights of the Mobilpower SMI 1700 ST-NVS Inverters delivers output current with mains voltage quality (pure sinus) 1700 watts of continuous power, designed for 12V battery voltage) Only 10W self-consumption in the switched on condition without load and only 5 watts consumption in standby mode Compromise and problem-free, trouble-free operation of all network-powered devices, e.g. medical devices, radio, charging (cell phone, radio, hand lamps, batteries, etc.), laptop, PC, air conditioning, cooling boxes, power tools (drill, angle grinder, etc.), TV, satellite , TFT, microwave, fully automatic coffee machine, hairdryer, fan, lights, vacuum cleaners, fridge etc. The control panel can be rotated by 360 ° on the device and can also be placed freely as an external remote control in the vehicle Switch-Mode technology, compact, light, robust and reliable, briefly overloadable Low power consumption, selectable power saving mode: continuous operation or automatic standby with automatic search for the switched-on consumers or from Automatic shutdown with battery-over/undervoltage, overload, overheating etc. Performance and temperature-controlled comfort-cool fan with stepless speed control High efficiency of over 93% Made according to the latest standards and equipped with resilient power electronics that it will not let down for many years. The SMI 1700 ST-NVS: Modern inverter technology from Germany The devices work according to the latest technology in a striking version ("Switch Mode" "). A compact design could be realized by microprocessor control in conjunction with modern SMD technology. Noise and friction-optimized light run fans (speed-controlled) ensure perfect cooling and therefore problem-free continuous operation even with full power. Integrated protective circuits also monitor the thermal and electrical load as well as overload and short circuits of the output circuit. The inverters have an intelligent power saving control with automatic switch -off. It ensures that no more electricity is consumed during idling than absolutely necessary. To protect the batteries, undervoltage protection is integrated, which switches off the inverter when the battery is sunk. Flexible installation of the inverter display panel possible In order to optimally place the inverter, the display panel can be removed after removing the two fastening screws and reinstated in the desired position (rotatable in 90 ° steps) and screwed. If the inverter is installed at a difficult to access, the display panel can also be used as a remote control. To do this, the control panel is removed from the device, the 5 m long control line connected again to the device and mounted at the desired point. Optionally, additional remote control can also be connected if you want an display directly on the device and in the board area. Scope of delivery: 1x Votronic 3184 SMI 1700 ST-NVS 12V 230V Mobilepower Inverter 5m connection cable for controls, battery connection terminals, power cord, 1x connection scheme, operating instructions Also available in boats with the electronics protected from moisture!   Technical specifications:  Battery native voltage (DC) in [V] 12  Output voltage (AC) in [V] 230 pure sinus  Output frequency 50 Hz quartz stabilized  Efficiency > 93 %  Cosphi of the consumer everything allowed  Output power duration in [w] 1700  Output power short / tip in [W] 2100 / 3000  Minimum battery capacity (recommended) in [AH] > 150  Electricity intake (DC) with nominal output in [a] 165  Battery overvoltage max. [V] 16  Battery sub voltage min. In [V] 10,5  Self -consumption in [W] 10 (switched on, without load)  Self -consumption in standby in [W] 5 (without load)  Battery connection terminals in [mm2] 2 x 50  Temperature range [° C] -20 to +45  Protection level/class IP 21  Dimensions (WXHXT) in [mm] - dimensions including fastening flanges, without connections 265 x 90 x 440  Weight in [g] 5200  Standards (CE) EN 60950  Ambient conditions, humidity: max. 95% room moisture, not condensing  Scope of delivery: 5 m connection cable for control panel, battery connection terminals, power cord, operating instructions

Der Phoenix 24/3000 Smart-Inverter von Victron Energy ist ein fortschrittlicher Wechselrichter auf Basis der bewährten Phoenix Serie. Er bietet eine Dauerleistung von 3000VA und ist für 24V Batteriespannung ausgelegt. Die Phoenix-Smart Serie verfügt im Vergleich zu den Vorgänger Modellen über ein Bluetooth-Modul und einen VE.Direct Ausgang zur drahtlosen Fernüberwachung und Systemkonfiguration.Der Phoenix 24/3000 Smart zeichnet sich weiter durch seine hohe Einschaltleistung und Zuverlässigkeit aus und spielt dank des integrierten ECO-Modus auch in Sachen Eigenverbrauch und Effizienz in der obersten Liga dieser Geräteklasse mit.Leistungsmerkmale Phoenix 24/3000 Smartfür 24V Batteriespannung, Ausgangsspannungsbereich 210C – 245VAusgangsleistung (nicht linear): 3000VA, 2400W lineare Dauerlast bei 25 Grad Umgebungstemperatur6000W Spitzenleistung Bewältigung hoher Anlaufströmeintegriertes Bluetooth Modul und VE.Direct Port zur drahtlosen Überwachung und System-Integrationausgelegt für hohe Einschaltströmeintegriertes Alarm-Relais, ECO ModusÜberwachung der Ein- und Ausgangsspannung, Last und Alarme etc. via Bluetooth oder VE.Directintegrierter, zweipoliger Stecker zum Anschluss eines Ein/Aus-Schalter (Fernsteuerung) über Bluetooth oder VE.Direct konfigurierbare ParameterAlarm niedrige BatteriespannungSchwellwerte zum Ausschalten und Neustarten bei niedrigen BatteriespannungswertenDynamisches Abschalten: lastabhängiger Abschalt-SchwellwertAusgangsspannung: 210 - 245V, Frequenz: 50 Hz oder 60 HzSchwellwert für ECO-Modus ein/aus und ECO-Modus-FühlerAlarm-Relais hohe Zuverlässigkeit dank RingtransformatorentopologieDie vollständige Überbrückung zusätzlich mit einer Ringtransformatorentopologie hat sich seit Jahren bewährt. Die Wechselrichter sind kurzschlussfest und vor Überhitzung (ob nun durch Überlastung oder durch die Umgebungstemperatur hervorgerufen) geschütztsehr hohe EinschaltleistungDiese wird zum Einschalten von Lasten wie zum Beispiel Spannungsumformern für LED- Lampen, Halogenlampen oder Elektrowerkzeugen benötigt. Eco ModusIm ECO-Modus schaltet der Wechselrichter auf Standby, sobald die Last unter einen voreingestellten Wert abfällt. Im Standby-Modus schaltet sich der Wechselrichter dann alle 2,5 Sekunden für einen kurzen Zeitraum ein (regulierbar). Überschreitet dabei die Last den voreingestellten Schwellwert, bleibt der Wechselrichter eingeschaltet.Ferngesteuerte Ein/Aus SchaltungAn den zweipoligen Stecker lässt sich ein ferngesteuerter Ein-/Aus-Schalter oder ein Relais- Kontakt anschließen. Alternativ kann der Anschluss H (links) des zweipoligen Steckers zu einem Batterie-Pluspol oder der Anschluss L (rechts) des zweipoligen Steckers an den Batterie-Minuspol (oder zum Beispiel an die Karosserie eines Fahrzeugs) geschaltet werden.

ThePhoenix 12/3000 Smart-Inverter From Victron Energy, is an advanced inverter based on the proven Phoenix series. It offers a continuous output of 3000W and is designed for 12V battery voltage. Compared to the predecessor models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration. The Phoenix 12/3000 Smart continues to be characterized by its high switching power and reliability and thanks to the integrated ECO mode, also plays in the top division of this device class in terms of self-consumption and efficiency.Problem features Phoenix 12/3000 Smart    for 12V battery voltage, output voltage range 210c - 245VOutput power (not linear): 3000W, 2400W linear permanent load at 25 degrees ambient temperature6000W top performance coping with high starting currentsIntegrated Bluetooth module and VE.Direct Port for wireless surveillance and system integrationdesigned for high insertion flowsIntegrated alarm relay, eco modeMonitoring of the input and output voltage, load and alarms etc. via bluetooth or ve.directIntegrated, two-pin connector to connect an on/off switch (remote control) Bluetooth or ve.direct configurable parameterAlarm low battery voltageThreshold values ​​for switching off and restarting with low battery voltage valuesDynamic switching off: load-dependent switch-off threshold valueOutput voltage: 210 - 245V, frequency: 50 Hz or 60 HzThreshold value for ECO mode on/off and ECO mode sensorAlarm relay High reliability thanks to the ring transformeropologyThe complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).very high switching powerThis is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools. Eco modeIn ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on every 2.5 seconds for a short period of time (can be regulated). If the load exceeds the preset threshold value, the inverter remains on.Remote -controlled on/off circuitA remote-controlled on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, the connection H (left) of the two-pin connector can be switched to a battery plus pole or the connection l (right) of the two-pin connector to the battery minus pole (or for example to the body of a vehicle).

The Victron Phoenix 12/800ve.direct (MPN PIN121800200) is a small sinus inverter with 700W permanent output. The device converts 12V DC voltage from your battery into 230V AC AC, with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products.Directional efficiency and modern system communicationThe efficiency of the Phoenix is ​​excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter.The scope of the PHOENIX series Ve.direct 12/800 is currently unique on the market for the price and goes far beyond the skills of other devices from the same performance classes.Technical features of the Phoenix 12/800 Ve.direct 700 watts of continuous power at 230V 50Hz sinus voltage 800 watt continuous output with non -linear load full control over almost all system parameters Suitable for all common 12V batteries 230V AC electricity with pure sinus shaft provides perfect power quality freely programmable input and offset swells freely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 800VA Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free Victron app (Ve.direct Bluetooth Smart Dongle necessary). Fully programmable parameters: threshold values ​​for triggering and resetting alarms with a low load status of the battery + threshold values ​​for switching off and restarting with low battery voltage values ​​+ output voltage 210 - 245V + threshold values ​​for switching off and restarting at low battery voltage values ​​+ frequency 50 Hz or 60 Hz + swelling value for ECO -Modus on/off and Eco mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).High switch-on power: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.Remote-controlled insert/off connection possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug. Scope of delivery:1x Victron Pin121800200 Phoenix 12/800 12V on 230V 700W 50Hz 60Hz data sheet Generally item number 1-67-011440 Manufacturer part number PIN121800200 Product Sinus inverter 12V / 230V with Ve.direct output Manufacturer Victron Energy Dimensions (LXBXH) 30.5 x 21.6 x 10.5 cm Weight 7 kg EAN 8719076038382

TheVictron Phoenix 12/500 Ve.direct is a small sinus inverter with 200W continuous output. The device converts 12V DC voltage from your battery into 230V AC AC, with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products. The efficiency of the Phoenix is ​​excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter. The scope of services of the Phoenix series VE.Direct 250-500 is currently on the market for the price and goes far beyond the skills of other devices from the same performance classes.Technical features of the Phoenix 12/500 Ve.direct200 watts of permanent current power at 230V 50Hz sinus voltageSuitable for all common 12V batteries230V AC electricity with pure sinus shaft provides perfect power qualityfreely programmable input and offset swellsfreely adjustable output voltage in the range of 210 - 245VTechnical highlights of the Phoenix Ve.direct series 250VA - 500VAVe.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free Victron app (Ve.direct Bluetooth Smart Dongle necessary).Fully programmable parameters: Threshold values ​​for triggering and resetting alarms with a low level of loading of the battery Threshold values ​​for switching off and restarting at low battery voltage values ​​output voltage 210 - 245V Threshold values ​​for switching off and restarting with low battery voltage values Frequency 50 Hz or 60 Hz Threshold value for ECO mode on/off and ECO mode sensorECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on.Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).High switch -on performance: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.Remote-controlled input/output possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug.

The Votronic Mobilpower SMI 1700 SINUS ST Inverter 12 V DC / 230 V AC is used for use in special vehicles, high -quality motorhomes and other areas in which high quality and reliability are required. It is designed for high permanent loads and does 1700W continuous output, 3000W short -term peak output for coping with high start -up flows. Even on the way, you don't want to do without the amenities of everyday life. Electrical devices not only increase comfort in the motorhome, but also determine the equipment in the ambulance or fire engine, regardless of whether it is sensitive medical devices, notebook, electric tools or the beloved espresso machine. All of these devices require 230 V network voltage, which is provided by an inverter from the on-board battery. Technical highlights of the Mobilpower SMI 1700 ST Inverters delivers output current with mains voltage quality (pure sinus) 1700 watts of continuous power, designed for 12V battery voltage) Only 10W self-consumption in the switched on condition without load and only 5 watts consumption in standby mode Compromise and problem-free, trouble-free operation of all network-powered devices, e.g. medical devices, radio, charging (cell phone, radio, hand lamps, batteries, etc.), laptop, PC, air conditioning, cooling boxes, power tools (drill, angle grinder, etc.), TV, satellite , TFT, microwave, fully automatic coffee machine, hairdryer, fan, lights, vacuum cleaners, fridge etc. The control panel can be rotated by 360 ° on the device and can also be placed freely as an external remote control in the vehicle Switch-Mode technology, compact, light, robust and reliable, briefly overloadable Low power consumption, selectable power saving mode: continuous operation or automatic standby with automatic search for the switched-on consumers or from Automatic shutdown with battery-over/undervoltage, overload, overheating etc. Performance and temperature-controlled comfort-cool fan with stepless speed control High efficiency of over 93% Made according to the latest standards and equipped with resilient power electronics that it will not let down for many years. The SMI 1700 ST: Modern inverter technology from Germany The devices work according to the latest technology in a striking design ("Switch Mode"). A compact design could be realized by microprocessor- Connection with modern SMD technology. And with it without any problems even at full power. Integrated protective circuits also monitor the thermal and electrical loads as well as overload and short circuits of the output circuit. The inverters have an intelligent power saving control with automatic switch -off. necessary. To protect the batteries, an undervoltage protection is integrated, which switches off the inverter when the battery is sunk. Flexible installation of the inverter display panel possible In order to optimally place the inverter, the display panel can be removed after removing the two fastening screws and reinstated in the desired position (rotatable in 90 ° steps) and screwed. If the inverter is installed at a difficult to access, the display panel can also be used as a remote control. To do this, the control panel is removed from the device, the 5 m long control line connected again to the device and mounted at the desired point. Optionally, additional remote control can also be connected if you want an display directly on the device and in the board area. Scope of delivery: 1x Votronic 3183 SMI 1700 ST 12V 230V Mobilepower Inverter 5m connection cable for controls, battery connection terminals, power cord, 1x connection scheme, operating instructions   Also available in boats with the electronics protected from moisture!   Technical specifications  Battery native voltage (DC) in [V] 12  Output voltage (AC) in [V] 230 pure sinus  Output frequency 50 Hz quartz stabilized  Efficiency > 93 %  Cosphi of the consumer everything allowed  Output power duration in [w] 1700  Output power short / tip in [W] 2100 / 3000  Minimum battery capacity (recommended) in [AH] > 150  Electricity intake (DC) with nominal output in [a] 165  Battery overvoltage max. [V] 16  Battery sub voltage min. In [V] 10,5  Self -consumption in [W] 10 (switched on, without load)  Self -consumption in standby in [W] 5 (without load)  Battery connection terminals in [mm2] 2 x 50  Temperature range [° C] -20 to +45  Protection level/class IP 21  Dimensions (WXHXT) in [mm] - Dimensions including fastening flanges, without connections 265 x 90 x 440  Weight in [g] 4900  Standards (CE) EN 60950  Ambient conditions, humidity: max. 95% room moisture, not condensing  Scope of delivery: 5 m connection cable for control panel, battery connection terminals, operating instructions

VOTRONIC 3158 Mobilpower SMI NVS 600 inverter 12V DC / 230V AC are used for use in special vehicles, high -quality motorhomes and other areas in which high quality and reliability are required and which are also equipped with a network circuit. Even on the way, you don't want to do without the amenities of everyday life. Electrical devices not only increase comfort in the motorhome, but also determine the equipment in the ambulance or fire engine, regardless of whether it is sensitive medical devices, notebook, electric tools or the beloved espresso machine. All of these devices require 230 V network voltage, which is provided by an inverter from the on-board battery. The devices work according to the latest technology in a striking design ("Switch Mode"). A compact design could be realized by microprocessor- Connection with modern SMD technology. And with it without any problems even at full power. Integrated protective circuits also monitor the thermal and electrical loads as well as overload and short circuits of the output circuit. The inverters have an intelligent power saving control with automatic switch -off. necessary. To protect the batteries, an undervoltage protection is integrated, which switches off the inverter when the battery is sunk. As a special feature, the mobile power inverter Sinus NVS are equipped with an integrated network of network. The advantage of this network switching is that e.g. B. all existing sockets on board a motorhome can continue to be used when landing electricity is created. The inverter switches off and the outer current is connected directly to the existing vehicle sockets. If there is no longer a country current available, the inverter is simply started and from now on the internal vehicle sockets will be supplied again. Technical highlights of the Votronic mobile power series Exit with mains voltage quality (pure sinus) Integrated network circuit Compromise and problem-free, trouble-free operation of all network-powered devices, e.g. medical devices, radio, charging brackets (cell phone, radio devices, hand lamps, batteries, etc.), laptop, PC, air conditioning, cooling boxes, power tools (drill, angle grinder, etc.), TV, satellite, TFT, microwave, fully automatic coffee machine, hair dryer, fan, lights, vacuum cleaner, refrigerator etc. The control panel can be rotated by 360 ° on the device and can also be freely placed as an external remote control in the vehicle (5m connection cable included) Switch fashion technology, compact, light, robust and reliable, briefly overloadable for a short time Low power consumption, selectable power saving mode: - permanent operation - Automatic standby with automatic search for switched on consumers - OUT OF Automatic shutdown with battery-over/undervoltage, overload, overheating etc. Performance and temperature-controlled comfort-cool fan with stepless speed control Also available in boats with the electronics protected from moisture!   Delivery time: 1-3 working days Technical specifications  Battery native voltage (DC) in [V] 12  Output voltage (AC) in [V] 230 pure sinus  Output frequency 50 Hz quartz stabilized  Efficiency > 93 %  Cosphi of the consumer everything allowed  Output power duration in [w] 600  Output power short / tip in [W] 840 / 1200  Minimum battery capacity (recommended) in [AH] > 80   Electricity intake (DC) with nominal output in [a] 56  Battery overvoltage max. [V] 16  Battery sub voltage min. In [V] 10,5  Self -consumption in [W] 6 (switched on, without load)  Self -consumption in standby in [W] 5 (without load)  Battery connection cable 10 mm2, 1.2 m  Temperature range [° C] -20 to +45  Protection level/class IP 21  Dimensions (WXHXT) in [mm] - Dimensions including fastening flanges, without connections 160 x 71 x 305  Weight in [g] 2300  Standards (CE) EN 60950  Ambient conditions, humidity: max. 95% room moisture, not condensing  Scope of delivery: 5 m connection cable for controls, battery connection cable, power cable, operating instructions

ThePhoenix 24/5000 Smart-Inverter Victron Energy Victron Energy is an advanced inverter based on the proven Phoenix series. It offers a continuous output of 5000W and is designed for 24V battery voltage. Compared to the predecessor models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration.The Phoenix 24/5000 Smart continues to be characterized by its high switch-off performance and reliability and thanks to the integrated ECO mode, also plays in terms of self-consumption and efficiency in the top division of this device class.Problem features Phoenix 24/5000 Smartfor 24V battery voltage, output voltage 230 VAC ± 2%Output power (not linear): 5000W, 4000W linear permanent load at 25 degrees ambient temperature10000W top performance coping with high starting currentsIntegrated Bluetooth module and VE.Direct Port for wireless monitoring and system integration interpreted for high switching flowsIntegrated alarm relay, eco modeMonitoring of the input and output voltage, load and alarms etc. via Bluetooth or Ve.direct Integrated, two-pin connector to connect an on/off switch (remote control) Via bluetooth or Ve.direct configurable parametersAlarm low battery voltageThreshold values ​​for switching off and restarting with low battery voltage valuesDynamic switching off: load-dependent switch-off threshold valueOutput voltage: 230 VAC ± 2%, frequency: 50 Hz or 60 HzThreshold value for ECO mode on/off and ECO mode sensor Alarm relay High reliability thanks to the ring transformeropologyThe complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and before overheating (whether now Overload or caused by the ambient temperature).Very high switching powerThis is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.Eco modeIn ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on every 2.5 seconds for a short period of time (can be regulated). If the load exceeds the preset threshold value, the inverter remains on.Remote -controlled on/off circuitA remote-controlled on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, the connection H (left) of the two-pin connector can be switched to a battery plus pole or the connection l (right) of the two-pin connector to the battery minus pole (or for example to the body of a vehicle).

ThePhoenix 12/2000 Smart inverter from Victron Energy is an advanced inverter based on the proven Phoenix series. It offers a continuous output of 1600W and is designed for 12V battery voltage. Compared to the predecessor models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration. The Phoenix 12/2000 Smart continues to be characterized by its high switch-off performance and reliability and thanks to the integrated ECO mode, also plays in terms of self-consumption and efficiency in the top division of this device class.Performance features Phoenix 12/2000 Smart    for 12V battery voltage, 1600W continuous powerIntegrated Bluetooth module and VE.Direct Port for wireless surveillance and system integrationdesigned for high insertion flows Integrated alarm relay, eco modeMonitoring of the input and output voltage, load and alarms etc. via bluetooth or ve.direct Integrated, two-pin connector to connect an on/off switch (remote control) Via bluetooth or Ve.direct configurable parametersAlarm low battery voltageThreshold values ​​for switching off and restarting with low battery voltage valuesDynamic switching off: load-dependent switch-off threshold valueOutput voltage: 210 - 245V, frequency: 50 Hz or 60 HzThreshold value for ECO mode on/off and ECO mode sensorAlarm relay High reliability thanks to the ring transformeropologyThe complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).very high switching powerThis is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools. Eco modeIn ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on every 2.5 seconds for a short period of time (can be regulated). If the load exceeds the preset threshold value, the inverter remains on.Remote -controlled on/off circuitA remote-controlled on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, the connection H (left) of the two-pin connector can be switched to a battery plus pole or the connection l (right) of the two-pin connector to the battery minus pole (or for example to the body of a vehicle).

TheVictron Phoenix 12/1200ve.direct is a small sine inverter with a 1200W continuous output. The device converts 12V DC voltage from your battery into 230V AC AC, with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products.Directional efficiency and modern system communicationThe efficiency of the Phoenix is ​​excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter.The scope of the PHOENIX series Ve.direct 12/1200 is currently on the market for the price and goes far beyond the skills of other devices from the same performance classes.Technical features of the Phoenix 12/1200 Ve.direct1000 watts of continuous power at 230V 50Hz sinus voltage 1200 watt continuous output with non -linear load full control over almost all system parameters Suitable for all common 12V batteries 230V AC electricity with pure sinus shaft provides perfect power quality freely programmable input and offset swells freely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 1200VA Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free Victron app (Ve.direct Bluetooth Smart Dongle necessary). Fully programmable parameters: threshold values ​​for triggering and resetting alarms with a low load status of the battery + threshold values ​​for switching off and restarting with low battery voltage values ​​+ output voltage 210 - 245V + threshold values ​​for switching off and restarting at low battery voltage values ​​+ frequency 50 Hz or 60 Hz + swelling value for ECO -Modus on/off and Eco mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).High switch -on performance: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.Remote-controlled insert/off connection possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug.

The Votronic Mobilpower SMI 1200 Sinus ST-NVS inverter 12 V DC / 230 V AC serves to use in special vehicles, high-quality motorhomes and other areas in which high quality and reliability are required. It is designed for high permanent loads and permanently does 1200W and up to 2000W short -term peak output for coping with high starting currents. ST-NVS with integrated network transfer A special highlight of the SMI ST-NVS series is the integrated network preliminary circuit. Thanks to it, your electricity system automatically receives its energy from the network when the power grid is connected and thus protects the batteries. If no network current is available, the device automatically switches to battery operation. The exact behavior of the NVS is flexible so that different configurations can be implemented as required. Technical highlights of the Mobilpower SMI 1200 ST-NVS Inverters delivers output current with mains voltage quality (pure sinus) 1200 watts of continuous power, designed for 12V battery voltage) Only 10W self-consumption in the switched on condition without load and only 5 watts consumption in standby mode Compromise and problem-free, trouble-free operation of all network-powered devices, e.g. medical devices, radio, charging (cell phone, radio, hand lamps, batteries, etc.), laptop, PC, air conditioning, cooling boxes, power tools (drill, angle grinder, etc.), TV, satellite , TFT, microwave, fully automatic coffee machine, hairdryer, fan, lights, vacuum cleaners, fridge etc. The control panel can be rotated by 360 ° on the device and can also be placed freely as an external remote control in the vehicle Switch-Mode technology, compact, light, robust and reliable, briefly overloadable Low power consumption, selectable power saving mode: continuous operation or automatic standby with automatic search for the switched-on consumers or from Automatic shutdown with battery-over/undervoltage, overload, overheating etc. Performance and temperature-controlled comfort-cool fan with stepless speed control High efficiency of over 93% Made according to the latest standards and equipped with resilient power electronics that it will not let down for many years. The SMI 1200 ST-NVS: Modern inverter technology from Germany The devices work according to the latest technology in a striking design ("Switch Mode"). A compact design could be realized by microprocessor- Connection with modern SMD technology. And with it without any problems even at full power. Integrated protective circuits also monitor the thermal and electrical loads as well as overload and short circuits of the output circuit. The inverters have an intelligent power saving control with automatic switch -off. necessary. To protect the batteries, an undervoltage protection is integrated, which switches off the inverter when the battery is sunk. Flexible installation of the inverter display panel possible In order to optimally place the inverter, the display panel can be removed after removing the two fastening screws and reinstated in the desired position (rotatable in 90 ° steps) and screwed. If the inverter is installed at a difficult to access, the display panel can also be used as a remote control. To do this, the control panel is removed from the device, the 5 m long control line connected again to the device and mounted at the desired point. Optionally, additional remote control can also be connected if you want an display directly on the device and in the board area. Scope of delivery: 1x Votronic 3178 SMI 1200 ST-NVS 12V 230V Mobilepower Inverter 5m connection cable for controls, battery connection terminals, power cord, 1x connection scheme, operating instructions   Also available in boats with the electronics protected from moisture! Technical specifications  Battery native voltage (DC) in [V] 12  Output voltage (AC) in [V] 230 pure sinus  Output frequency 50 Hz quartz stabilized  Efficiency > 93 %  Cosphi of the consumer everything allowed  Output power duration in [w] 1200  Output power short / tip in [W] 1400 / 2000  Minimum battery capacity (recommended) in [AH] > 110  Electricity intake (DC) with nominal output in [a] 115  Battery overvoltage max. [V] 16  Battery sub voltage min. In [V] 10,5  Self -consumption in [W] 8 (switched on, without load)  Self -consumption in standby in [W] 3 (without load)  Battery connection terminals in [mm2] 2 x 50  Temperature range [° C] -20 to +45  Protection level/class IP 21  Dimensions (WXHXT) in [mm] - Dimensions including fastening flanges, without connections 265 x 90 x 305  Weight in [g] 4000  Standards (CE) EN 60950  Ambient conditions, humidity: max. 95% room moisture, not condensing  Scope of delivery: 5 m connection cable for control panel, battery connection terminals, power cord, operating instructions

Der Votronic MobilPower SMI 1200 Sinus ST Wechselrichter 12 V DC / 230 V AC dient zur Anwendung in Sonderfahrzeugen, hochwertigen Reisemobilen und anderen Bereichen in denen hohe Qualität und Zuverlässigkeit gefragt sind. Er ist für hohe Dauerlasten ausgelegt und leistet 1200W Dauerleistung, 200W kurzfristige Spitzenleistung für das bewältigen hoher Anlaufströme. Auch unterwegs möchte man nicht gerne auf die Annehmlichkeiten des täglichen Lebens verzichten. Elektrische Geräte erhöhen nicht nur den Komfort im Reisemobil sondern bestimmen auch die Ausstattung im Rettungswagen oder Feuerwehrfahrzeug, egal ob es sich um empfindliche medizinische Geräte, Notebook, Elektro-Werkzeuge oder den geliebten Espressoautomaten handelt. All diese Geräte benötigen 230 V-Netzspannung, die von einem Wechselrichter aus der Bordbatterie bereitgestellt wird. Technische Highlights der MobilPower SMI 1200 ST Inverters liefert Ausgangstrom mit Netzspannungsqualität (reiner Sinus) 1200 Watt Dauerleistung, ausgelegt für 12V Batteriespannung) nur 8W Eigenverbrauch im eingeschalteten Zustand ohne Last und nur 3 Watt Verbrauch im StandBy-Modus Kompromiss- und problemloser, störungsfreier Betrieb aller netzbetriebenen Geräte, z.B. Medizinische Geräte, Funk, Ladehalterungen (Handy, Funkgeräte, Handlampen, Akkus etc.), Laptop, PC, Klimaanlage, Kühlboxen, Elektrowerkzeuge (Bohrmaschine, Winkelschleifer etc), TV, SAT, TFT, Mikrowelle, Kaffeevollautomat, Fön, Lüfter, Leuchten, Staubsauger, Kühlschrank etc. Bedienteil ist am Gerät um 360° drehbar und kann auch als externe Fernbedienung frei im Fahrzeug platziert werden Switch-Mode-Technik, kompakt, leicht, robust und zuverlässig, kurzzeitig hoch überlastbar Niedriger Stromverbrauch, wählbarer Stromsparmodus: Dauerbetrieb oder Automatik-StandBy mit automatischer Suche nach eingeschalteten Verbrauchern oder AUS Automatische Abschaltung bei Batterie-über/Unterspannung, überlastung, Überhitzung etc. Leistungs- und temperaturgesteuerter Komfort-Kühllüfter mit stufenloser Drehzahlregelung Hoher Wirkungsgrad von über 93% Gefertigt nach aktuellsten Normen und bestückt mit belastbarer Leistungselektronik die Sie für viele Jahre nicht im Stich lassen wird. Der SMI 1200 ST: moderne Wechselrichter-Technik aus Deutschland Die Geräte arbeiten nach neuester Technik in getakteter Ausführung („switch mode"). Durch Mikroprozessor–Steuerung in Verbindung mit moderner SMD–Technik konnte eine kompakte Bauform realisiert werden. Geräusch- und reibungs- optimierte Leichtlauf-Lüfter (drehzahlgesteuert) sorgen für perfekte Kühlung und damit problemlosen Dauerbetrieb auch bei voller Leistung. Integrierte Schutzschaltungen überwachen darüber hinaus die thermische und elektrische Belastung sowie Überlastung und Kurzschlüsse des Ausgangsstromkreises. Die Wechselrichter verfügen über eine intelligente Stromsparsteuerung mit Abschaltautomatik. Sie stellt sicher, dass nicht mehr Strom im Leerlauf verbraucht wird als unbedingt notwendig. Zum Schutz der Batterien ist ein Unterspannungsschutz integriert, der den Wechselrichter bei abgesunkener Batterie- Spannung abschaltet. Flexibler Einbau des Inverter-Anzeigepanels möglich Um den Wechselrichter optimal zu platzieren, kann das Anzeigepanel nach Entfernen der zwei Befestigungsschrauben herausgenommen und in der gewünschten Stellung wiedereingesetzt (in 90°-Schritten drehbar) und verschraubt werden. Bei Einbau des Wechselrichters an schwer zugänglicher Stelle, kann das Anzeigepanel auch als Fernbedienung verwendet werden. Dazu wird das Bedienteil aus dem Gerät genommen, mit der 5 m langen Steuerleitung wieder mit dem Gerät verbunden und an der gewünschten Stelle montiert. Optional kann auch eine Zusatzfernbedienung angeschlossen werden, wenn Sie eine Anzeige direkt am Gerät und im Boardbereich wünschen. Lieferumfang: 1x Votronic 3177 SMI 1200 ST 12V 230V MobilePower Inverter 5m Anschlusskabel für Bedienteil, Batterieanschlussklemmen, Netzkabel, 1x Anschluss-Schema, Bedienungsanleitung   Auch erhältlich in Boots-Ausführung mit vor Feuchtigkeit geschützter Elektronik! Technische Daten  Batterie-Nennspannung (DC) in [V] 12  Ausgangsspannung (AC) in [V] 230 reiner Sinus  Ausgangsfrequenz 50 Hz quarzstabilisiert  Wirkungsgrad > 93 %  CosPhi der Verbraucher alles erlaubt  Ausgangsleistung Dauer in [W] 1200  Ausgangsleistung kurz / Spitze in [W] 1400 / 2000  Mindest-Batteriekapazität (empfohlen) in [Ah] > 110  Stromaufnahme (DC) bei Nennleistung in [A] 115  Batterieüberspannung max. [V] 16  Batterieunterspannung min. in [V] 10,5  Eigenverbrauch in [W] 8 (eingeschaltet, ohne Last)  Eigenverbrauch im StandBy in [W] 3 (ohne Last)  Batterie-Anschlussklemmen in [mm2] 2 x 50  Temperaturbereich [°C] -20 bis +45  Schutzgrad/-klasse IP 21  Maße (BxHxT) in [mm] - Maße inkl. Befestigungsflansche, ohne Anschlüsse 265 x 90 x 305  Gewicht in [g] 3800  Normen (CE) EN 60950  Umgebungsbedingungen, Luftfeuchtigkeit:  max. 95% Raumfeuchte, nicht kondensierend  Lieferumfang: 5 m Anschlusskabel für Bedienteil, Batterie-Anschlussklemmen, Bedienungsanleitung

The VictronPhoenix 24/1200ve.direct is a small sinus inverter with a permanent performance of 1000W. The device converts 24V DC voltage from your battery into 230V AC AC, with a pure sine voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products.directional efficiency and modern system communicationThe efficiency of the Phoenix is ​​excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter.The scope of the PHOENIX series Ve.direct 24/1200 is currently unique on the market for the price and goes far beyond the skills of other devices from the same performance classes. Technical features of the Phoenix 1241200 Ve.direct 1000 watts of continuous power at 230V 50Hz sinus voltage 1200 watt continuous output with non -linear load full control over almost all system parameters Suitable for all common 24V batteries 230V AC electricity with pure sinus shaft provides perfect power quality freely programmable input and offset swells freely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 1200VAVe.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free Victron app (Ve.direct Bluetooth Smart Dongle necessary).Fully programmable parameters: Threshold values ​​for triggering and resetting alarms with a low loading status of the battery + threshold values ​​for switching off and restarting at low battery voltage values ​​+ output voltage 210 - 245V + threshold values ​​for switching off and restarting at low battery voltage values ​​+ frequency 50 Hz or 60 Hz + swelling value for ECO mode in from and Eco mode sensorECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer panel has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature). High switch -on performance: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.Remote-controlled insert/off connection possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug.

Votronic Mobilpower SMI 600 inverter 12 V DC / 230 V AC are used for use in special vehicles, high -quality motorhomes and other areas in which high quality and reliability are required. Even on the way, you don't want to do without the amenities of everyday life. Electrical devices not only increase comfort in the motorhome, but also determine the equipment in the ambulance or fire engine, regardless of whether it is sensitive medical devices, notebook, electric tools or the beloved espresso machine. All of these devices require 230 V network voltage, which is provided by an inverter from the on-board battery. The devices work according to the latest technology in a striking design ("Switch Mode"). A compact design could be realized by microprocessor- Connection with modern SMD technology. And with it without any problems even at full power. Integrated protective circuits also monitor the thermal and electrical loads as well as overload and short circuits of the output circuit. The inverters have an intelligent power saving control with automatic switch -off. necessary. To protect the batteries, an undervoltage protection is integrated, which switches off the inverter when the battery is sunk. Technical highlights of the Votronic mobile power series Exit with mains voltage quality (pure sinus) Compromise and problem-free, trouble-free operation of all network-powered devices, e.g. medical devices, radio, charging brackets (cell phone, radio devices, hand lamps, batteries, etc.), laptop, PC, air conditioning, cooling boxes, power tools (drill, angle grinder, etc.), TV, satellite, TFT, microwave, fully automatic coffee machine, hair dryer, fan, lights, vacuum cleaner, refrigerator etc. The control panel can be rotated by 360 ° on the device and can also be freely placed as an external remote control in the vehicle (5m connection cable included) Switch fashion technology, compact, light, robust and reliable, briefly overloadable for a short time Low power consumption, selectable power saving mode: - permanent operation - Automatic standby with automatic search for switched on consumers - OUT OF Automatic shutdown with battery-over/undervoltage, overload, overheating etc. Performance and temperature-controlled comfort-cool fan with stepless speed control   Technical specifications  Battery native voltage (DC) in [V] 12  Output voltage (AC) in [V] 230 pure sinus  Output frequency 50 Hz quartz stabilized  Efficiency > 93 %  Cosphi of the consumer everything allowed  Output power duration in [w] 600  Output power short / tip in [W] 840 / 1200  Minimum battery capacity (recommended) in [AH] > 80  Electricity intake (DC) with nominal output in [a] 56  Battery overvoltage max. [V] 16  Battery sub voltage min. In [V] 10,5  Self -consumption in [W] 6 (switched on, without load)  Self -consumption in standby in [W] 5 (without load)  Battery connection cable 10 mm2, 1.2 m  Temperature range [° C] -20 to +45  Protection level/class IP 21  Dimensions (WXHXT) in [mm] - Dimensions including fastening flanges, without connections 160 x 71 x 305  Weight in [g] 2000  Standards (CE) EN 60950  Ambient conditions, humidity: max. 95% room moisture, not condensing  Scope of delivery: 5 m connection cable for control panel, battery connection cable, operating instructions

TheVictron Phoenix inverter 48/5000 is the largest 48V variant of a Phoenix inverter. Especially in the communication area, he has some innovative technologies that make the 48/5000 a future -proof investment. The continuous output of this device is 4000W. From a 48V battery, this device generates 230V AC with a pure sine wave and clean 50Hz frequency. which also makes the operation of very sensitive electronics devices possible without compromise. The voltage converter also scores with excellent values ​​in terms of self -consumption and efficiency. As an icing on the cake, this device class now also dominates the parallel operation and the three -phase operations with other Phoenix interverters of the same series. Ve.Bus RS-485 Communication sport-far-reaching, new possibilitiesAll Phoenix inverter of the Series 12V/24V/48V-3000-5000 have an RS-485 data port and can thus use the optional VE Interface MK2-USB connection to a computer/notebook, which can be used in terms of configuration and Monitoring opened whole new possibilities. Here are some of the most important options that result from this innovation for you:Requested programming of many parameters such as output voltage, frequency, the upper and lower voltage boundaries and much morecan be integrated into a computer-aided monitoring and control systemAll Phoenix Compact converter can also be used on Venet, the innovative performance monitoring network from Victron Energy, or other computer-aided control and monitoring systemsEasy programming of the integrated relay. The relay can be used, for example, to create signals in special situations or to start a generator.Parallel and three-phase operation with other Phoenix inverters possibleThe development of the new Phoenix series aimed uncompromisingly on an inverter with a clean sinus output with high efficiency. By applicationLatest hybrid HF technology Was it possible to develop a quality product with compact dimensions with low weight, which can easily output any desired performance. The Sinus-Max technologyWhich also enables its place in this series. Other technical 48/5000 Phoenix4000W continuous output, suitable for all common 48V batteriesReal sine wave delivers a precise 50Hz frequencyMuch higher top performance possible thanks to integrated sinus-max technology from VictronConvert 48V DC into 230V AC with pure sinus waveAdvanced hybrid HF technology is installed, which is much more powerful and less prone to disorders than conventional high-frequency technologyvery low self -consumption and high efficiencyIntegrated energy saving modewith 2 poly alarm contact which can be used as an output for one, outdoor controlVery high starting performance thanks to SinusMax technologyThe Sinus Max TechnologyAn essential feature of the Sinusmax technology is the particularly high starting performance. This is not possible with conventional HF technology. Phoenix inverters are able to cope with the high starting streams, for example, of cooling compressors, tool engines and the like. Practically unlimited performance due to parallel circuit and three-phase operation up to six inverter units can be switched in parallel to increase performance. A three-phase operation is also possible. Load switching to other alternating current sources: The automatic load switch for smaller services we recommend the Filax automatic switch. Computers and other sensitive electronic devices can be used practically without interruption, since the switching times are very short (under 20 m/sec)

The Victron Phoenix 12/375 Ve.direct is a small sinus inverter with 300W continuous output. The device converts 12V DC voltage from your battery into 230V AC AC, with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products. The efficiency of the Phoenix is ​​excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter. The scope of services of the Phoenix series VE.Direct 250-500 is currently on the market for the price and goes far beyond the skills of other devices from the same performance classes. Technical features of the Phoenix 12/375 Ve.direct300 watt permanent current power at 230V 50Hz sinus voltageSuitable for all common 12V batteries230V AC electricity with pure sinus shaft provides perfect power qualityfreely programmable input and offset swellsfreely adjustable output voltage in the range of 210 - 245VTechnical highlights of the Phoenix Ve.direct series 250VA - 500VAVe.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free Victron app (Ve.direct Bluetooth Smart Dongle necessary).Fully programmable parameters: Threshold values ​​for triggering and resetting alarms with a low level of loading of the battery Threshold values ​​for switching off and restarting with low battery voltage values Output voltage 210 - 245V Threshold values ​​for switching off and restarting with low battery voltage values Frequency 50 Hz or 60 Hz Threshold value for ECO mode on/off and ECO mode sensorEco mode integrated: In ECO mode, the ech signal switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on.Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).High switch -on performance: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.Remote-controlled input/output possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug.

Victron inverter RS ​​48/6000 230V (PIN482600000) The inverter RS ​​Smart is a powerful inverter with 48 VDC, 6 KVA and 230 VAC. Thanks to its modern design and high frequency technology, the inverter only weighs 11 kg and has an excellent efficiency, low standby performance and very quiet operation. The inverter is equipped with a display to display battery and inverter details. These parameters can also be read out by the VictronConnect app via Bluetooth. In addition, the inverter has a Ve.CAN connection for the connection to a GX device for system monitoring.Victron RS 48/6000 - light, efficient and quiet Thanks to the high frequency technology and a new design, this powerful inverter weighs only 11 kg. In addition, it has an excellent efficiency, low standby performance and very quiet operation.Display and Bluetooth The display reads the parameters of the battery and inverter. The same parameters can be accessed with a smartphone or another Bluetooth-enabled device. Bluetooth can also be used to set up the system and change settings with VictronConnect.Ve.can and ve.direct connection of the PIN482600000 For connection to a GX device for system monitoring, data protocol and long-distance firmware updates.E/A compounds of the Victron inverter Programmable relay, temperature sensor and voltage sensor connections. The remote entrance can also be configured in such a way that it accepts the Victron Smallbms.

VOTRONIC 3156 Mobilpower SMI NVS 300 Inverter 12V / 230V AC serve in special vehicles, high -quality motorhomes and other areas in which high quality and reliability are required and which are also equipped with a network circuit. Even on the way, you don't want to do without the amenities of everyday life. Electrical devices not only increase comfort in the motorhome, but also determine the equipment in the ambulance or fire engine, regardless of whether it is sensitive medical devices, notebook, electric tools or the beloved espresso machine. All of these devices require 230 V network voltage, which is provided by an inverter from the on-board battery. The devices work according to the latest technology in a striking design ("Switch Mode"). A compact design could be realized by microprocessor- Connection with modern SMD technology. And with it without any problems even at full power. Integrated protective circuits also monitor the thermal and electrical loads as well as overload and short circuits of the output circuit. The inverters have an intelligent power saving control with automatic switch -off. necessary. To protect the batteries, an undervoltage protection is integrated, which switches off the inverter when the battery is sunk. As a special feature, the mobile power inverter Sinus NVS are equipped with an integrated network of network. The advantage of this network switching is that e.g. B. all existing sockets on board a motorhome can continue to be used when landing electricity is created. The inverter switches off and the outer current is connected directly to the existing vehicle sockets. If there is no longer a country current available, the inverter is simply started and from now on the internal vehicle sockets will be supplied again. Technical highlights of the Votronic mobile power series Exit with mains voltage quality (pure sinus) Integrated network circuit Compromise and problem-free, trouble-free operation of all network-powered devices, e.g. medical devices, radio, charging brackets (cell phone, radio devices, hand lamps, batteries, etc.), laptop, PC, air conditioning, cooling boxes, power tools (drill, angle grinder, etc.), TV, satellite, TFT, microwave, fully automatic coffee machine, hair dryer, fan, lights, vacuum cleaner, refrigerator etc. The control panel can be rotated by 360 ° on the device and can also be freely placed as an external remote control in the vehicle (5m connection cable included) Switch fashion technology, compact, light, robust and reliable, briefly overloadable for a short time Low power consumption, selectable power saving mode: - permanent operation - Automatic standby with automatic search for switched on consumers - OUT OF Automatic shutdown with battery-over/undervoltage, overload, overheating etc. Performance and temperature-controlled comfort-cool fan with stepless speed control   Technical specifications  Battery native voltage (DC) in [V] 12  Output voltage (AC) in [V] 230 pure sinus  Output frequency 50 Hz quartz stabilized  Efficiency > 93 %  Cosphi of the consumer everything allowed  Output power duration in [w] 300  Output power short / tip in [W] 420 / 600  Minimum battery capacity (recommended) in [AH] > 60  Electricity intake (DC) with nominal output in [a] 27,5  Battery overvoltage max. [V] 16  Battery sub voltage min. In [V] 10,5  Self -consumption in [W] 4 (switched on, without load)  Self -consumption in standby in [W] 3 (without load)  Battery connection cable 4 mm2, 1.2 m  Temperature range [° C] -20 to +45  Protection level/class IP 21  Dimensions (WXHXT) in [mm] - Dimensions including fastening flanges, without connections 160 x 71 x 305  Weight in [g] 1800  Standards (CE) EN 60950  Ambient conditions, humidity: max. 95% room moisture, not condensing  Scope of delivery: 5 m connection cable for controls, battery connection cable, power cable, operating instructions

TheVictron inverter Phoenix 24/3000 is the second largest 24V variant of a Phoenix inverter. Especially in the communication area, he has some innovative technologies that make the 24/3000 a future -proof investment. The continuous output of this device is 2400W. From a 24V battery, this device generates 230V AC with a pure sinus wave and clean 50Hz frequency. which also makes the operation of very sensitive electronics devices possible without compromise. The voltage converter also scores with excellent values ​​in terms of self -consumption and efficiency. As an icing on, this device class now also dominates the parallel operation and the three -phase operations with other Phoenix interverters of the same series. Ve.Bus RS-485 Communication sport-far-reaching, new possibilitiesAll Phoenix inverter of the Series 12V/24V/48V-3000-5000 have an RS-485 data port and can thus use the optional VE Interface MK2-USB connection to a computer/notebook, which can be used in terms of configuration and Monitoring opened whole new possibilities. Here are some of the most important options that result from this innovation for you:Requested programming of many parameters such as output voltage, frequency, the upper and lower voltage boundaries and much morecan be integrated into a computer-aided monitoring and control systemAll Phoenix Compact converter can also be used on Venet, the innovative performance monitoring network from Victron Energy, or other computer-aided control and monitoring systemsEasy programming of the integrated relay. The relay can be used, for example, to create signals in special situations or to start a generator.Parallel and three-phase operation with other Phoenix inverters possible The development of the new Phoenix series aimed uncompromisingly on an inverter with a clean sinus output with high efficiency. By applicationLatest hybrid HF technology Was it possible to develop a quality product with compact dimensions with low weight, which can easily output any desired performance. Sinusmax technology, which also enables its place in this series, particularly high peak currents when switching on devices of 6000W! Other technical details of the Phoenix 24/30002400W continuous output, suitable for all common 24V batteriesReal sine wave delivers a precise 50Hz frequencyMuch higher top performance possible thanks to integrated sinus-max technology from VictronChange 24V DC into 230V AC with pure sinus waveAdvanced hybrid HF technology is installed, which is much more powerful and less prone to disorders than conventional high-frequency technologyvery low self -consumption and high efficiencyIntegrated energy saving modewith 2 poly alarm contact which can be used as an output for one, outdoor controlVery high starting performance thanks to SinusMax technology The Sinus Max TechnologyAn essential feature of the Sinusmax technology is the particularly high starting performance. This is not possible with conventional HF technology. Phoenix inverters are able to cope with the high starting streams, for example, of cooling compressors, tool engines and the like. Practically unlimited performance due to parallel circuit and three-phase operation up to six inverter units can be switched in parallel to increase performance. A three-phase operation is also possible.Load switching on other intercourse sources: the automatic load switch For smaller services, we recommend the Filax automatic switch. Computers and other sensitive electronic devices can be operated practically without interruption, since the switching times are very short (below 20 m/sec).

TheVictron inverter Phoenix 24/5000 is the largest 24V variant of a Phoenix inverter. Especially in the communication area, he has some innovative technologies that make the 24/5000 a future -proof investment. The continuous output of this device is 4000W. From a 24V battery, this device generates 230V AC with a pure sinus wave and clean 50Hz frequency. which also makes the operation of very sensitive electronics devices possible without compromise. The voltage converter also scores with excellent values ​​in terms of self -consumption and efficiency. As a icing on the cake, this device class now also dominates parallel operation and the three -phase operations with other Phoenix interverters of the same series. Ve.Bus RS-485 Communication sport-far-reaching, new possibilitiesAll Phoenix inverter of the Series 12V/24V/48V-3000-5000 have an RS-485 data port and can thus use the optional VE Interface MK2-USB connection to a computer/notebook, which can be used in terms of configuration and Monitoring opened whole new possibilities.Here are some of the most important options that result from this innovation for you:Requested programming of many parameters such as output voltage, frequency, the upper and lower voltage boundaries and much more can be integrated into a computer-aided monitoring and control system All Phoenix Compact converter can also be used on Venet, the innovative performance monitoring network from Victron Energy, or other computer-aided control and monitoring systems Easy programming of the integrated relay. The relay can be used, for example, to create signals in special situations or to start a generator. Parallel and three-phase operation with other Phoenix inverters possible The development of the new Phoenix series aimed uncompromisingly on an inverter with a clean sinus output with high efficiency. By applicationLatest hybrid HF technology Was it possible to develop a quality product with compact dimensions with low weight, which can easily output any desired performance. Sinusmax technology, which also enables its place in this series, particularly high peak currents when switching on devices from 10000W! Other technical 24/5000 Phoenix4000W continuous output, suitable for all common 24V batteriesReal sine wave delivers a precise 50Hz frequencyMuch higher top performance possible thanks to integrated sinus-max technology from VictronChange 24V DC into 230V AC with pure sinus waveAdvanced hybrid HF technology is installed, which is much more powerful and less prone to disorders than conventional high-frequency technologyvery low self -consumption and high efficiencyIntegrated energy saving modewith 2 poly alarm contact which can be used as an output for one, outdoor controlVery high starting performance thanks to SinusMax technology The Sinus Max TechnologyAn essential feature of the Sinusmax technology is the particularly high starting performance. This is not possible with conventional HF technology. Phoenix inverters are able to cope with the high starting streams, for example, of cooling compressors, tool engines and the like. Practically unlimited performance due to parallel circuit and three-phase operation up to six inverter units can be switched in parallel to increase performance. A three-phase operation is also possible.Load switching on other intercourse sources: the automatic load switch For smaller services, we recommend the Filax automatic switch. Computers and other sensitive electronic devices can be operated practically without interruption, since the switching times are very short (below 20 m/sec).

TheVictron inverter Phoenix 48/3000 is the second largest 48V variant of a Phoenix inverter. Especially in the communication area, he has some innovative technologies that make the C48/3000 a future -proof investment. The continuous output of this device is 2400W. From a 48V battery, this device generates 230V AC with a pure sine wave and clean 50Hz frequency. which also makes the operation of very sensitive electronics devices possible without compromise. The voltage converter also scores with excellent values ​​in terms of self -consumption and efficiency. As a icing on the cake, this device class now also dominates parallel operation and the three -phase operations with other Phoenix interverters of the same series. Ve.Bus RS-485 Communication sport-far-reaching, new possibilitiesAll Phoenix inverter of the Series 12V/24V/48V-3000-5000 have an RS-485 data port and can thus use the optional VE Interface MK2-USB connection to a computer/notebook, which can be used in terms of configuration and Surveillance opened whole new possibilities:Programming -based programming many parameters such as the output voltage, frequency, the upper and lower voltage limits and much morecan be integrated into a computer-aided monitoring and control system All Phoenix Compact converter can also be used on Venet, the innovative performance monitoring network from Victron Energy, or other computer-aided control and monitoring systemsEasy programming of the integrated relay. The relay can be used, for example, to create signals in special situations or to start a generator.Parallel and three-phase operation with other Phoenix inverters possible The development of the new Phoenix series aimed uncompromisingly on an inverter with a clean sinus output with high efficiency. By applicationLatest hybrid HF technology Was it possible to develop a quality product with compact dimensions with low weight, which can easily output any desired performance. Sinusmax technology, which also enables its place in this series, particularly high peak currents when switching on devices of 6000W! Other technical 48/3000 Phoenix2400W continuous output, suitable for all common 48V batteriesReal sine wave delivers a precise 50Hz frequencyMuch higher top performance possible thanks to integrated sinus-max technology from VictronConvert 48V DC into 230V AC with pure sinus waveAdvanced hybrid HF technology is installed, which is much more powerful and less prone to disorders than conventional high-frequency technologyvery low self -consumption and high efficiencyIntegrated energy saving modewith 2 poly alarm contact which can be used as an output for one, outdoor controlVery high starting performance thanks to SinusMax technology Sinus-Max technologyAn essential feature of the Sinusmax technology is the particularly high starting performance. This is not possible with conventional HF technology. Phoenix inverters are able to cope with the high starting streams, for example, of cooling compressors, tool engines and the like. Practically unlimited performance due to parallel circuit and three-phase operation up to six inverter units can be switched in parallel to increase performance. A three-phase operation is also possible.Load switching on other intercourse sources: the automatic load switch For smaller services, we recommend the Filax automatic switch. Computers and other sensitive electronic devices can be operated practically without interruption, since the switching times are very short (below 20 m/sec).

TheVictron Phoenix 48/5000 Smart-Inverter Victron Energy Victron Energy is an advanced inverter based on the proven Phoenix series. It offers a continuous output of 5000W and is designed for 48V battery voltage. Compared to the predecessor models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration. The Phoenix 48/5000 Smart continues to be characterized by its high switching performance and reliability and thanks to the integrated ECO mode, also plays in terms of self-consumption and efficiency in the top league of this device class. Problem features Phoenix 48/5000 SmartFor 48V battery voltage, output voltage 230 VAC ± 2%Output power (not linear): 5000W, 4000W linear permanent load at 25 degrees ambient temperature10000W top performance Coping with high start -up flowsIntegrated Bluetooth module and VE.Direct Port for wireless surveillance and system integrationdesigned for high insertion flowsIntegrated alarm relay, eco modeMonitoring of the input and output voltage, load and alarms etc. via bluetooth or ve.directIntegrated, two-pin connector to connect an on/off switch (remote control)Via bluetooth or Ve.direct configurable parametersAlarm low battery voltageThreshold values ​​for switching off and restarting with low battery voltage valuesDynamic switching off: load-dependent switch-off threshold valueOutput voltage: 230 VAC ± 2%, frequency: 50 Hz or 60 HzThreshold value for ECO mode on/off and ECO mode sensorAlarm relayHigh reliability thanks to the ring transformeropologyThe complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature). Very high switching powerThis is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools. Eco modeIn ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on every 2.5 seconds for a short period of time (can be regulated). If the load exceeds the preset threshold value, the inverter remains on. Remote -controlled on/off circuitA remote-controlled on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, the connection H (left) of the two-pin connector can be switched to a battery plus pole or the connection l (right) of the two-pin connector to the battery minus pole (or for example to the body of a vehicle).

TheVictron Phoenix 48/1200ve.direct is a small sine inverter with a 1200W continuous output. The device converts 48V DC voltage from your battery into 230V AC alternating current and with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products. Directional efficiency and modern system communication The efficiency of the Phoenix is ​​excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter.The scope of services of the Phoenix series VE.Direct 48/1200 is currently on the market for the price and goes far beyond the skills of other devices from the same performance classes. Technical features of the Phoenix 48/1200 Ve.direct 1000 watts of continuous power at 230V 50Hz sinus voltage1200 watt continuous output with non -linear loadfull control over almost all system parametersSuitable for all common batteries with 48V battery voltage230V AC electricity with pure sinus shaft provides perfect power qualityfreely programmable input and offset swellsfreely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 1200VA Ve.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free Victron app (Ve.direct Bluetooth Smart Dongle necessary).    Fully programmable parameters: Threshold values ​​for triggering and resetting alarms with a low level of loading of the battery Threshold values ​​for switching off and restarting with low battery voltage values Output voltage 210 - 245V Frequency 50 Hz or 60 Hz Threshold value for ECO mode on/off and ECO mode sensor ECO mode integrated:In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature). High switch -on performance: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.Remote-controlled input/output possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug.

TheVictron Phoenix 48/375ve.direct is a small sinus inverter with 300W continuous output. The device converts 48V DC voltage from your battery into 230V AC alternating current and with a pure sinus voltage and uncompromising electricity quality, which is also ideally suited for sensitive electronics products. The efficiency of the Phoenix is ​​excellent and thanks to the Eco fashion one of the highest in its class. Via the VE.Direct Communication connection you can connect with optional accessories, the device to a computer or smartphone and program some system parameters such as the switch -off voltage and re -switching voltage with empty battery! Many other configuration options such as output frequency and output voltage as well as a 2-pin alarm contact are among the performance features of this voltage converter.The scope of services of the Phoenix series VE.Direct 250-500 is currently on the market for the price and goes far beyond the skills of other devices from the same performance classes. Technical features of the Phoenix 48/375 Ve.direct300 watt permanent current power at 230V 50Hz sinus voltageFor 48V batterys, work with all common battery types230V AC electricity with pure sinus shaft provides perfect power qualityfreely programmable input and offset swellsfreely adjustable output voltage in the range of 210 - 245V Technical highlights of the Phoenix Ve.direct series 250VA - 500VA 48VVe.direct connection enables the combination converter to be connected to a computer (VE.Direct to USB interface cable) or your smartphone on which you always keep an eye on the status of your device with the free Victron app (Ve.direct Bluetooth Smart Dongle necessary).Fully programmable parameters: Threshold values ​​for triggering and resetting alarms with a low level of loading of the battery Threshold values ​​for switching off and restarting with low battery voltage values Output voltage 210 - 245V Frequency 50 Hz or 60 Hz Threshold value for ECO mode on/off and ECO mode sensorECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops under a preset value. In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset threshold value, the inverter remains on. Proven reliability of the current converter: The complete bridging with a ring transformer popology has proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).High switch-on power: This is required to switch on loads such as voltage formers for LED lamps, halogen lamps or power tools.Remote-controlled input/output possible: A remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pole plug.