Wallbox
EVC300400300
Victron Energy EV Charging Station - Wallbox
The new Victron high-performance EV charging station-EV Charging Station
The Victron Wallbox has three -phase and single -phase skills and delivers a maximum of 22 kW alternating current in three -phase mode or 7.3 kW in single -phase mode. Equipped with Wi-Fi communication Wi-Fi: 802.11 B/G/N for configuration and surveillance. The internal Wi-Fi module can be configured for both the initial setup and for monitoring in Access Point mode or in station mode.
The Victron charging station has a 4.3-inch LCD touchscreen for monitoring and control as well as light ring for the quick display of the device status around the charging connection to quickly determine the device status. The light ring can be programmed via the web interface in such a way that depending on the current state (separated, loaded, loaded, loaded, etc.), it shows different lighting effects. The aim is to help the user signal the current state from a distance.
Two working modes available: Manual mode for configuring the output current
The manual mode enables a configurable output current between 6-32a. The charging capacity is controlled in two ways: via the slider on the LCD touchscreen or via the website. It enables manual starting or stopping the charging process when a vehicle is connected to the charging station.
Automatic mode to ensure maximum efficiency of the PV system. It recognizes when excess energy is available and only uses this energy to charge the vehicle.
Integration with GX devices
The EV charging station can be configured and monitored via the GX screen devices and the remote console. Several options are available in the VRM portal: real-time reports, custom reports for configurable periods, extended functions such as remote firmware update.
EVC200300200
Victron Energy EV Charging Station II - Wallbox NS Blue
The EV Charging Station NS can be operated both three -phase and single -phase. It delivers a maximum of 22 kW alternating current in three -phase operation and 7.3 kW in single -phase operation. The device is technically identical to the EV Charging station, but has a new, modern design that is available in 3 colors and has no built-in LCD screen. The initial setup, configuration and monitoring takes place from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi access point or a WiFi-LAN. The charging station can be fully integrated into a GX device and a VRM Victron Energy VRM and remotely controlled via it. This EV Charging Station NS is not only fully integrated with a GX device and a VRM VICTRON Energy, but can also be set so that excess solar energy can be used directly to load your vehicle. Manual and time -controlled modes offer even more flexibility to react to the needs of the electric vehicle depending on the system.
It has a fully programmable RGB glow ring around the loading connection, which depending on the power status (separated, loaded, loaded, loaded, etc.) shows different lighting effects in order to quickly determine the device status.https://youtu.be/uVVsdSj9pmg
THOR 07AS-S
Growatt APX 98034-P2 power module BMS
The newGrowatt APX 98034-P2 Battery management system is a control unit of the latest generation that protects each APX battery module from adverse conditions and ensures safe and disruptive continuous operation. It does not matter how many modules are in operation at the same time. It is important that one BMS per tower is always used. A tower consists of at least 1 to a maximum of 6 Growatt APX 5.0P-B1 5KWH high-voltage battery modules, which can result in a storage capacity of 5-30 kWh.
Monitoring parameterSocSystem voltageSystem currentCell tensionCell temperaturePCBA temperatureThe APX battery system:Thanks to the modular concept, the APX system can be used flexibly and can be expanded if necessary. A battery tower can be built with at least one to a maximum of 6 memory modules. A performance module is required for operation per tower. This is separate for purchase. An additional base is required for soil mounting.
Technical specifications:Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Electricity: 30ATop current: 34a, 60sCommunication: RS485/CanScope of delivery:1x Growatt APX 98034-P2 BMS
EVC200300310
Victron ev Charger ns black front panel
The EV Charging Station NS can be operated both three -phase and single -phase. It delivers a maximum of 22 kW alternating current in three -phase operation and 7.3 kW in single -phase operation. The device is technically identical to the EV Charging station, but has a new, modern design that is available in 3 colors and has no built-in LCD screen. The initial setup, configuration and monitoring takes place from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi access point or a WiFi-LAN. The charging station can be fully integrated into a GX device and a VRM Victron Energy VRM and remotely controlled via it. This EV Charging Station NS is not only fully integrated with a GX device and a VRM VICTRON Energy, but can also be set so that excess solar energy can be used directly to load your vehicle. Manual and time -controlled modes offer even more flexibility to react to the needs of the electric vehicle depending on the system.
It has a fully programmable RGB glow ring around the loading connection, which depending on the power status (separated, loaded, loaded, loaded, etc.) shows different lighting effects in order to quickly determine the device status.https://youtu.be/uVVsdSj9pmg
EVC200300410
Victron ev Charger ns white front panel
The EV Charging Station NS can be operated both three -phase and single -phase. It delivers a maximum of 22 kW alternating current in three -phase operation and 7.3 kW in single -phase operation. The device is technically identical to the EV Charging station, but has a new, modern design that is available in 3 colors and has no built-in LCD screen. The initial setup, configuration and monitoring takes place from VictronConnect via Bluetooth and/or the integrated web interface via a WiFi access point or a WiFi-LAN. The charging station can be fully integrated into a GX device and a VRM Victron Energy VRM and remotely controlled via it. This EV Charging Station NS is not only fully integrated with a GX device and a VRM VICTRON Energy, but can also be set so that excess solar energy can be used directly to load your vehicle. Manual and time -controlled modes offer even more flexibility to react to the needs of the electric vehicle depending on the system.
It has a fully programmable RGB glow ring around the loading connection, which depending on the power status (separated, loaded, loaded, loaded, etc.) shows different lighting effects in order to quickly determine the device status.https://youtu.be/uVVsdSj9pmg