Shore Power Sockets
SHP301602000
Victron stainless steel built-in socket boat camper yacht shore connection 16A
The Victron shore power socket SHP301602000R 16A was specially developed for the boat and mobile home sector. This model features a high quality stainless steel bezel and is compatible with all Victron shore power cables.
Technical characteristics:
Degree of protection: IP 57
Facing Material: Stainless steel
Weight: 0.34kg
max voltage: 250V AC
max current: 16A
Standard: IEC 60309, 2p+E
Type coverage: PA6
Scope of delivery:
1x Victron SHP301602000R shore power socket 16A 250V stainless steel
Delivery time: 1-3 working days
SHP303202000
Victron stainless steel built-in socket shore connection boat mobile home yacht 32A
The Victron shore power socket SHP303202000 32A was specially developed for the boat and mobile home sector. This model has a high quality stainless steel cover and is compatible with all Victron shore power cables.
technical characteristics
Degree of protection: IP 57
Facing Material: Stainless Steel
Weight: 0.65
Max current: 32A
Standard: IEC 60309, 2p+E
Type cover: PA6
Scope of delivery:
1x Victron SHP303202000 shore power socket 32A stainless steel
Delivery time: 1-3 working days
data sheet
General
item number
8-67-009225
Manufacturer part number
SHP303202000
product type
high-quality 32A stainless steel junction box for shore power cables in the marine and caravan sector
Manufacturer
VictronEnergy
EAN
8719076026099
SHP301603000
Victron 16A polyamide installation socket boot motorhome yacht
The Victron country power socket SHP301603000R 16A was specially developed for the boat and motorhome area. This model has a high-resistant polyamide fading and is compatible with the Victron country power cables.
Technical characteristics
Protection class: IP 57
Dealing material: polyamide
Weight: 0.34kg
Max. Tension: 250V AC
Max. Electricity: 16A
STANDARD: IEC 60309, 2P+E
Typing cover: pa6
Scope of delivery:
1x Victron SHP301603000R Landstrom socket 16A 250V polyamide
700501610
Philippi stainless steel installation socket MP 16-10
The new land connection connector based on the CEE connectors has been specially designed for installation on the deck or at the rear of yachts. The compact waterproof stainless steel housing of the installation tank (IP 67) fits shapes and unremarkable on deck. 230V / 16A.
Outside diameter 87 mm, installation hole diameter 55 mm, installation depth 52 mm.
Attention: Conventional CEE coupling cans cannot be used in connection with the MP16-10!
SHP303204000
Victron coupling socket 32A/230V (2p/3w) for built-in appliance plug
The Victron Energy MP32-110 Removable Receptacle (MPN SHP303204000) is intended to be used with the MP32-10 panel mount connector. The cable size to be used depends on the current.
Characteristics
Connections: 2p + A
Voltage: 230V
Max current: 32A / 230V
Housing: PA 6
Connector pins / terminals: brass, nickel-plated
Recommended cable cross-section: 4mm²
Safety regulations and measures
The electrical installation must be switched off during installation
Install the shore power according to the installation instructions
Use cables with the appropriate cross-sections
Connections and safety precautions must be carried out in accordance with local regulations
installation instruction
To attach the connector to the cable, do the following:
Unscrew the connector and slide the housing onto the cable. The spout can be cut to size.
Insulate the cable a. Make sure the cable ends are clean and not corroded. If necessary, trim the cable back until clean wire is visible. Do not solder the ends of the cables!
Insert the cables into the correct color-coded terminal openings on the back of the inlet. Tighten the terminal screws to torque. Make sure there is no wire insulation under a clamp.
Tighten the strain relief.
Slide the housing over the connector. If necessary, apply a small amount of soap to the cable to make the plastic protector slide easily. Tighten the mounting screws securely.
Scope of delivery:
1x Victron coupling socket 32A (SHP303204000)