RV Solar System
4-01-012876
Offgridtec® MobileBlack 200W motorhome solar system 30A MPPT OLP PR Perc solar module
The offgridtec® MobileBlack series impresses with an appealing optical design in fine black and with its extremely convincing performance parameters. Starting with the OLP solar modules in the latest shingle construction and an outstanding cell efficiency of over 21%, up to the offgridtec® MPPT Pro dualladel, one can really speak of a successful selection and product composition from offgridtec.
200W Mobilbar Caravan Complete System
This complete system contains everything you need to charge your batteries mobile. In addition to charging your on -board battery, the dual controller contained in the set also enables the simultaneous loading of the starter battery because it has a corresponding side charging output. The scope of delivery includes extensive information material in which the structure and connection is explained step by step - this applies to both the technical connection, as well as the gluing of the holding spoilers and the roof implementation. The same roof implementation is probably one of the most critical areas, since the transition to the interior of the motorhome takes place. The implementation is made of the same material as the spoiler - the PEG screw connection corresponds to the protection class IP68 and is therefore absolutely waterproof if installed correctly.
Scope of delivery of the MobileBlack 200W Caravan solar system
2x offgridtec® OLP SolarModul 100W 12W Perc with shingle technology
1x offgridtec ABS cable passage 1-fold-black with waterproof PEG screw connection
2x offgridtec 55cm ABS assembly profiles (1 pair) - for attaching the solar modules in black
1x offgridtec 8m 2x6mm H07RNF - connecting cable solar module to solar loader control in caravan version
1x offgridtec 1.5m 2x6mm 30A battery connection cable - connecting cable solar loader controller to battery with battery pole terminals and M8 cable shoe connection
1x offgridtec® 30A MPPT Dual Solar loader with an side charging and AES switching exit
1x remote display / display for MPPT Pro Duo Delicacies
1x decalin adhesive set with decasyl MS-5 polymer adhesive, decavator adhesive mediator, cleaning cloth and operating instructions
1x single cartridge decasyl MS-5 glue from Dekalin
1x branch sockets for the parallel circuit of the solar modules
2x MC-4 extension cable 50cm to connect the connection cable on the module with the junction bushes
The offgridtec® Mppt Pro Duo 30a solar loader control
The MPPT per duore control can process a maximum charging current of 30A. This means that this system can theoretically be expanded to almost 400W solar module performance. In addition, the device has a secondary charging output which the starter battery can be loaded in parallel to the on -board battery during long periods - a feature that is certainly highly valued in the mobile home. So that the optimum can really be spoken of in terms of efficiency, the device still has an AES switching output- it enables the automatic switching of refrigerators with "AES" from gas to 12V operation with excess solar power.
Maximum charging current 30A - 390W module performance theoretically usable
30a load exit for 12V consumers directly at the loader
The clear distance display enables the controller to assemble at difficult to access in the vehicle without being restricted and overview of the system parameters
AES tax signal for car refrigerator to avoid waste of energy
100V maximum PV input voltage
Digital circuit control of the adaptive three -stage loading mode to improve the battery life duration
Max Power-Point Tracking Technology with ultra-fast tracking speed and guaranteed tracking efficiency of at least 99.5%
Dimensions: 24.7cm x 16.5 cm x 6.9cm (LXBXH)
Weight: 1.4kg
Self -consumption: 26mA at 12V
Active temperature compensation for optimal charge and guarantee of a high battery life
Support of all important battery types (lyric acid, AGM, gel, lifepo4)
Max. Effect: 98%
controllable via bluetooth (separate dongle Art.No. 8-01-011271 required)-only for Android devices
The 100W OLP solar module with the latest shingle technology
The 100W OLP Solar module with PERC technology used in the system impresses on the one hand with its unique modulus design with overlapping wafer arrangement (overlapping design), as well as the high module efficiency, which makes this module particularly interesting for applications on vehicles on vehicles because of the limited space.
Module voltage (VMP): 18.7V
Max. Electricity (IMP): 5.35a
Idle voltage (VOC): 22.1V
Short circuit current (ISC): 5.67A
Cell efficiency: 21.24%
Ambient temperature: -40 ° C - +85 ° C
Temperature coefficient performance: -0.43 %/° C
Temperature coefficient voltage: -0.34 %/° C
Temperature coefficient of electricity: -0.05 %/° C
Weight: 6.09kg
Dimensions: 988mm x 560mm x 35mm
Protection class connecting box: IP68 (waterproof)
Length of the pre -assembled connection cable: 55cm
Pre -assembled connector: MC4 compatible connector
Number of cells: 108 (6x18)
The professional solar assembly system
Spoile profiles are the first choice, especially for caravans and motorhomes when it comes to cleaning the solar modules. If you install the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Due to the closed construction of the spoilers, no branches or the like can get caught among the solar modules.Dimensions Spoiler: L x W x H: 55cm x 8.9cm (of which approx. 3cm contact surface module per spoiler) x 6.5cm.
The gluing
A correctly executed gluing is superior in the hard motor or boot insert of every screw connection. A strength of over 4 N/mm2 can be reached on painted or GRP surfaces, which would be a value on the adhesive surface that would never be accessible in the case of a screw connection into the thin aluminum or GRP. This adhesive set enables a layman to create an absolutely firm connection between spoilers and the respective surface.
The DEKALIN adhesive set contains all components that are necessary so that even the self-incorporation can establish a professional connection. Stainless steel screws for attaching the solar modules are as well included, as are a detailed adhesive instructions. In addition, you only need a commercially available hand lever press for cartridges and a lint -free cloth.
The ABS assembly profiles
Cable guides from the roof into the interior are always quite delicate, as it must be ensured that even after years everything is absolutely tight and remains tight.
Because even the smallest water entry can too often irreparable damage to the internal insulation and furnishings. Especially since the moisture is often noticed quite late. For this reason, the roof implementations were developed: the housings consist of the same UV and weather-resistant material as the assemblies offered in the online shop. They are extremely stable and absolutely sure -footed. The wide glue edge ensures optimal sealing. The implementations with the adhesive set is glued to use the solar assembly brackets. The housing can also be painted as desired and thus adapted to the surface on which they are to be attached to
The professional cabling set
All the necessary cables are delivered plug & play and are already pre -crimped with half -timbered tools. So you don't need to buy special pliers for the MC-4 plugs.
Individual system adjustment possible on request
We strive to implement any wish of our customers as best as possible. With the individual requirements for a solar system, this is of course not always possible 100%. If you want adjustments to one of our systems, just send us an email to info@offgridtec.com - Simply let us know briefly which system your request is related to, what change you would like to have (e.g. additional module, color spoiler, glue or implementation, other loaders, etc.) and you will soon receive a corresponding offer from our sales team.
Scope of delivery:
1x offgridtec 4-01-012876 offgridtec® Mobile black 200W 12V MPPT Caravan solar system
data sheet
Generally
item number
4-01-012876
delivery time
2-5 days
Manufacturer part number
012876
Available date
Product
Caravan Solar complete set 12V 230V
Manufacturer
Offgridtec
System performance
200W
System voltage
12V DC
Generator performance (WP)
100 WP
Tension (V)
12 V
Manufacturer solar module
Offgridtec
containing accessories
1 x roof implementation, 1.5m battery cable (battery to loader), 2 x 50cm MC-4 connecting cable, 8m connecting cable (solar module to loading controller), roof spoiler 55cm
supported battery types
Acid, gel, AGM, LIFEPO4
Max. Electricity (IMP)
5.35 a
Average daily yield
800Wh (expandable)
Module voltage (VMP)
18.7 V
Idle voltage (VOC)
22.1 V
Short circuit current (ISC)
5.67 a
Dimensions (LXBXH)
988 x 560 x 30 mm
Weight
20 kg
EAN
4250983259964
4-01-012877
Offgridtec® MobileBlack 155W mobile home solar system 30A MPPT OLP PERC solar module
The Offgridtec® MobileBlack series impresses with an attractive optical design in elegant black and with its extremely convincing performance parameters. Starting with the OLP solar modules in the most modern clapboard design and an outstanding cell efficiency of over 21%, up to the Offgridtec® MPPT Pro dual charge controller, one can really speak of a successful selection and product composition from Offgridtec.
155W MobileBlack Caravan complete system
This complete system contains everything you need to charge your batteries on the go. The dual controller included in the set not only allows you to charge your on-board battery, but also to charge the starter battery at the same time, as it has a corresponding secondary charging output. The scope of delivery includes extensive information material in which the assembly and connection are explained step by step - this applies to the technical connection as well as the bonding of the retaining spoiler and the roof duct. This roof duct is probably one of the most critical points, as this is where the transition to the interior of the mobile home takes place. The lead-through is made of the same material as the spoiler - the PEG screw connection corresponds to protection class IP68 and is therefore absolutely waterproof when installed correctly.
Scope of delivery of the MobileBlack 155W caravan solar system
1x Offgridtec® OLP solar module 155W 12W PERC with shingle technology
1x Offgridtec ABS cable bushing 1-way - black with waterproof PEG screw connection
1x Offgridtec 68cm ABS mounting profile (1 pair) - for attaching the solar modules in black
1x Offgridtec 8m 2x6mm H07RNF - connection cable solar module to solar charge controller in caravan version
1x Offgridtec 1.5m 2x6mm 30A battery connection cable - connection cable solar charge controller to battery with battery terminals and M8 cable lug connection
1x Offgridtec® 30A MPPT dual solar charge controller with secondary charging and AES switching output
1x remote display for MPPT Pro Duo charge controller
1x Dekalin adhesive set with Dekasyl MS-5 polymer adhesive, Dekavator adhesion promoter, cleaning cloth and operating instructions
1x MC-4 extension cable 50cm to connect a connection cable on the module to the module connection cable
The Offgridtec® MPPT Pro Duo 30A solar charge controller
The MPPT Pro duo controller can handle a maximum charging current of 30A. This means that this system can theoretically be expanded to almost 400W solar module output - taking into account the module selection (expansion only with panels of the same construction), however, an expansion by a maximum of 1 module would probably make the most sense for this system. In addition, the device has an auxiliary charging output via which the starter battery can be charged in parallel with the on-board battery if the device is not used for a longer period of time - a feature which is certainly very much appreciated in mobile homes. So that one can really talk about the optimum in terms of efficiency, the device also has an AES switching output - this enables refrigerators with "AES" to automatically switch from gas to 12V operation if there is excess solar power.
maximum charging current 30A - 390W module power theoretically usable
30A load output for 12V consumers directly on the charge controller
The clear remote display enables the controller to be installed in hard-to-reach places in the vehicle without restricting operation and overview of the system parameters
AES control signal for car refrigerator to avoid wasting energy
100V maximum PV input voltage
Digital circuit control of adaptive three-stage charge mode to improve battery life
Max power-point tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%
Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
Weight: 1.4KG
Own consumption: 26mA at 12V
Active temperature compensation for optimal charging and ensuring a long battery life
Support for all major battery types (lead acid, AGM, GEL, LiFePo4)
Max efficiency: 98%
Controllable via Bluetooth (separate dongle item no. 8-01-011271 required) - ONLY FOR ANDROID DEVICES
The 155W OLP solar module with the latest shingle technology
The 155W OLP solar module with PERC technology used in the system impresses on the one hand with its unique module design with an overlapping wafer arrangement (overlapping design), as well as with the high module efficiency, which this module uses for applications vehicles particularly interesting because of the limited space available.
module voltage (Vmp): 21.8V
Max. Current (Imp): 7.11A
Open circuit voltage (Voc): 25.7V
Short circuit current (Isc): 7.54A
Cell efficiency: 21.24%
Ambient temperature: -40°C - +85°C
Temperature coefficient power: -0.43%/°C
Temperature coefficient voltage: -0.34%/°C
Temperature coefficient current: -0.05%/°C
Weight: 9.37KG
Dimensions: 1310mm x 650mm x 35mm
Protection class junction box: IP68 (waterproof)
Length of the pre-assembled connection cable: 55cm
pre-assembled connectors: MC4 compatible connectors
Number of cells: 168 (8x21)
The professional solar mounting system
Spoile profiles are the first choice, especially for caravans and motorhomes, when it comes to neatly attaching the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Thanks to the closed design of the spoiler, no branches or the like can get caught under the solar modules.Dimensions spoiler: L x W x H: 55cm x 8.9cm (of which approx. 3cm contact surface module per spoiler) x 6.5cm.
The bonding
A correctly executed bond is superior to any screw connection in tough motor home or boat use. A strength of more than 4 N/mm2 can be achieved on painted or GRP surfaces. This would be a value calculated on the adhesive surface that would never be achievable with a screw connection in the thin aluminum or GRP carrier layer.This adhesive set enables even a layman to create an absolutely secure connection between spoilers and the respective surface
The Dekalin adhesive set contains all the components that are necessary so that even the do-it-yourself installer can create a professional connection. Stainless steel screws for attaching the solar modules are included, as are detailed gluing instructions. In addition, all you need is a commercially available hand lever press for cartridges and a lint-free cloth.
The ABS mounting profiles
Cable ducts from the roof to the interior are always quite tricky, as it has to be ensured that everything is absolutely tight even after years and stays tight.
Because even the smallest ingress of water can often lead to irreparable damage to the interior insulation and furnishings. Especially since the moisture is often not noticed until it is quite late. For this reason, the roof ducts were developed: The housings are made of the same UV and weather-resistant material as the mounting brackets offered in the online shop. They are extremely stable and absolutely sure-footed. The wide adhesive edge ensures an optimal seal. The bushings are glued with the adhesive set that you also use to glue the solar mounting brackets. The housings can also be painted as desired and thus adapted to the surface on which they are to be attached
The professional cabling set
All necessary cables are delivered plug & play and are already pre-crimped with specialist tools. So you don't need to buy any special pliers for the MC-4 connectors.
Individual system adaptation possible on request
We strive to implement every wish of our customers in the best possible way. With the individual requirements of a solar system, this is of course not always 100% possible. If you would like adjustments to one of our systems, simply send us an email and let us know which system your inquiry relates to, which change you would like (e.g. additional module, color spoiler, adhesive or bushing, other charge controller, etc .) and you will receive a corresponding offer from our sales team as soon as possible.
Scope of delivery:
1x Offgridtec 4-01-012877 Offgridtec® MobileBlack 155W 12V MPPT caravan solar system
data sheet
General
Article number
4-01-012877
Delivery time
1-3 days
Manufacturer part number
012877
Availability date
06.04.2021
Product type
Caravan solar complete set 12V 230V
manufacturer
Offgridtec
System performance
200W
system voltage
12V DC
generator power (Wp)
155Wp
Voltage (V)
12V
Solar module manufacturer
Offgridtec
included accessories
1 x roof duct, 1.5m battery cable (battery to charge controller), 8m connection cable (solar module to charge controller), roof spoiler 55cm
supported battery types
Acid, Gel, AGM, LiFePO4
max current (Imp)
5.35A
average daily yield
620Wh (expandable)
module voltage (Vmp)
18.7V
Open Circuit Voltage (Voc)
22.1V
Short circuit current (Isc)
5.67A
Dimensions (LxWxH)
1310x650x35mm
Weight
19 kg
EAN
4250983259971
.
4-01-002640
Offgridtec Solar Kit Basic Starter 100 Watt 12V
This inexpensive starter set contains everything you need to charge a battery (lead acid or VRLA lead acid) with solar power and use it in a 12V network. With the high-quality PWM 10A controller from the manufacturer EP-Solar, you can also supply your 12V consumers with power and use a variety of practical functions. With this charge controller and the remaining components, a large number of small solar projects can be implemented inexpensively.
In addition to the module, charge controller and cable, the set contains a large number of other small parts that are required to produce a proper uni battery connection cable and module connection cable. Also included are assembly instructions with pictures that we wrote specifically for these sets.
The system can be expanded by 1x100W module. On request, we can also send a stronger or different charge controller. Please ask us!
This reveals the set:
100Wp 12V monocrystalline solar module from Offgridtec10A PWM charge controller from EP-Solar15 meter solar cable 4mm² (for module connection cable)1 pair of MC4 plugs (for module connection cable)2 x Ferrules 4mm² (for module connection cable)2 x ferrules 6mm² (for battery connection cable)2 x ring cable lugs (for battery connection cable)2 x 1.5m solar cable 6mm² (for battery connection cable)1 pair of battery pole clamps (for battery connection cable )Information on the cables and small parts (plugs)In addition to the module and charge controller, the set also contains all the plugs, cables and small parts that you need to create the connection cables for your solar system.
The following parts belong to the module connection cable:
15m solar cable 4mm², MC4 connector, ferrules 4mm²The following parts belong to the battery connection cable
2 x 1.5m 6mm² solar cable, 6mm² ferrules, M8 ring cable lugs and battery pole clamps
4-01-012420
Offgridtec mPremium+ L 200W 12V MPPT caravan solar system
The Offgridtec mPremium+ L-200W 12V (MPN 4-01-012420) is a premium solar set for caravans and trailers. The expected daily output (April to October) is an average of 800 Wh/day (max. 1600 Wh on sunny days in Germany). Thanks to the supplied MPPT solar charge controller, almost all common battery types such as 12V AGM, gel or modern lithium can be easily charged according to their design. The system can be conveniently analyzed and even configured from a smartphone or tablet using a free app. Since the mPremium+ series is a further development of the popular mPremium series and differs only in the charge controller used, you can look forward to system components that have been tried and tested a thousand times over and that will ensure the power supply of your vehicle reliably for a long time.
200W complete caravan set: simple, proven, high-quality
The set contains all the components you need to be able to charge your batteries on the go. The special thing about our solar systems for mobile homes: We use an extra solid mounting system that can be easily glued on. The module can be unscrewed from the spoiler at any time, should you ever need to access the area under the solar module. This set is designed so that it can be expanded with another module in the same performance class.
We also paid special attention to quality at the critical point, the cable duct into the interior of the mobile home. The supplied cable bushing is made from the same stable material as the roof spoiler for the solar modules and is simply glued on. The connection is completely waterproof and will last for many, many years.
Scope of delivery of the mPremium+ L-200W caravan solar system
2x Offgridtec SWM 100W 12V - monocrystalline solar module equipped with SWM Solarworld cells
1x Offgridtec ABS cable bushing 1-way - white with waterproof PEG screw connection
2x Offgridtec 55cm ABS mounting profiles (1 pair) - for attaching the solar modules
1x Offgridtec 8m 2x6mm H07RNF - connection cable solar module to solar charge controller in caravan version
1x Offgridtec 1.5m 2x6mm 15A battery connection cable - connection cable solar charge controller to battery
1x Offgridtec battery pole clamps (1 pair)
1x MC4 Y connector
1x Victron Energy Smart MPPT 75/15 solar charge controller with Bluetooth module, load output and extensive configuration options.
1x assembly adhesive set with instructions and necessary accessories for pretreatment
competent help included if needed!
All integrated system components at a glance
The Victron SmartSolar MPPT 75/15
The Smartsolar 75/15 from Victron Energy (MPN SCC075015060R) is a MPPT solar charge controller with a maximum charging current of 15A for charging 12V and 24V batteries of various designs. Equipped with powerful charging algorithms and a Bluetooth-based communication interface, the 75/15 offers all the features you would expect from a modern high-end charge controller:
Integrated Bluetooth Smart: allows setup and monitoring with a smartphone or other Bluetooth-enabled device.
Ultra-fast Maximum Power Point Tracking (MPPT).
Advanced maximum power point detection in partial shading.
15A load output output
BatteryLife: intelligent battery management through load shedding.
Automatic battery voltage detection
Flexible loading algorithms and much more.
Overheat protection and derating at high temperatures.
The Offgridtec SWM-100W 12V solar module
In the production of our modules, only monocrystalline solar cells of the highest quality are processed. Wavers are currently being used by the German quality manufacturer Solarworld. The module has a frame made of anodized aluminum and has a specially hardened ESG solar glass, which makes it particularly resistant to external influences (weather, storm, hail, etc.).
The dimensions of the solar module are: 1200mm x 540mm x 35mm (LxWxH).
professional solar mounting system
Spoiler profiles are the first choice, especially for caravans and motorhomes, when it comes to neatly attaching the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Thanks to the closed construction of the spoilers, no branches or the like can get caught under the solar modules.
Dimensions spoiler: L x W x H: 55cm x 8.9cm (of which approx. 3cm contact surface module per spoiler) x 6.5cm.
The bonding
A correctly executed bond is superior to any screw connection in tough motor home or boat use. A strength of more than 4 N/mm2 can be achieved on painted or GRP surfaces. Calculated on the adhesive surface, this would be a value that would never be achievable with a screw connection in the thin aluminum or GRP carrier layer. This adhesive set enables even a layperson to create an absolutely secure connection between spoilers and the respective surface.
The gluing set contains all the components that are necessary so that even the do-it-yourself installer can create a professional connection. Stainless steel screws for attaching the solar modules are included, as are detailed gluing instructions. In addition, all you need is a commercially available hand lever press for cartridges and a lint-free cloth.
The ABS mounting profiles
2 pairs of Offgridtec 55cm ABS mounting profiles
suitable stainless steel screws to attach the module to the profiles
1x Offgridtec ABS cable roof bushing for leading the solar cable from the vehicle roof into the interior
Cable ducts from the roof to the interior are always quite tricky, as it has to be ensured that everything is absolutely tight even after years and stays tight.
Because even the smallest ingress of water can often lead to irreparable damage to the interior insulation and furnishings. Especially since the moisture is often not noticed until it is quite late. For this reason, the roof ducts were developed: The housings are made of the same UV and weather-resistant material as the mounting brackets offered in the online shop. They are extremely stable and absolutely sure-footed. The wide adhesive edge ensures an optimal seal. The bushings are glued with the adhesive set that you also use to glue the solar mounting brackets. The housings can also be painted as desired and thus adapted to the surface on which they are to be attached
The professional cabling set
All necessary cables are delivered plug & play and are already pre-crimped with specialist tools. So you don't need to buy any special pliers for the MC-4 connectors.
1x Offgridtec 8m 2x6mm H07RN-F connection cable solar module to solar charge controller complete with appropriately equipped cable ends
1x Offgridtec 1.5m 2x6mm battery connection cable with flat fuse holder, matching ATO fuse and a pair of pole terminals. The cable fits M8 screw terminals or batteries with round poles.
1x MC4 Y branch socket set
Individual system adaptation possible on request
If you would like a different charge controller from our range, for example to charge board and service batteries together via solar, or if the cables should have a different length, you are welcome to contact us at any time . The color of the spoilers can also be changed from white to black. A short request for an offer with article number and change request to our customer service is sufficient.
Scope of delivery:
1x Offgridtec 4-01-012420 Offgridtec® mPremium+ L-200W 12V MPPT caravan solar system
1x instruction manual
including all components listed above
data sheet
General
Article number
4-01-012420
Manufacturer part number
012420
Availability date
03/15/2021
manufacturer
Offgridtec
Weight
25.04kg
EAN
4250983256840
.
4-01-002600
Offgridtec® BasicPremium-L100W solar system 12V/24V complete system
The basicPremium-L 100W solar system 12V 24V from Offgridtec (MPN 4-01-002600) is based on a high-quality, monocrystalline 100 Wp solar module and the convenient PWM-12/24-20A charge controller with LCD display. The basicPremium series is also supplied with a suitable 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable - each from the Pro-Connect series. The average daily yield from March to October is around 400 Wh*. The solar output of the system can also be conveniently increased by several modules later if your needs increase. The system offers all the basic components that are required to charge your battery with self-produced solar power. This composition makes you the perfect basis for a multitude of possible solar applications.
High-quality basic set for a wide variety of applicationsOffgridtec solar sets from the basicPremium series consist of the basic components that every self-sufficient solar power system requires, regardless of whether the system is to be used in a garden shed, garage or in a mobile area . We constantly rely on the high quality of all delivered components so that reliability and a long life expectancy of the system are guaranteed. Our 100W solar module is equipped with the best monocrystalline cells and is produced and tested using the latest production technology. The remaining components of the set also follow this quality standard: The plug & play connection cables "made in Germany" are designed in such a way that the installation effort is kept as low as possible without having to compromise on the connection quality. With its convenient display and current charging algorithms, the PWM-12/24-20A Pro charge controller ensures that the system is easy to use and your batteries are perfectly charged. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide variety of applications.
Solar system applications12V or 24V DC power supply in garden sheds, allotments and similar objectsautonomous systems for outdoor lighting applicationsautonomous monitoring and communication systems or weather stationscharging of smartphones, tablets or others Devices with 12V / 5V DC power supplyPerformance parameters at a glanceaverage daily yield: 400 WhExpandability of the solar power when using the same panel to max. 200 Wp (at 24V = 500 Wp)Available power outlets: 5V DC and 12V DC on the charge controller (230V only with optional voltage converter)Components of the basicPremium-L 100W solar system 12V 24V1 x Offgridtec 100W monocrystalline 12V 100 Wp solar moduleRated output: 100 Wp, part number: 3- 01-001245Operating voltage (Vmp) 20 V, operating current (Imp) 5 AEquipped with high-quality monocrystalline cellsMinimized drop in performance when shaded by integrated bypass diodeSolid: frame made of elo xed aluminum + specially hardened ESG solar glassMC4 connector, dimensions (WxLxH): 1030 x 520 x 35 mm, weight: 7.5 kg1 x PWM-12/24-20 Pro solar controller 12V/24Vmax. Charging current 20 A, max. PV power at 12V / 24V system: 260 W / 520 Wmodern, 3-stage PWM charge control for gentle and efficient charging of your battery(s)3 battery types adjustable: AGM, GEL, and liquid lead acidcan be operated intuitively using 2 buttons directly on the devicelarge LCD display with numerous display options, including kWh meter2 USB ports with a maximum output power of 2.4Aload output with numerous configuration options, e.g.for light controlTemperature-compensated battery charging (optional temperature sensor required)1x 8m 2x6mm² solar connection cable controller/solar moduleTWIN cable, plug & play - ready to useMC4 connector on the solar module side, ferrules On the charge controller side immediately ready for usewire cross section: 2x6mm², length: 1.5mincluding flat fuse holder with built-in 30 A ATO fusewire end ferrules on the charge controller side, M8 ring cable lugs on the battery sideincluding battery pole clamps for connection to round pole terminalsflexible and very easy to installThe system is very easy to install, even by people who have had little experience with solar technology. The cables are all delivered with Plug & Play, i.e. ready for connection. All you have to do is connect the components and power production can begin.
expandable, adaptableLike every Offgridtec system, the basicPremium-S can also be individually adapted and modified to your requirements. Our technical sales department looks forward to your inquiry. Any costs incurred should be requested from customer service.
Scope of delivery:
1x Offgridtec 4-01-002600 basicPremium-L 100W 12V 24V solar system1x operating instructionsincluding all components listed above
.
4-01-002710
Offgridtec mPremium L-100W 12V mobile home solar system
The Offgridtec 100W Premium-L 12V (MPN 4-01-002710) is the perfect solar set for the self-sufficient power supply in your mobile home or caravan and lets really nothing to be desired. Installation takes less than two hours - practiced hands are much faster. The expected daily output (April to October) is an average of 400Wh/day (max. 850 Wh on sunny days in Germany) The system is suitable for charging AGM, GEL or lead acid batteries.
100W motorhome complete set: simple, proven, high quality
The set contains all the components you need to charge your batteries on the go. The special thing about our solar systems for mobile homes: We use an extra solid mounting system that can be easily glued on. The module can be unscrewed from the spoiler at any time, should you ever need to access the area under the solar module. This set is designed so that it can be expanded with another module in the same performance class.
We also paid special attention to quality at the critical point, the cable duct into the interior of the mobile home. The supplied cable bushing is made from the same stable material as the roof spoiler for the solar modules and is simply glued on. The connection is completely waterproof and will last for many, many years.
Key performance characteristics
As the only manufacturer, we offer you a complete motorhome solar system, in which all components are supplied from our own production - of course, as usual, in the highest Offgridtec quality
The premium mobile system class is probably the best-selling mobile home solar system on the market and has already been successfully installed thousands of times. In addition, the premium mobile series was established on the market more than 5 years ago and has been continuously improved on the basis of customer experiences and constantly supplemented with technical innovations.
As a customer, you benefit from a product that is highly sophisticated and reliable and at
Components of the Offgridtec 100W Premium L 12V
1x Offgridtec PWM-Pro 12/24-20 - 12V PWM solar charge controller with LCD display, load output, USB and much more.
1x Offgridtec 100W 12V - monocrystalline solar module
1x Offgridtec single cable bushing - white with waterproof PEG screw connection
1x Offgridtec 55cm mounting roof spoiler set (1 pair) - for attaching the solar modules
1x Offgridtec 8m 2x6mm H07RNF - connecting cable solar module to solar charge controller in camper design
1x Offgridtec 1.5m 2x6mm 30A battery connection cable - connection cable solar charge controller to battery
1x Offgridtec battery pole clamps (1 pair)
1x assembly adhesive set with instructions and necessary accessories for pretreatment
competent help included if needed!
The Offgridtec PWM-PRO solar charge controller
The Offgridtec PWM-Pro charge controller series offers a large, comfortable LCD display and works with the latest charging technologies. A large display informs the user with the help of symbols all operating states. The state of charge is shown visually in the manner of a fuel gauge. data, such as B. voltage, current and state of charge, can also be shown digitally as a number on the display. The controller also has a KWh counter that the user can reset himself. A controllable load output and 2 USB 5V outputs are also integrated in the controller and supply your 12V and 5V DC consumers with power. For the full range of functions, please refer to the charge controller documentation
The Offgridtec 100W 12V solar module
In the production of our modules, only monocrystalline solar cells of the highest quality are processed. The module has a frame made of anodized aluminum and has a specially hardened ESG solar glass, which makes it particularly resistant to external influences (weathering, etc.).
The expected daily output (April to October): an average of 400Wh/day (max. 850 Wh on sunny days in Germany)
Dimensions solar module: 1030 x 520 x 35 mm (HxWxD).
Professional solar mounting system
Spoiler profiles are the first choice, especially for caravans and motorhomes, when it comes to neatly attaching the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Thanks to the closed design of the spoilers, no branches or the like can get caught under the solar modules.
Spoiler dimensions: L x W x H: 54.5cm x 8.9cm (of which approx. 3cm contact surface module per spoiler) x 6.5cm.
The bonding
A correctly executed bond is superior to any screw connection in tough motor home or boat use. A strength of more than 4 N/mm2 can be achieved on painted or GRP surfaces. Calculated on the adhesive surface, this would be a value that would never be achievable with a screw connection in the thin aluminum or GRP carrier layer. This adhesive set enables even a layman to create an absolutely solid connection between spoilers and the respective surface.
Components of the solar mounting system
The ABS mounting profiles
Cable ducts from the roof to the interior are always quite tricky, because it has to be ensured that everything is absolutely tight even after years and stays tight
Because even the smallest ingress of water can often lead to irreparable damage to the interior insulation and furnishings. Especially since the moisture is often not noticed until it is quite late. For this reason, the roof ducts were developed: The housings are made of the same UV and weather-resistant material as the mounting brackets offered in the online shop. They are extremely stable and absolutely sure-footed. The wide adhesive edge ensures an optimal seal. The bushings are glued with the adhesive set that you also use to glue the solar mounting brackets. The housings can also be painted as desired and thus adapted to the surface on which they are to be attached
1 pair of Offgridtec 55cm ABS mounting profiles
suitable stainless steel screws to attach the module to the profiles
1x Offgridtec ABS cable roof bushing for leading the solar cable from the vehicle roof into the interior
The professional cabling set
All necessary cables are already pre-crimped with specialist tools. So you don't need to buy any special pliers for the MC-4 connectors. The cable has a length of 8m and houses 2 wires 6mm²
Components of the wiring set
1x Offgridtec 8m 2x6mm H07RN-F connection cable solar module to solar charge controller complete with appropriately equipped cable ends
1x Offgridtec 1.5m 2x6mm battery connection cable with flat fuse holder, matching ATO fuse and a pair of pole terminals. The cable fits M8 screw terminals or batteries with round poles.
individual system adaptation possible on request
If you want a different charge controller from our range, for example to charge board and service batteries together via solar, or if you want the cables to have a different length , you are welcome to contact us at any time. The color of the spoilers can also be changed from white to black. Simply send a request for a quote with the article number and change request to our customer service
Scope of delivery:
1x Offgridtec 4-01-002710 Premium-L 100W 12V mobile home solar system with all the above components
1x operating instructions
Data sheet
General
Article number
4-01-002710
Manufacturer part number
002710
Availability date
15.03.2021
Product type
Solar power system
manufacturer
Offgridtec
System performance
100W (expandable)
System voltage
12V DC
Dimensions module
1200mm x 540mm x 35mm
max load current
15A
cell type
monocrystalline
included accessories
55110,55101,55113,55112,55111
Charge controller included
Steca PR 1515
max. Current (Imp)
5.62A
average daily yield
400Wh (expandable)
module voltage (Vmp)
17.8V
connection options
12V/DC
Power (Pmax)
100W
open circuit voltage (Voc)
22.3V
Short circuit current (Isc)
6.07A
Weight
13.8kg
EAN
4260297850672
.
4-01-002620
Offgridtec BasicPremium-S 50W solar system 12V/24V
The basicPremium-S 50W solar system 12V 24V from Offgridtec (MPN 4-01-002620) is based on a high-quality, monocrystalline 50 Wp solar module and the convenient PWM-10/24 10A charge controller with LCD display. The basicPremium series is also supplied with a suitable 8m solar connection cable (solar module to charge controller) and 1.5m battery connection cable - each from the Pro-Connect series. The average daily yield from March to October is around 200 Wh*. The solar output of the system can also be easily increased later if your needs increase. The system offers all the basic components that are required to charge your battery with self-produced solar power. This compilation makes you the perfect basis for a multitude of possible solar applications.
High-quality basic set for a wide variety of applicationsOffgridtec solar sets from the basicPremium series consist of the basic components that every self-sufficient solar power system requires, regardless of whether the system is in a summer house, garage or mobile area should be used. We constantly rely on the high quality of all delivered components so that reliability and a long life expectancy of the system are guaranteed. Our 50W solar module is equipped with the best monocrystalline cells and is produced and tested using the latest production technology. The remaining components of the set also follow this quality standard: The plug & play connection cables "made in Germany" are designed in such a way that the installation effort is kept as low as possible without having to compromise on the connection quality. With its convenient display and current charging algorithms, the PWM-10/24 10A Pro charge controller ensures that the system is easy to use and your batteries are perfectly charged. The basicPremium family is a mature product that has proven itself thousands of times in practice and offers the ideal starting point for a wide variety of applications.
Solar system applications12V or 24V DC power supply in garden sheds, allotments and similar objectsAutonomous systems for outdoor lighting applicationsAutonomous monitoring and communication systems or weather stationsCharging smartphones, Tablets or other devices with 12V / 5V DC power supplyPerformance parameters at a glanceaverage daily yield: 200 WhExpandability of solar power when using the same panel to max. 100 Wp (at 24V = 250 Wp) Available power outlets: 5V DC and 12V DC on the charge controller (230V only with optional voltage converter)Components of the basicPremium-S 50W solar system 12V 24V1 x Offgridtec monocrystalline 12V 50 Wp solar moduleRated output: 50 Wp, part number: 3-01-001260Operating voltage (Vmp) 17.8 V, operating current (Imp) 2.81 Aequipped with ´high-quality monocrystalline cellsminimized drop in performance when shaded by integrated bypass diodesolid: frame from e Anodized aluminum + specially hardened ESG solar glassMC4 connector, dimensions (WxLxH): 650 x 505 x 30 mm, weight: 3.8 kg1 x PWM-10/24 10 Pro solar controller 12V/24Vmax. Charging current 10 A, max. PV power at 12V / 24V system: 130 W / 260 Wmodern, 3-stage PWM charge control for gentle and efficient charging of your battery(s)3 battery types adjustable: AGM, GEL, and liquid lead acidcan be operated intuitively using 2 buttons directly on the devicelarge LCD display with numerous display options, including kWh meter2 USB ports with a maximum output power of 2.4Aload output with numerous configuration options, e.g.for light controlTemperature-compensated battery charging (optional temperature sensor required)1x 8m 2x6mm² solar connection cable controller/solar moduleTWIN cable, plug & play - ready to useMC4 connector on the solar module side, ferrules on the charge controller sideHighest quality solar cable: TWIN cableCore cross-section: 2x6mm², length: 8m1x 1.5 2x6mm² 30 A battery connection cable controller/battery (Offgridtec,)Plug & Play - immediately ready for usewire cross section: 2x6mm², length: 1.5mincluding flat fuse holder with built-in 30 A ATO fusewire end ferrules on the charge controller side, M8 ring cable lugs on the battery sideincluding battery pole clamps for connection to round pole terminalsflexible and very easy to installThe system is very easy to install, even by people who have had little experience with solar technology. The cables are all delivered with Plug & Play, i.e. ready for connection. All you have to do is connect the components and power production can begin.
expandable, adaptableLike every Offgridtec system, the basicPremium-S can also be individually adapted and modified to your requirements. Our technical sales department looks forward to your inquiry. Any costs incurred can be requested from customer service.
Scope of delivery:
1x Offgridtec 4-01-002620 basicPremium-S 50W 12V 24V solar system1x operating instructionsincluding all components listed above
.
4-01-012875
Offgridtec® MobileBlack 100W motorhome solar system 30A MPPT OLP PERC solar panel
The Offgridtec® MobileBlack series impresses with an attractive optical design in elegant black and with its extremely convincing performance parameters. Starting with the OLP solar modules in the most modern clapboard design and an outstanding cell efficiency of over 21%, up to the Offgridtec® MPPT Pro dual charge controller, one can really speak of a successful selection and product composition from Offgridtec.
100W MobileBlack Caravan complete system
This complete system contains everything you need to charge your batteries on the go. The dual controller included in the set not only allows you to charge your on-board battery, but also to charge the starter battery at the same time, as it has a corresponding secondary charging output. The scope of delivery includes extensive information material in which the assembly and connection are explained step by step - this applies to the technical connection as well as the bonding of the retaining spoiler and the roof duct. This roof duct is probably one of the most critical points, as this is where the transition to the interior of the mobile home takes place. The lead-through is made of the same material as the spoiler - the PEG screw connection corresponds to protection class IP68 and is therefore absolutely waterproof when installed correctly.
Scope of delivery of the MobileBlack 100W caravan solar system
1x Offgridtec® OLP solar module 100W 12W PERC with shingle technology
1x Offgridtec ABS cable bushing 1-way - black with waterproof PEG screw connection
1x Offgridtec 55cm ABS mounting profile (1 pair) - for attaching the solar modules in black
1x Offgridtec 8m 2x6mm H07RNF - connection cable solar module to solar charge controller in caravan version
1x Offgridtec 1.5m 2x6mm 30A battery connection cable - connection cable solar charge controller to battery with battery terminals and M8 cable lug connection
1x Offgridtec® 30A MPPT dual solar charge controller with secondary charging and AES switching output
1x remote display for MPPT Pro Duo charge controller
1x Dekalin adhesive set with Dekasyl MS-5 polymer adhesive, Dekavator adhesion promoter, cleaning cloth and operating instructions
1x MC-4 extension cable 50cm for connecting a connection cable on the module to the module connection cable
The Offgridtec® MPPT Pro Duo 30A solar charge controller
The MPPT Pro duo controller can handle a maximum charging current of 30A. This means that this system can theoretically be expanded to almost 400W solar module output. In addition, the device has an auxiliary charging output via which the starter battery can be charged in parallel with the on-board battery if the device is not used for a longer period of time - a feature which is certainly very much appreciated in mobile homes. So that one can really talk about the optimum in terms of efficiency, the device also has an AES switching output - this enables refrigerators with "AES" to automatically switch from gas to 12V operation if there is excess solar power.
maximum charging current 30A - 390W module power theoretically usable
30A load output for 12V consumers directly on the charge controller
The clear remote display enables the controller to be installed in hard-to-reach places in the vehicle without restricting operation and overview of the system parameters
AES control signal for car refrigerator to avoid wasting energy
100V maximum PV input voltage
Digital circuit control of adaptive three-stage charge mode to improve battery life
Max power-point tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%
Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
Weight: 1.4KG
Own consumption: 26mA at 12V
Active temperature compensation for optimal charging and ensuring a long battery life
Support for all major battery types (lead acid, AGM, GEL, LiFePo4)
Max efficiency: 98%
Controllable via Bluetooth (separate dongle item no. 8-01-011271 required) - ONLY FOR ANDROID DEVICES
The 100W OLP solar module with the latest shingle technology
The 100W OLP solar module with PERC technology used in the system impresses on the one hand with its unique module design with an overlapping wafer arrangement (overlapping design), as well as with the high module efficiency, which this module uses for applications vehicles particularly interesting because of the limited space available.
module voltage (Vmp): 18.7V
Max. Current (Imp): 5.35A
Open circuit voltage (Voc): 22.1V
Short circuit current (Isc): 5.67A
Cell efficiency: 21.24%
Ambient temperature: -40°C - +85°C
Temperature coefficient of power: -0.43%/°C
Temperature coefficient voltage: -0.34%/°C
Temperature coefficient current: -0.05%/°C
Weight: 6.09KG
Dimensions: 988mm x 560mm x 35mm
Protection class junction box: IP68 (waterproof)
Length of the pre-assembled connection cable: 55cm
pre-assembled connectors: MC4 compatible connectors
Number of cells: 108 (6x18)
The professional solar mounting system
Spoile profiles are the first choice, especially for caravans and motorhomes, when it comes to a clean attachment of the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Thanks to the closed design of the spoiler, no branches or the like can get caught under the solar modules.Dimensions spoiler: L x W x H: 55cm x 8.9cm (of which approx. 3cm contact surface module per spoiler) x 6.5cm.
The bonding
A correctly executed bond is superior to any screw connection in tough motor home or boat use. A strength of more than 4 N/mm2 can be achieved on painted or GRP surfaces. This would be a value calculated on the adhesive surface that would never be achievable with a screw connection in the thin aluminum or GRP carrier layer.This adhesive set enables even a layperson to create an absolutely secure connection between spoilers and the respective surface
The Dekalin adhesive set contains all the components that are necessary so that even the do-it-yourself installer can create a professional connection. Stainless steel screws for attaching the solar modules are included, as are detailed gluing instructions. In addition, all you need is a commercially available hand lever press for cartridges and a lint-free cloth.
The ABS mounting profiles
Cable ducts from the roof to the interior are always quite tricky, because it has to be ensured that everything is absolutely tight even after years and stays tight.
Because even the smallest ingress of water can often lead to irreparable damage to the interior insulation and furnishings. Especially since the moisture is often not noticed until it is quite late. For this reason, the roof ducts were developed: The housings are made of the same UV and weather-resistant material as the mounting brackets offered in the online shop. They are extremely stable and absolutely sure-footed. The wide adhesive edge ensures an optimal seal. The bushings are glued with the adhesive set that you also use to glue the solar mounting brackets. The housings can also be painted as desired and thus adapted to the surface on which they are to be attached
The professional cabling set
All necessary cables are delivered plug & play and are already pre-crimped with specialist tools. So you don't need to buy any special pliers for the MC-4 connectors.
Individual system adaptation possible on request
We try to implement every wish of our customers in the best possible way. With the individual requirements for a solar system, this is of course not always 100% possible. Therefore, if you wish to make adjustments to one of our systems, simply send us an email and let us know which system your request relates to, what change you would like (e.g. additional module, color spoiler, adhesive or bushing, other charge controller, etc .) and you will receive a corresponding offer from our sales team as soon as possible.
Scope of delivery:
1x Offgridtec 4-01-012875 Offgridtec® MobileBlack 100W 12V MPPT caravan solar system
data sheet
General
Article number
4-01-012875
Delivery time
2-5 days
Manufacturer part number
012875
Availability date
31.03.2021
Product type
Caravan solar complete set 12V 230V
manufacturer
Offgridtec
System performance
100W
System voltage
12V DC
Generator power (Wp)
100Wp
Voltage (V)
12V
Solar module manufacturer
Offgridtec
Included accessories
1 x roof duct, 1.5m battery cable (battery to charge controller), 8m connection cable (solar module to charge controller), roof spoiler 55cm
Charge controller included
Offgridtec MPPT Dual 30A solar charge controller
supported battery types
Acid, Gel, AGM, LiFePO4
max current (pulse)
5.35A
average daily yield
400Wh (expandable)
module voltage (Vmp)
18.7V
Open circuit voltage (Voc)
22.1V
Short circuit current (Isc)
5.67A
Dimensions (LxWxH)
988x560x30mm
Weight
12.5 kg
EAN
4250983259957
.
4-01-014250-002
Offgridtec mPremium+ XXL 400W 12V with Victron SmartSolar MPPT 100/30 Caravan Solar System 600W
The Offgridtec mPremium+ series is a premium solar set for caravans and mobile homes. The expected daily output (April to October) is an average of 1600Wh/day (XXL 400W) or 2400Wh/day (XXL 600W) (depending on the selection) on sunny days in Germany). Thanks to the supplied MPPT solar charge controller, almost all common battery types such as 12V AGM, gel or modern lithium can be easily charged according to their design. The system can be conveniently analyzed and even configured from a smartphone or tablet using a free app. Since the mPremium+ series is a further development of the popular mPremium series and differs only in the charge controller used, you can look forward to system components that have been tried and tested a thousand times over and that will ensure the power supply of your mobile phone reliably for a long time.
Caravan complete set: simple, proven, high-quality
The set contains all the components you need to be able to charge your batteries on the go. The special thing about our solar systems for mobile homes: We use an extra solid mounting system that can simply be glued on. The module can be unscrewed from the spoiler at any time if you need to access the area under the solar module.
We also paid special attention to quality at the critical point, the cable duct into the interior of the mobile home. The supplied cable bushing is made from the same stable material as the roof spoiler for the solar modules and is simply glued on. The connection is completely waterproof and will last for many, many years.
Scope of delivery of the mPremium+ XXL caravan solar system
Offgridtec 200W MONO 40V - monocrystalline solar module (2x or 3x depending on selection)Offgridtec 68cm ABS mounting profile white - for attaching the solar modules (2x or 3x depending on selection)Offgridtec branch sockets Y -Plugs (pair) (depending on selection 2x or 3x)1x Victron SmartSolar MPPT 100/30 or Victron SmartSolar MPPT 100/501x Offgridtec 1.5m 10mm² battery connection cable - with MIDI fuse holder1x 8m Offgridtec solar connection cable 2x6mm²1x Offgridtec roof duct 1-way white for cable 13-18mm1x Dekalin Dekasyl MS-5 adhesive set whiteDekalin DEKAsyl MS-5 single cartridge white (depending on selection 1x or 2x)MIDI fuse 40A/58V or MIDI fuse 60A/58Vadditional for 600W variant: 4x 50cm MC4 connection cable 6mm²competent help included if required!All integrated system components at a glance
The Victron SmartSolar MPPT 100/30 or MPPT 100/50
The Smartsolar 100/30 and 100/50 from Victron Energy is a MPPT solar charge controller with a maximum charging current of 30A or 50A for charging 12V and 24V batteries of various designs. Equipped with powerful charging algorithms and a Bluetooth-based communication interface, both charge controllers offer all the features you would expect from a modern high-end charge controller:
Integrated Bluetooth Smart: allows setup and monitoring with a smartphone or other Bluetooth-enabled device.Ultra-fast Maximum Power Point Tracking (MPPT).Advanced maximum power point detection in partial shading.30A or 50A load output depending on selection.BatteryLife: intelligent battery management through load shedding.Automatic battery voltage detection.Flexible charging algorithms and much more.Overheating protection and load reduction at high temperatures.The Offgridtec 200W MONO 40V solar module
In the production of our modules, only monocrystalline solar cells of the highest quality are processed. The module is particularly resistant to external influences (weathering, etc.).
The expected daily output (per 1 module from April to October): an average of 800Wh/dayDimensions of the solar module: 1500mm x 680mm x 35 mm (HxWxD)
Professional solar mounting system
Spoiler profiles are the first choice, especially for caravans and mobile homes, when it comes to neatly attaching the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Thanks to the closed design of the spoiler, no branches or the like can get caught under the solar modules.Dimensions spoiler: L x W x H: 68cm x 8.9cm (of which approx. 3cm contact surface module per spoiler) x 6.5cm.
The bonding
A correctly executed bond is superior to any screw connection in tough motor home or boat use. A strength of more than 4 N/mm2 can be achieved on painted or GRP surfaces. This would be a value calculated on the adhesive surface that would never be achievable with a screw connection in the thin aluminum or GRP carrier layer. This adhesive set enables even a layman to create an absolutely secure connection between spoilers and the respective surface.
The gluing set contains all the components necessary for even the do-it-yourself installer to create a professional connection. Stainless steel screws for attaching the solar modules are included, as are detailed gluing instructions. In addition, all you need is a commercially available hand lever press for cartridges and a lint-free cloth.
The ABS mounting profiles
Offgridtec 68cm ABS mounting profilesuitable stainless steel screws for attaching the module to the profile1x Offgridtec ABS cable roof bushing for leading the solar cable from the vehicle roof into the interiorcable bushings from the roof into the interior always quite tricky, since it has to be ensured that even after years everything is absolutely tight and stays tight.
Because even the smallest ingress of water can often lead to irreparable damage to the interior insulation and furnishings. Especially since the moisture is often not noticed until it is quite late. For this reason, the roof ducts were developed: The housings are made of the same UV and weather-resistant material as the mounting brackets offered in the online shop. They are extremely stable and absolutely sure-footed. The wide adhesive edge ensures an optimal seal. The bushings are glued with the adhesive set that you also use to glue the solar mounting brackets. The housings can also be painted as desired and thus adapted to the surface on which they are to be attached
The professional cabling set
All necessary cables are delivered plug & play and are already pre-crimped with specialist tools. So you don't need to buy any special pliers for the MC-4 connectors.
Scope of delivery:
1x Offgridtec 4-01-014250-001 Offgridtec® mPremium+-XXL+ 400W 12V MPPT caravan solar system1x operating instructions
or
1x Offgridtec 4-01-014250-002 Offgridtec® mPremium+-XXL+ 600W 12V MPPT caravan solar system1x operating instructions.
Variants from €642.00*
4-01-007910
Offgridtec Basic XS 30W 12V
The Offgridtec Basic XS 30W 12V is a complete, small solar system and is suitable for a variety of applications due to its compact dimensions and functionality. As a system house with a focus on the off-grid area, we only offer you well-engineered, top-quality branded products in this set. In addition, our systems offer a decent price advantage compared to buying the supplied components individually.
Our Basic series comes with the proven Plug & Play professional connection cable and can be put into operation within a few minutes without special tools. The supplied LS0512EU 5A from EP-Solar, with its 3 supported battery types (AGM, GEL, lead acid) and the 1.2A USB output, ensures high flexibility and comfort - unique in this price range!
The included Offgridtec solar module is equipped with monocrystalline solar cells and the other components of the module also come from industry-leading companies with a lot of long-term experience and expertise in their fields. With this, Offgridtec offers its customers a top-class solar module which is one of the best in terms of quality in this performance class!
System Properties / Highlights
- monocrystalline 30W 12V Offgridtec solar panel- high cell efficiency: >18.43%- powerful 5A charge controller from EP-Solar with USB port and 5A 12V consumer output- 3 supported battery types adjustable (AGM, GEL, liquid lead acid)- Complies with ISO 9001:2008, RoHS, IEC 61215, Safety class2- incl. 8m XLR-S twin connection cable for connecting solar module and charge controller (plug & play)- incl. 1.5m professional connection cable- approx. 120Wh average daily yield Apr-Oct and up to 300W on perfect sunny days- expandable by 5 modules to 180W solar output
Solar module performance guarantee
5 year product guarantee
3 years to 100% of the initial performance7 years to 95% of the initial performance12 years to 90% of the initial performance20 years to 85% of the initial performance25 years to 80 % of initial power
Scope of delivery
1x Offgridtec® 001530 30W 12V mono1x EP-Solar® 5A LS0512EU 10A 12V charge controller with USB port, operating instructions1x Offgridtec® 8m 2x2.5mm professional connection cable for connecting solar panel to charge controller , tailored to the connection terminal of the 001530 30W1x Offgridtec® 1.5m 5A 2x2.5mm universal battery connection cable with M6 ring cable lug and battery pole clamps