2H-FURD-397Z
MC4 connector pair - socket + plug 4-6mm² type 4 PV-KBT4/6I
This economy set consists of a male and a female MC4 connector with the respective inner workings. These are original MC4 connectors from Stäubli
Technical data
Touch protection, unplugged IP2X
degree of protection, plugged in IP67
Temperature range -40° ...90° C
Insulation material PA
Snap-in locking system
Cable strain relief according to IEC 61984 (06.2001)
Contact system MC contact lamellas
Contact material copper, tinned
flame class UL94-V0
Protection class II
system voltage up to 1000V
Rated current up to 30A
8-01-006295
Lapp ÖLFLEX© H1Z2Z2-K 1X6 WH/BK loose as running meters
ÖLFLEX® SOLAR XLR-R cables are weather, abrasion and UV-resistant photovoltaic cables. These halogen-free, double-insulated and cross-linked solar cables are suitable for permanent outdoor use to connect grounded and ungrounded photovoltaic systems. They are used both for wiring solar modules to one another and for connecting the individual rows of modules and the inverter. The cable has been tested by TÜV Rheinland according to 2 PfG 1169/08.2007 (PV1-F) type.
Important product features:
Cable cross section: 6mm
Manufacturer: Lapp Kabel
Outer insulation color: black
Insulation color: white
XLR-R solar cables from Lapp can basically be laid in protective pipes suitable for burial in the ground if it is ensured that there is no permanent contact with water and waterlogging is safely drained away. The laying of the cables in the ground and the correct design of the cable trench must comply with VDE 0100 Part 520 or comparable standards in order to prevent damage to the protective tube and permanent exposure of the cables and lines to penetrating water. Long-term, permanent storage and permanent operation of the lines in or under water is not permitted.
Construction of conductors
1. Conductor: Fine-wire strand made of tinned copper wires, according to IEC 60228, class 5
2. Wire insulation: electron beam cross-linked polyolefin co-polymer
3. Outer jacket Electron beam crosslinked polyolefin co-polymer outer jacket color: black or black with red or blue stripes
Electrical properties
Rated voltage: U0 /U according to IEC AC 600/1000 V DC 900/1500 V
Max. Permissible system voltage: 1.8 kV DC (conductor/conductor, non-earthed system) according to TÜV 2 PfG 1169/08.2007 Test voltage AC 6.5 kV
Thermal properties
Temperature range fixed: -40° C to +120° C max. conductor temperature (according to EN 60216- 2)
Temperature range according to: -40 °C to +90 °C ambient temperature TÜV 2 PfG 1169/08.2007
Flexible laying temperature: max. -25 °C
Heat pressure resistance according to EN 60811-3-1
Damp-heat test according to EN 60068-2-78 at 85% humidity
Mechanical properties
Minimum bending radius occasionally moved: 15 x cable diameter
fixed: 5 x cable diameter
Dynamic penetration according to DKE requirement profile PV1-F AK 411.2.3 Appendix F
Tear propagation resistance according to DKE requirement profile PV1-F AK 4112.3 Appendix G
Tear strength and elongation test according to EN 60811
Chemical properties
Weather / UV resistance according to HD 605/A1
Ozone resistance according to EN 50396
Halogen-free according to EN 50267
Fire behavior flame-retardant according to IEC 60332-1-2
Acid and alkali resistance according to EN 60811-2-1 (oxalic acid and caustic soda)
Price refers to 1 running meter.
Delivery time: 1-3 working days
.
000-000-002
Solar Plug Branch Sockets Y-Connector (Pair)
Diese Abzweigbuchsen benötigen Sie, um mehrere Solarmodule miteinander zu verbinden. Durch die parallele Schaltung der Solarpanels erreichen Sie gleich bleibende Spannung. Ideal für 12V Systeme oder die Verkablung von Dünnschichtmodulen.Eigenschaften
1 Paar Y-Stecker zum parallelen Verschalten von 2 Solarmodulen
Easy-Klick System / Snap-In-Verriegelung - Schutzklasse IP67 im verriegelten Zustand
für Kabel mit einem Querschnitt von 4mm²-6mm²
Für Spannungen bis max. 1000V DC geeignet
Für die Verwendung im Freien geeignet (gesteckt IP67)
Kompatibel mit handelsüblichen Solar Steckverbindern
8-01-010705
H07RN-F 2x6mm² solar cable rubber line 2-cad
Info: This article is for sale here as a meter goods. For example, 4 items would make a 4m length cable.
The management is constructed for worldwide use and a wide variety of climate areas. For electricity generation with wind. Whether used for the connection of the individual solar cells with each other or for the cabling with the inverter. The cable is also ideal for laying in motorhomes and boats, as it is very flexible despite its two veins and can be placed over any corner.
Other special features of this line are that they achieve excellent values regarding the weather and UV resistance. The extended temperature range enables the use even in the most extreme climatic environment, counteracts thermal aging and thus guarantees the function of the PV system for many years in every season. And the networked insulation material prevents the insulation from flowing away in the event of a short -circuit case. Advantages of this line:
resistant to ozone and weather influences
Burning behavior according to VDE 0482-332-1-2, DIN EN 60332-1-2/IEC 60332-1 (corresponds to DIN VDE 0472 part 804 test type B)
Ozone resistance of the insulating covers according to DIN VDE 0472 Part 805, Testart A or Part 805 A1, testart C
Oil resistance, test according to EN 60811-2-1
Building data:
Cu-Litze Blank, fine-wound according to DIN VDE 0295 Kl. 5, BS 6360 Cl. 5, IEC 60228 or HD 383
Rubber-arteric insulation E4 according to DIN VDE 0282 Part 1
Insulating wall thickness according to DIN VDE 0282 Part 4
Certer marking according to DIN VDE 0293-308 or HD 186
Widers blue, brown
Rubber outer coat EM 2 according to DIN VDE 0282 Part 1
Mantel wall thickness according to DIN VDE 0282 Part 4
8-01-006300
Lapp oil flex © Solar XLR-R 1x4 Wh/BK
Oilflex® Solar XLR-R lines are weather, abrasion and UV-resistant photovoltaic lines. These halogen -free, double isolated and networked solar lines are suitable for constant use outdoors for the connection of grounded and undeveloped photovoltaic systems. They are used to wire solar modules with each other, as well as to connect the individual module series and the inverter. The management has been checked by TÜV Rheinland according to 2 PfG 1169/08.2007 (PV1-F) type.
Important product properties:
Line cross -section: 1x4mmManufacturer: Lapp cable Color outdoor insulation: blackColor interior insulation: white
XLR-R solar lines from LAPP can generally be laid in the ground in the ground in the ground laying, if it is ensured that there is no permanent contact with water and waterlogging is removed safely. The laying of the lines in the ground and the correct execution of the cable ditch must correspond to VDE 0100 part 520 or comparable standards in order to prevent damage to the protective tube and the permanent suspension of the cable and lines with penetrating water. Long -term, permanent storage and permanent operation of the lines in or under water is not permitted.
Leadership
1. Head: Fine-wound strands made of tinned Cu wires, according to IEC 60228, class 52. Ader insulation: Electron beam network polyolefin co-polymer3. Outside mantle Electron beam network polyolefin co-polymervour mantle: black or black with red or blue stripes
Electrical Properties
Nominal voltage: U0/U according to IEC AC 600/1000 V DC 900/1500 VMax. Permissible system voltage: 1.8 KV DC (head/conductor, non -grounded system) in accordance with TÜV 2 PfG 1169/08.2007 Pru? F voltage AC 6.5 kV
Thermal properties
Temperature range determined: -40 ° C to +120 ° C max. Max. Ladder temperature (in accordance with EN 60216-2)Temperature range stipulated: -40 ° C to +90 ° C ambient temperature TÜV 2 Pfg 1169/08.2007Flexible laying temperature: max. -25 ° CHeat pressure resistance in accordance with EN 60811-3-1Moisten-heating pru? Fung in accordance with EN 60068-2-78 with 85% humidity
Mechanical properties
Minimum bending radius occasionally moved: 15 x cable diameterSet: 5 x cable diameterDynamic penetration according to the DKE requirement profile PV1-F AK 411.2.3 Appendix FFurther tearing resistance according to the DKE requirement profile PV1-F AK 411.2.3 Appendix GPru?
Chemical properties
Weather / UV resistance according to HD 605 / A1Ozone resistance in accordance with EN 50396Halogen freedom in accordance with EN 50267Fire behavior flamed according to IEC 60332-1-2Acid and lye resistance in accordance with EN 60811-2-1 (oxalic acid and sodium hydroxide solution)
Delivery time: 5-6 working days
data sheet
Generally
item number
8-01-006300
Manufacturer
Lapp cable
EAN
4044777179121
902-1018
Anderson plug SB 50 gray 4-6mm² incl. contact pins
Anderson plug / battery connector set 50A
Easy on and off
Dimensions: L 47.6mm W 36.5mm H 15.9mm
Rated voltage up to 600V
Current max. 50A
Plug and socket (genderless)
Simple plug-in system for plugging and unplugging
Max. cable cross-section 4 - 6 mm²
Scope of delivery:
2 x housing
4 x crimp contacts
Delivery time: 1-3 working days
013375
Flush mounting frame for Anderson connectors incl. dust protection cover
The flush mounting frame from Offgridtec (MPN 013375) is suitable for SB50 Anderson connectors and is supplied with a cover. For inconspicuous installation, for example in a mobile home, on a boat or in a garden shed.
Characteristics
Mates with SB50 Anderson connectors (not included)
Includes cover for dust protection
Protection class: IP65
Material: Plastic
Color: Black
Scope of delivery:
1x Offgridtec flush mounting frame for Anderson connectors (Anderson connectors not included)
Delivery time: 1-3 working days
0005-10001
Solar Connection KIT 1 - 10m Solar cable + MC4 connector
With this solar connection kit you get a 10m bund 4mm² solar cable and 1 pair of MC4 plugs from Multi-Contact.This set is the solid basis for a secure connection between the solar module and charge controller or other energy consumers.Content solar connection kit 1 of offgridtec with the content:
10m BUND solar cable 4mm²
1 pair of MC4 plugs for 4-6mm² cable
8-01-006020
Offgridtec 5m 4mm² professional connection cable solar module to solar charge controller
This 2-wire solar cable professionally connects the solar charge controller to the solar modules in a solar system. On the module side, the cable has original Multi-Contact MC4 connectors and on the charge controller side, the cable ends are cut for easy removal of the sheath and exposure of the bare wire. The cable can be connected to any charge controller with the appropriate mount (min. 4mm²). Most 12V modules have MC-4 connectors. If your module has other plugs, you will find the right adapter in our shop.
Due to the cross-section, cables with 4mm² from a length of 5m are only suitable for 24V systems and upwards. For 12V you should use at least 6mm².
Length: 5m
All components were crimped with specialist tools and have an optimal connection quality. The processed solar cable comes from the manufacturer Lapp-Kabel and is a top brand product.
Features solar cable - 4mm cable cross-section - double insulated - very flexible - VDE 0295 class 5 and IEC 6022 - resistant to: UV, ozone, weather, water - Very resistant to chemicals and oil - Fire-resistant according to VDE 0482-332-2, DIN
Features MC-4 male & female - Touch protection, unplugged IP2X - Degree of protection, IP67 when plugged in - Operating temperature range -40° ...90° C - Insulation material PA - Snap-in locking system - Cable strain relief according to IEC 61984 - Contact system MC contact lamellae - Contact material copper, tinned - Flame class UL94-V0 - Protection class II - System voltage up to 1000V Weight 1.4kg Test voltage 2500 V Conductor structure DIN 0282 PART 4 HD 22.4 S3 according to IEC 60245-4 Manufacturer Offgridtec Permanent tensile load 15 N/mm² Copper content 77 kg / km Outside diameter 11.8 - 15.1 mm Temperature range -30°C to +60°C Material copper, tinned Product type 1 connection cable Cable cross-section 4mm² Cable length 5m Features double insulated
016005
Offgridtec Solar Cable 2x4mm² PV1-F 4mm² Two-core Solar Cable Black
Das Offgridtec Solarkabel 2x4mm² ist eine strahlenvernetzte High-End Solarleitung. Mit optimierten Leitungsdesign ist das Solarkabel schlank, leicht und robust und spart jede Menge Zeit bei der Installation.
Die Zwillingsleitung kann bei Bedarf leicht in zwei Leitungen getrennt werden. Dafür benötigen Sie keinerlei besonderes Werkzeug. Trotzdem ist die Verbindung der beiden Adern extrem stabil wenn Sie die Leitung lieber zusammen lassen möchten.
Bei diesem Artikel handelt es sich um Meterware. Jeder Artikel entspricht einem Meter. Wenn Sie z.B. 10x diesen Artikel kaufen, erhalten Sie ein zusammenhängendes Stück mit 10m Länge.
Nutzen
Einfach in zwei Einzelleitungen trennbar
Robust gegen mechanische Einwirkung
Reduktion der Brandausweitung sowie der toxischen Rauchgasbildung im Brandfall
Aufbau
Feindrähtiger, verzinnter Kupferleiter
Aderisolation aus strahlenvernetztem Copolymer
Außenmantel aus strahlenvernetztem Copolymer
Außenmantelfarbe: Schwarz (Adern parallel mit Trennsteg verbunden)
Lieferumfang:
1x 1m Solarkabel 2x4mm² (Meterware)
8-01-014980
Offgridtec installation frame Anderson connector - cigarette lighter DS1011
The installation frame from offgridtec is also suitable for SB50 Anderson connector (Anderson connector does not include the scope of delivery) and cigarette lighter. You can install this installation frame inconspicuously for your home, boat or motorhome.
Characteristics:
Protection class: IP65Material: PlasticColor: BlackTension: 12-24VScope of delivery:
1x installation frame for SB50 Anderson connector and cigarette lighter1x screws for fastening (4x)2x contact pins
8-01-014990
Offgridtec installation frame Anderson plug - USB socket - cigarette lighter
The installation frame from offgridtec is also suitable for SB50 Anderson connector (Anderson connector does not include the scope of delivery) and cigarette lighter. You can install this installation frame inconspicuously for your home, boat or motorhome.
Characteristics:
Protection class: IP65Material: PlasticColor: BlackTension: 12-24VScope of delivery:
1x installation frame for SB50 Anderson connector and cigarette lighter1x screws for fastening (4x)2x contact pins