Available (more than 10)
SCC110020160RVictron SmartSolar MPPT 100/20 Bluetooth integrated (up to 48 V)
The Smartsolar 100/20-48 from Victron Energy (MPN SCC110020160R) is a MPPT solar charge controller with 20A max. charging current for charging 12V and 24V batteries. Unlike the Bluesolar version, the Smart version has built-in Bluetooth, eliminating the need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control GX or the MPPT Control. The integrated Bluetooth in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices . An overview of the most important technical properties 20A max. charging current, suitable for 12V and 24V batteries nominal PV power for 12V systems: 290W nominal PV power for 24V systems: 580W nominal PV power for 48V systems: 1160W 20A load output high peak efficiency of 98% freely programmable battery charging algorithm (via the free Victron Connect APP) Light dimming functions programmable (via the free Victron Connect APP) Ultra-fast Maximum Power Point Tracking max. PV open circuit voltage: 100V Charging algorithm: multi-stage, adaptive built-in bluetooth module Ultra-fast maximum power point tracking Especially when the sky is overcast, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy harvest compared to PWM charge controllers by up to 30% and up to 10% compared to slower MPPT controllers. intelligent load output A deep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a specified voltage level. Alternatively, an algorithm for intelligent battery management can also be selected: see BatteryLife. The load output is short-circuit proof. Battery Life: intelligent battery management If the solar charge controller is not able to charge the battery to its full capacity within one day, the battery status alternates between " partially charged" and "end of discharge" back and forth. This mode of operation (no regular full charge) will damage a lead-acid battery within a few weeks or months. The Battery-Life algorithm monitors the state of charge of the battery and, if necessary, day by day it increases the threshold for disconnecting the load (i.e. the load becomes earlier disconnected) until the energy generated is sufficient to charge the battery to almost 100%.From this point, the threshold for switching off the load is modulated so that the charge is almost 100% reached about once a week Scope of delivery: 1x Victron Energy Smartsolar MPPT 100/20-48 20A 12V 24V 48V solar charge controller 1x operating instructions Note The device shows the imprint 48V - the data sheet of the 48V version is printed on the side of the device packaging. Contrary to this confusing information on the device itself, as described, it is suitable for both 12V and 24V - and now also for 48V battery banks. Until recently, these were separate devices - one for 12V/24V and one for 48V - these two have now been combined and the printing on the housing and packaging has been taken over from the 48V version .
Available (more than 10)
SCC110030210Victron SmartSolar MPPT 100/30 Bluetooth integrated
The Victron Energy SmartSolar MPPT 100/30 30A 12V/24V solar charge controller (MPN SCC110030210), is a new version of the BlueSolar 100/30. The only difference between the Smart version and the Blue version is the permanently integrated Bluetooth communication module. This allows the SmartSolar charge controller to be fully monitored and analyzed on any app-enabled device. The required Victron Connect app can be installed free of charge. key product features of the SmartSolar 100/30 30A 12V 24V MPPT ultra-fast MPP tracker of the latest generation ensures the best possible yield even when the sky is overcast onboard VE.Direct data communication port high maximum efficiency of 98% for 12V and 24V systems integrated Bluetooth module 30A maximum charging current fully programmable charging algorithms that can later be activated and used manually via a switch on the housing 100V maximum open circuit PV voltage 440W maximum PV power at 12V, 880W at 24V systems integrated protection against battery polarity reversal multi-level and adaptive loading algorithm Day/night timer and light dimming option more protection compared to the smaller models of the SmartSolar MPPT series?? Compared to the 75/10, 75/15 and 100/15 model, the SmartSolar 100/30 MPPT has overheating protection with a switch-off function and automatic switch-on again after a normal operating temperature has been reached. VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are coupled to the charge controller and thus offers the possibility of communication with additional GX devices Victron Color Control Panel. The VE.Direct connector is intended for products where full Canbus integration (VE-Direct) would cost too much. High-speed MPP tracker of the latest generation Especially when the sky is overcast, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy harvest compared to PWM charge controllers by up to 30% and up to 10% compared to slower MPPT controllers. In addition, the 100/30 has some other innovative technologies such as the VE.Direct communication port. Options for programming, real-time data and history display? Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected, for example, via the integrated Bluetooth Smart dongles and the MPPT app or the GX Color Control . Please note that Bluetooth Smart dongles and GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as an option. Flexible loading algorithms Fully programmable charging algorithm (also see the software page on our website) as well as eight pre-programmed algorithms that can be selected via a rotary knob (see in our manual) Scope of delivery: 1x Victron Energy SCC110030210 SmartSolar MPPT 100/30 30A 12V/24V solar charge controller 1x operating instructions Technical information .
Available (more than 10)
SCC020030200Victron Bluesolar Mppt 100/30 12V 24V 30A without Bluetooth
The Victron MPPT 100/30 (MPN SCC020030200) belongs to the large family of the Bluesolar Mppt loader and, like its big siblings, it already offers ultra-fast power tracking and can thus increase the yield of your solar system. In addition to the larger loading and PV performance, this Blue differentiates even more from the lower models. Because the 100/30 controller has the ability to fully program and save different charging algorithms. The self-created algos can then be selected directly via a Switch wheels on the housing. The load exit directly on the controller is no longer available from this model More protection compared to the smaller models of the Blursolar Mppt series Compared to the 75/10, 75/15 and 100/15 model, the Bluesolar 100/30 Mppt has overheating protection with a switch-off function and automatic rechargeable circuit after reaching a normal operating temperature. High-speed MPP tracker of the latest generation? Especially when the sky is covered, when the lighting intensity is constantly changing, an extremely fast MPPT controller improves the energy yield compared to PWM charging regulators by up to 30 % and compared to slower MPPT regulators by up to 10 %. In addition, the 100/30 has some other innovative technologies such as VE.Direct Communication. Options for programming, data in real time and display of the course Modern Apple and Android Smartphones, Tablets, MacBooks and other devices can be connected to the Bluetooth Smart Dongles and the MPPT or the GX Color Control via VE VE.Direct, for example. Please note the Bluetooth Smart Dongles and GX Color Control Own articles that are not included in the scope of delivery of the charge controller but can be acquired optionally from us. Essential product features of the Bluesolar 100/30 30A 12V 24V mppt? Ultra-fast MPP tracker of the latest generation ensures the best possible yield even with a covered sky Integrated VE.direct data communication sport for connection with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel high maximum efficiency of 98% Fully programmable loading algorithms that can later be activated and used manually via a switch on the housing Nominal charging current 30A, 100V maximum PV empty voltage 440W maximum PV power at 12V, 880W at 24V systems Integrated protection against battery reolving Multi-level and adaptive loading algorithm Day/night-time control and lighting option Ve.direct data communication sport Ve.direct In text mode, all important parameters are conveyed to other devices every second and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products in which complete canbus integration (VE-Direct) would cause too high costs. You can find more information about Ve.direct in our Victron brand world. scope of delivery 1x Victron SCC020030200 Bluesolar Mppt 100/30 12V 24V 30A charge controller operation manualdata sheet Loading type Mppt Product Loader IP protection) IP43 (electronic components) IP22 (connection area) Number of charging outputs 1 Battery type adjustable Gel, AGM, liquid lyric acid, Lifepo4, OPZS batteries Solar module voltage (max.) 100V Solar module current (max.) 30a Connection options MPPT Control, Color Control, Bluetooth Smart, Ve.direct-USB cable Protective functions Before battery and module rotation, starting coco, overtemp. Self -consumption in standby 10mA humidity Max. 95 % RF (not condensing) Max. Charging current 30a Manufacturer Victron Energy Weight 1.3 kg Ambient temperature -30 ° C - +60 ° C