Home Storage Accessories
-
News
- Complete Systems
- Batteries
- Electronics
- Installation
- Expansion
- Solar Technology
- Marken
Filter
–

Not in stock
150208100010
Pytes front bracket / Brackets for E-Box 4850
The Pytes Brackets serve to vertically stack the Pytes battery modules 48100r. With these stackable bracket brackets, you can stack the batteries vertically and thus ensure the best possible air circulation for the batteries. The batteries should not be stacked directly on top of each other without a distance. Brackets stacked on top of each other can be connected and secured via a clamping device on the sides of the brackets. A maximum of 4 batteries can be stacked on top of each other. A set consisting of two holders is required per battery.
Characteristics
Best possible air circulation
Connect and secure stacked brackets via the clamping device
Up to four batteries stackable
Set made of two brackets for a battery
Scope of delivery:
2x pytes brackets for e-box 48100R
€37.00*
€37.98*


Available (more than 10)
HVC 60050-A1
Growatt APX 98034-P2 power module BMS
The newGrowatt APX 98034-P2 Battery management system is a control unit of the latest generation that protects each APX battery module from adverse conditions and ensures safe and disruptive continuous operation. It does not matter how many modules are in operation at the same time. It is important that one BMS per tower is always used. A tower consists of at least 1 to a maximum of 6 Growatt APX 5.0P-B1 5KWH high-voltage battery modules, which can result in a storage capacity of 5-30 kWh.
Monitoring parameterSocSystem voltageSystem currentCell tensionCell temperaturePCBA temperatureThe APX battery system:Thanks to the modular concept, the APX system can be used flexibly and can be expanded if necessary. A battery tower can be built with at least one to a maximum of 6 memory modules. A performance module is required for operation per tower. This is separate for purchase. An additional base is required for soil mounting.
Technical specifications:Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Electricity: 30ATop current: 34a, 60sCommunication: RS485/CanScope of delivery:1x Growatt APX 98034-P2 BMS
€939.00*
€950.81*


Available (more than 10)
ARK-2.5H-A1
Growatt ARK 2.5H-A1 High-voltage Battery LiFePO4 2.56kWh
TheGrowatt ARK-2.5-A1 battery base is suitable for the installation of Growatt ARK batteries. This takes a safe stand of the battery tower. It is needed if the system cannot be installed on the wall.
ARK battery systemThe Growatt ARK battery system is modular. Additional batteries can be stacked on top of each other. The ARK-2.5L-A1 has a capacity of 2.56 kWh and a maximum (discharge) current of 25a. The nominal voltage is 51.2 V and the operating voltage is between 47.2 V and 56.8 V. The lithium iron phosphate battery (LFP) is free of cobalt, which leads, for example, to a more cost -effective battery. The battery has a lifespan of over 6000 cycles.Dimensions: 80x350x260 mmWeight: 28 kgScope of delivery:1x Growatt ARK-2.5-A1 base
€1,129.31*


APX 98034-P2
Growatt APX 98034-P2 power module BMS
The newGrowatt APX 98034-P2 Battery management system is a control unit of the latest generation that protects each APX battery module from adverse conditions and ensures safe and disruptive continuous operation. It does not matter how many modules are in operation at the same time. It is important that one BMS per tower is always used. A tower consists of at least 1 to a maximum of 6 Growatt APX 5.0P-B1 5KWH high-voltage battery modules, which can result in a storage capacity of 5-30 kWh.
Monitoring parameterSocSystem voltageSystem currentCell tensionCell temperaturePCBA temperatureThe APX battery system:Thanks to the modular concept, the APX system can be used flexibly and can be expanded if necessary. A battery tower can be built with at least one to a maximum of 6 memory modules. A performance module is required for operation per tower. This is separate for purchase. An additional base is required for soil mounting.
Technical specifications:Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Electricity: 30ATop current: 34a, 60sCommunication: RS485/CanScope of delivery:1x Growatt APX 98034-P2 BMS
€1,181.00*
€1,189.88*


Available (more than 10)
APX 5.0P-B1
Growatt APX Batteriebasis Hochvoltabt battery
TheGrowatt Apx Battery Base is suitable for the floor installation of Growatt APX battery modules and the associated BMS. It ensures a safe stand of the battery tower. The Growatt APX system is modular, i.e. several batteries can be combined, whereby the Growatt Base serves as the basis. Up to 10 memory modules and the associated BMS can be stacked on a base.
APX battery baseFor the floor mounting of Growatt APX batteries and the associated BMSa base per battery towerDimensions: 690 x 185 x 50 mmThe Growatt APX battery system is modular. Additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5KWH and the BMS a maximum (discharge) current of 13A, or 26A. From this it follows that a capacity of 5-30 kWh can be reached and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which leads, for example, to a cheaper battery.
Scope of delivery:1x growatt apx battery basis
€93.55*
€95.08*


Available (more than 10)
BDC 95045-A1
Growatt APX 98034-P2 power module BMS
The newGrowatt APX 98034-P2 Battery management system is a control unit of the latest generation that protects each APX battery module from adverse conditions and ensures safe and disruptive continuous operation. It does not matter how many modules are in operation at the same time. It is important that one BMS per tower is always used. A tower consists of at least 1 to a maximum of 6 Growatt APX 5.0P-B1 5KWH high-voltage battery modules, which can result in a storage capacity of 5-30 kWh.
Monitoring parameterSocSystem voltageSystem currentCell tensionCell temperaturePCBA temperatureThe APX battery system:Thanks to the modular concept, the APX system can be used flexibly and can be expanded if necessary. A battery tower can be built with at least one to a maximum of 6 memory modules. A performance module is required for operation per tower. This is separate for purchase. An additional base is required for soil mounting.
Technical specifications:Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Electricity: 30ATop current: 34a, 60sCommunication: RS485/CanScope of delivery:1x Growatt APX 98034-P2 BMS
€988.00*
€998.41*


Not in stock
ARK 2.5L-A1
Growatt ARK-2.5H-A1 Socket
TheGrowatt ARK-2.5-A1 battery base is suitable for the installation of Growatt ARK batteries. This takes a safe stand of the battery tower. It is needed if the system cannot be installed on the wall.
ARK battery systemThe Growatt ARK battery system is modular. Additional batteries can be stacked on top of each other. The ARK-2.5L-A1 has a capacity of 2.56 kWh and a maximum (discharge) current of 25a. The nominal voltage is 51.2 V and the operating voltage is between 47.2 V and 56.8 V. The lithium iron phosphate battery (LFP) is free of cobalt, which leads, for example, to a more cost -effective battery. The battery has a lifespan of over 6000 cycles.Dimensions: 80x350x260 mmWeight: 28 kgScope of delivery:1x Growatt ARK-2.5-A1 base
€56.60*
€58.31*


Not in stock
APX 98020-P1
Growatt APX 98020-P1 power module BMS
The newGrowatt APX 98020-P1 battery management system is a control unit of the latest generation that protects each APX battery module from adverse conditions and ensures safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. It is important that one BMS per tower is always used. A tower consists of at least 1 to a maximum of 6 Growatt APX 5.0P-B1 5KWH high-voltage battery modules, which can result in a storage capacity of 5-30 kWh.
Monitoring parameters:SOC, system voltage, system current, cell voltage, cell temperature, PCBA temperatureAPX battery systemThanks to the modular concept, the APX system can be used flexibly and can be expanded if necessary. A battery tower can be built with at least one to a maximum of 6 memory modules. A performance module is required for operation per tower. This is separate for purchase. An additional base is required for soil mounting.
Technical specifications:Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Electricity: 21aTop current: 27a, 60sCommunication: RS485/CanScope of delivery:1x Growatt APX 98020-P1 BMS
€1,111.38*
€1,130.38*

Not in stock
150208100011
Pytes rear bracket / Brackets for E-Box 4850
The Pytes Brackets serve to vertically stack the Pytes battery modules 48100r. With these stackable bracket brackets, you can stack the batteries vertically and thus ensure the best possible air circulation for the batteries. The batteries should not be stacked directly on top of each other without a distance. Brackets stacked on top of each other can be connected and secured via a clamping device on the sides of the brackets. A maximum of 4 batteries can be stacked on top of each other. A set consisting of two holders is required per battery.
Characteristics
Best possible air circulation
Connect and secure stacked brackets via the clamping device
Up to four batteries stackable
Set made of two brackets for a battery
Scope of delivery:
2x pytes brackets for e-box 48100R
€37.00*
€37.98*