Solar Panel Accessories
- News
- Complete Systems
- Batteries
- Electronics
- Installation
- Expansion
- Solar Technology
- Marken
Filter
–


Available (more than 10)
2H-FURD-397Z
MC4 connector pair - socket + plug 4-6mm² type 4 PV-KBT4/6I
This economy set consists of a male and a female MC4 connector with the respective inner workings. These are original MC4 connectors from Stäubli
Technical data
Touch protection, unplugged IP2X
degree of protection, plugged in IP67
Temperature range -40° ...90° C
Insulation material PA
Snap-in locking system
Cable strain relief according to IEC 61984 (06.2001)
Contact system MC contact lamellas
Contact material copper, tinned
flame class UL94-V0
Protection class II
system voltage up to 1000V
Rated current up to 30A


Available (more than 10)
8-01-006295
Lapp ÖLFLEX© H1Z2Z2-K 1X6 WH/BK loose as running meters
ÖLFLEX® SOLAR XLR-R cables are weather, abrasion and UV-resistant photovoltaic cables. These halogen-free, double-insulated and cross-linked solar cables are suitable for permanent outdoor use to connect grounded and ungrounded photovoltaic systems. They are used both for wiring solar modules to one another and for connecting the individual rows of modules and the inverter. The cable has been tested by TÜV Rheinland according to 2 PfG 1169/08.2007 (PV1-F) type.
Important product features:
Cable cross section: 6mm
Manufacturer: Lapp Kabel
Outer insulation color: black
Insulation color: white
XLR-R solar cables from Lapp can basically be laid in protective pipes suitable for burial in the ground if it is ensured that there is no permanent contact with water and waterlogging is safely drained away. The laying of the cables in the ground and the correct design of the cable trench must comply with VDE 0100 Part 520 or comparable standards in order to prevent damage to the protective tube and permanent exposure of the cables and lines to penetrating water. Long-term, permanent storage and permanent operation of the lines in or under water is not permitted.
Construction of conductors
1. Conductor: Fine-wire strand made of tinned copper wires, according to IEC 60228, class 5
2. Wire insulation: electron beam cross-linked polyolefin co-polymer
3. Outer jacket Electron beam crosslinked polyolefin co-polymer outer jacket color: black or black with red or blue stripes
Electrical properties
Rated voltage: U0 /U according to IEC AC 600/1000 V DC 900/1500 V
Max. Permissible system voltage: 1.8 kV DC (conductor/conductor, non-earthed system) according to TÜV 2 PfG 1169/08.2007 Test voltage AC 6.5 kV
Thermal properties
Temperature range fixed: -40° C to +120° C max. conductor temperature (according to EN 60216- 2)
Temperature range according to: -40 °C to +90 °C ambient temperature TÜV 2 PfG 1169/08.2007
Flexible laying temperature: max. -25 °C
Heat pressure resistance according to EN 60811-3-1
Damp-heat test according to EN 60068-2-78 at 85% humidity
Mechanical properties
Minimum bending radius occasionally moved: 15 x cable diameter
fixed: 5 x cable diameter
Dynamic penetration according to DKE requirement profile PV1-F AK 411.2.3 Appendix F
Tear propagation resistance according to DKE requirement profile PV1-F AK 4112.3 Appendix G
Tear strength and elongation test according to EN 60811
Chemical properties
Weather / UV resistance according to HD 605/A1
Ozone resistance according to EN 50396
Halogen-free according to EN 50267
Fire behavior flame-retardant according to IEC 60332-1-2
Acid and alkali resistance according to EN 60811-2-1 (oxalic acid and caustic soda)
Price refers to 1 running meter.
Delivery time: 1-3 working days
.

Available (more than 10)
8-01-001295
Nutenstein aluminum/A2 for solar rail profile (4x4cm) M8 screw thread
Nut-Stein with M8 screw thread. Can be conveniently pressed into the 4x4cm solar profile rail from above. The well thought-out feather-ball mechanics simplifies the assembly and ensures a good hold.
Characteristics
M8 screw thread
Feder-ball mechanics
Material: aluminum

Available (more than 10)
8-01-001690
Biber tail roof hook
Beaver tail roof hooks are specially designed for use on roofs with beaver tail covering and 8 x 100 mm are attached directly on the rafters with two plates.Since the long -exposing bracket of the beaver tail roof hooks on the brick below, we recommend replacing the clay brick with a tin brick.
Characteristics
Material: stainless steel A2

Available (more than 10)
000-000-002
Solar Plug Branch Sockets Y-Connector (Pair)
Diese Abzweigbuchsen benötigen Sie, um mehrere Solarmodule miteinander zu verbinden. Durch die parallele Schaltung der Solarpanels erreichen Sie gleich bleibende Spannung. Ideal für 12V Systeme oder die Verkabelung von Dünnschichtmodulen.Eigenschaften
1 Paar Y-Stecker zum parallelen Verschalten von 2 Solarmodulen
Easy-Klick System / Snap-In-Verriegelung - Schutzklasse IP67 im verriegelten Zustand
für Kabel mit einem Querschnitt von 4mm²-6mm²
Für Spannungen bis max. 1000V DC geeignet
Für die Verwendung im Freien geeignet (gesteckt IP67)
Kompatibel mit handelsüblichen Solar Steckverbindern

Available (more than 10)
8-01-010705
H07RN-F 2x6mm² solar cable rubber line 2-cad
Info: This article is for sale here as a meter goods. For example, 4 items would make a 4m length cable.
The management is constructed for worldwide use and a wide variety of climate areas. For electricity generation with wind. Whether used for the connection of the individual solar cells with each other or for the cabling with the inverter. The cable is also ideal for laying in motorhomes and boats, as it is very flexible despite its two veins and can be placed over any corner.
Other special features of this line are that they achieve excellent values regarding the weather and UV resistance. The extended temperature range enables the use even in the most extreme climatic environment, counteracts thermal aging and thus guarantees the function of the PV system for many years in every season. And the networked insulation material prevents the insulation from flowing away in the event of a short -circuit case. Advantages of this line:
resistant to ozone and weather influences
Burning behavior according to VDE 0482-332-1-2, DIN EN 60332-1-2/IEC 60332-1 (corresponds to DIN VDE 0472 part 804 test type B)
Ozone resistance of the insulating covers according to DIN VDE 0472 Part 805, Testart A or Part 805 A1, testart C
Oil resistance, test according to EN 60811-2-1
Building data:
Cu-Litze Blank, fine-wound according to DIN VDE 0295 Kl. 5, BS 6360 Cl. 5, IEC 60228 or HD 383
Rubber-arteric insulation E4 according to DIN VDE 0282 Part 1
Insulating wall thickness according to DIN VDE 0282 Part 4
Certer marking according to DIN VDE 0293-308 or HD 186
Widers blue, brown
Rubber outer coat EM 2 according to DIN VDE 0282 Part 1
Mantel wall thickness according to DIN VDE 0282 Part 4