Inverter Accessories
REL200200100
Victron Energy Meter EM24 - 3 phase - Max 65a/phase Ethernet
The Energy Meter EM24 from Victron Energy (MPN Rel200200100) is a three-phase energy counter with a maximum of 65a per phase. It is used in the house connection/counter box to measure the services on all three phases.
The energy meter can be used as:
Grid knife and is used as a tax input for an ESS system
Measurement device for the performance of a PV inverter
Measurement device for the performance of an alternating current unit
For all uses mentioned above, the measuring device should be connected to the local network so that the GX device can achieve it.
Note on GX firmware versions
To support the Ethernet EM24 measuring devices, Venus 2.60 is the minimum firmware required on the GX device.
Scope of delivery:
1x Victron Energy Meter EM24 Rel200200100
Ambient temperature
-25 ° C - +55 ° C
EAN
8719076051268
Manufacturer part number
Rel200200100
Weight
0.44 kg
Dimensions (LXBXH)
120 x 100 x 70 mm
Manufacturer
Victron Energy
Display
permanently integrated LCD display
REL200300100
Victron 3-Phase Energy Meter Smart Meter VM-3P75CT
Dreiphasen-Energiezähler mit Ethernet- und VE.Can-KommunikationsanschlüssenDer Victron VM-3P75CT Energiezähler ist ein Standardgerät zur Messung der Leistung und Energie in Einzel- und Dreiphasenanwendungen, beispielsweise im Verteilerschrank oder zur Messung der Leistung eines PV-Wechselrichters, eines AC-Generators oder der Leistung eines Wechselrichters und Wechselrichter-/Ladegeräts.Hohe AktualisierungsrateDurch Berechnung der Effektivleistungswerte für jede Phase überträgt der Energiezähler diese mit hoher Geschwindigkeit über VE.Can oder Ethernet, was zu genauereren Messungen des Leistungsverbrauchs, des Netzbezugs und des Netzrücklaufs führt, beispielsweise in einem EES-System.Der VM-3P75CT ermöglicht eine einfache EinrichtungDer Energiezähler wurde für eine einfache Integration entwickelt und funktioniert sofort (Plug & Play) als Netz-Messgerät für die meisten Systeme. Die Konfiguration (über VictronConnect) ist nur erforderlich, um die Funktion zu ändern (Netz-Messgerät, PV-Wechselrichter, AC-Generator oder AC-Last-Messgerät) sowie die manuelle IP-Konfiguration anstelle der Standardeinstellung, DHCP.Fernüberwachung von überallDie Daten werden in der VictronConnect-App, einem GX-Gerät wie dem Cerbo GX oder Ekrano GX und unserem VRM-Portal angezeigt.Mühelose Installation mit SchnappschaltstromwandlernDer VM-3P75CT verwendet Zangenmesswandler um den Strom genau zu erfassen, ohne die Verdrahtung einer bestehenden Installation ändern zu müssen.Vektor ErfassungsmethodeDer VM-3P75CT verwendet das Vektormeldeverfahren (die Vektoren jeder Phase L1, L2 und L3 werden summiert).
CIP000100001
Victron high-load security holder with lid for mega-fuse / AMG fuses
The MEGA-FUSE fuse holder from Victron Energy (MPN CIP000100001) with a lid is used to secure DC MEGA-FUSE. The housing offers solid protection against outer influences.
Important article features at a glance:
500A max. Electricity at max. 32V DC
300A max. Electricity at 58V DC
For fuses of the Mega-Fuse type
Material: high-strength plastic mixture
Corresponds to IEC 60947-3: 1999 + A1: 2001 + A2: 2005 in connection with IEC 60947-1: 2004
Via the MEGA strip protection:
Fuels of the MEGA-FUSE fuse are the patrol fuses and are screwed to the holder to ensure optimal contact. Corresponding nuts and sprinkling rings are already pre -assembled on the holder.
With mega fuses, up to 500a can be secured at 32V DC. Up to 300a are possible for the 58V variants.
32V mega -fuse fuses - all sizes up to max. 500a
58V mega -fuse fuses - all sizes up to max. 300a
Scope of delivery:1x Victron CIP000100001 MEGA-FUSE Fuse holder
REL300300000
Victron electricity meter ET340 3-phase max 65a/phase
The Victron ET340 (MPN Rel300300000) is a 3-phase electricity meter that is designed for a maximum current of 65a per phase.
The ET340 electricity meter can be used for four different applications:
Electricity meter and tax input in an ESS (home storage system) in connection with the Color Control GX and a Victron inverter
Electricity measurement at the output of a PV inverter
Electricity measurement at the output of an AC unit
Wiring and connection of the ET340
There are two options in its wiring. On the one hand, the direct connection, via the RS485 to USB interface with 1.8m or 5m cable or alternatively the wireless connection via ZigBee.
Scope of delivery:
1x VICTRON Rel300300000 ET340 3-phase power meter 65a/phase
1x operating instructions
Weight
0.23 kg
Manufacturer
Victron Energy
guarantee
5 years of manufacturer's guarantee
8-01-013740
2-fold MEGA-Fuse Fuse holder with holder for spare fuse
The 2-compartment MEGA-Fuse fuse holder with cover is used for the safe installation of dc MEGA-Fuse strip fuses. The housing provides solid protection of the fuse from external influences. In addition, the fuse holder is equipped with a holder for spare fuses.
Article features at a glance:
500a max. current at max. 32v dc
300a max. current at max. 58v dc
for fuses type MEGA-Fuse
Material: high strength plastic compound
Dimensions: approx. 126 x 75 x 45 mm
Operating temperature range: -20°C - +150°C
Complies with iec 60497-3: 1999 + a1: 2001 + a2: 2005 in conjunction with iec 60947-1:2004
about the MEGA strip fuse:
MEGA-Fuse type fuses are among the strip fuses and are screwed to the holder to ensure optimum contact. Corresponding nuts and snap rings are already pre-mounted on the holder.
With MEGA fuses up to 500a can be fused at 32v dc. With the 58v variants up to 300a are possible.
Scope of delivery:
1xOffgridtec 2-bay MEGA-Fuse fuse holder (mpn anm-c2)
REL300100000
Victron electricity meter ET112 1-phase max. 100A
The Victron ET112 electricity meter 1-phase (MPN Rel300100000) for a maximum of 100A. The ET112 electricity meter can be used for four different applications:
Electricity meter and tax input in an ESS (home storage system) in connection with the Color Control GX and a Victron inverter
Electricity measurement at the output of a PV inverter
Electricity measurement at the output of an AC unit
Wiring and connection of the Ett112
There are two options in its wiring. On the one hand, the direct connection, via the RS485 to USB interface with 1.8m or 5m cable or alternatively the wireless connection via ZigBee.
Scope of delivery:
1x Victron Rel300100000 ET112 electricity meter 100a
1x operating instructions
CTR110000500
Victron Current Electricity Transformer 100a: 50mA for Multiplus-II 1M
TheCurrent Electricity transformer 100 A: 50 mA from Victron Energy is an extension to the Multiplus-II / Multigrid II series. With the transformer, the PowerControl and Power Assist function can be implemented and the self-consumption with external current measurement can be optimized.
Characteristics
For multiplus II and multigrid II series
Cable length: 1m
Max. Electricity: 32a
Easy installation with a connector connection
PowerControl - optimization of the power supply with limited alternating currentThe Multiplus-II / Multigrid-II can give a very high charging current. This means a heavy load for alternating current supply or the generator. For this reason, a maximum current can be set. The Multiplus-II then takes into account the already adjacent consumption and only uses the still free electricity for battery charge.
Power Assist-extended usage options of generator or land connection: the "support" functionWith this function, the PowerControl principle receives a new dimension because the Multiplus-II can support a too weak alternative source. Load tips often only occur for a limited period of time. In such a case, the Multiplus-II ensures that an excessive current network or generator output that is too weak is immediately compensated for by energy from the battery. If the load is reduced, i.e. consumers are switched off, the energy that is sufficiently existing can then be used again for charging the batteries.
Scope of delivery:1x Victron Energy current transformer for multiplus-II 1m
data sheet
Manufacturer
Victron Energy
Dimensions
50 x 75 x 65 mm
Weight
0.055 kg
Manufacturer part number
CTR110000500
EAN
8719076044529
2016
Votronic assembly frame s for display area inverter
For the external assembly of the control section of the Votronic inverter Mobilpower Inverter. Bred the Votronic module system both optically and mechanically (uniform height 85mm).
Availability: immediately available!
Delivery time: 1-3 working days
CTR110000550
Victron Current Electricity Transformer 100a: 50mA for Multiplus-II 5m
TheCurrent Electricity transformer 100 A: 50 mA from Victron Energy is an extension to the Multiplus-II / Multigrid II series. With the transformer, the PowerControl and Power Assist function can be implemented and the self-consumption with external current measurement can be optimized.
Characteristics
For multiplus II and multigrid II series
Cable length: 5m
Max. Electricity: 32a
Easy installation with a connector connection
PowerControl - optimization of the power supply with limited alternating currentThe Multiplus-II / Multigrid-II can give a very high charging current. This means a heavy load for alternating current supply or the generator. For this reason, a maximum current can be set. The Multiplus-II then takes into account the already adjacent consumption and only uses the still free electricity for battery charge.
Power Assist-extended usage options of generator or land connection: the "support" functionWith this function, the PowerControl principle receives a new dimension because the Multiplus-II can support a too weak alternative source. Load tips often only occur for a limited period of time. In such a case, the Multiplus-II ensures that an excessive current network or generator output that is too weak is immediately compensated for by energy from the battery. If the load is reduced, i.e. consumers are switched off, the energy that is sufficiently existing can then be used again for charging the batteries.
Scope of delivery:1x Victron Energy current transformer for multiplus-II 5mdata sheet
Manufacturer
Victron Energy
Dimensions
50 x 75 x 65 mm
Weight
0.085 kg
Manufacturer part number
CTR110000550
EAN
8719076044529
8-01-010710
Switching station for the US230/12 12A 2700W 230VAC network
Versatile multi -talent
Offgridtec switching stations enable you to operate 230V consumers from two different voltage sources. Typically, this is a voltage converter or the public power grid
With the priority circuit, you can determine which power source should be used preferentially - this voltage source is eliminated to the replacement current source.
The use of the highest quality relay guarantees on the one hand a particularly precise switching threshold, on the other hand, your voltage converter is optimally protected from feedback from external tension.
Recommendations
Solar island systems
Service and commercial vehicles
Mobile and caravans
Sailing boats and other watercraft
Technical specifications
Input voltage: 230VAC, 50/60Hz
Input current (max.): 12a
Output voltage: 230VAC, 50/60Hz
Performance (max.): 2700VA
Switching time: 1-2 seconds li>
Fuse: F 15A / 250V
Protection: overload, short circuit
Housing: plastic
Protection class: IP55
Inputs: screw terminals
Dimensions: (LXBXH): 120 x 120 x 58mm
Weight: 250g
Application example 1-network preliminary circuit
The 230 V AC network is connected to the input AC2 (higher priority)
This means that the battery is spared and the inverter is also protected from external tension.
Only when AC2 turns off that does the input AC1 switch to the power supply via battery and inverter
Application example 2-Inverter preliminary circuit
The inverter is connected to the input AC2 (higher priority)
This means that the electricity is primarily taken from the battery by the inverter (e.g. when using solar island systems)
The 230 V AC network is only switched on via the AC1 input
Scope of delivery:
1x switching station, grounding clamp, operating instructions, DE, GB, FR, NL, NL
SDFI0000000
VICTRON Filax 2 Transfer CE 230V/50Hz-240V/60Hz
The ultra -fast Filax transfer switch from Victron Energy (MPN SDFI0000000) was developed to switch important or sensitive consumers such as computers, industrial control units or modern entertainment electronics from one change of alternating current to another. The main source is typically the power grid, a generator or a land connection. An inverter usually serves as an alternative source. With its switch -off time of less than 20 milliseconds, even sensitive loads continue to work without interruption.The Filax is not designed to supply household appliances with high electricity consumption, such as washing machines or electric motors.Gun switching functionThe Filax is a transfer switch with a gun (non -bridge) switching function. The maximum time for switching the loads is 16 ms. The load is usually supplied with the main generator and is switched to the alternative source in the following cases:
The voltage of the main power source falls below the threshold value.
The frequency of the main power source falls below the low frequency threshold value or it exceeds the high frequency threshold value.
Switching back from the alternative power source to the main source of the main power as soon as the voltage and frequency values of the main source of the main power are located for 30 seconds within the limit values specified for switching back.Technical specifications
Max. Electricity: 16A
Max. Time for switching: 16 ms
Switching delay for switching back: 30 seconds
Operating temperature range: -20 ° C - +50 ° C
Moisture (not condensing): max. 95%
Protection class: IP65
Weight: 0.8 kg
Dimensions: 120 x 255 x 75 mm
installation
Install the Filax in a dry and well -ventilated environment.
The input cables from the generator / main power supply and the output cables to the devices must be connected according to the circuit diagram.
When connecting a load with less than 850 watts, the wire bridges must be removed.
The frequency (50 Hz or 60 Hz) is set using a bridge. If the bridging is not set for the frequency, the switch-in threshold values for the voltage are incorrect.
Both inputs must be protected from electricity values of over 16 amps.
The front cover of the housing is attached using the four screws supplied.
The Filax is now ready for use.
Scope of delivery:
1x Victron Energy Filax Transfer switch SDFI00000004x fastening screws1x operating instructions
TEXU400
Central electrics Texu400 - fuse holder, collective rails and more in one
Central electrics that replace the purchase of many individual components for the motorhome electronics and improve their application. For larger campers, residential and expedition mobile and electricity up to 400a. Village protected against combustible gases according to ISO 8846.
The Texu400 offers crucial advantages both in the self-made motorhome self-construction and the professional manufacturer:
saves over 50% installation space Compared to the use of conventional products,
Costs less money By unique merging functions in a single device and reducing the need for expensive raw materials (especially copper)
Less time and sources of error Due to the elevation of half of all cable crimples!
Texu400 central electrics for travel vehicle and boat
The Texu400 revolutionizes electrical installation. It combines different components that have been bought individually in a round overall housing, the use of space and the number of possible connections in the smallest space. The special arrangement, which is only available in the Texu400, enables system integration with groundbreaking low effort. This results in a drastic cost, time and space saving while reducing sources of error and maximum application comfort after installation.
Costs less
The Texu400 replaces the purchase of several expensive individual components. The unique, round arrangement in a single device also leads to a large saving of raw materials. Above all, the consumption of the strongly increased copper in the price could be reduced drastically. Functional mechanism and raw material savings lead to a significant cost saving compared to the purchase of conventional components to install a comparable system.
Saves space
The elimination of individual components and the patented design in a round shape not only saves money - it also requires much less installation space in travel vehicle or boat. Extensive, electrical systems can therefore be planned in a smaller room and the space obtained can be used for other purposes.
Saves working hours & sources of error
Instead of many individual components, only a single component is installed, which "incidentally" makes half of all cable crimples superfluous! It saves valuable working hours and other installation material. 50% less crimples also mean 50% less stress with compounds that (now or later) can cause problems. The complete installation is less prone to interference in one fell swoop.
Furthermore, stacking of cable shoes and inadequate mass distribution is finally a thing of the past. Compared to a angular structure with individual components, 46% of a valuable space in travel vehicles or boot is stored!
Texu400 components and functional overview
Shared minus collecting rail
Connection of up to 4 batteries.
11 high current and 4 standard consumers.
Plus rail for on-board batteries and consumers
Screw connections and fuses 2x mega / amg fuse max. 400a
9x midi / ami fuse max 170a
4x ATO / ATC / ATP fuse max. 30A
All connection bolts made of corrosion -resistant stainless steel. For high -current consumers, M8 bolts with flange mushrooms are intended to safely connect cable shoes of up to 70 mm².
1: 1 mass distribution
End with insufficient mass distributions! The Texu400 also includes a minus connection for every plus.
Easy integration of a sum current measurement
The Sunt Bridge between the minus collection rails installed ex works can easily be removed by screwing and replaced by a plastic bridge contained in the scope of delivery in order to enable the fast and uncomplicated integration of a measuring shunt.
Mega security with double input
New on the market: The Texu400 contains a mega safety area with a double screw connection. Where cable shoes have been stacked so far or other suboptimal constructions had to be conceived from case to a case (e.g. in the case of clamped cables of powerful inverters), there is now a professional solution: a mega safety area with max. 400A and double screw connection, ensures professional and safe installation of such Components.
Village protected according to ISO 8846
The UFO is with the integrated, all -round bridge with poetry according to ISO 8846. It is therefore also approved for assembly in the engine compartment.
LED failure control with light ladders
Immediate diagnosis. Light guide have the LED failure control illuminated directly at the label of the circuits in the closed lid. Remove fuses and search upside down in narrow points for mistakes you can save yourself! A prefabricated labeling with some individually designed content is included in the scope of delivery of the Texu400.
Space for replacement backups
The Texu400 contains additional slots for replacement backups (1x mega, 2x MIDI, 2x ATO/ATC/ATP)
Comfortable opening and closing
The knob, arranged in the middle of the housing cover, can easily open and close the cover and even make one -handed operation possible in cramped space.
Texu400 central electrics for travel vehicle and boat
The Texu400 revolutionizes electrical installation. It combines different components that have been bought individually in a round overall housing, the use of space and the number of possible connections in the smallest space. The special arrangement, which is only available in the Texu400, enables system integration with groundbreaking low effort. This results in a drastic cost, time and space saving while reducing sources of error and maximum application comfort after installation.
Costs less
The Texu400 replaces the purchase of several expensive individual components. The unique, round arrangement in a single device also leads to a large saving of raw materials. Above all, the consumption of the strongly increased copper in the price could be reduced drastically. Functional mechanism and raw material savings lead to a significant cost saving compared to the purchase of conventional components to install a comparable system.
Saves space
The elimination of individual components and the patented design in a round shape not only saves money - it also requires much less installation space in travel vehicle or boat. Extensive, electrical systems can therefore be planned in a smaller room and the space obtained can be used for other purposes.
Saves working hours & sources of error
Instead of many individual components, only a single component is installed, which "incidentally" makes half of all cable crimples superfluous! It saves valuable working hours and other installation material. 50% less crimples also mean 50% less stress with compounds that (now or later) can cause problems. The complete installation is less prone to interference in one fell swoop.
Furthermore, stacking of cable shoes and inadequate mass distribution is finally a thing of the past. Compared to a angular structure with individual components, 46% of a valuable space in travel vehicles or boot is stored!
Texu400 components and functional overview
Shared minus collecting rail
Connection of up to 4 batteries.
11 high current and 4 standard consumers.
Plus rail for on-board batteries and consumers
Screw connections and fuses 2x mega / amg fuse max. 400a
9x midi / ami fuse max 170a
4x ATO / ATC / ATP fuse max. 30A
All connection bolts made of corrosion -resistant stainless steel. For high -current consumers, M8 bolts with flange mushrooms are intended to safely connect cable shoes of up to 70 mm².
1: 1 mass distribution
End with insufficient mass distributions! The Texu400 also includes a minus connection for every plus.
Easy integration of a sum current measurement
The Sunt Bridge between the minus collection rails installed ex works can easily be removed by screwing and replaced by a plastic bridge contained in the scope of delivery in order to enable the fast and uncomplicated integration of a measuring shunt.
Mega security with double input
New on the market: The Texu400 contains a mega safety area with a double screw connection. Where cable shoes have been stacked so far or other suboptimal constructions had to be conceived from case to a case (e.g. in the case of clamped cables of powerful inverters), there is now a professional solution: a mega safety area with max. 400A and double screw connection, ensures professional and safe installation of such Components.
Village protected according to ISO 8846
The UFO is with the integrated, all -round bridge with poetry according to ISO 8846. It is therefore also approved for assembly in the engine compartment.
LED failure control with light ladders
Immediate diagnosis. Light guide have the LED failure control illuminated directly at the label of the circuits in the closed lid. Remove fuses and search upside down in narrow points for mistakes you can save yourself! A prefabricated labeling with some individually designed content is included in the scope of delivery of the Texu400.
Space for replacement backups
The Texu400 contains additional slots for replacement backups (1x mega, 2x MIDI, 2x ATO/ATC/ATP)
Comfortable opening and closing
The knob, arranged in the middle of the housing cover, can easily open and close the cover and even make one -handed operation possible in cramped space.
Please Note: Since individual electrical systems contain different components that have to be secured appropriately, no prefabricated security rate is included directly in the scope of delivery of the Texu400. Of course you will find fuses and other installation material in our shop.
COS230502100
Victron VE Transfer switch 5KVA, single phase 200-250V AC
VE transmission switch
The VE Transfer Switch automatically switches between different power sources: between the generator and the country current, between inverter and the generator or between inverter and the country power.The VE Transfer Switch has two inputs and one output, it automatically transfers the available alternating current output to the output.
The VE Transfer Switch is available in two models:
5 KVA, one -phase, 200–250 VAC
10 KVA, one -phase, 200–250 VAC
2269
Votronic connection cable for SMI-inverter red/black 35 mm², 1 m long
Cable sets for plus (red) and minus (black) battery connection of the SMI-inverter "ST", highly flexible high current cable, ready-made with a pipe cable shoe for bolt M8.
Length: 2x 1m with M8 ring cable shoe
Color: red/black
Cable cross -section: 35mm
Scope of delivery: 1x Votronic 2269 (cable set for SMI 1500/1500 NVS)
2251
Votronic high-load safety holder with lid
Delivery time on request
Fully isolated security holder for high-speed protection to secure large consumers or high-load circuits. The safety holder is equipped with M8 thread on both sides. You can find the right high -speed security here.
Delivery takes place without a high -speed protection. Dimensions: 122 x 42 x 39mm
COS230103100
Victron VE Transfer switch 10kva, single phase 200-250V AC
VE transmission switch
The VE Transfer Switch automatically switches between different power sources: between the generator and the country current, between the inverter and the generator or between the inverter and the country power.The VE Transfer Switch has two inputs and one output, it automatically transfers the available alternating current output to the output.
The VE Transfer Switch is available in two models:
5 KVA, one -phase, 200–250 VAC
10 KVA, one -phase, 200–250 VAC
2273
Votronic connection cable for SMI-inverter red/black 35 mm², 2 m long
Cable sets for plus (red) and minus (black) battery connection of the SMI-inverter "ST", highly flexible high current cable, ready-made with a pipe cable shoe for bolt M8.
Length: 2x 2m with M8 pipe cable shoe
Color: red/black
Cable cross -section: 35mm
Scope of delivery:
1x Votronic 2273 (cable set for SMI 1500/1500 NVS)
RCD000300200
Victron Anti-Islanding Box 63a, for one and three-phase operation
The anti-Islanding box is a completely pre-cabled and easy-to-install device, which ensures that your battery system can be continued in the event of a network failure.If theoretically energy could be fed back into the public network from a battery system in the event of a network failure, an anti-Icelanding device must be installed in the battery system that corresponds to the local provisions. If there is a power failure in the electricity plant, this so -called ENS separates the connection to the network and its system continues as an independent system.
The anti-Islanding Box 63a one and three-phase, is a combination of an anti-Icelanding device, the UFR1001E anti-Icelanding relay, two inline shifting devices and one main performance switch. It is suitable for both single -phase and three -phase systems. It has a nominal output of up to 63 A per phase and all parts are conveniently housed in a housing of the protection class IP65.
The anti-Islanding box can be integrated into a network-sponsored inverter/charging system (ESS) in order to meet the local anti-Icelanding regulations.
The anti-Islanding Box 63a for single-phase and three-phase systems fulfills the following standards:
- G83/2 and G59/3 (proof of conformity Great Britain)
-VDE-AR-N 4105 (proof of conformity na protection Germany)
-ÖVE / ÖNORM E 8001-4-712 (Austria's obstruction)
-DIN V VDE V 0126-1-1 / A1 / NOI-RES_13E (objection certificate of Europe)
-NRS-097-2-1 (proof of conformity in South Africa)
The German, Austrian and French norms require two electrical switchgear switched in a row.
The Ziehl relay controls both switching devices.Note: The second shooter is not required for G83 / 2 and G59 / 3-compliant systems.
2065
Votronic Control Unit for Mobilpower Inverter
Input/output unit for Votronic Sinus-Inverter SMI (-nvs) of all performance classes. The control takes place with+12V/+24V signal (one), e.g. from D+(inverter works automatically for light mast, air conditioning, cold and heat boxes, large consumers, etc.) or centrally from a general head switch (all devices including The network devices are switched on or off when entering or leaving the vehicle, etc.).Scope of delivery: Control Unit, connection cable 30 cm long, operation manual