Chargers
BPC122547006
Victron Blue Smart 12/25 IP67 charger 12/230 volts
The Blue Smart IP 67 12/25 12V 230V battery charger from Victron Energy (MPN BPC122513006) is a smart, high-performance battery charger of the latest generation with 25a charging current for charging 12V AGM, gel and lyricic acid batteries as well as lithium ion batteries. In terms of function, the Blue Smart IP67 series is identical to the chargers of the Blue Smart IP 65 and IP 22 device families. Only the application environment for which these chargers are designed differ.
Thanks to the integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and electricity, for adapting settings and updating the charger when new functions are available.
Important features of the Blue Smart IP67 12/25 25a battery charging devices
Victron part number: BPC122513006
Model description: Blue Smart IP 67 12/25
Max. Charging current: 25a
For battery voltage: 12V DC
For mains voltage: 180-265 VAC 45-65 Hz
Completely covered: waterproof, push -in and fire -retardant
Smart configuration and monitoring via integrated Bluetooth and free app
adaptive, 5-stage loading algorithm
extends the life of your batteries thanks to the integrated warehouse mode
can be used to supply 12V consumers
High quality housing made of cast aluminum
Protection against application errors: Polation on battery (fuse), protection against over temperature, protection against the start of the start
Completely covered: waterproof, shock -protected and fire -retardant ??Water, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are covered with resin.
One of the highest load efficiency of all time!?
Set a new industrial standard: With an efficiency of at least 92 % or more, these chargers produce three to four times less heat.
Adaptive 5-stage loading algorithm?
The Blue Smart 12/25 IP67 charger is characterized by its microprocessor-controlled, "adaptive" battery management. "Adaptive" means that the loading process is automatically adjusted to the type of battery use.
"Bulk" (constant trump phase)
"Absorption" (constant voltage phase)
"Recondition" (regeneration phase)
"Float" (loading tension phase)
"Storage" (warehouse mode)
Warehouse mode: Less maintenance and aging in the resting state of the battery
The warehouse mode is always activated if no discharge has been carried out within 24 hours. In storage mode, the loading tension is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) in order to minimize gas development and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure.
Significant differences to the Blue Smart IP 65 family
The two device groups differ in the following points:
The type of protection, the IP 67 devices have the best possible protection
Blue Smart IP 65 devices have a 7-stage loading algorithm, with the IP67 it is 5-stated
Delivery time: 1-3 working days
Scope of delivery:
1x VICTRON BPC122513006 Blue Smart IP67 12/25 25a 12v 230V Battery charger
1x operating instructions
1x 1.5m battery connection cable red/black
BPC121713006
Victron Blue Smart 12/17 IP67 charger 17A 12V 230 volts
The Blue Smart IP 67 12/17 12v 230V battery charger from Victron Energy (MPN BPC121713006) is a smart, high-performance battery charger of the latest generation with 17A charging current for charging 12V AGM, gel and lead and leading batteries, such as lithium ions. In terms of function, the Blue Smart IP67 series is identical to the chargers of the Blue Smart IP 65 and IP 22 device families. Only the application environment for which these chargers are designed differ.
Thanks to the integrated Bluetooth, the Blue Smart IP 67 battery chargers offer a wireless solution for monitoring voltage and electricity, for adapting settings and updating the charger when new functions are available.
Important features of the Blue Smart IP67 12/17 17A battery charging device
Victron part number: BPC121713006
Model description: Blue Smart IP 67 12/17
Max. Charging current: 17a
For battery voltage: 12V DC
For mains voltage: 180-265 VAC 45-65 Hz
Completely covered: waterproof, shock -protected and fire -retardant
Smart configuration and monitoring via integrated Bluetooth and free app
adaptive, 5-stage loading algorithm
extends the life of your batteries thanks to the integrated warehouse mode
can be used to supply 12V consumers
High quality housing made of cast aluminum
Protection against application errors: Polation on battery (fuse), protection against over temperature, protection against the start of the start
Completely covered: waterproof, shock -protected and fire -retardant
Water, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronics are covered with resin.
One of the highest level of loading effects of all time!
Set a new industrial standard: With an efficiency of at least 92 % or more, these chargers produce three to four times less heat.
adaptive 5-stage loading algorithm
The Blue Smart 12/17 IP67 charger is characterized by its microprocessor-controlled, "adaptive" battery management. “Adaptive” means that the loading process is automatically adjusted to the type of battery use.
"Bulk" (constant trump phase)
"Absorption" (constant voltage phase)
"Recondition" (regeneration phase)
"Float" (loading tension phase)
"Storage" (warehouse mode)
Warehouse mode: Less maintenance and aging in the resting state of the battery
The warehouse mode is always activated if no discharge has been carried out within 24 hours. In storage mode, the loading tension is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) in order to minimize gas development and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure.
Significant differences to the Blue Smart IP 65 family
The two device groups differ in the following points:
The type of protection, the IP 67 devices have the best possible protection
Blue Smart IP 65 Retäte have a 7-stage loading algorithm, in the IP67 it is 5-stated
Scope of delivery:
1x VICTRON BPC121713006 Blue Smart IP67 12/17 17A 12V 230V Battery charger
1x operating instructions
1x 1.5m battery connection cable red/black
Delivery time 1-3 working days
data sheet
Dimensions (LXBXH)
6.5 x 21.9 x 9.9cm
Weight
2.4 kg
Manufacturer
Victron Energy
guarantee
5 years of manufacturer's guarantee
Product
Adaptive, 4-stage 230V-12V battery charger with smartphone connection and support of all common types of battery.
BPC240842002
Victron Blue Smart IP22 24/8 (1) Charger 24V 8a 1 battery
The Blue Smart IP22 24/8 (1) charger of Victron Energy (MPN BPC240842002), is a professional, compact 24V 8A battery charger of the latest generation with a charging output and built -in Bluetooth! The Blue Smart IP22 24/8 (1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 24V lead batteries and modern lithium batteries. It offers
Highlights of the 24/8 (1) Blue Smart IP22 Charger
Intelligent charging until the perfect battery state ...
The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life.
Restoration of deep-downloaded "dead" batteries
Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections.
Call the battery status from afar, with the VictronConnect app
The Blue Smart IP22 24/8 (1) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
The most important technical features of the 24/8 (1) Blue Smart IP22 Charger
Victron part number: BPC240842002
Lades 24V lead-acid, gel, agm and lithium batteries
8a maximum charging current
1 battery charging output
Very compact dimensions: 235 x 108 x 65mm
Highly modern, seven-level loading algorithm
With integrated Bluetooth for use with the free VictronConnect app
Other features of the 24/8 (1) Blue Smart IP22 Batterieladers
Trend -setting efficiency
With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard.
Adaptive 7-stable loading algorithm
The 24/8 (1) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. "Adaptive" means that the loading process is automatically adjusted to the type of battery use.
Storage mode: Less maintenance and aging in the resting state of the battery
The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 24V battery) in order to minimize gas development and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure.
Delivery time: 1-3 working days
Scope of delivery:
1x Victron Energy BPC240842002 24/8 (1) IP22 Blue Smart Charger
1x operating instructions
IP protection
IP22
EAN
8719076037491
Ambient temperature
-20 ° C - +50 ° C
Manufacturer part number
BPC240842002
guarantee
2 years
humidity
Max. 98 %, not condensing
Manufacturer
Victron, Victron Energy
Weight
0.9 kg
Dimensions (LXBXH)
10.8 x 23.5 x 6.5 cm
3315
VOTRONIC 3315 VCC 2412-45 IUOU-LI 24V / 12V galvanically isolated B2B / charging converter / chargingbooster
The VCC 2412-45 iuou-Li from Votronic (3315) is a fully automatic, galvanized battery charging converter for special vehicles, high-quality motorhomes, boats with galvanic insulation. The loading converter (booster) of the "VCC" series has been developed according to the latest specifications for the mobile load of supply batteries (living space/on-board batteries), from the alternator (starter battery) during the journey. The device also ensures During the journey for a complete iU1ou2 loading character. The max. Charging current of the VCC 2412-45 is 45a and it can work with lead-acid, gel, AGM1, AGM2 and LIFEPO4 batteries. This device loads from a 24V Battery / alternator a 12V battery.
In contrast to the conventional separating relay, the charging voltage is lowered or raised according to charging program specification, therefore 6, 6 + plus vehicles are particularly suitable for euro standard.
Universally usable multi -talent
For on-board batteries in classic lyricic acid, lead-gel or lead-agm and modern lithium-lifepo4 technology, the 8 selectable charging programs ensure a surveillance-free, quick and gentle full load from every charging state with subsequent full maintenance and maintenance of the battery. Even on short trips, the battery is loaded with full charging current. Connected 12 V consumers are automatically supplied, even if the on-board network is heavily loaded. The automatic performance control ensures the necessary safety and starting capacity of the vehicle.
W up characteristics of the Votronic 3315 VCC 2412-45 iuou-Li
The VCC 2412-45 is B2B charger with galvanic insulation for charging 24V batteries from a 24V alternator / battery.
Max. Charging current: 45a, input voltage range 24V, invites 12V batteries, recommended battery capacity: 90 - 400 AH
Increases or reduces the voltage to the necessary level in order to be able to precisely charge the on-board battery with the optimal charging characteristic.
It compensates for line losses and voltage fluctuations in the alternator, such as that, for example, fully occur in Euro 6 vehicles (intelligent alternators) to a considerable extent.
Is characterized by compact design, low weight (high-frequency switch fashion technology) and vigorously dimensioned performance components for safe operation.
Significantly better energy balance of the on-board battery. No intervention in the starter circle; The device behaves like a strong consumer on the alternator.
The 12 V consumers provided are protected against overvoltage and voltage fluctuations.
The charging voltage is free of tips and regulated so that an overload of the batteries is excluded.
Fully automatic operation: The device is constantly connected to the batteries and is automatically activated by the running alternator of the vehicle. When the engine is standing, the batteries are not unloaded.
Parallel and buffer operation: With simultaneous consumption, the battery is charged or fully received. The adjustment of the loading times calculates and monitors the device automatically.
Surveillance-free charge: multiple protection against overload, overheating, overvoltage, short circuit, misconduct and battery recharge through electronic discounting up to the complete separation of the device and battery.
Construction network filter installed: Problemless parallel operation with other load sources (EBL, chargers, engine and fuel generators, solar systems) on a battery.
Charging cable compensation: Tension losses on the charging cables are automatically excavated.
Connection for battery temperature sensor (sensor included).
In the case of lead batteries (acid, gel, AGM), the charging voltage is automatically adjusted to the battery temperature. This causes a better full load of the weaker battery in the cold, and unnecessary battery launch is avoided in summer temperatures.
LIFEPO4 batteries: battery protection at high and particularly adapted load at low temperatures below 0 ° C. Charging aid for low-level lead batteries: gentle invitation of the (lead-acid,-gel, AGM) battery up to 8 V, then powerful support of the battery with any still switched on consumers.
Also ensures the automatic activation of a Lifepo4 battery switched off by the BMS.
What added value does the use of a B2B loading converter offer me?
The loading converters ensure the optimal and quick load of the supply battery from the alternator while driving. In contrast to the simple separation relay, the charging voltage is raised to the value, which is necessary for the respective battery type for a full load and required by the battery manufacturers. In this way, the full charging current can flow and in a short time invite handsome amounts of electricity into the battery. Long charging lines and losses, as well as voltage fluctuations on the alternator, are cleaned cleanly. For loading converters with different input and output voltages (12V/24V or 24V/12V), the simple load of a second battery is possible even without installing a second alternator.
The loading converters thus also provide the well-known high-quality quality of the battery charge of the Votronic chargers while driving. The intelligent microprocessor charging with "iu1ou2ou3" charging characteristics and dynamic charging time calculation automatically ensures the fast and gentle full load as well as subsequent charging of the connected batteries from any state of charge and always enables simultaneous care for consumers in parallel to the care battery.
Scope of delivery:
1x Votronic 3315 VCC 2412-45 IUOU-LI 45A loading converter
1x operating instructions (German)
1x temperature sensor
Technical specifications
Entrance of the vehicle starter battery "+ in Start"
Vehicle starter battery nominal voltage
24 V
Battery capacity (size), at least recommended
60 Ah
Input voltage area (Euro 6 +), D + controlled
22 - 32 V
Input overvoltage shutdown (Euro 6 +), max.
32.2 V
Performance recording max.
740 W
Electricity intake (with the lowest input voltage) max.
30 a
Electricity intake standby / off (KL.15 or D+ without signal)
0.11 a / 5 ma
Charging output on on-board supply battery "+ Out Bord"
Battery
12 V - 13.3 V
Battery capacity recommended / up to
90-300/400 Ah
Charging current Hauptladg., I-phase, 8 V to U1, 0-15h
45 a
Loading/buffer/load current, regulated U1-U2 phase
0 - 45 a
Selectable charging programs AGM/GEL/LEAD ACID, LIFEPO4
4
Minimum battery voltage for the start of the load
0 V
Vorbadestrom (Battery deepest discharge <8V), max.
22.5 a
Return current made of battery, off (KL.15 or D+ without signal)
0 A
Reset voltage AGM-Gel-Lead ACID / LIFEPO4 (30sec)
12.8 V/13.4 V
Charging limit limit (protection of consumers)
15.00 V
External overvoltage shutdown (20sec)
15.50 V
Tension
<30 MV RMS
Input for battery I-Temperature sensor
Yes
Charging timer
3-way
Group/short circuit/back load/safety protection
Yes
Overload protection
---
Security timer per load phase I / U1
Yes
EBL Start in, EVS measurement input / charging output
---
Load/cargo maintenance for 12 V-starter battery
---
Device installation position
any
Temperature range
-20 to 45 °
Speed -controlled, temperature -controlled fan
Yes
Gradual delegation of the charging capacity at over temperature
Yes
Safety shutdown at overheating
Yes
Dimensions, including fortified. Flanges and clamps (LXBXH)
245 x 160 x 71 mm
Weight
1700 g
Ambient conditions, humidity: max. 95 % room moisture, not condensing
Scope of delivery: temperature sensor, operating instructions
3100
Votronic Automatic Charger PB 1215 SMT 2B
The Automatic Charger PB 1215 SMT 2B from Votronic (MPN 3100) is a modern battery charger for mobile use. It has charging programs for gel, AGM, acidity and modern lithium batteries and is designed for 12V battery voltage. The charging current at the main exit is 15a. In addition, there is a side charging output for the starter battery, which can also deliver 2A charging current. The device is suitable for batteries with a capacity from 38AH to 170AH.
Important features of the PB 1215 SMT 2B battery loader
Reliably charges gel, AGM, acid and Lifepo4 battery
15a charging current, 2A charging current at the side charging output
Officelle votronic part number: 3100
Load options: 1 supply and 1 starter battery
The charging voltage is free of tips and regulated so that an overload of the batteries is excluded.
Fully automatic operation: The charger can be constantly connected to the battery and keeps it in full load. In the event of a network failure, the batteries will not be unloaded (separation by security switch).
Lithium LIFEPO4-MAINTENANCE, Auto Wake Up, maintenance phase: Regular automatic activation of the battery cell balancing every 10 days to ensure the full load of the battery.
Lead battery regeneration with long downtimes twice a week against harmful acidic layers.
Parallel and buffer operation: With simultaneous consumption, the battery is charged or fully received. The adaptation of the loading times calculates and monitors the charger automatically.
Monitoring-free charge: Multiple protection against overload, overheating, overvoltage, short circuit, polarity, misconduct and battery recharge through electronic stop to the complete separation of charger and battery with built-in safety switch.
Connection for battery temperature sensor (accessories temperature sensor 825, item no. 2001): In the case of lead batteries (acidity, gel, AGM), the charging voltage is automatically adjusted to the battery temperature, causes a better in cold Full loading of the weaker battery, in summer temperatures, unnecessary battery absorbing and thus battery stress is avoided.
With LIFEPO4 batteries, the battery temperature sensor is required for the function: it serves battery protection at high and especially at low temperatures below 0 ° C.
Silent Run function: At the push of a button noise-optimized way of working (night operation).
Power supply function: enables consumers to be supplied without a battery (e.g. battery change).
Charging cable compensation: Tension losses on the charging cables are automatically excavated.
Construction network filter: Problem-free parallel operation with solar systems, wind and benzingen generators, alternators etc. on a battery.
Charging aid for low -level lead batteries: gentle invitation to the (lead -acid, -gel, -gm) battery up to 8 V, then powerful support of the battery with any still switched on consumers.
Separation of the B -batteries in the event of a power failure, overheating, misconduct (safety switch per charging output).
Separate side charging output "S" for the support and maintenance charge of the vehicle starter battery.
Overview of the loading programs of PB 1215 SMT 2B
"Gel": charging program for gel batteries, characteristic Iu1ou2ou3 tailored to closed, gas-density gel/dryfit batteries with a defined electrolyte, which generally need a higher loading level and longer U1 holding times to achieve short loading times with particularly high capacity storage and one to avoid long-term battery "starvation".
"AGM": charging program for AGM/fleece batteries, characteristic Iu1ou2ou3 intended for loading closed, gas-density AGM (absorbent glass-mat) batteries in lead-fleece technology, which is a particularly high U1 level with coordinated holding times need for full charging and then a moderate U2 level to keep charging (plate and round cells technology).
"Universal": charging program for lead-acid/wet/AGM batteries, characteristic line iu1ou2ou3 universal program for loading and loading acid batteries in vehicles (mixed mobile/stationary). And good acid mixture for open and closed, low-maintenance, maintenance-free standard, drive, lighting, solar and heavy duty batteries, as well as AGM batteries with a normal U1 level.
"LIFEPO4": charging program for lithium batteries, characteristic Iu1ou2ou3 charging program matched to lithium-lifepo4 batteries with its own BMS and prescribed or built-in protective circuit. Lifetime advantageous charging level of 50-80% and also buffers 12 V consumers and the vehicle starter battery. In addition, a regular Auto Wake Up function activates the batteries cell balancing.
Scope of delivery:
1x Votronic 3100 PB 1215 SMT 2B battery charger
1x operating instructions (German)
Technical specifications:
Network voltage (network frequency 45 - 65 Hz)
110 V - 230 V
Network function voltage area, all types
85 V - 270 V, briefly 305 V (5 seconds)
Network voltage area for full charging power
95 V - 270 V
Network performance max.
240 W
Network performance recording at loading management
1.9 W
Active sinus-shaped power factor correction (Cosphi <= 1)
Yes
Charging current approx. 110 V network voltage
15 A
Main charging output battery I
Battery native voltage lead/lifepo4 battery
12 V / 12 V-13.3 V
Selectable charging programs lead gel/AGM/acidity, lifepo4
4
Battery capacity (recommended)
60 Ah - 110 Ah
Battery capacity (after application, e.g. Lifepo4)
38 Ah - 170 Ah
Charging current main load, i-phase, 8 V to U1; 0-15.5 h
15 A
Loading/buffer/load current, regulated U1-U2-U3 phase
0 a - 15 a
Minimum battery voltage for the start of the load
0 V
Preliminary flow, lowest -download batteries 0 V - 8 V
7.5 a
Return current made of battery (power failure)
<0.5 MA
Reset voltage (30 sec), battery type dependent
12.75 V / 13.25 V
Charging stress limit (protection of affiliated consumers)
15.0 V
External overvoltage shutdown (20 sec)
15.5 V
Tension
<30 MV RMS
Charging timer
4-fold
Group/short circuit/back load/safety protection
Yes
Safety timer per loading phase I-/U1-/U2-
Yes
Lead battery regeneration with a long service life, 2x aw. 1 H
Yes
Lifepo4 car Wake Up at a long time, 10 daily 0.5 h daily
Yes
or Lifepo4 lithium rest conservation (seasonal company)
Yes
Input for battery temperature sensor
Yes
Power supply operation (e.g. further supply for battery changes)
Yes
2. Sideline Vehicle Starter Battery II (registration output network)
Battery native voltage (lead)
12 V
Charging current or resilience as a registration output
0 a - 2 a
Group/short circuit/back load/safety protection
Yes
Connection for remote control automatic charger
Yes
Device installation position
any
Temperature range
-20 / +45 ° C
Speed -controlled, temperature -controlled fan
Yes
Gradual delegation of the charging capacity at over temperature
Yes
Safety shutdown at overheating
Yes
Fan noise lowering, night operation (Silent Run)
Yes
Protection class / protection class
I / IP21
Dimensions, Dimensions including fastening flanges/feet, without connections
228 x 139 x 74 mm
Weight
1250 g
Ambient conditions, humidity
Max. 95 % RF, not condensing
Safety regulations
EN 60335-2-29
Scope of delivery: network cable, operating instructions
0404
VOTRONIC Automatic Charger VAC 1215M 3A
Built-in mains chargers for emergency vehicles with very different usage cycles
Especially in rescue and emergency vehicles, the reliability of the batteries installed in the vehicle is crucial for the operational readiness of the vehicle. Above all, if many permanent consumers put a heavy load on the batteries, there is no time for recharging due to frequent use, or the charger is insufficiently matched to the batteries. In order to meet the special requirements of emergency vehicles, the VAC series was created in cooperation with vehicle and leading battery manufacturers.
Votronic charging technology has been used in professional emergency vehicles such as fire brigades, ambulances and coastguards for years! Quality - Made in Germany - !
The device electronics are protected against moisture and ensure safe operation in the event of strong temperature fluctuations. Permanent consumers connected to the vehicle electrical system (radio devices, charging cradle, etc.) are also supplied without impairing the charging process. The built-in charging current distributor also automatically supplies the starter battery with full charging current if required. When the vehicle is connected to the mains, the engine start lock can be activated via a message output.
The devices are supplied with a temperature sensor 825 to ensure that the batteries are optimally charged. The installation position is variable, thanks to a second device label included in the scope of delivery. Instead of a remote control, a waterproof LED display (see accessories) can be connected to the Remote Control connection socket, which indicates the operational readiness of the device on the outside of the vehicle.
Other special features at a glance:
Votronic products "Made in Germany"
High charging capacity even over short distances
Significantly improved energy balance of the on-board battery
Optimal charging characteristics for all battery types adjustable with battery selector switch (lead-acid, gel, AGM, lithium LiFePO4)
Suitable for all alternators
Automatic, adjustable power control ensures that the starter battery is primarily charged by the alternator when the vehicle electrical system is heavily loaded, thus ensuring that the vehicle can be started again immediately
Easy installation, no intervention in the vehicle's starter circuit required, device is connected to the charging line to the supply battery
Parallel operation to increase performance possible
Especially recommended for vehicles with the Euro 6 standard
temperature sensor 825 already included
The charging converters are also characterized by their compact design, low weight (high-frequency switching transformer, switch mode technology) and powerfully dimensioned power components. 6 operating displays provide information about the operating status of the device at any time.
Recommended accessories: Votronic remote control S (2075)
Technical data
Mains voltage (mains frequency 45 - 65 Hz)
110V-230V
Mains working voltage range, all types
85V - 270V, momentary 305V (5 sec)
Mains voltage range for full charging power
95V - 270V
Mains power consumption max.
240W
Current consumption (AC) max.
2.7A
Device switch stand-by
1.2W
Active sinusoidal power factor correction (CosPhi <= 1)
yes
charging current approx. at 110V mains voltage
15A
Charging outputs battery I + II
Battery nominal voltage lead/LiFePO4 battery
12V / 12V-13.3V
Battery capacity I or I+II (recommended)
60Ah - 110Ah
Battery capacity I or I+II (depending on application)
38Ah - 170Ah
Charging current main charge total, I-phase, 8 V to U1; 0-15.5h
15A
Charge/buffer/load current, regulated U1-U2-U3 phase
0A - 15A
Automatic charging current distributor for batt. I / battery II
yes
Minimum battery voltage for charging start
0V
Pre-charging current, deeply discharged batteries 0 V - 8 V
7.5A
Back current from battery (mains failure)
<0.5mA
Reset voltage (30 sec), battery type dependent
12.75V / 13.25V
Charging voltage limit (protection of connected consumers)
15.0V
External overvoltage shutdown (20 sec)
15.5V
Voltage Ripple
<30mVrms
Load timer
quadruple
reverse polarity/short circuit/back discharge/safety protection
yes
Safety timer for each charging phase I-/U1-/U2
yes
Lead battery regeneration in case of long standstill, 2x weekly. 1h
yes
LiFePO4 auto-wake up for long periods of standstill, 10 days 0.5 h
yes
or LiFePO4 lithium sleep float (seasonal use)
yes
Manual lead-acid equalization charge, equalization, charging current
2.5A
Equalization, charging voltage/charging time limit max.
16.0V/1.5h
Main charging output battery I (master)
Selectable charge programs lead gel/AGM/acid, LiFePO4
8
Charge/buffer/load current, regulated IU1oU2oU3 phase
0A - 15A
Input for battery temperature sensor
yes
Power supply operation (e.g. continued supply when changing the battery)
yes
2. Charging output battery II (built-in charging current distributor, switchable)
8 charging programs optionally the same as battery I
yes
or charging program for vehicle (lead) starter battery
yes
Charge/buffer/load current, regulated IU1oU2oU3 phase
0A - 15A
3. Next to charging output III (mains signaling output)
Battery nominal voltage (lead)
12V
Charging current or load capacity as signaling output
0A - 2A
reverse polarity/short circuit/back discharge/safety protection
yes
Connection for remote control Automatic Charger
yes
Device installation position
any
Temperature range
-20/+45 °C
Speed-controlled, temperature-controlled fan
yes
Gradual curtailment of the charging power in the event of overtemperature
yes
Overheating safety shutdown
yes
Fan noise reduction, night mode (Silent Run)
yes
Protection class/degree of protection
I / IP21
Dimensions - Dimensions including mounting flanges, without connections
205x160x72mm
weight
1250g
Ambient conditions, humidity
max. 95% RH non-condensing
Safety regulations
EN 60335-2-29
Scope of delivery power cable, 1 temperature sensor, operating instructions
.
BPC241242002
Victron Blue Smart IP22 24/12 (1) Charger 24V 12a 1 battery
The Blue Smart IP22 24/12 (1) charger of Victron Energy (MPN BPC241242002), is a professional, compact 24V 12A battery charger of the latest generation with a charging output and built -in Bluetooth! The Blue Smart IP22 24/12 (1) charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes and loads both classic 24V lead batteries and modern lithium batteries. It offers
Highlights of the 24/12 (1) Blue Smart IP22 Charger
Intelligent charging until the perfect battery state ...
The seven-level loading algorithm gets the best out of her battery. The charger provides the battery the energy it needs, it keeps it in a healthy condition, ensures better performance ... and a longer life.
Restoration of deep-downloaded "dead" batteries
Unlike most other brands and product series, the Blue Smart IP22 charger will try to recharge a deep-discharged battery by forceing it out with a weak charging current. The normal charging operation is then resumed as soon as there is sufficient voltage between the battery connections.
Call the battery status from afar, with the VictronConnect app
The Blue Smart IP22 24/12 (1) charger has built -in Bluetooth. In this way, the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
The most important technical features of the 24/12 (1) Blue Smart IP22 Charger
Victron part number: BPC241242002
Lades 24V lead-acid, gel, agm and lithium batteries
12a maximum charging current
1 battery charging output
Very compact dimensions: 235 x 108 x 65mm
Highly modern, seven-level loading algorithm
With integrated Bluetooth for use with the free VictronConnect app
Other features of the 24/12 (1) Blue Smart IP22 Batterieladers
Trend -setting efficiency
With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industrial standard. After the battery has also been fully charged, electricity consumption drops to less than 0.5 watts, which is about five to ten times better than the industrial standard.
Adaptive 7-stable loading algorithm
The 24/12 (1) Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. "Adaptive" means that the loading process is automatically adjusted to the type of battery use.
Storage mode: Less maintenance and aging in the resting state of the battery
The storage mode is always activated if no discharge has been carried out within 24 hours. The loading tension is then reduced to 2.2V/cell (13.2V for a 24V battery) in order to minimize gas development and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gas voltage. This achieves a kind of compensation charge that prevents the electrolystal layering and sulfating - the two main reasons for premature battery failure.
Delivery time: 1-3 working days
Scope of delivery:
1x Victron Energy BPC241242002 24/12 (1) IP22 Blue Smart Charger
1x operating instructions
IP protection
IP22
EAN
8719076037682
Ambient temperature
-20 ° C - +50 ° C
Manufacturer part number
BPC122044002
guarantee
2 years
humidity
Max. 98 %, not condensing
Manufacturer
Victron, Victron Energy
Weight
0.9 kg
Dimensions (LXBXH)
10.8 x 23.5 x 6.5 cm
C140002
CS-Electronic XF2 automatic LIFEPO4 charger suitable for all 6V Lium batteries
The new XF-2 LIFEPO4 Lithium battery charger from CS-Electronic was specially developed for the safe and easy loading of the new 6V lithium-iron phospaht (LIFEPO4).
The focus was on simple and safe handling. The Mikrocessor-controlled LIFEPO4 charger analyzes the infected 6V lithium battery and loads it in a targeted and safe manner.
Features:
Automatic charging start
500mA charging power
240v Installed power supply!
Loads without additional charging cables by connecting the XT60 plug -in contact
Only invites CS-Lifepo4 lithium-iron-phosphate batteries with 6V
Technical specifications:
Network voltage: 100-240V
Charging current: 100 - 500mA
Cell number Life: 2 cells / 2s
Battery connection: XT60 plugs
Weight: 68g
Dimensions: 64 x 28 x 80mm
Scope of delivery:
1 x XF-2 automatic LIFEPO4 charger
1 x connection cable with XT60 plugs, go with all CS 6V classic car batteries
1 x operating instructions German/English
3339
VOTRONIC 3339 DC voltage converter DCDC 2412-45 24V/12V Galvanian isolated
Delivery time: 1-3 working days
This Votronic DC converter of the DCDC series enables 12V consumers to operate on 24V-board networks without being needed for this.
The devices can be operated at an early stage with up to 30% overload, so that switch-on, lace and start-up currents of the various consumers are also collected.
For safety against voltage, defective mass lines or similar, galvanic insulation is installed between the entrance and output side. This ensures flawless, independent mass ratios on both sides even with long connection cables, sensible e.g. for large vehicles, containers, roll containers, supporters etc.
After activating the DC converters on the ON / OFF control input, which can either be done either by a switching signal, vehicle ignition or D+, the voltage monitoring of the battery is also ready for operation (charging detection on the starter battery, undervoltage shutdown).
Output voltage:
It is stabilized and smoothed and is therefore ideally suited even for sensitive consumers. The output voltage can be set to three fixed, stabilized output voltages.
In the fourth switch position, the height of the input voltage at the output is variable.
In this operating mode, those consumers that obtain additional information from the 24V operating voltage are then advantageous, e.g. starter battery is loaded, driving or stand operation, independent shutdown for undervoltage and battery discharge (small devices, charging bowls, illuminants) etc.
Device properties:
The Output voltage is Stabilized, free of tips, smoothed and filtered.
Galvanic isolation between entrance and output:
- Absolute separation of consumers and the battery circle, also in the error trap. This is a particularly important feature, for example, when operating 12V consumers, a higher 24V system voltage:
- No destruction of e.g. 12V consumers in the event of overvoltage due to 24V blows.
- No overvoltage at the output and thus with protection of consumers if the mass line is lost.
- Clean, undisturbed mass relationships even with long supply lines.
- Stable operating voltage on site in mobile operation, e.g. containers, trailers, roll containers etc.
- Filtering and suppression of disorders of the input on the output side.
Fully automatic continuous operation: The DC voltage converter can be constantly connected to the battery and consumers and works manually or automatically according to the set requirements.
Monitoring -free operation: Multiple protection against overload, overheating, overvoltage, short-circuit, misconduct and battery deep discharge through electronic discounting up to the complete switch-off By built-in security switch.
Supervision cable compensation: Tension losses on the cables are taken into account.
Built -in spare network filter: Problem-free parallel operation with solar systems, wind and benzingen generators, network chargers etc. on a battery.
Scope of delivery:
DC voltage converter DCDC 2412-45, operating instructions
System voltage
24v DC
Performance consumption briefly max.
960 W
Installation position
any
Tension
<30MV RMS
Starting current short 5s
58 a
Tension area max10s
9.0 V - 16 V
Performance consumption max
730 W
IP protection
IP21
Starter battery measuring input
Yes
Switch input D+ 15
Yes
Permanent current
45a / 58a
Minimal battery capacity recommendation
50Ah
Temperature range
-20 to + 45 ° C
Product
Voltage converter
Protective functions
54828,54829,54830,54179,54827
Output voltage
12.5 V / 13.0 V / 13.5 V / VIN / 2
humidity
Max. 95 % RF (not condensing)
Manufacturer
Votronic
Weight
1800 g
Dimensions (LXBXH)
245 x 160 x 71 mm
3337
Votronic 3337 DC voltage converter DC/DC 1212-45 12V/12V Galvanian isolated
This votronic DC converter of the DCDC series enables 12V consumers to operate 12V-board networks without being needed for this.
The devices can be operated at an early stage with up to 30% overload, so that switch-on, lace and start-up currents of the various consumers are also collected.
For safety against voltage, defective mass lines or similar, galvanic insulation is installed between the entrance and output side. This ensures flawless, independent mass ratios on both sides even with long connection cables, sensible e.g. for large vehicles, containers, roll containers, supporters etc.
After activating the DC converters on the ON / OFF control input, which can either be done either by a switching signal, vehicle ignition or D+, the voltage monitoring of the battery is also ready for operation (charging detection on the starter battery, undervoltage shutdown).
Output voltage:
It is stabilized and smoothed and is therefore ideally suited even for sensitive consumers. The output voltage can be set to three fixed, stabilized output voltages.
In the fourth switch position, the height of the input voltage at the output is variable.
In this operating mode, those consumers that obtain additional information from the 12V operating voltage are then advantageous, e.g. starter battery is loaded, driving or stand operation, independent shutdown with undervoltage and battery discharge (small devices, charging trays, illuminants) etc.
Device properties of the DCDC series:
The Output voltage is Stabilized, free of tips, smoothed and filtered.
Galvanic isolation between entrance and output:
Absolute separation of consumers and the battery circle, also in the error trap. This is a particularly important feature, for example, when operating 12V consumers, a higher 24V system voltage:
No destruction of e.g. 12V consumers in the event of overvoltage due to 24V blows.
No overvoltage at the output and thus with protection of consumers if the mass line is lost.
Clean, undisturbed mass relationships even with long supply lines.
Stable operating voltage on site in mobile operation, e.g. containers, trailers, roll containers etc.
Filtering and suppression of disorders of the input to the output side.
Fully automatic continuous operation: The DC voltage converter can be constantly connected to the battery and consumers and works manually or automatically according to the set requirements.
Monitoring -free operation: Multiple protection against overload, overheating, overvoltage, short-circuit, misconduct and battery deep discharge through electronic discounting up to the complete switch-off By built-in security switch.
Supervision cable compensation: Tension losses on the cables are taken into account.
Built -in spare network filter: Problem-free parallel operation with solar systems, wind and benzingen generators, network chargers etc. on a battery.
Scope of delivery:
DC voltage converter DCDC 1212-45, operating instructions
Technical specifications
Output voltage, adjustable in [V]
12,5 / 13 / 13,5
Output permanent current/short. Top current in [a]
45 / 58
Input voltage in [V]
12
Max. Electricity in [a]
70
Switch input D+
Yes
Measurement receipt control by start battery
Yes
Temperature range [° C]
-20 to +45
Protection level/class
IP 21
Dimensions (WXHXT) in [mm] - Dimensions including fastening flanges, without connections
160 x 71 x 245
Weight in [g]
1800
Standards (CE)
EN 60335-2-29
Ambient conditions, humidity: max. 95% room moisture, not condensing
Scope of delivery: operating instructions