Solar Panels
-
News
- Complete Systems
- Batteries
- Electronics
- Installation
- Expansion
- Solar Technology
- Marken
Filter
–
3-01-011075
Offgridtec OLP 155W Solar Panel 12V Shingle Technology PERC
Offgridtec OLP 155W ein leistungsstarkes 12V Solarmodul mit innovativem Overlapping-Design Wafer-Bestückung, weißt Abmessungen vor, die bis jetzt nur Hochleistungssolarmodule erreichen konnten. Die Schindel-Anordnung der Wafer sorgt für einen optimalen Stromfluss durch minimierte Leistungsverluste und einen deutlich höheren Modulwirkungsgrad durch bessere Platzausnutzung. Die verwendete PERC-Technologie verbessert die Lichtaufnahme und erhöht den Leistungsertrag.
Eigenschaften:Einzigartiges Moduldesign mit überlappender Wafer-Anordnung (Overlapping-Design) sorgt für einen sehr hohen Modulwirkungsgrad durch bessere Flächenausnutzung und reduzierte Leistungsverluste durch Leitungswiderstände.Moderne, homogene Optik ohne sichtbare Leiterbahnen.Innovative PERC-Technologie sorgt für verbesserte Absorption bei längeren Wellenlängen, z.B. bei flachen Einstrahlungswinkeln (frühmorgens oder abends) oder bei BewölkungWeniger Verlust bei TeilverschattungDank Endfertigung nach Overlapping-Design hat das Modul bei einer Nennleistung von 155W einen Platzbedarf von gerade einmal 650 x 1310 x 35mm. Der Zellwirkungsgrad liegt bei über 23%.Innovative PERC-Technologie
Die PERC-Technologie (Passivated Emitter Rear Cell) bzw. Rückseitenpassivierung) in den Offgridtec OLP Solarmodulen sorgt mit seiner Schlüsseltechnologie für einen höheren Wirkungsgrad der Solarzellen. Auf der Zellenrückseite wird zwischen der herkömmlichen Aluminium-Metallisierung und der Siliziumwafer-Schicht eine dielektrische Schicht erzeugt, die durch einen Laser mit kleinsten Löchern versehen wird. Diese dielektrische Schicht reflektiert Licht, dass ohne Erzeugung von Ladungsträgern bis zur Rückseite dringt, in die Solarzelle. Durch die Reflexion erhalten die Photonen eine "zweite Chance" Strom zu erzeugen. Neben der höheren Effizienz bei unterschiedlichen Wellenlängen und der erhöhten Wahrscheinlichkeit, dass Elektronen zur Leistung beitragen, trägt die PERC-Technologie zu niedrigeren Systemkosten und einer Steigerung des Flächenenergieertrags bei.
Technische Daten:Generatorleistung: 155WpModulspannung (VMP): 21,8VKurzschlussstrom (ISC): 7,54ALeerlaufspannung (VOC): 25,7VMax. Strom (IMP): 7,11AMax. Systemspannung: 1000 V/DCZell-Wirkungsgrad: >23%Umgebungstemperatur: -40 bis +85°CAbmessungen: 1310 x 650 x 35mmGewicht: 9,37kgLieferumfang:Offgridtec® OLP 155W 12V PERC Overlapping Solarpanel 12V Schindeltechnologie
€158.53*
Not in stock
3-01-018415
Offgridtec PCB-ETFE 200W 39V Semiflexible Solar Panel
Das PCB-ETFE 200W Solarpanel von Offgridtec setzt neue Standards mit hochwertigen Materialien wie Teflon-Derivaten vorne, Fiberglas hinten und 5-Busbar-Technologie. Es ist semiflexibel und ideal für 24V-Systeme mit einer Betriebsspannung von über 30,8V. Für 12V-Systeme werden MPPT Laderegler benötigt, die höhere Modulspannungen verarbeiten können. Diese und weitere Qualitätsmerkmale machen das PCB-ETFE 200W von Offgridtec zu einem universell einsetzbaren Produkt der Oberklasse, dass sich auf Booten genauso wohl fühlt wie auf Fahrzeug-Dächern oder anderen Oberflächen und wie kein zweites Stabilität, höchste Zuverlässigkeit und Performance vereint. Es handelt sich um die verbesserte Version unseres 200W 39V Moduls. Diese neue Version bietet eine niedrigere Betriebsspannung, während gleichzeitig der maximale Strom und der Kurzschlussstrom erhöht wurden, was auf eine gesteigerte Effizienz und Leistungsfähigkeit des Moduls hinweist.
Bestückt mit monokristallinen A-Grade Solarzellen
Zellenwirkungsgrad von über 22,3%
5 Busbar Technologie
PCB-Backsheet
Begehbar und auch im feuchten Zustand noch rutschfester als vergleichbare Solarmodule
Semiflexibel - biegbar bis maximal 18 Grad (längsseitig)
Leichte Montage des Solarpanels durch Verkleben oder Nutzung der Ringösen
Hohe Lichtdurchlässigkeit von max. 96%
Vormontiertes Solarkabel mit MC4 Stecker und Buchse
Bewährte Offgridtec Qualität
Anwendungsgebiete der Offgridtec PCB-ETFE Serie- uneingeschränkt im Marine-Bereich einsetzbar - bestens geeignet zur Montage auf Wohnmobil, Bus und anderen Fahrzeuge - für die Installation auf gerundeten Blechdächern - empfohlen für alle Systeme, bei denen höchste Zuverlässigkeit und Performance gefordert sind - zur Aufhängung z.B. Zelten beim Campen bestens geeignet, durch die PCB-Trägerschicht halten die Ringösen auch sehr hohen mechanischen Belastungen stand
ETFE High-Tec Kunststoff auf der FrontseiteDie Frontseite des Solarpanels ist mit einer High-Tec Kunststoffschicht bedeckt welche auf Ethylen-Tetrafluorethylen-Copolymer ETFE – einem Teflon Derivat (PTFE) – basiert und bietet hervorragenden Schutz vor schädlichen Umwelteinflüssen und ist auch für den Einsatz in Salzwasser geeignet. ETFE ist leichter und zugleich lichtdurchlässiger als andere Kunststofflösungen am Markt.
Extrem stabile Fiberglas (PCB) Trägerplatte als Rückseite#Die Rückseite aus Fiberglas (PCB) macht das Modul wesentlich stabiler als herkömmliche Panels mit TPT-Rückseite. Folgende Vorteile bietet Ihnen dieser Aufbau:- verhindert Blasenbildung, die bei TPT-Modulen auf Grund falsche Verklebung auftreten kann - verträgt höhere Temperaturen im Vergleich zum TPT-Aufbau - reduziert die Gefahr von Zellbrüchen durch versehentliches überbiegen des Panels durch den Benutzer
Dieses Produkt ist das Ergebnis von gesammelter Erfahrung aus Tausenden Installationen in allen erdenklichen Anwendungsbereich. Bereits vor 5 Jahren haben wir unsere erste Serie flexibler Solarzellen erfolgreich am Markt etablieren können und haben seitdem unsere Module ständig weiterentwickelt und optimiert. Mit der PCB-ETFE Serie profitieren Sie von dieser einmaligen Expertise und können sich auf ein langlebiges Produkt freuen, dass für viele Jahre zuverlässig Strom produzieren wird.
Technische Daten- Generatorleistung: 200 Wp - Arbeitsspannung (Vmp): 30,8 V - Leerlaufspannung (Voc): 36,0 V - max. Strom (Imp): 6,50 A - Kurzschlussstrom (Isc): 6,82 A - max. Systemspannung: 200 V - Leistungstoleranz: +/- 3% +- Betriebstemperatur: -40 bis +85°C - Schutzart: IP67- Zellen pro Modul: 3 x 18 - Größe der Zellen: 182 x 91mm - Abmessungen Modul: 1770 x 580 x 3mm - Gewicht: 5,02 kg
Lieferumfang:Offgridtec 3-01-010845 PCB-ETFE 200W 30,8V semiflexibles Solarpanel
€279.40*
Not in stock
3-01-010510
Offgridtec 100W 39V Monocrystalline Solar Module
Das Offgridtec 100 W 39V liefert eine Leistung von 100 Watt und ist mit monokristallinen A-Grade Solarzellen bestückt welche auch bei schlechteren Lichtverhältnissen solide Ergebnisse liefern. Ideal für 12V oder 24V Systeme (12V nur bei MPPT Ladereglern welche die hohe Modulspannung verarbeiten können).Offgridtec Solarmodule sind ausschließlich mit Zellen, des höchsten Qualitäts-Grades bestückt und garantieren dank modernster Fertigung eine konstant hohe Qualität und Leistung bei maximaler Lebensdauer.
Wesentliche Merkmale: Leistung (Pmax): 100Wbewährte Qualität direkt von Offgridtechohe Betriebsspannung von 39,6V, perfekt für 24V Systemebei Einsatz eines MPPT Ladereglers auch hervorragend in 12V Solarsysteme integrierbargefertigt nach aktuellsten Normenmonokristalline A-Grade SolarzellenZellaufbau mit 5-Busbarsextrem widerstandsfähiges ESG-Glas machen das Modul einsetzbar auch bei widrigsten Umweltbedingungenideal für 12V-24V Systeme an Land oder in mobilen Solar-Systemen
Bewährtes, sofort betriebsbereites SolarmodulDas 100W 39V Mono ist eines von über 40 bewährten Solar-Panels aus dem Offgridtec Portfolio und partizipiert an Offgridtecs Erfahrung in der Herstellung hochwertiger 12V und 24V Solarzellen. Das Modul kann dank des extrem widerstandsfähigen Solarglases auch bei sehr widrigen Einsatzbedingen eingesetzt werden. Sturm oder extreme Kälte und Hitze übersteht es problemlos und dank der monokristallinen A-Grade Zellen können sie auch an wolkigen Tagen mit nennenswerten Erträgen rechnen.
technische Daten:Leistung (Pmax): 100 WattSpannung (Vmp): 39,6 Vmax. Strom (Imp): 2,53 ALeerlaufspannug (Voc): 47,52 VKurzschlussstrom (Isc): 2,73 Amax. Systemspannung: 1000 Vzulässige Umgebungstemperatur: -40°C - +85°CLänge Anschlusskabel: jeweils 90cmAbmessungen: 520 x 1050 x 35 mmGewicht: 6,15 kgStecksystem MC4Universell einsetzbarOffgridtec´s 100W 39V (24V) Mono ist universell einsetzbar zum Beispiel in 12/24 Volt Solaranlagen auf Gartenhäusern, Schrebergärten oder für die Stromversorgung von Beleuchtungs-Applikationen, autarke Systeme der Signal- und Überwachungstechnik und viele mehr. Aber auch in mobilen Systemen wie bei Wohnmobilsolaranlagen macht dieses Panel eine gute Figur.
Lieferumfang:1x Offgridtec 39V (24V) 100 W Solarzelle
€87.40*
Not in stock
3-01-012500
Offgridtec® ETFE-AL 160W 12V Semi-Flexible Solar Module
Das 160 Watt starke ETFE-ALU semi-flexible Solarpanel von Offgridtec basiert auf einer neuen, wegweisenden Material-Komposition (Aluminium-ETFE) und ist mit hoch-effektiven Mono-Zellen bestückt. Die Ausgangsspannung liegt bei 12VDC was es für eine Vielzahl von Anwendungs-Szenarien sehr interessant macht. Zudem ist es begehbar und deutlich rutschfester als seine Vorgänger was es für den Marine- und Mobilbereich zur perfekten Wahl macht. Der Strom wird von modernsten Solarzellen geliefert, die dank aktuellster MONO-PERC Technologie einen beachtlichen Zell-Wirkungsgrad vorweisen können und sich außerdem durch niedrige Werte bei der Leistungs-Degradation von der Masse abhebt.
Merkmale der ETFE ALU Serie von Offgridtec:Auf der Modul-Vorderseite sorgen 2 überlagerte ETFE Schichten für soliden Schutz der innenliegenden Zellen und eine hohe Lichtausbeute über viele Jahre hinweg. Dank einer neuen Struktur der äußersten Schicht wurde die Rutsch-Hemmung deutlich verbessert und das Modul kann problemlos begangen werden.Langfristig höhere Erträge durch bessere Lichtdurchlässigkeit und deutlich weniger Eintrübung der transparenten ETFE Front-Schichten im Vergleich zu herkömmlichen Solarmodulen mit abweichenden Frontbeschichtungen. Ausserdem bietet die solide ETFE-Front starken Schutz gegen Hagel und macht das Modul absolut beständig gegen Salzwasser.Strom-Management wird von 5 Busbars abgewickelt, so ist auch bei hohen Strömen ein solider Durchsatz ohne Wärmeverluste gewährleistet.Durch den das integrierte ALU-Backsheet ist das Entstehen von Zellrissen durch falsche Handhabung oder Montage nahezu ausgeschlossen.Die Serie wird mit besten Solarzellen bestückt, die einen hohen Zell-Wirkungsgrad von 22,3 Prozent bieten. Die Endfertigung der Module wird unter Anwendung modernster Fertigungsverfahren durchgeführt.Technische Merkmale:Leistung (Pmax): 160 WpSpannung (Vmp): 19,8 Vmax. Strom (Imp): 8,08 ALeerlaufspannung: 23,3 VKurzschlussstrom (Isc): 8,73 Amax. Systemspannung: 200 VModulwirkungsgrad: 22,3 %Abmessungen (LxBxH): 1260 x 680 x 4 mmBetriebs-Temperatur Bereich: -20°C - 75°Cintegrierte Bypass-DiodenGewicht: 6.3 KgMaterial-Komposition: Aluminium, ETFEbegehbar: JaBiegbar: max. 10° (L)Lieferumfang:1x Offgridtec 3-01-012500 ETFE-ALU 160W 12V semi-flexibles Solarmodul Alu-Backsheet
€225.18*
Available (more than 10)
3-01-018430
Offgridtec ETFE-AL 120W 20V Semi-flexible Solar Module
Das semi-flexible ETFE-AL 120W V2 Solarpanel von
Offgridtec (MPN 018430) basiert auf einer wegweisenden Material-Komposition (Aluminium-ETFE) und ist mit hoch-effektiven Mono-Zellen bestückt. Die Ausgangsspannung liegt bei 18V DC, was es für eine Vielzahl von Anwendungs-Szenarien sehr interessant macht. Zudem ist es begehbar und deutlich rutschfester als seine Vorgänger, dadurch ist es für den Marine- und Mobilbereich die perfekte Wahl. Der Strom wird von modernsten Solarzellen geliefert, die dank aktuellster Technologie einen beachtlichen Zell-Wirkungsgrad vorweisen können und sich außerdem durch niedrige Werte bei der Leistungs-Degradation von der Masse abhebt.Es handelt sich um die neue und verbesserte Version des beliebten ETFE-AL 120W Solarpanels (3-01-011050), es garantiert dank modernster Fertigung eine konstant hohe Qualität und Leistung bei maximaler Lebensdauer.
Über das 120W ETFE AL V2 Solarmodul
2 überlagerte ETFE Schichten
verbesserte Rutsch-Hemmung
langfristig höhere Erträge durch bessere Lichtdurchlässigkeit
solide ETFE-Front bietet Schutz gegen Hagel
beständig gegen Salzwasser
arbeitet mit 5 Busbar-Technologie
integriertes AL-Backsheet
ETFE Schichten
Auf der Modul-Vorderseite sorgen 2 überlagerte ETFE Schichten für soliden Schutz der innenliegenden Zellen und eine hohe Lichtausbeute über viele Jahre hinweg. Dank einer neuen Struktur der äußersten Schicht wurde die Rutsch-Hemmung deutlich verbessert und das Modul kann problemlos begangen werden. Langfristig werden höhere Erträge durch bessere Lichtdurchlässigkeit und deutlich weniger Eintrübung der transparenten ETFE Front-Schichten im Vergleich zu herkömmlichen Solarmodulen mit abweichenden Frontbeschichtungen erzielt. Die solide ETFE-Front bietet starken Schutz gegen Hagel und macht das Modul absolut beständig gegen Salzwasser. Durch das integrierte AL-Backsheet ist das Entstehen von Zellrissen durch falsche Handhabung oder Montage nahezu ausgeschlossen. Die Serie wird mit besten Solarzellen bestückt, die einen hohen Zell-Wirkungsgrad von 22,3 Prozent bieten.
5 Busbar-Technologie
Das Strom-Management wird von 5 Busbars abgewickelt. Bei dieser fortschrittlichen Technologie erfolgt die Stromverwaltung über fünf elektrische Leiterbahnen (Busbars). Dies ermöglicht einen zuverlässigen Durchsatz, selbst bei hohen Stromstärken, während gleichzeitig Wärmeverluste minimiert werden. Durch die effiziente Verteilung des Stroms wird eine solide Leistungsfähigkeit der Solarmodule sichergestellt, was zu einer verbesserten Gesamteffizienz und höheren Erträgen führt.
Monokristalline Solarzellen
Monokristalline Solarmodule sind eine fortschrittliche Form von Photovoltaik-Modulen, die aus einem einzigen Kristallgitter hergestellt werden. Dieser kristalline Aufbau ermöglicht eine höhere Effizienz bei der Umwandlung von Sonnenlicht in elektrische Energie im Vergleich zu anderen Arten von Solarmodulen. Die monokristallinen Zellen zeichnen sich durch ihre gleichmäßige Struktur aus, die eine effizientere Bewegung der Ladungsträger ermöglicht. Dies führt zu einer besseren Leistungsfähigkeit, insbesondere in Situationen mit begrenztem Platzangebot, da monokristalline Module eine höhere Leistungsdichte aufweisen.
Technische Merkmale des ETFE-AL
Leistung (Pmax): 120 Wp
Spannung (Vmp): 18,8 V
max. Strom (Imp): 6,39 A
Kurzschlussstrom (Isc): 6,70 A
Leerlaufspannung (Voc): 22 V
max. Systemspannung: 200 V
Abmessungen (LxBxH): 1120 x 580 x 4 mm
Betriebs-Temperatur Bereich: -40°C - 85°C
Modulwirkungsgrad: 22,3%
integrierte Bypass-Dioden
Material-Komposition: Aluminium, ETFE
begehbar: Ja
Biegbar: max. 10° (L)
Gewicht: 4,19kg
Lieferumfang:
1x Offgridtec ETFE-AL 120W V2 semi-flexibles 18V Solarmodul
€143.97*
€147.03*
Available (more than 10)
3-01-011070
Offgridtec® OLP 100W Solar Panel 12V Shingle Technology PERC
Das Offgridtec OLP 100W ist ein leistungsstarkes 12V Solarmodul mit innovativem Overlapping-Design Wafer-Bestückung und weißt Abmessungen vor, die fast in den Bereich der Hochleistungssolarmodule reichen. Die Schindel-Anordnung der Wafer sorgt für einen optimalen Stromfluss durch minimierte Leistungsverluste und einen deutlich höheren Modulwirkungsgrad durch bessere Platzausnutzung. Die verwendete PERC-Technologie verbessert die Lichtaufnahme und erhöht den Leistungsertrag.
AlleinstellungsmerkmaleEinzigartiges Moduldesign mit überlappender Wafer-Anordnung (Overlapping-Design) sorgt für einen sehr hohen Modulwirkungsgrad durch bessere Flächenausnutzung und reduzierte Leistungsverluste durch Leitungswiderstände.Moderne, homogene Optik ohne sichtbare Leiterbahnen.Innovative PERC-Technologie sorgt für verbesserte Absorption bei längeren Wellenlängen, z.B. bei flachen Einstrahlungswinkeln (frühmorgens und abends) oder bei BewölkungWeniger Verlust bei TeilverschattungDank Endfertigung nach Overlapping-Design hat das Modul bei einer Nennleistung von 100W einen Platzbedarf von gerade einmal 988 x 560 x 30mm. Der Zellwirkungsgrad liegt bei über 23%.Innovative PERC-Technologie
Die PERC-Technologie (Passivated Emitter Rear Cell bzw. Rückseitenpassivierung) in den Offgridtec OLP Solarmodulen sorgt mit seiner Schlüsseltechnologie für einen höheren Wirkungsgrad der Solarzellen. Auf der Zellenrückseite wird zwischen der herkömmlichen Aluminium-Metallisierung und der Siliziumwafer-Schicht eine dielektrische Schicht erzeugt, die durch einen Laser mit kleinsten Löchern versehen wird. Diese dielektrische Schicht reflektiert Licht, dass ohne Erzeugung von Ladungsträgern bis zur Rückseite dringt, in die Solarzelle. Durch die Reflexion erhalten die Photonen eine "zweite Chance" Strom zu erzeugen. Neben der höheren Effizienz bei unterschiedlichen Wellenlängen und der erhöhten Wahrscheinlichkeit, dass Elektronen zur Leistung beitragen, trägt die PERC-Technologie zu niedrigeren Systemkosten und einer Steigerung des Flächenenergieertrags bei.
Technische DatenGeneratorleistung: 100WpSystemspannung: 12V/DCModulspannung (Vmp): 18,7VMax. Strom (Imp): 5,53ALeerlaufspannung (Voc): 22,1VKurzschlussstrom (Isc): 5,67AMax. Systemspannung: 1000V/DCZelltyp: Monokristallin PERCUmgebungstemperatur: -40°C bis +85°CZellwirkungsgrad: >23%Abmessungen: 988 x 560 x 30mmGewicht: 6,09 kgLieferumfang: Offgridtec® OLP 100W 12V PERC Overlapping Solarpanel 12V Schindeltechnologie
€122.02*
Available (more than 10)
LNSK-370M
Luxen Solar 370W Full Black Solar Module LUXNERI SERIES 4
Das Luxneri S4 370W Full-Black von Luxen Solar, ist ein modernes, monokristallines Solarmodul im Twin-Panel Design und 120er Halb-Zellen Layout. Dank der (9x) Multi-Busbar Technologie, drei integrierter By-Pass Dioden sowie der zweigeteilten Anordnung der Zellstränge, bietet dieses Solarpanel im Solobetrieb eine hohe Hot-Spot Resistenz und in Strings mit vielen Modulen eine solide Stromausbeute, selbst bei schlechtem Licht und Teilbeschattung. Das edle Full-Black Design macht es zu einer guten Wahl, wenn es darum geht, eine Solarzelle für Dachanlagen auf Wohngebäuden oder für Balkonkraftwerke und viele weitere Anwendungsbereiche zu finden.Technische DatenLeistung (Pmax): 370 Wp Spannung (Vmp): 34,13 V Max. Strom (Imp): 10,84 VLeerlaufspannung (Voc): 41,18VKurzschlussstrom (Isc): 11,34 AModulwirkungsgrad: 20,28%Betriebstemperatur: -40°C - +85°CMax. Systemspannung: 1500 VDC (IEC)Zelltyp: Half-Cut - Monokristallin • Anzahl Zellen: 120 (6x20)Gewicht: 20 kgAbmessungen: 1756 x 1039 x 35 mmSchutzart Anschlussdose: IP68Modulfarbe: Full-Black
Half-Cut Fertigung + Twin-Panel-Design = Mehr Ertrag bei weniger Hitze
Bei der Half-Cut-Cell Fertigung werden die Solarzellen mittels Infrarotlaser zerstörungsfrei halbiert. Dadurch können die 6 Zellstränge gebildet werden statt der üblichen 3. Diese Technologie halbiert den elektrischen Strom der Zelle und reduziert effektiv den inneren elektrischen Widerstand auf den Leiterbahnen und erhöht die Modulleistung um 2%. Die Half-Cut Fertigung ermöglicht zudem das Twin-Panel Design, denn dank der 6 Zellstränge lassen sich zwei separate Strompreise bilden, die je eine Hälfte des Solarmodul abdecken. Somit minimiert die Twin-Panel Technologie den Leistungsverlust bei Abschattungen und verbessert den Wirkungsgrad des gesamten PV-Systems.Reduzierte Hot-Spot Temperatur
Ein weiterer Vorteil der Half-Cut Fertigung Durch die Halbierung des elektrischen Stroms sowohl der Zellen als auch der Zellstränge kann die Hot-Spot-Temperatur um 50 % gesenkt werden, was die Zuverlässigkeit des PV-Moduls erhöht.25% reduzierter, thermischer Leistungsverlust
Da die halbierten Zellen nur den halben Arbeitsstrom haben, kann der thermische Leistungsverlust des PV-Moduls während des Betriebs beträchtlich um 25% reduziert werden und die Betriebstemperatur des PV-Moduls ist ebenfalls niedriger, was die Zuverlässigkeit des PV-Moduls verbessert, und die Gesamtleistung erhöht.Multi-Busbar Technologie
Im Vergleich zum konventionellen 5-Busbar-Design kann das innovative Multi-Busbar-Design mit 9 Busbars den Stromsammelpfad um 50 % verkürzen und dadurch den Innenwiderstand der Zelle deutlich verringern, was zu einer Leistungssteigerung von 1 % bis 1,5 % im Vergleich zum 5-Busbar-Design beiträgt. Das MBB-Design kann auch den Leistungsverlust abmildern, der durch blockierte elektrische Pfade im Falle von Mikrorissen in der Zelle und Erosion der Fingerelektroden aufgrund externer Faktoren verursacht wird.
Lieferumfang 1x 3-01-016420 Luxen Solar Luxneri S4 Full-Black von Luxen Solar 370WDatenblatt:Garantie: 12 Jahre HerstellergarantieGeneratorleistung wp: 370 WpGewicht: 20kgHersteller: Luxen SolarKurzschlussstrom (ISC): 11,34 ALeerlaufspannung (VOC): 41,18 VMax. Systemspannung: 1500 DC (IEC)Modulspannung (VMP) : 34,13 VSchutzart (IP): IP68Zellenwirkungsgrad: 20,28 %max. Strom (IMP): 10,84 A
€92.32*
Not in stock
3-01-012510
Offgridtec® OLP 70W Solar Panel 12V Shingle Technology PERC
Das Offgridtec OLP 70W ist ein leistungsstarkes 12V Solarmodul mit innovativem Overlapping-Design Wafer-Bestückung und weißt Abmessungen vor, die fast in den Bereich der Hochleistungssolarmodule reichen. Die Schindel-Anordnung der Wafer sorgt für einen optimalen Stromfluss durch minimierte Leistungsverluste und einen deutlich höheren Modulwirkungsgrad durch bessere Platzausnutzung. Die verwendete PERC-Technologie verbessert die Lichtaufnahme und erhöht den Leistungsertrag.
Technische Merkmale: Leistung (Pmax): 70WpSpannung (Vmp): 19,7Vmax. Strom (Imp): 3,55ALeerlaufspannung (Voc): 23,2VKurzschlussstrom (Isc): 3,83Amax. Systemspannung: 1000VAbmessungen: 590 x 670 x 30mmAnzahl Zellen: 76 (4x19)Gewicht: 5,22KGOLP Serie von Offgridtec:Einzigartiges Moduldesign mit überlappender Wafer-Anordnung (Overlapping-Design) sorgt für einen s ehr hohen Modulwirkungsgrad durch bessere Flächenausnutzung und reduzierte Leistungsverluste durch Leitungswiderstände.Moderne, homogene Optik ohne sichtbare Leiterbahnen.Innovative PERC-Technologie sorgt für verbesserte Absorption bei längeren Wellenlängen, z.B. bei flachen Einstrahlungswinkeln (frühmorgens und abends) oder bei BewölkungWeniger Verlust bei TeilverschattungDank Endfertigung nach Overlapping-Design hat das Modul bei einer Nennleistung von 30W einen Platzbedarf von gerade einmal 590 x 670 x 30mm. Der Zellwirkungsgrad liegt bei über 23%.
Die PERC-Technologie (Passivated Emitter Rear Cell bzw. Rückseitenpassivierung) in den Offgridtec OLP Solarmodulen sorgt mit seiner Schlüsseltechnologie für einen höheren Wirkungsgrad der Solarzellen. Auf der Zellenrückseite wird zwischen der herkömmlichen Aluminium-Metallisierung und der Siliziumwafer-Schicht eine dielektrische Schicht erzeugt, die durch einen Laser mit kleinsten Löchern versehen wird. Diese dielektrische Schicht reflektiert Licht, dass ohne Erzeugung von Ladungsträgern bis zur Rückseite dringt, in die Solarzelle. Durch die Reflexion erhalten die Photonen eine "zweite Chance" Strom zu erzeugen. Neben der höheren Effizienz bei unterschiedlichen Wellenlängen und der erhöhten Wahrscheinlichkeit, dass Elektronen zur Leistung beitragen, trägt die PERC-Technologie zu niedrigeren Systemkosten und einer Steigerung des Flächenenergieertrags bei.
Lieferumfang:Offgridtec® OLP 70W 12V PERC Overlapping Solarpanel 12V Schindeltechnologie
€73.62*
Available (more than 10)
3-01-018395
Offgridtec® 150W MONO 12V Solar Panel
Das Solarmodul MONO 150W V2 Black Frame von Offgridtec arbeitet mit monokristallinen Solarzellen mit einem hohen Wirkungsgrad von 22,3%. Es eignet sich dank seiner 23V Betriebsspannung ideal für eine Vielzahl von Anwendungsbereichen. Diese Konstelation sorgt für eine hohe Performance und reduzierte Ertragsverluste durch Spannungsabfälle. Es handelt sich um die neue und verbesserte Version des beliebten MONO 150W Solarmoduls und garantiert dank modernster Fertigung eine konstant hohe Qualität und Leistung bei maximaler Lebensdauer.
Rahmen: schwarz
bewährte Qualität direkt von Offgridtec
gefertigt nach aktuellsten Normen
positive Leistungstoleranz
monokristalline Solarzellen
extrem widerstandsfähiges ESG-Glas macht das Modul einsetzbar auch bei widrigsten Umweltbedingungen
2 Bypass Dioden - minimierter Leistungsabfall bei Beschattung
sofort betriebsbereites Solarmodul
Monokristalline ModuleMonokristalline Solarmodule sind eine fortschrittliche Form von Photovoltaik-Modulen, die aus einem einzigen Kristallgitter hergestellt werden. Dieser kristalline Aufbau ermöglicht eine höhere Effizienz bei der Umwandlung von Sonnenlicht in elektrische Energie im Vergleich zu anderen Arten von Solarmodulen. Die monokristallinen Zellen zeichnen sich durch ihre gleichmäßige Struktur aus, die eine effizientere Bewegung der Ladungsträger ermöglicht. Dies führt zu einer besseren Leistungsfähigkeit, insbesondere in Situationen mit begrenztem Platzangebot, da monokristalline Module eine höhere Leistungsdichte aufweisen.
Technische Daten- Leistung (Pmax): 155W - Arbeitsspannung (Vmp): 23,9 V - Toleranz: +/-3% - Leerlaufspannug (Voc): 28 V - NOCT: 45+/-2°C- max. Strom (Imp): 6,49 A - Kurzschlussstrom (Isc): 6,81 A - max. Systemspannung: 1000 V DC - Wirkungsgrad: 22,3% - zulässige Umgebungstemperatur: -40°C - +85°C - Abmessungen: 1350 x 590 x 35 mm - Gewicht: 8,9kg
Universell einsetzbarOffgridtec' s 150W 23V Mono ist universell einsetzbar zum Beispiel in 12 Volt Solaranlagen auf Gartenhäusern, Schrebergärten oder für die Stromversorgung von Beleuchtungs-Applikationen. Aber auch in mobilen Systemen wie bei Wohnmobilsolaranlagen macht dieses Panel eine gute Figur.
Die Anschlusskabel sind 80 cm lang und mit MC4-Steckern bestückt.
Lieferumfang1x Offgridtec MONO 150W V2 Solarmodul 23V Black Frame
€117.40*
€120.10*
Available (more than 10)
LNVB-405MD
Luxen Solar 405W Mono Bifacial Glass-Glass Solar Panel S5 Full Black Half-Cut
Das monokristalline und bifaziale Solarmodul 405W S5 von Luxen Solar (MPN: LNVB-405MD) überzeugt durch eine Kombination verschiedener Technologien, wie zum Beispiel der Dotierung mit dem Metall Gallium, die das Phänomen der lichtinduzierten Degradation vorbeugt. Zur Leistungssteigerung wurde bei der Produktion außerdem die Halbzellen-Technologie angewandt. Und der Hersteller Luxen vertraut auf sein Produkt: Er garantiert eine 30-jährige Lebensdauer.
Auf einen Blick: das Luxen S5
Galliumdotierungreduzierte Hot-Spot TemperaturHalf-Cut Zelltechnologiehoher Zellwirkungsgrad von über 20%30 Jahre Leistungsgarantie und 12 Jahre ProduktgarantieHalbzellen-Technologie
Bei der Halbzellen-Technologie ("Half-Cut") werden herkömmliche Silizium-Solarmodul mittels eines Lasers halbiert. Die entstandenen Hälften werden danach zentral parallel geschaltet, was durch die Verringerung von Widerstandsverlusten zu einer erhöhten Leistung des Solarmoduls führt.
Bifaziale Zellen
Bifazial heißt übersetzt zweigesichtig. Und der Name ist Programm: Das Luxen Solar 405W Modul ist auch auf der Rückseite mit Solarzellen ausgestattet, wodurch das Sonnlicht noch besser aufgenommen werden kann und der Wirkungsgrad des Gesamtmoduls steigt.
Gallium gegen lichtinduzierte Degradation
Lichtinduzierte Degradation - das bedeutet, dass Module beim ersten Lichtkontakt etwas an Effizienz verliert. Mit Gallium dotierte Solarzellen wie die von Luxen weisen jedoch auch nach längerer Sonnenbestrahlung noch eine hohe Spannung auf und sind stabiler als etwa mit Bor dotierte Zellen.
Technische Daten
maximale Leistung: 405WModulspannung (Vmp): 37,33Vmax. Strom (Imp): 10,85ALeerlaufspannung (Voc): 44,42VKurzschlussstrom (Isc): 11,82AModulwirkungsgrad: 20,74%Abmessungen: 1722 x 1134 x 30 mmBetriebstemperaturbereich: -40°C bis +85°Cmax. Betriebsspannung: 1500V DCGewicht: 23,5 kg
Lieferumfang:
1x Luxen Solar 405W Mono Bifazial Solarmodul Series 5 Full Black Half Cut (MPN: LNVB-405MD)
€145.15*
€228.60*
Available (more than 10)
TEX2203
tigerexped solar panel 150Wp "black tiger 150", 1315x550 mm
Solar panel with 150 WP and in the edition "Evo" again improved, ultra -high 24.4% cell efficiency.
1315x550 mm, optimized for the highest energy yield in every situation.
larger light spectrum than usable, for solar yield even at dusk
Improved temperature coefficient for less loss of performance in heat - for up to 25% more energy yield!
Highest reliability through full -surface, back -side copper contact layer
NEW: With now three separation diodes for even more power with partial shading
In noble, black anodized aluminum frames (matching, black assembly corners here: Tex4282 and Tex4282-6er)
Variants of 100 to 180 WP available - not too large for less susceptibility to vibration (= greater failure safety!)
Specifications
Bypass diodes: 3Cells per module: 8 × 10Performance tolerance: ± 3 %Nominal peaks: 150 WPMPP voltage: 49.6 VMPP-current: 3.03 aTemperature coefficient performance: -0.27 %/° CTemperature coefficient voltage: -0.236 %/° CTemperature coefficient of electricity: 0.058 %/° CLimits: 58.38 VOCShort circuit current: 3.21 ASCCell technology: Sunpower Maxeon Gen.3Efficiency: 24.4 %Operating temperature: -40 to +85 ° CMaximum system voltage: 600V DCNet weight: 8.08kgGross weight: 9.46kgMotorhome Solar Panel: What you should consider when buying
At the motorhome we have to try to gain as much energy as possible from the smallest area. We do not have the large roof area of a house available here, but the demands on the electrical system (and thus the electricity consumption) in travel vehicles increase. For this reason, solar panels for house roofs (and unfortunately too often also for camper) are not exactly optimal for use at the motorhome.
In order to keep the price low and competitive, technical compromises are made - e.g. (but not only) when selecting the installed solar cells. Calculated on the large area of a house roof, there is also a good amount of usable energy and no special attention is paid to the matter.
It's different with the motorhome. If we want to achieve a certain self -sufficiency with solar power, every solar panel must be uncompromisingly optimized. Efficiency of the cells, temperature coefficient, usable lighting speech ... If you pay attention to all of these factors, this makes a clear difference and sometimes decides whether we can easily load the laptop on the way again or not - not to mention the use of an induction hob completely .
In addition to pure technology, other properties also play a major role in suitability as a motorhome solar panel. This includes, for example, size and shape.
Solar panels are sensitive, the cells can break, which leads to the failure of the performance. For attachment to a vehicle roof with a constant vibration and potholes in the road, one working in the heat and cold and possibly even slight overburdening when building on expedition mobins, an edge length of 2m may become a problem.
In order to be less vibration, a solar panel for the motorhome should rather have shorter edge lengths. Different formats also help with better use of existing roof areas. With Vans, in particular, the standard size panels often do not fit really well in order to be able to use a lot of space. The space next to roof windows or ventilation mushrooms is generally considered lost.
The "Black Tiger" motorhome solar panel was designed to take all these points into account. It combines uncompromisingly optimized technology and is available in 5 special formats for less vibration sophistication and the best umbrella use.
Motorhome solar panel "Black Tiger" - that's why you get more electricity in itExtremely high efficiency
With an efficiency of up to 24.4%, all of our "Black Tiger is currently doing technically possible top performance. We only use TOP of the Range Sunpower Maxeon Gen. III cells.
What does "Top of the Range" mean cells?
It is best to imagine solar cells how a natural product never comes 100% from production. The cells are therefore shot at with light immediately after their production under very specific conditions, rated their performance and divided into quality levels. Only the cells that were able to achieve the highest classification (quality class ultra peak performance) make it into the complete Tigerexped solar range.
In order to achieve the best possible performance in every situation, the "Black Tiger" solar panel has other properties that make it a real high -performance module.
High idle voltage
With a high idle voltage, the time window of electricity production can be larger because the rising and setting sun can be used more.
The advantage of high idle voltage may be significant for the use of a single solar module. More about this somewhat more complicated topic, we explain to you in the article in line or parallel circuit of the solar system- what is better? in our online magazine. Motorhome solar panel with full area (!) Copper layer on the back
In order to achieve a high level of failure, we use a full -surface copper contact layer on the back instead of copper compounds (often also suboptimally installed on the front). That brings two great advantages:
1. Less hidden area on the front and thus higher energy yield in relation to the module size.
2. A significantly higher reliability of the panel
If individual cells of a module are damaged (microrises, possibly also due to branch or hailstorm), this often leads to the total failure of the complete solar panel - the individual, important connections are interrupted, no more damaged cells can no longer produce electricity . The full -surface copper contact layer of the Black Tiger Solar Panele, on the other hand, guarantees the best possible supply of your electrical consumers, even in the case of dead single cells or cell areas.
Improved temperature coefficient - up to 25% more power even in heat
Manufacturer information for the performance of a solar panel relates to an ambient temperature of 25 ° C. The problem: If the temperature increases, the performance falls, because solar panels can work much less effectively in heat. Now imagine how quickly 25 ° C reach or exceeded on the roof of a motorhome ... The power falls per degree of temperature.
The "Black Tiger" motorhome solar panel, as well as the super-flat "Black Tiger SF, hold here with a special optimization. In order to keep the losses through heat small, they are with a high idle voltage and low temperature coefficients (loss of performance per grade Celsius) Equipped. For you, this means: up to 25% more energy yield than with a conventional solar panel in warm temperatures.
Larger, usable light spectrum
Of a solar panel, only a fraction of the incoming light rays (within a certain frequency range) can be used to generate energy. The "Black Tiger" solar panel is able to use a larger frequency range than usual, i.e. a larger light spectrum. This also includes the valuable last rays of sunshine of the twilight, which can still be used to obtain electricity for the electrical devices in the camper.
Control with three separation diodes
The special connection of a black tiger solapanel comprises three separation diodes. This guarantees maximum power for partial shading. Cells in the sun are less impaired by those in the shade.
Solar panels with special dimensions
In order to take into account vibration susceptibility to vibration, overwinding and heat cold extensions on a residentialis roof, we deliberately keep Black Tiger Solar Panele more smaller from the dimensions than is often common. The advantages are a higher failure and possible use of surfaces next to roof windows or the like. With a width of just 42 cm, the "Black Tiger 120" also fits easily next to hatches, ventilation mushrooms or roof boxes. Or choose our almost square special format in the "Black Tiger 180", which fits most van roofs particularly well.
Frame and cover
The "Black Tiger" solar panels are covered by a special glass and placed in an aluminum frame in fine black.
Connect the motorhome solar panel
The connection is made on the back via pre-assembled, two 0.9 m long cables with plugs according to MC4 standard.
For waterproof roof implementation, we recommend either the multi cable through or single (6-10mm) and double, horizontal cable drives (5-6 mm) from Scanstrut.
Solar controller
In order to be able to connect the solar panel to the battery, a solar controller is always required. For the connection between the solar panel and the solar controller, you still need solar flash in the corresponding length, an MC4 plug and an MC4 socket (see our solar installation material category)
We recommend the SmartSolar solar controller from Victron Energy (please select size). If you want to combine several panels, a larger controller is required. You can find out which controller you need as follows:
The values of an MPPT 75/15 mean, for example, a maximum of 75V idle voltage of the panel (VOC) and a maximum of 15a nominal stream. The VOC value is in the data sheet for each panel, the nominal charging current must be calculated.
Computing:
The Black Tiger 100 has a VOC of 37.20V. This is less than 75V and the solar controller with 75V idle voltage is sufficient.In order to calculate the nominal charging current, the nominal power is divided by 12.8V: i.e. 100WP divided by 12.8V results in 7.81a. This is smaller than 10 and therefore the MPPT 75/10 solar controller can be used for our Black Tiger 100.
A detailed explanation for the calculation of the charge controller is also available here in our online magazine, as well as other articles that are sure to be interested in the solar system in the motor home.
Are you unsure about components and dimensioning?
Our technical consultants will be happy to help you. Together we make a need to determine and put together a system professionally and exactly for your threats.
Simply request your non -binding and free advice here.
€351.12*
Available (more than 10)
TEX2204
tigerexped solar panel 115Wp "black tiger 115" 1060x570 mm
Solar panel with 115 WP and ultra -high 24.4% cell efficiency. 1060x570 mm. Optimized on the highest energy yield in every situation. Black Tiger 115 has an optimized idle voltage
larger light spectrum than usable, for solar yield even at dusk
Improved temperature coefficient for less loss of performance in heat - for up to 25% more energy yield!
in special formats for the best roof surface output
Highest reliability through full -surface, back -side copper contact layer
NEW: With now three separation diodes for even more power with partial shading
In noble, black anodized aluminum frames (matching, black assembly corners here: Tex4282 and Tex4282-6er)
Variants of 100 to 180 WP available - not too large for less susceptibility to vibration (= greater failure safety!)
Specifications
Bypass diodes: 3Cells per module: 4 × 8Performance tolerance: ± 3 %Nominal peaks: 115 WPMPP voltage: 26.4 VMPP-Strom: 4.36 aTemperature coefficient performance: -0.27 %/° CTemperature coefficient voltage: -0.236 %/° CTemperature coefficient electricity: 0.050 %/° CLimits: 31.68 VOCShort circuit current: 4.7 ASCCell technology: Sunpower Maxeon Gen.3Efficiency: 24.4 %Operating temperature: -40 to +85 ° CMaximum system voltage: 600VDC
Net weight 7kgDimensions 1060 x 570 x 35 mm
Motorhome Solar Panel: What you should consider when buying
At the motorhome we have to try to gain as much energy as possible from the smallest area. We do not have the large roof area of a house available here, but the demands on the electrical system (and thus the electricity consumption) in travel vehicles increase. For this reason, solar panels for house roofs (and unfortunately too often also for camper) are not exactly optimal for use at the motorhome.
In order to keep the price low and competitive, technical compromises are made - e.g. (but not only) when selecting the installed solar cells. Calculated on the large area of a house roof, there is also a good amount of usable energy and no special attention is paid to the matter.
It's different with the motorhome. If we want to achieve a certain self -sufficiency with solar power, every solar panel must be uncompromisingly optimized. Efficiency of the cells, temperature coefficient, usable lighting speech ... If you pay attention to all of these factors, this makes a clear difference and sometimes decides whether we can easily load the laptop on the way again or not - not to mention the use of an induction hob completely .
In addition to pure technology, other properties also play a major role in suitability as a motorhome solar panel. This includes, for example, size and shape.
Solar panels are sensitive, the cells can break, which leads to the failure of the performance. For attachment to a vehicle roof with a constant vibration and potholes in the road, one working in the heat and cold and possibly even slight overburdening when building on expedition mobins, an edge length of 2m may become a problem.
In order to be less vibration, a solar panel for the motorhome should rather have shorter edge lengths. Different formats also help with better use of existing roof areas. With Vans, in particular, the standard size panels often do not fit really well in order to be able to use a lot of space. The space next to roof windows or ventilation mushrooms is generally considered lost.
The "Black Tiger" motorhome solar panel was designed to take all these points into account. It combines uncompromisingly optimized technology and is available in 5 special formats for less vibration sophistication and the best roof surface use.
Motorhome solar panel "Black Tiger" - that's why you get more electricity in itExtremely high efficiency
With an efficiency of up to 24.4%, all of our "Black Tiger is currently doing technically possible top performance. We only use TOP of the Range Sunpower Maxeon Gen. III cells.
What does "Top of the Range" mean cells?
It is best to imagine solar cells how a natural product never comes 100% from production. The cells are therefore shot at with light immediately after their production under very specific conditions, rated their performance and divided into quality levels. Only the cells that were able to achieve the highest classification (quality class ultra peak performance) make it into the complete Tigerexped solar range.
In order to achieve the best possible performance in every situation, the "Black Tiger" solar panel has other properties that make it a real high -performance module. Motorhome solar panel with full area (!) Copper layer on the back
In order to achieve a high level of failure, we use a full -surface copper contact layer on the back instead of copper compounds (often also suboptimally installed on the front). That brings two great advantages:
1. Less hidden area on the front and thus higher energy yield in relation to the module size.
2. A significantly higher reliability of the panel
If individual cells of a module are damaged (microrises, possibly also due to branch or hailstorm), this often leads to the total failure of the complete solar panel - the individual, important connections are interrupted, no more damaged cells can no longer produce electricity . The full -surface copper contact layer of the Black Tiger Solar Panele, on the other hand, guarantees the best possible supply of your electrical consumers, even in the case of dead single cells or cell areas.
Improved temperature coefficient - up to 25% more power even in heat
Manufacturer information for the performance of a solar panel relates to an ambient temperature of 25 ° C. The problem: If the temperature increases, the performance falls, because solar panels can work much less effectively in heat. Now imagine how quickly 25 ° C reach or exceeded on the roof of a motorhome ... The power falls per degree of temperature.
The "Black Tiger" motorhome solar panel, as well as the super-flat "Black Tiger SF, hold here with a special optimization. In order to keep the losses through heat small, they are with a high idle voltage and low temperature coefficients (loss of performance per grade Celsius) Equipped. For you, this means: up to 25% more energy yield than with a conventional solar panel in warm temperatures.
We have also summarized more information in this article.
Larger, usable light spectrum
Of a solar panel, only a fraction of the incoming light rays (within a certain frequency range) can be used to generate energy. The "Black Tiger" solar panel is able to use a larger frequency range than usual, i.e. a larger light spectrum. This also includes the valuable last rays of sunshine of the twilight, which can still be used to obtain electricity for the electrical devices in the camper.
Control with three separation diodes
The special connection of a black tiger solapanel comprises three separation diodes. This guarantees maximum power for partial shading. Cells in the sun are less impaired by those in the shade.
Solar panels with special dimensions
In order to take into account vibration susceptibility to vibration, overwinding and heat cold extensions on a residentialis roof, we deliberately keep Black Tiger Solar Panele more smaller from the dimensions than is often common. The advantages are a higher failure and possible use of surfaces next to roof windows or the like. With a width of just 42 cm, the "Black Tiger 120" also fits easily next to hatches, ventilation mushrooms or roof boxes. Or choose our almost square special format in the "Black Tiger 180", which fits most van roofs particularly well.
Frame and cover
The "Black Tiger" solar panels are covered by a special glass and placed in an aluminum frame in fine black.
Connect the motorhome solar panel
The connection is made on the back via pre-assembled, two 0.9 m long cables with plugs according to MC4 standard.
For waterproof roof implementation, we recommend either the multi cable through or single (6-10mm) and double, horizontal cable drives (5-6 mm) from Scanstrut.Solar controller
In order to be able to connect the solar panel to the battery, a solar controller is always required. For the connection between the solar panel and the solar controller, you still need solar flash in the corresponding length, an MC4 plug and an MC4 socket (see our solar installation material category)
We recommend the SmartSolar solar controller from Victron Energy (please select size). If you want to combine several panels, a larger controller is required. You can find out which controller you need as follows:
The values of an MPPT 75/15 mean, for example, a maximum of 75V idle voltage of the panel (VOC) and a maximum of 15a nominal stream. The VOC value is in the data sheet for each panel, the nominal charging current must be calculated.
Computing:
The Black Tiger 100 has a VOC of 37.20V. This is less than 75V and the solar controller with 75V idle voltage is sufficient.In order to calculate the nominal charging current, the nominal power is divided by 12.8V: i.e. 100WP divided by 12.8V results in 7.81a. This is smaller than 10 and therefore the MPPT 75/10 solar controller can be used for our Black Tiger 100.
Are you unsure about components and dimensioning?
Our technical consultants will be happy to help you. Together we make a need to determine and put together a system professionally and exactly for your threats.
Simply request your non -binding and free advice by email!
€265.74*
Available (more than 10)
TEX2202
tigerexped solar panel 120Wp "black tiger 120", 1440x420mm
Note: this panel can only be delivered by courier for EUR 99 (in Germany)!
Solar panel with 120 Wp and ultra-high 24.12% cell efficiency. 1440x420mm. Optimized for maximum energy yield in every situation.
Larger light spectrum than usual usable, for solar yield even at dusk
Improved temperature coefficient for less power loss in heat - for up to 25% more energy yield!
in special formats for the best roof surface exploitation
Highest reliability due to full-surface copper contact layer on the back
NEW: Now with three isolating diodes for even more power in partial shading
in an elegant, black anodized aluminum frame (matching, black mounting corners here: TEX4282 and TEX4282-6ER)
Variants from 100 to 180 Wp available - not too big for less susceptibility to vibration (= greater reliability!)
cells per module
3x11
cell technology
Sunpower Maxeon Gen III
quality class
Ultra Peak Performance
Power Tolerance
+- 3%
Max. Power (Pmax)
120 Wp
MPP voltage (V mpp)
36.0V
MPP current (I mpp)
3.33A
Temperature coefficient power
-0.29%/°C
open circuit voltage (Voc)
43.20V
short circuit current (Isc)
3.6A
Cell efficiency
24.12%
Operating temperature range
-40 to +85 °C
Maximum system voltage
600VDC
Dimensions
420 x 1440 x 35 mm
weight
7.6 kg
Technical data specified at STC (standard test conditions) with an ambient temperature of 25 °C, 1000 W/m² irradiance and an AM factor of 1.5.* ) 25% better temperature coefficient than conventional modules, resulting in less loss of performance when heated
€288.05*
Not in stock
3-01-018390
Offgridtec® 130W MONO 12V Solar Panel
Das MONO-130 V2 Solarmodul 20V Black Frame von Offgridtec arbeitet mit monokristallinen Solarzellen mit einem hohen Wirkungsgrad von 22,3%. Es eignet sich dank seiner 20V Betriebsspannung für eine Vielzahl von Anwendungsbereichen. Diese Konstellation sorgt für eine hohe Performance und reduzierte Ertragsverluste durch Spannungsabfälle. Es handelt sich um die neue und verbesserte Version des beliebten MONO 130W Solarmoduls und garantiert dank modernster Fertigung, eine konstant hohe Qualität und Leistung bei maximaler Lebensdauer.
bewährte Qualität direkt von Offgridtec
Rahmen: schwarz
gefertigt nach aktuellsten Normen
monokristalline Solarzellen
positive Leistungstoleranz
extrem widerstandsfähiges ESG-Glas macht das Modul einsetzbar auch bei widrigsten Umweltbedingungen
2 Bypass Dioden - minimierter Leistungsabfall bei Beschattung
3 Busbars
sofort betriebsbereites Solarmodul
Monokristalline ModuleMonokristalline Solarmodule sind eine fortschrittliche Form von Photovoltaik-Modulen, die aus einem einzigen Kristallgitter hergestellt werden. Dieser kristalline Aufbau ermöglicht eine höhere Effizienz bei der Umwandlung von Sonnenlicht in elektrische Energie im Vergleich zu anderen Arten von Solarmodulen. Die monokristallinen Zellen zeichnen sich durch ihre gleichmäßige Struktur aus, die eine effizientere Bewegung der Ladungsträger ermöglicht. Dies führt zu einer besseren Leistungsfähigkeit, insbesondere in Situationen mit begrenztem Platzangebot, da monokristalline Module eine höhere Leistungsdichte aufweisen.
Technische Daten:- Leistung (Pmax): 135W - Arbeitsspannung (Vmp): 20,5 V - Leerlaufspannug (Voc): 24 V - max. Strom (Imp): 6,59 A - Toleranz: +/-3% - NOCT: 45+/2°C - Wirkungsgrad: 22,3% - Kurzschlussstrom (Isc): 6,91 A - max. Systemspannung: 1000 V - zulässige Umgebungstemperatur: -40°C - +85°C - Abmessungen: 1165 x 590 x 35 mm - Gewicht: 7,73kg
Universell einsetzbarOffgridtec's 20V Mono-130 ist universell einsetzbar zum Beispiel in 12 Volt Solaranlagen auf Gartenhäusern, Schrebergärten oder für die Stromversorgung von Beleuchtungs-Applikationen. Aber auch in mobilen Systemen wie bei Wohnmobilsolaranlagen macht dieses Panel eine gute Figur.
Die Anschlusskabel sind 80 cm lang und mit MC4-Steckern bestückt.
Lieferumfang1x Offgridtec® MONO-130 V2 Solarmodul 20V Black Frame
€106.62*
€112.65*
Available (more than 10)
3-01-011025
Offgridtec SPR-120 120W SLIM 12V High-End Solar Panel
Offgridtec Monokristallines 120W / 12V High-End Solarpanel mit rückseitig kontaktierten High-Power-Solarzellen vom amerikanischen Hersteller Sunpower - das aktuell Beste was man verarbeiten kann, mit einem Wirkungsgrad von ca 24%. Hier treffen die weltbesten Solarzellen und das neue Back-Contact Verfahren aufeinander. Das Ergebnis ist ein High-End-Produkt zu einem soliden Preis. Außerdem haben wir bei der Produktion dieser Serie besonders darauf geachtet, dass auch der Rest des Moduls den wertvollen Zellen gerecht wird. Dieses Panel ist deutlich leichter und flächenmäßig kleiner als herkömmliche Solarzellen mit gleicher Leistung. Auch die Lichtausbeute bei schlechteren Bedingungen ist bei der SP Serie höher als bei unserer normalen Mono-Serie.
Wichtige Eigenschaften- Wirkungsgrad von über 24% - leichter und kleiner als andere Mono Module mit gleicher Leistung- Monokristalline High-Power Solarzellen (made in USA)- sehr gute Ausbeute auch bei schlechterem Licht- Rückseiten kontaktiert (Back-Contact Es sind nur die reinen Zellen auf der Fronseite zu sehen)- Schwarzer Aluminium Rahmen (black frame)- äußerst widerstandsfähig- Ideal für Wohnmobile, Boote/Jachten und kleine- vor allem schmale Flächen- Zellanordnung 3 x 11- Edle OptikBei der Produktion der Offgridtec Module werden ausschließlich monokristalliene SunPower Solarzellen der höchsten Qualitätsstufe verarbeitet. Die Zellen werden im Gegensatz zu den herkömmlichen Solarmodulen, auf der Rückseite miteinander verbunden (Back-Contact), was den Zellenwirkungsgrad steigert und für eine edle Optik sorgt.
Das Modul hat einen schwarzen Rahmen aus Aluminium und verfügt über ein speziell gehärtetes ESG-Solarglas.Die Anschlusskabel sind 80cm lang und mit MC4-Steckern bestückt.
Technische DatenLeistung(Pmax): 120WSpannung(Vmp): 20,5VMax. Strom(Imp): 5,87ALeerlaufspannug(Voc): 24,08VKurzschlussstrom(Isc): 6,22AMax. Systemspannung: 600V/DCUmgebungstemp.: -40...+85°CMaße: 415 x 1435 x 35 mm Gewicht: 6,8 kg
€241.17*
Available (more than 10)
TEX2201
Tigerexped Solar Panel 180Wp "Black Tiger 180", 1100x796 mm
Note: This panel can only be delivered by shipping company for 99, -EUR!
Solar panel with ultra -high 24.4% cell efficiency optimized in every situation.
larger light spectrum than usable, for solar yield even at dusk
Improved temperature coefficient for less loss of performance in heat - for up to 25% more energy yield!
In special formats for the best roof surface use
Highest reliability through full -surface, back -side copper contact layer
NEW: With now three separation diodes for even more power with partial shading
In noble, black anodized aluminum frames (matching, black assembly corners here: Tex4282 and Tex4282-6er)
Variants of 100 to 180 WP available - not too large for less susceptibility to vibration (= greater failure safety!)
Solar panel "Black Tiger 180"
Specifications:
Bypass diodes: 3Cells per module: 6 × 24Performance tolerance: ± 5 %Nominal peaks: 180 WPMPP voltage: 44.6 VMPP-current: 4.04 aTemperature coefficient performance: -0.27 %/° CTemperature coefficient voltage: -0.236 %/° CTemperature coefficient of electricity: 0.058 %/° CLimits: 52.54 VOCShort circuit current: 4.28 ASCCell technology: Sunpower Maxeon Gen.3Efficiency: 24.40 %Operating temperature: -40 to +85 ° CMaximum system voltage: 600VDC
Motorhome Solar Panel: What you should consider when buying
At the motorhome we have to try to gain as much energy as possible from the smallest area. We do not have the large roof area of a house available here, but the demands on the electrical system (and thus the electricity consumption) in travel vehicles increase. For this reason, solar panels for house roofs (and unfortunately too often also for camper) are not exactly optimal for use at the motorhome.
In order to keep the price low and competitive, technical compromises are made - e.g. (but not only) when selecting the installed solar cells. Calculated on the large area of a house roof, there is also a good amount of usable energy and no special attention is paid to the matter.
It's different with the motorhome. If we want to achieve a certain self -sufficiency with solar power, every solar panel must be uncompromisingly optimized. Efficiency of the cells, temperature coefficient, usable lighting speech ... If you pay attention to all of these factors, this makes a clear difference and sometimes decides whether we can easily load the laptop on the way again or not - not to mention the use of an induction hob completely .
In addition to pure technology, other properties also play a major role in suitability as a motorhome solar panel. This includes, for example, size and shape.
Solar panels are sensitive, the cells can break, which leads to the failure of the performance. For attachment to a vehicle roof with a constant vibration and potholes in the road, one working in the heat and cold and possibly even slight overburdening when building on expedition mobins, an edge length of 2m may become a problem.
In order to be less vibration, a solar panel for the motorhome should rather have shorter edge lengths. Different formats also help with better use of existing roof areas. With Vans, in particular, the standard size panels often do not fit really well in order to be able to use a lot of space. The space next to roof windows or ventilation mushrooms is generally considered lost.
The "Black Tiger" motorhome solar panel was designed to take all these points into account. It combines uncompromisingly optimized technology and is available in 5 special formats for less vibration sophistication and the best umbrella use.
Motorhome solar panel "Black Tiger" - that's why you get more electricity in itExtremely high efficiency
With an efficiency of up to 24.4%, all of our "Black Tiger is currently doing technically possible top performance. We only use TOP of the Range Sunpower Maxeon Gen. III cells.
What does "Top of the Range" mean cells?
It is best to imagine solar cells how a natural product never comes 100% from production. The cells are therefore shot at with light immediately after their production under very specific conditions, rated their performance and divided into quality levels. Only the cells that were able to achieve the highest classification (quality class ultra peak performance) make it into the complete Tigerexped solar range.
In order to achieve the best possible performance in every situation, the "Black Tiger" solar panel has other properties that make it a real high -performance module. Motorhome solar panel with full area (!) Copper layer on the back
In order to achieve a high level of failure, we use a full -surface copper contact layer on the back instead of copper compounds (often also suboptimally installed on the front). That brings two great advantages:
1. Less hidden area on the front and thus higher energy yield in relation to the module size.
2. A significantly higher reliability of the panel
If individual cells of a module are damaged (microrises, possibly also due to branch or hailstorm), this often leads to the total failure of the complete solar panel - the individual, important connections are interrupted, no more damaged cells can no longer produce electricity . The full -surface copper contact layer of the Black Tiger Solar Panele, on the other hand, guarantees the best possible supply of your electrical consumers, even in the case of dead single cells or cell areas.
Improved temperature coefficient - up to 25% more power even in heat
Manufacturer information for the performance of a solar panel relates to an ambient temperature of 25 ° C. The problem: If the temperature increases, the performance falls, because solar panels can work much less effectively in heat. Now imagine how quickly 25 ° C reach or exceeded on the roof of a motorhome ... The power falls per degree of temperature.
The "Black Tiger" motorhome solar panel, as well as the super-flat "Black Tiger SF, hold here with a special optimization. In order to keep the losses through heat small, they are with a high idle voltage and low temperature coefficients (loss of performance per grade Celsius) Equipped. For you, this means: up to 25% more energy yield than with a conventional solar panel in warm temperatures.
We have also summarized more information in this article.
Larger, usable light spectrum
Of a solar panel, only a fraction of the incoming light rays (within a certain frequency range) can be used to generate energy. The "Black Tiger" solar panel is able to use a larger frequency range than usual, i.e. a larger light spectrum. This also includes the valuable last rays of sunshine of the twilight, which can still be used to obtain electricity for the electrical devices in the camper.
Control with three separation diodes
The special connection of a black tiger solapanel comprises three separation diodes. This guarantees maximum power for partial shading. Cells in the sun are less impaired by those in the shade.
Solar panels with special dimensions
In order to take into account vibration susceptibility to vibration, overwinding and heat cold extensions on a residentialis roof, we deliberately keep Black Tiger Solar Panele more smaller from the dimensions than is often common. The advantages are a higher failure and possible use of surfaces next to roof windows or the like. With a width of just 42 cm, the "Black Tiger 120" also fits easily next to hatches, ventilation mushrooms or roof boxes. Or choose our almost square special format in the "Black Tiger 180", which fits most van roofs particularly well.
Frame and cover
The "Black Tiger" solar panels are covered by a special glass and placed in an aluminum frame in fine black.
Connect the motorhome solar panel
The connection is made on the back via pre-assembled, two 0.9 m long cables with plugs according to MC4 standard.
For waterproof roof implementation, we recommend either the multi cable through or single (6-10mm) and double, horizontal cable drives (5-6 mm) from Scanstrut.
Solar controller
In order to be able to connect the solar panel to the battery, a solar controller is always required. For the connection between the solar panel and the solar controller, you still need solar flash in the corresponding length, an MC4 plug and an MC4 socket (see our solar installation material category)
We recommend the SmartSolar solar controller from Victron Energy (please select size). If you want to combine several panels, a larger controller is required. You can find out which controller you need as follows:
The values of an MPPT 75/15 mean, for example, a maximum of 75V idle voltage of the panel (VOC) and a maximum of 15a nominal stream. The VOC value is in the data sheet for each panel, the nominal charging current must be calculated.
Computing:
The Black Tiger 100 has a VOC of 37.20V. This is less than 75V and the solar controller with 75V idle voltage is sufficient.In order to calculate the nominal charging current, the nominal power is divided by 12.8V: i.e. 100WP divided by 12.8V results in 7.81a. This is smaller than 10 and therefore the MPPT 75/10 solar controller can be used for our Black Tiger 100.
Are you unsure about components and dimensioning?
Our technical consultants will be happy to help you. Together we make a need to determine and put together a system professionally and exactly for your threats.
€405.12*