Google Reviews
€74.41*
% €90.90* (18.14% saved)€62.53*
% €90.90* (31.21% saved)Availability: immediately available
Delivery time: 1-3 working days
The solar data extender summarizes the data of up to three solar regulators so that they can be displayed on a single display. The usual LCD display can still be used. It is compatible with the following devices:
- Solar loader in SR and MPP technology (from series no. 14Vxx.xxxxx)
- Battery Charger of Type VBCS Triple
- LCD solar computer S (from series no. 15V40.xxxxx)
- LCD Charge Control S
- VPC series with solar function
- Bluetooth Connector S-BC
Assembly and connection
The solar data extender can be installed at any time. It has three independent inputs (IN1, IN2, IN3). The signals are summarized by the output (out). A solar display (e.g. LCD solar computer S) can be connected there.
It is stuck using the modular cable in the scope of delivery between Votronic Solar loader and the solar display (e.g. LCD solar computer S). The connection in1 must always be connected, since the voltage supply for the device takes place via this.
Also available in boats with the electronics protected from moisture!?
Technical specifications
| Nominal voltage (supply via connected devices) | 12 and 24 |
| Operating voltage area [V] | 8 - 32 |
| Electricity intake in standby, typical [MA] | 0,7 |
| Electricity with activity, typical [MA} | 10 |
| Dimensions (WXHXT) in [mm] | 75 x 47 x 24 |
| Weight in [g] | 37 |
| Test mark | CE, e-test (EMV/car directive) |
| Environmental conditions, humidity: | Max. 95% room moisture, not condensing |
| Scope of delivery: | 3 St. control line 6-pin 0.5 m long, operating instructions |
Login