Sie können diesen Artikel auch in unserem neuen Shop www.frenchman-energy.de nach dem neuen § 12 Abs. 3 UstG beziehen, wenn Sie dafür berechtigt sind.
theMultiplus 24/3,000/70-50 from Victron Energy
comprehensive and flexible can be used
Since he also has a lightning -fast 50a transfer switch in addition to inverning people and charger, it is an ideal inverter for the areas of motorhome, boat or yacht and the network -coupled area of the uninterrupted power supply in the case of network fluctuations or power failures. Also for use in network -coupled self -consumption systems that only draw electricity from the supplier if the battery current is no longer sufficient or as a UPS solution in which the multiplus stipulate when the electricity suddenly fails from the network operator and thus ensure an uninterrupted power supply.
Essential performance features
- 2400W continuous output and 6000W peak output, for 24V battery voltage
- Device combination made of inverter with transfer switch and 70a battery charger
- delivers the purest 230V sine voltage and a clean 50Hz frequency
- Ve.Bus communication sport ensures extensive possibilities of networking, system integration, configuration and control of the multiplus devices from Victron.
-Support the three-phase operation (3 equal units of the same model required)
- Multiplus devices are parallel -circuitable, up to 6 devices can be connected in parallel and the system performance can therefore be significantly increased if necessary
- 2 AC exits from MultiPlus 3000 and larger. For example, devices that should only run can be connected to the second output if network current is available
- From the Multiplus 3000 a COM port in addition to the VE.Bus port, so that there are no longer any limits to the system integration
- PowerControl function enables working with limited generator performance as well as limited land or network electricity
- Power assist function enables “increase in performance” by generators and land connection support in the event of
- can be used as a UPS solution for uninterruptible power supply, thanks to the integrated transfer switch with 50a
- For network -coupled self -consumption systems, that can only be used by the network operator if the battery capacity is no longer sufficient or other programmable events have taken place
- Compatible with numerous Victron tax and display panels
- Three phase operation with identical multiplus versoniators possible
solid performance expansion possible
Apart from the parallel connection, three units of the same model can also be configured for a three-phase output. However, this is not enough: up to six sets with three units can be switched in parallel to achieve a huge 75 kW / 90 kva inverter and over 2,000 A charging capacity (calculated with the 5000 version)
PowerControl
Power assist
Backup system
The Multiplus can be used in both non-linked and network-coupled PV systems as well as with other alternative energy systems. Software is available for recognizing a network failure.
If settings have to be changed to a single device, this can be done within a few minutes using a DIP switch setting process.
Victron Ethernet Remote, Victron Global Remote and the Color Control Panel enable remote maintenance and remote monitoring of the Multiplus. In addition, the system data can be saved and viewed free of charge on the VRM (Victron Remote Management) website.
Configuration from a distance
If systems are connected to the Ethernet with a color control panel, you can be accessed and settings can be changed from a distance.