Numerous functions for battery monitoring and generously dimensioned electronics components on the Smart BMV board allow you insight into the life of your battery. In addition, with the help of the BMV, you can recognize and fix problems with the help of the BMV, even in larger batteries before damage.
- Programmable visual and acoustic alarm
- Programmable relays to switch off the insignificant loads or switch on a generator if necessary.
-A 500 amper rapid connection shunt and a connection set.
- Shunt capacity of up to 10,000 amps can be selected
- Ve.direct Communication connection, which can transmit a wide range of course data in order to be able to evaluate usage patterns and battery status
- Additional input for measuring the voltage of a second battery, temperature or center voltage as well as associated alarm and relay settings
- High -resolution measurement data of up to 2 batteries
- Monitoring of the center
A damaged cell or a damaged battery can destroy a whole battery. If batteries are switched into series, a timely warning message can be created by measuring the center voltage.
-The power consumption of the BMV is only 0.7 AH per month (1 ma) at 12 V and 0.6 AH per month (0.8 MA) at 24 V. In particular, lithium-ion batteries have almost no capacity, if you are discharged until switching off due to low voltage.
After switching off due to low voltage, the capacity reserve of a lithium-ion battery is around 1 AH per 1000 AH battery capacity. The battery is damaged when the remaining reserve capacity is removed from the battery. A residual current of 10 mA, for example, can damage a 200 AH battery if the system is left in the unloaded state for over 8 days.
- Integrated Bluetooth: Networking, evaluation and configuration have never been as comfortable as today
- Free app VictronConnect: The VictronConnect App enables you to evaluate all Victron products with VE.Direct interface. Depending on the device, numerous parameters can be evaluated directly via the cell phone, computer or tablet. There are also opportunities for datalogging and data export.
Wide input voltage area: 6.5 - 70V
High current measuring resolution 10 MA (0.01 a)
Electricity ± 0.01a
Voltage ± 0.01 V
Amperer hour ± 0.1 Ah
Charging status (0 - 100%) ± 0.1%
Remaining term ± 1 min
Temperature (0 - 50 ° C or 30 - 120 ° F) ± 1 ° C/° F
Accuracy of the current measurement ± 0.4%
Simplest installation:
All electrical connections are carried out with the circuit board connector on the Strom-Shunt. The shunt is connected to the guard via a standard RJ12 telephone cable.
