Offgridtec backup kit Pytes V5a battery - Victron MultiPlus II 48/3000 inverter 1-phase,

SKU: 4-01-019515
GTIN: 8719076047582
Manufacturers: Offgridtec

Due to the holidays and the subsequent inventory, there may be delays in delivery times. Parcel deliveries will be made until December 23 and between the holidays, while freight deliveries will be possible in isolated cases until December 23 and again from January 7, 2026. We apologize for any inconvenience and thank you for your understanding.

Speicherkapazität
Stromzähler

from

1.802,00 €

incl. 0% VAT , Shipping costs for orders according to (DE) §12 para. 3 UStG

Choose tax zone / country of delivery

0% VAT for photovoltaics (Section 12 (3) UStG). For further information, please see und here

Available immediately
Shipping in 2-5 business days, by freight forwarder (DE - int. shipments may differ)

Arrange a consultation now

OR ORDER DIRECTLY

This item has variations. Please select the requested variation.

Offgridtec backup kit 5.12 or 10.24kWh Pytes V5a battery - Victron MultiPlus II 48/3000 inverter 1-phase, with or without power meter

The 1-phase backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems include lithium-ion batteries from Pytes, the matching MultiPlus-II inverters and a Cerbo GX MK2 from Victron Energyfor system monitoring. This allows you to secure your energy supply even in the event of a power failure.

With the Pytes batteries, you have a storage capacity of 5.12kWh to 10.24kWh to use your energy efficiently and remain self-sufficient for longer if required. Thanks to the UPS function, the MultiPlus remains switched on even in the event of a mains fault and takes over the supply to the connected consumers. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices can be guaranteed.

Field of application:
Emergency power supply
Off-grid solar systems (stand-alone systems)
Repowering existing PV systems
Grid-connected power supply
UPS systems

Parts list:
Pytes V5a LiFePO4 battery 5.12kWh 51,2V 100Ah (depending on selection 1x or 2x)
1x Victron MultiPlus-II 48/3000/35-32 230V
1x Victron Lynx Distributor (M8)
1x Victron Cerbo GX MK2 Communication Center Systemümonitoring
1x Victron GX Touch 50 display panel für Cerbo GX
1x 3m Victron RJ45 UTP cable
1x Offgridtec® 1m battery cable 35mm² on both sides M8 Ösen
1x Offgridtec 5-piece set MEGA fuse 125A 70V für 48V systems
1x Pytes data cable battery to Victron GX 3,5m
Pytes battery connection cable set V5a 2m M10 50mm² to Amphenol 10mm (1x or 2x depending on selection)

The Multiplus device combination is preconfigured to fit the Pytes batteries.

When selecting power meters
1x Victron VM-3P75CT Energy Meter

1x Victron 5m RJ45 UTP cable

Extended use of your backup system
The backup kit is supplied either with or without Victron power meters and cables, whereby a power meter is absolutely necessary for setting up an energy storage system.

With this energy meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for single-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.

In order for an ESS to be taken into account in the pre-configuration, the meter must be purchased in advance or for the system!

The storage solution - Pytes V5a
The V5 alpha battery module from Pytes is equipped with the latest LiFePO4 cell technology and offers you a very long service life with high cycle stability. With a nominal voltage of 51.2V and a capacity of 5.12kWh, the battery provides you with outstanding performance under high loads. They are very easy to install and can be expanded up to 430kWh. In addition to these advantages, the home storage systems have intelligent monitoring and control functions that allow you to make optimum use of your energy consumption and display it in real time.

Technical data:
Battery chemistry: LiFePO4
Nominal voltage: 51.2 V
Voltage range: 44.8 - 57.6 V
Mains capacity: 100 Ah
Nominal energy: 5.12 kWh
Recommended charge/discharge current: 75 A
Max. continuous charge/discharge current: 100 A
Peak charge/discharge: 150 A (15 sec.)
Operating temperature range: -10°C - +55°C
Heating system: 8-10°C/h
Weight: 44 kg
Dimensions: 440 x 530 x 140 mm

The electronic core - the Victron Multiplus-II device combination
The Multiplus-II is a high-end device combination from ;combination from Victron Energy, consisting of a 48V battery charger, inverter and transfer switch. This combination combines the classic Multiplus components with an external current sensor and integrated anti-island function. This expands the PowerControl and PowerAssist functions to 50A and extends the potential range of use to energy storage system applications. The Multiplus is therefore ideal for use as a backup device in grid-connected and off-grid systems for the power supply.

3000W power with non-linear load
2400W continuous load - 6000W peak power
for 48V battery voltage
32A transfer switch
35A battery charger
Output voltage: 230 VAC, frequency: 50 Hz
max. efficiency: 95%
Protection class: IP22

System monitoring with the Victron Cerbo GX MK2 and GX Touch Display
With the Cerbo GX MK2 communication center, you can easily control and monitor your system. The flexible connection options maximize your system performance. Thanks to the Cerbo GX, you can control your system from anywhere. With the GX Touch 50 display, you always have an overview of all your system parameters and can make changes quickly and easily.

Safety note: Only have this complete system installed and commissioned by a qualified electrician.

Shipping weight:

39,00 kg

Manufacturer
Name: Offgridtec
Street: Im Gewerbepark 11
ZIP-Code, City: 84307 Eggenfelden
Email: info@offgridtec.com

There are no reviews yet.