The Lifepo4 25.6V 100Ah Smart Battery from Victron Energy (MPN BAT524110610) is a Lifepo4 battery of the latest generation. At full load, the LIFEPO4 saves 25.6/100 smart a whopping 2560Wh of electricity, with a very low self -discharge and outstanding lifespan. The Victron family's LIFEPO4 battery already has an integrated cell compensation and a BMS (battery management system) cut. The integrated Bluetooth to connect to the Li-Ion app round off the overall package.
Properties Lifepo4 25.6V 100Ah Smart Battery
- Nominal voltage: 25.6V
- Integrated Bluetooth for connecting to the Victron Li-ion app
- Name energy at 25 ° C: 2560Wh
- Nominal capacity at 25 ° C / 0 ° C / -20 ° C: 100AH / 80AH / 50AH
- Cycles with a depth of discharge 80% / 70% / 50%: 2500/3000/5000
- Max. Continuous discharge flow: 200a
- Recommended continuous discharge current: <100a
- Weight: 28 kg
- Dimensions: 197 x 650 x 163 mm
Efficient, economical ...: LIFEPO4 25.6V 100Ah Smart Battery
Lifepo4 batteries are expensive compared to AGM or gel batteries, but in most cases the higher acquisition costs will be more than calculated. With a lifespan of up to 5000 cycles, they also exceed the maximum lifespan of the best lead-acid batteries. In addition, the LFP 25.6/100 scores with 70%in terms of space saving and weight savings. At 92%, the degree of energy is also significantly above the 80% of lead-acid batteries, which can be of essential importance, especially in offgrid systems, especially in the case of network-independent solar and/or wind turbines.
MultiTalent: infinitely flexible with lithium technology from Victron Energy
Lifepo4 Smart batteries from Victron can be implemented in almost all common applications. This technology has been playing an important role in the mobile area for a long time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and an irregular charging, they cannot harm them, they also make their way into land applications and can now be found in almost all system classes.
Parallel and series circuit up to max. 1000AH at 48V
Thanks to the integrated cell compensation and cell monitoring function, you can conveniently switch up to 10 batteries of this type in parallel and up to 4 10 blocks in series which results in a maximum of 1000AH at 48V.
Integrated Bluetooth for smart handling
Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful to recognize a (possible) problem like a cell light weight in good time.
Important NOTE: The use of an additional BMS is imperative to interrupt or switch off if the voltage of a battery cell drops below 2.5V or to stop the charging process if the voltage of a battery cell increases to over 4.2V and the system Switch off when the temperature of the cell exceeds 50 ° C.
To do this, you have the choice between the BMS 12/200 and the VE.Bus BMS - more details of the devices, please refer to the respective article descriptions
Scope of delivery:
1x Victron Energy BAT524110610 25.6V 100Ah Smart Battery
1x operating instructions
data sheet
|
Storage capacity (AH)
|
100Ah
|
|
Batterieladestrom max.
|
200a
|
|
Battery cycles
|
2500 cycles
|
|
Battery tension
|
25.6V
|
|
EAN
|
8719076054627
|
|
Manufacturer part number
|
Bat524110610
|
|
Weight
|
28 kg
|
|
Dimensions (LXBXH)
|
197 x 650 x 163 mm
|
|
Ambient temperature
|
-45 ° C - +70 ° C
|
|
IP protection
|
IP22
|
|
Battery management BMS
|
Integrated battery management system with cell compensation
|
|
Battery chemistry
|
Lithium iron phosphate
|
|
Name energy
|
2.56 kWh
|
|
Impact
|
Yes, max 10 pieces
|
|
Series circuit
|
Yes, Max 4 in series
|
|
guarantee
|
2 years
|
|
humidity
|
Max. 95 %, not condensing
|
|
Manufacturer
|
Victron Energy
|
