Victron Blue Smart IP65s Charger 12/4 + DC connector

SKU: BPC120433064R
GTIN: 8719076044611
Manufacturers: Victron

57,54 €

incl. 0% VAT , Shipping costs for orders according to (DE) §12 para. 3 UStG

(Save 40.31%, i.e. 38,85 €)

Choose tax zone / country of delivery

0% VAT for photovoltaics (Section 12 (3) UStG). For further information, please see und here

Available immediately
Delivery in 1-3 business days (DE - int. shipments may differ)

Arrange a consultation now

OR ORDER DIRECTLY

Victron Blue Smart IP65s Charger 12/4(1) 230V CEE + DC connector

Ultra-high efficiency "green" battery charger
With an efficiency of up to 95%, these chargers generate three to four times less heat than the industry standard. And, once the battery is fully charged, power consumption is reduced to 0.5 watts, which is five to ten times better than the industry standard.

Durable, safe and quiet
- Low heat load on electronic components
- Protected against the ingress of dust, water and chemicals.
- Protection against overheating: The output current is reduced if the temperature rises up to 60 °C,
however, the charger does not fail.
- The chargers are absolutely noiseless: no fan or other moving parts

Reconditioning
A lead-acid battery that has not been sufficiently charged or has been left in a discharged state for days or weeks will deteriorate in performance due to sulphation. If the process is stopped in time, the sulphation can be partially reversed by charging the battery at a low current until a higher voltage is reached.

Function for restoring fully discharged batteries
Most chargers with reverse polarity protection do not recognize a battery that has been discharged to zero volts or almost zero volts and therefore do not recharge it. However, the Blue Smart IP65 charger will attempt to recharge a fully discharged battery with low current and will resume normal charging once sufficient voltage has been built up across the battery terminals.

The VictronConnect App
Sets, displays and configures your Blue Smart IP65 charger using your smartphone. With the VictronConnect app, you can view the status of your charger and battery and even control the functions of your charger. By default, the voltage and current are displayed on the screen.

Storage mode: less corrosion on the positive plates
Even the lower voltage of the float charge phase that follows the constant voltage phase leads to grid corrosion. It is therefore of great importance to reduce the charging voltage even further, even if the battery remains connected to the charger for longer than 48 hours.

Charging with temperature equalization
The optimum charging voltage of a lead-acid battery varies inversely to the temperature. The Blue Smart IP65 charger measures the ambient temperature during the test phase and equalizes the temperature during the charging process. The temperature is measured again when the charger is in low current mode, in the charge maintenance voltage phase or in storage mode. Therefore, no special settings are required for a cold or hot environment.

Li-ion battery mode
The Blue Smart IP65 charger uses a specific charging algorithm for lithium-ion (LiFePO4) batteries, with an automatic function to reset the lithium-ion undervoltage protection.

45x81x182
0.6kg

Shipping weight:

1,00 kg
Item weight:

0,60 kg