Flexible and accessible solar modules from Sunbeam system from Sweden
The Swedish solar specialist Sunbeam system develops solar modules according to the latest technology and with a wide range of circles (on board, on the caravan, etc.). All Sunbeam system modules are extremely thin, flexible and accessible. Thanks to the outstanding energy yield, they are perfect for self -sufficient energy generation on the go.
Sunbeam system Tough + is the absolutely latest solar module technology. They impress with an outstanding performance per unit of surface and extreme durability:
- Again +13% power ggü. Tough modules
- Flush 2.0 cable (still flatter)
- Walk -in, non -slip surface
- easy installation
- 5 year guarantee
The outstanding performance levy is safely monitored by Sunbeam system's' partner Sunpower. The cells in a tough + panel have an impressive efficiency of an average of 23.7% cell efficiency. This allows an approximately 13% higher performance of the tough + modules compared to comparable modules or the tough modules.
Sunbeam system carbon quick fix
With the new carbon fiber model, Sunbeam system offers a resistant solar panel that can be attached very quickly and easily on an existing Sprayhood/Bimini. The fabric of a bimini is not stable and stiff enough to carry a normal flexible solar panel over 54W or to fix them sufficiently. In the event of stronger winds, the solar panel could be damaged because it turned too much and the smallest cracks could arise. The integrated carbon fiber stiffening in the new Carbon Quick Fix Fixes this problem and enables the use of large solar modules on a top. The ratio of strength to the weight of carbon fibers is crucial here.
The Quick Fix system with the LOXX buttons enables easy assembly on fabrics or other surfaces. So that you can easily remove the solar panel and attach it again.
Modern design
The black surface with transparent edges not only looks chic, but also fits the color of all colored biminis. The edges are soft so that the solar panel is better on the fabric.
High quality cells from SunPower ™
The Carbon Quick Fix builds on the Tough + series and was also reinforced with carbon fiber. The same high -quality cells from SunPower ™ were used as in the Tough+ series. The efficiency is approximately 23.7%.
Shadow Optimized - Improved partial shading performance
A partial shading of the solar panel happens more often than you think. Due to the "Shadow Optimzed" technology, there is a lower drop in performance in the case of partial shading.
Robust, durable surface - UV-resistant
The Carbon Quick Fix is equipped with the same high-quality materials, which were previously developed by Sunbeam system for the original tough series. The innovative robust surface offers a very long service life. The anti -slip profile captures more light in low sun angles. In addition, the dirt -repellent properties also improve daily production by helping to keep the panels clean when rain.
By using high -quality materials, Sunbeam system grants a 5 -year guarantee.
Carbon fiber Velcro strip
We recommend the special carbon fiber Velcro strip to use the carbon model in strong winds or on fast-moving ships. These compensate for the forces on the canvas below with the help of Velcro tapes.
Technical specifications
|
Article designation |
Tough+ Carbon 116W Quick Fix |
|
Article no. |
1970705 |
|
Dimensions |
1078 x 554 mm |
|
Weight |
2.8 kg |
|
Pmax - max. Performance |
116 W |
|
VOC - Voltage Open Circuit |
23.07 V |
|
LSC - short circuit current |
6.15 a |
|
VMP - Max. System voltage |
19.87 V |
|
IMP - Max. Electricity |
5.84 a |
|
Ptol - performance tolerance |
+/- 3% |
|
Solar cells |
Sunpower 23.70% |
|
Max Sys Voltage (including by-pass diode) |
45V (80V) |
|
Cable length |
2 0.8 m |
|
High shadow tolerance |
Yes |
|
Fastener |
Loxx buttons |
Note: Always pay attention to the permissible max. System voltage of the solar panel when switching
