100W motorhome complete set: simple, proven, high quality
The set contains all the components you need to charge your batteries on the go. The special thing about our solar systems for mobile homes: We use an extra solid mounting system that can be easily glued on. The module can be unscrewed from the spoiler at any time, should you ever need to access the area under the solar module. This set is designed so that it can be expanded with another module in the same performance class.
We also paid special attention to quality at the critical point, the cable duct into the interior of the mobile home. The supplied cable bushing is made from the same stable material as the roof spoiler for the solar modules and is simply glued on. The connection is completely waterproof and will last for many, many years.
Key performance characteristics
- As the only manufacturer, we offer you a complete motorhome solar system, in which all components are supplied from our own production - of course, as usual, in the highest Offgridtec quality
- The premium mobile system class is probably the best-selling mobile home solar system on the market and has already been successfully installed thousands of times. In addition, the premium mobile series was established on the market more than 5 years ago and has been continuously improved on the basis of customer experiences and constantly supplemented with technical innovations.
-
As a customer, you benefit from a product that is highly sophisticated and reliable and at
Components of the Offgridtec 100W Premium L 12V
- 1x Offgridtec PWM-Pro 12/24-20 - 12V PWM solar charge controller with LCD display, load output, USB and much more.
- 1x Offgridtec 100W 12V - monocrystalline solar module
- 1x Offgridtec single cable bushing - white with waterproof PEG screw connection
- 1x Offgridtec 55cm mounting roof spoiler set (1 pair) - for attaching the solar modules
- 1x Offgridtec 8m 2x6mm H07RNF - connecting cable solar module to solar charge controller in camper design
- 1x Offgridtec 1.5m 2x6mm 30A battery connection cable - connection cable solar charge controller to battery
- 1x Offgridtec battery pole clamps (1 pair)
- 1x assembly adhesive set with instructions and necessary accessories for pretreatment
- competent help included if needed!
The Offgridtec PWM-PRO solar charge controller
The Offgridtec PWM-Pro charge controller series offers a large, comfortable LCD display and works with the latest charging technologies. A large display informs the user with the help of symbols all operating states. The state of charge is shown visually in the manner of a fuel gauge. data, such as B. voltage, current and state of charge, can also be shown digitally as a number on the display. The controller also has a KWh counter that the user can reset himself. A controllable load output and 2 USB 5V outputs are also integrated in the controller and supply your 12V and 5V DC consumers with power. For the full range of functions, please refer to the charge controller documentation
The Offgridtec 100W 12V solar module
In the production of our modules, only monocrystalline solar cells of the highest quality are processed. The module has a frame made of anodized aluminum and has a specially hardened ESG solar glass, which makes it particularly resistant to external influences (weathering, etc.).
The expected daily output (April to October): an average of 400Wh/day (max. 850 Wh on sunny days in Germany)
Dimensions solar module: 1030 x 520 x 35 mm (HxWxD).
Professional solar mounting system
Spoiler profiles are the first choice, especially for caravans and motorhomes, when it comes to neatly attaching the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Thanks to the closed design of the spoilers, no branches or the like can get caught under the solar modules.
Spoiler dimensions: L x W x H: 54.5cm x 8.9cm (of which approx. 3cm contact surface module per spoiler) x 6.5cm.
The bonding
A correctly executed bond is superior to any screw connection in tough motor home or boat use. A strength of more than 4 N/mm2 can be achieved on painted or GRP surfaces. Calculated on the adhesive surface, this would be a value that would never be achievable with a screw connection in the thin aluminum or GRP carrier layer. This adhesive set enables even a layman to create an absolutely solid connection between spoilers and the respective surface.
Components of the solar mounting system
The ABS mounting profiles
Cable ducts from the roof to the interior are always quite tricky, because it has to be ensured that everything is absolutely tight even after years and stays tight
Because even the smallest ingress of water can often lead to irreparable damage to the interior insulation and furnishings. Especially since the moisture is often not noticed until it is quite late. For this reason, the roof ducts were developed: The housings are made of the same UV and weather-resistant material as the mounting brackets offered in the online shop. They are extremely stable and absolutely sure-footed. The wide adhesive edge ensures an optimal seal. The bushings are glued with the adhesive set that you also use to glue the solar mounting brackets. The housings can also be painted as desired and thus adapted to the surface on which they are to be attached
- 1 pair of Offgridtec 55cm ABS mounting profiles
- suitable stainless steel screws to attach the module to the profiles
- 1x Offgridtec ABS cable roof bushing for leading the solar cable from the vehicle roof into the interior
The professional cabling set
All necessary cables are already pre-crimped with specialist tools. So you don't need to buy any special pliers for the MC-4 connectors. The cable has a length of 8m and houses 2 wires 6mm²
Components of the wiring set
- 1x Offgridtec 8m 2x6mm H07RN-F connection cable solar module to solar charge controller complete with appropriately equipped cable ends
- 1x Offgridtec 1.5m 2x6mm battery connection cable with flat fuse holder, matching ATO fuse and a pair of pole terminals. The cable fits M8 screw terminals or batteries with round poles.
individual system adaptation possible on request
If you want a different charge controller from our range, for example to charge board and service batteries together via solar, or if you want the cables to have a different length , you are welcome to contact us at any time. The color of the spoilers can also be changed from white to black. Simply send a request for a quote with the article number and change request to our customer service
Scope of delivery:
1x Offgridtec 4-01-002710 Premium-L 100W 12V mobile home solar system with all the above components
1x operating instructions
