The offgridtec® MobileBlack series impresses with an appealing optical design in fine black and with its extremely convincing performance parameters. Starting with the OLP solar modules in the latest shingle construction and an outstanding cell efficiency of over 21%, up to the offgridtec® MPPT Pro dualladel, one can really speak of a successful selection and product composition from offgridtec.
200W Mobilbar Caravan Complete System
This complete system contains everything you need to charge your batteries mobile. In addition to charging your on -board battery, the dual controller contained in the set also enables the simultaneous loading of the starter battery because it has a corresponding side charging output. The scope of delivery includes extensive information material in which the structure and connection is explained step by step - this applies to both the technical connection, as well as the gluing of the holding spoilers and the roof implementation. The same roof implementation is probably one of the most critical areas, since the transition to the interior of the motorhome takes place. The implementation is made of the same material as the spoiler - the PEG screw connection corresponds to the protection class IP68 and is therefore absolutely waterproof if installed correctly.
Scope of delivery of the MobileBlack 200W Caravan solar system
- 2x offgridtec® OLP SolarModul 100W 12W Perc with shingle technology
- 1x offgridtec ABS cable passage 1-fold-black with waterproof PEG screw connection
- 2x offgridtec 55cm ABS assembly profiles (1 pair) - for attaching the solar modules in black
- 1x offgridtec 8m 2x6mm H07RNF - connecting cable solar module to solar loader control in caravan version
- 1x offgridtec 1.5m 2x6mm 30A battery connection cable - connecting cable solar loader controller to battery with battery pole terminals and M8 cable shoe connection
- 1x offgridtec® 30A MPPT Dual Solar loader with an side charging and AES switching exit
- 1x remote display / display for MPPT Pro Duo Delicacies
- 1x decalin adhesive set with decasyl MS-5 polymer adhesive, decavator adhesive mediator, cleaning cloth and operating instructions
- 1x single cartridge decasyl MS-5 glue from Dekalin
- 1x branch sockets for the parallel circuit of the solar modules
- 2x MC-4 extension cable 50cm to connect the connection cable on the module with the junction bushes
The offgridtec® Mppt Pro Duo 30a solar loader control
The MPPT per duore control can process a maximum charging current of 30A. This means that this system can theoretically be expanded to almost 400W solar module performance. In addition, the device has a secondary charging output which the starter battery can be loaded in parallel to the on -board battery during long periods - a feature that is certainly highly valued in the mobile home. So that the optimum can really be spoken of in terms of efficiency, the device still has an AES switching output- it enables the automatic switching of refrigerators with "AES" from gas to 12V operation with excess solar power.
- Maximum charging current 30A - 390W module performance theoretically usable
- 30a load exit for 12V consumers directly at the loader
- The clear distance display enables the controller to assemble at difficult to access in the vehicle without being restricted and overview of the system parameters
- AES tax signal for car refrigerator to avoid waste of energy
- 100V maximum PV input voltage
- Digital circuit control of the adaptive three -stage loading mode to improve the battery life duration
- Max Power-Point Tracking Technology with ultra-fast tracking speed and guaranteed tracking efficiency of at least 99.5%
- Dimensions: 24.7cm x 16.5 cm x 6.9cm (LXBXH)
- Weight: 1.4kg
- Self -consumption: 26mA at 12V
- Active temperature compensation for optimal charge and guarantee of a high battery life
- Support of all important battery types (lyric acid, AGM, gel, lifepo4)
- Max. Effect: 98%
- controllable via bluetooth (separate dongle Art.No. 8-01-011271 required)-only for Android devices
The 100W OLP solar module with the latest shingle technology
The 100W OLP Solar module with PERC technology used in the system impresses on the one hand with its unique modulus design with overlapping wafer arrangement (overlapping design), as well as the high module efficiency, which makes this module particularly interesting for applications on vehicles on vehicles because of the limited space.
- Module voltage (VMP): 18.7V
- Max. Electricity (IMP): 5.35a
- Idle voltage (VOC): 22.1V
- Short circuit current (ISC): 5.67A
- Cell efficiency: 21.24%
- Ambient temperature: -40 ° C - +85 ° C
- Temperature coefficient performance: -0.43 %/° C
- Temperature coefficient voltage: -0.34 %/° C
- Temperature coefficient of electricity: -0.05 %/° C
- Weight: 6.09kg
- Dimensions: 988mm x 560mm x 35mm
- Protection class connecting box: IP68 (waterproof)
- Length of the pre -assembled connection cable: 55cm
- Pre -assembled connector: MC4 compatible connector
- Number of cells: 108 (6x18)
The professional solar assembly system
Spoile profiles are the first choice, especially for caravans and motorhomes when it comes to cleaning the solar modules. If you install the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Due to the closed construction of the spoilers, no branches or the like can get caught among the solar modules.
Dimensions Spoiler: L x W x H: 55cm x 8.9cm (of which approx. 3cm contact surface module per spoiler) x 6.5cm.
The gluing
A correctly executed gluing is superior in the hard motor or boot insert of every screw connection. A strength of over 4 N/mm2 can be reached on painted or GRP surfaces, which would be a value on the adhesive surface that would never be accessible in the case of a screw connection into the thin aluminum or GRP. This adhesive set enables a layman to create an absolutely firm connection between spoilers and the respective surface.
The DEKALIN adhesive set contains all components that are necessary so that even the self-incorporation can establish a professional connection. Stainless steel screws for attaching the solar modules are as well included, as are a detailed adhesive instructions. In addition, you only need a commercially available hand lever press for cartridges and a lint -free cloth.
The ABS assembly profiles
Cable guides from the roof into the interior are always quite delicate, as it must be ensured that even after years everything is absolutely tight and remains tight.
Because even the smallest water entry can too often irreparable damage to the internal insulation and furnishings. Especially since the moisture is often noticed quite late. For this reason, the roof implementations were developed: the housings consist of the same UV and weather-resistant material as the assemblies offered in the online shop. They are extremely stable and absolutely sure -footed. The wide glue edge ensures optimal sealing. The implementations with the adhesive set is glued to use the solar assembly brackets. The housing can also be painted as desired and thus adapted to the surface on which they are to be attached to
The professional cabling set
All the necessary cables are delivered plug & play and are already pre -crimped with half -timbered tools. So you don't need to buy special pliers for the MC-4 plugs.
Individual system adjustment possible on request
We strive to implement any wish of our customers as best as possible. With the individual requirements for a solar system, this is of course not always possible 100%. If you want adjustments to one of our systems, just send us an email to info@offgridtec.com - Simply let us know briefly which system your request is related to, what change you would like to have (e.g. additional module, color spoiler, glue or implementation, other loaders, etc.) and you will soon receive a corresponding offer from our sales team.
Scope of delivery:
1x offgridtec 4-01-012876 offgridtec® Mobile black 200W 12V MPPT Caravan solar system
