Offgridtec HomePremium M UPS solar system 12900Wp US3000 21kWh 3-phase

SKU: 4-01-019480
GTIN: 8719076047599
Manufacturers: Offgridtec

Stromzähler

9.419,00 €

Incl. 0% VAT for orders according to §12 Abs. 3 UStG, only for DE

from

10.934,91 €

incl. 19% VAT

plus (Applies to both prices)

Choose tax zone / country of delivery

Available immediately

Arrange a consultation now

OR ORDER DIRECTLY

This item has variations. Please select the requested variation.

Extremely versatile complete package
The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well as being used as a UPS backup solution with a choice between mains and battery priority, this PV system can also be used as a self-consumption system. There are virtually no limits to the performance of this solar system - depending on personal requirements and on request, extensions are possible on both the module and battery side. If a higher output power is required at the inverter, further identical devices can also be added here to increase performance.

In addition to the power electronics, the storage system and the solar modules, all components required for the connection are also included in the scope of delivery, with the exception of the solar module holder, which must be ordered separately. All other components are plug and play - that means no complicated plug installation or the like - connect and you're done. Depending on the selection, the system is supplied with or without a power meter.

Parts list - that's inside:
- 30x Luxen Solar 430W Full Black Solar Module Luxneri Series 5
- Victron Energy 48/5000 MultiPlus-II Inverter
- Victron Energy SmartSolar MPPT RS 450/200-MC4 48V Charge Controller
- Victron Energy Lynx Distributor für DC distribution and fuse protection
- 6x 3.5kWh Pylontech US3000C LiFePo4 storage batteries with integrated BMS
- Inverter connection cable for connecting the Pylontech batteries;r the connection of the Pylontech batteries with the MultiPlus 48/5000 (2m)
- VE.Can to CAN-Bus BMS type A cable 1,8m 1.8m ASS030720018 füfor connecting the Cerbo GX to the memory
- 3m Victron RJ45 UTP cable for connecting the MultiPlus to the Cerbo GX
- Cerbo GX MK2 + GX Touch 50 from Victron Energy - the communication center of your system
- 1m battery cable 25mm² M8 terminal to screw terminal connection füfor connecting the charge controller to the battery
- 1m battery cable 50mm² on both sides M8 Öfor connecting Multiplus and Lynx Distributor
- Offgridtec 10m MC4 to MC4 connection cable 6mm² red/black
- 5m 6mm² MC-4 connection cable plug/socket extension for connecting the two modules;
- Victron 3m VE. direct cable connection cable for connecting the two module strings to the MC4 junction sockets
- Victron 3m VE.Direct cable connection cable for connecting the charge controller to the Cerbo GX
- Victron 125A 58V/48V MEGA-Fuse fuse für Multiplus
- Offgridtec 80A 70V MEGA-Fuse fuse for solar charge controller

When selecting current meter:
1x Victron VM-3P75CT Energy Meter
1x Victron 5m RJ45 UTP cable

Extended use of your HomePremium-system
The HomePremium system can be supplied with or without Victron power meters and cables;The HomePremium system is supplied with or without a Victron power meter and cable, whereby a power meter with connection cable is required to set up an energy storage system.

With this energy meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. Thanks to phase compensation, you can even use the 3-phase meter for single-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.

Luxen Solar 430W Full Black solar module
The monocrystalline and bifacial 430W Full Black Series N5 solar module from Luxen Solar üimpresses with a combination of different technologies, such as the N-TOPCon cell technology and a 108 half-cell layout. SMBB half-cut cell technology was also used in production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE.

Properties:
N-TOPCon cell technology
SMBB half-cut cell technology
Low BOS & LCOE
Bifacial cell module technology
Excellent anti-PID and low LID performance
3 bypass diodes
30-year performance guarantee and 15-year product warranty
High cell efficiency of over 22%

Half-cell technology
In half-cut technology, conventional silicon cells are cut in half using a laser. The resulting halves are then centrally connected in parallel, which leads to an increased output of the solar module by reducing resistance losses.

Bifacial cells
Bifacial modules offer a decisive advantage thanks to their transparent rear sides and special cell technology - they also use the reflected light. This leads to a significantly increased energy yield and makes these modules a particularly efficient choice for your solar system.

Technical data:
maximum output: 430W
Module voltage (Vmp): 32.04V
max. Current (Imp): 13.42A
Open circuit voltage (Voc): 38.96V
Short circuit current (Isc): 14.13A
Module efficiency: 22.02%
Dimensions: 1722 x 1134 x 30 mm
Operating temperature range: -40°C to +85°C
Cells: 108 (6x18)
max. Operating voltage: 1500V DC
Weight: 23.5kg

LiFePo4 storage technology from Pylontech - proven, reliable and safe;safe
The US3000C storage battery from Pylontech is a latest-generation lithium iron phosphate battery that offers maximum safety and service life. Each module has a battery management system (BMS) for comprehensive protection against deep discharge, overcharging and damage caused by high currents or extreme temperatures. Short circuits and reverse polarity are also excluded.

Properties:
Extremely cycle-proof - üover 6000 cycles at 95% DoD (discharge per cycle)
Absolutely intrinsically safe due to integrated protective shutdown (BMS)
High charging and discharging capacity of up to 5KW per module
High storage density
Low weight and compact design
Absolutely maintenance-free and easy to install
10-year warranty

The heart of the system - the Victron MultiPlus-II 48/5000
The Multiplus-II 48/5000/70-50 is a high-end device;combination from Victron Energy that combines classic Multiplus components with an external current sensor and integrated anti-islanding function.

Performance features and properties:
PowerControl and PowerAssist -increase of mains or generator power
Built-in anti-islanding function and connection option for external current sensor (optional)
Can be used as a backup device in grid-connected systems;t in grid-connected systems for power supply in the event of grid failures
Can be used in various ESS (Energy Storage System) applications
Best suited for professional seafaring, yachts, vehicles and land-based, off-grid applications
VE.Bus interface for parallel and three-phase operation, remote monitoring and system integration
Practically unlimited power through parallel and three-phase operation

Technical data:
5000 W power with non-linear load 4000 W continuous load and 9000 W peak power
for 48 V battery voltage, 50 A transfer switch and 70 A battery charger
Output voltage: 230 VAC, frequency: 50 Hz
max. efficiency is 95%, protection class IP22

Maximum flexibility thanks to two AC outputs
The main output ensures uninterrupted operation. In the event of a mains failure or an interruption in the shore/generator current, the MultiPlus-II takes over the supply to the connected loads. The switchover takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power if alternating current is available at the input of the MultiPlus-II. Consumers that are not allowed to discharge the battery, such as a water heater, can be connected to this output.

Victron Energy Cerbo GX MK2 and GX Touch 50 - the communication center of your system
The latest development in system monitoring from the company allows you to control and configure your system with ease. Rounded off by the GX Touch 50 - a waterproof 5-inch touchscreen - you always have an overview of your system parameters. The Cerbo's functions allow you to control and monitor the system perfectly, while also making it possible to maximize system performance in an unprecedentedly simple way.

Victron Energy has developed a new system monitor that allows you to easily control and configure your system. The GX Touch 50, a waterproof 5-inch touchscreen, provides a clear overview of your system parameters. The Cerbo module allows you to precisely monitor your system and maximize performance. It is compatible with both solar charge controllers and grid-connected inverters. Mounting materials and connection cables are included. The Bluetooth function of the GX Touch 50 makes accessing your system even quicker and easier. An optional wall bracket is available.

Victron Remote Portal
The Victron Remote Portal (VRM) is a free Victron Energy Service that allows you to read out your system data remotely and configure the devices accordingly. This means you always have full control and overview of all relevant system parameters, even when you are away. The functionality is available online as a demo version and is ideal for getting a first impression - https://vrm.victronenergy.com/landingpage

Safety note: Only have this complete system installed and commissioned by a qualified electrician.

Shipping weight:

1.100,00 kg
Item weight:

1.100,00 kg

Manufacturer
Name: Offgridtec
Street: Im Gewerbepark 11
ZIP-Code, City: 84307 Eggenfelden
Country: Deutschland
Email: info@offgridtec.com

There are no reviews yet.

Offgridtec HomePremium M UPS solar system 12900Wp US3000 21kWh 3-phase

Legal guarantee of conformity