The self-sufficient M-Master is the medium-sized complete system of the self-sufficient family and delivers an average daily yield of 800 watt hours between March and October. The electricity generated is saved in the cycle festival 122AH AGM battery - the high -quality loader with integrated display gives you information about the charging status of the battery while your 230V consumers can be operated on the sine voltage converter. The whole thing is of course delivered including professional connection cable kit - put together and get started. The system is suitable for a full range of applications-starting with 12V lighting, to loading laptop, cell phone and camera batteries and other small consumers, up to 230V household appliances with a maximum permanent output of 1000W (15min)
Properties of the self-sufficient M-Master
If necessary, expandable by the module side by 2 x 100W with low installation effort
Average daily yield between March and October: approx. 800Wh (approx. 66AH)
Plug & Play connected system - put together and get started
Enables the operation of 12V and 230V consumers, as well as 5V USB customers
USB charging option right on the loader (max. 2.4a)
Easy -to -read LCD display provides information about all operating parameters
Flexible assembly option thanks to the 8m connection cable from module to controller
Extensive electronic protective functions, such as overload protection, over -temperature protection, undervoltage shutdown, short -circuit protection, reversal, etc.
RS485 Communication sport on the voltage converter offers extensive configuration options via PC (Interface Kabel RS485 for USB included)
Deload control enables temperature -compensated cargo - temperature sensor included in the scope of delivery
Configurable 12V load exit on the loader for consumers up to max. 30a - suitable e.g. for light control
Areas of application
This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operating small cooling boxes and refrigerators, as well as charging the cell phone and laptop is easy with this system. The installation on the motorhome is also conceivable - we also have corresponding brackets and adhesets for fastening.
Extensive connection options
230V AC 50Hz 1000W (15min - 1000W / permanent - 800W / short -term (start -up flows) - 1600W) SchukoSteck can on the sinus voltage converter
12V consumer output with 30A power directly at the loader
2 x USB loading port on the loader with max. 2.4a (total)
1 x USB loading port on the voltage converter with max. 1a power
Partial list - that's in:
2 x 100W monocrystalline solar module from offgridtec 1030 x 520 x 35 mm
1 x pair of solar connectors compatible branches for the parallel switching of the two solar modules
1 x 30a PWM charge controller with a clear LCD display and USB charging option - the device also has a 30A load output and can be used simply - all important parameters can be read on the display
1 x 122AH AGM battery with M8 screw terminal Dimensions: 406 x 174 x 233 mm (+5mm terminal) - the battery is absolutely maintenance -free and leak -proof and lasts up to 10 years depending on use
1 x 1000W 12V to 230V sinus voltage converter with a Schukosteck can including connection cable - the nominal power of 1000W can be output by the device for 15 minutes - the inverter 800W and can process short -term start -up currents up to 1600W
1 x 8m 6mm² professional connection cable solar module to loading controller with original steeplitis solar plugs and high -quality Lapp oil flex 2x6mm² solar cable
1 x 1.5m 10mm² professional battery connection cable with MIDI safety holder, 40A MIDI fuse and M8 ring cable shoes for the connection between loader and battery
1 x temperature sensor with 3m length for connecting the controller to the battery
1 x battery connection cable 25mm² 40cm ozone, UV and temperature resistant
1 x fuse holder
1 x 125a mega fuse for installation between voltage converter and battery plus pole for protection against short circuit
1 x 40a midi fuse
Roof holder for the solar module
Since there are various requirements for the bracket for a module and this vary greatly depending on the roof type, the systems of the self -sufficient series are not equipped with an investor by default. Of course, this can be purchased - you will find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Fastening kit for inclined roof assembly on roof tiles (Frankfurt pan, etc.)
Fastening kit for inclined roof assembly on roofing felt, corrugated and tin roofs with wood substructure
Brick fastening kit for sloping roof assembly on biebertail
Scope of delivery:
1x solar system Autark M-Master with 2x100W solar module, 30A PWM charge controller with LCD display and USB ports, 1000W sinus voltage converter, 122Ah AGM battery, operating instructions
