The Growatt SPH7000TL3 BH-UP Hybrid Inverter is a state-of-the-art solution for solar projects. With intelligent load management, a wide battery voltage range of 100-550 V and a VPP interface, it offers flexibility and efficiency. The inverter supports solar systems with a total output of up to 10.5 kW and enables an uninterruptible power supply. With these features, the SPH7000TL3 BH-UP is the ideal solution for flexible and reliable solar systems.
Features:
100% three-phase asymmetrical output
Intelligent power control at phase level
Wide battery voltage 100-550 V
UPS function (UPS) with 10ms switching time
VPP interface
Scalable system configuration
DC/AC type II SPD
DC/AC ratio of up to 1.5
;ratio up to 1.5
Two MPP (Maximum Power Point) trackers
Supports lithium and lead-acid batteries
Hybrid inverters
In contrast to conventional inverters, hybrid inverters offer the option of not only feeding the solar power generated into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by preferring to use the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity.
Operating modes - configurable according to system requirements
Online mode:
For optimum system integration of the SPH inverter, different operating modes can be set. When entering directly on the device, a priority mode can only be set for a certain period of time. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function).
Load first:
With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the excess energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid.
Battery first:
In this mode, the inverter charges the battery first with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated.
Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate.
Backup mode:
If there is no longer any grid voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt SPH automatically switches to backup mode. This ensures that the AC output is supplied via the EPS LOAD connection. The required energy is only supplied via the solar system and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated.
Maximum Power Point Tracking
Through the use of Maximum Power Point Tracking (MPPT) technology, a solar system can achieve the optimum yield. The MIC inverter is equipped with an MPPT, which adjusts the optimum ratio of voltage and current over the course of the day according to the solar radiation and the module temperature of the solar modules. With its wide MPPT voltage range, many solar modules can be connected, which enables efficient energy generation. This advantage is particularly evident when the sky is partially cloudy and the light intensity changes continuously.
Intelligent load management
The integrated smart load control of the inverter enables precise and efficient control of energy consumption. By using a potential-free contact, electrical loads can be controlled intelligently and prioritized. This function enables automatic detection of energy requirements and optimum use of the available energy. Smart load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your solar system.
Growatt monitoring platform
You can use the Growatt monitoring platform by using the optional Shine series accessory. This platform is available as a smartphone app for iOS and Android as well as a web version. The Shine accessory must be purchased separately, but use of the platform is free of charge. Shine allows you to configure and monitor all your Growatt products and also allows you to view self-consumption and track trends.
The following Shine options are compatible with the SPH series:
ShineWiFi-X
ShineLink-X
Shine4G-X
ShineMaster
Technical data
Recommended module power: up to 10.5 kW
Max. DC voltage: 1000V
Starting voltage: 120 V
MPPT voltage range: 120-1000 V/600 V
Battery voltage range: 100~550V
Max. Charge/discharge current: 25 A
Continuous charge/discharge power: 7000 W
Nominal AC power: 7000 W
Max. Apparent power: 7000 VA
Max. AC output power: 7000 W
Max. Output current: 10.6 A
Nominal AC voltage range: 230/400 V (310~476 V)
AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz)
Compatibility rating: IP65
Manufacturer's warranty: 10 years
Maximum efficiency of 98.2%
Dimensions: 505 x 453 x 198 mm
Weight: 30 kg
Scope of delivery
1x Growatt SPH7000TL3 BH-UP inverter
