The Growatt Mod 10KTL3-XH Hybrid-Inverter (MPN Mod 10KTL3-XH) is a 3-phase inverter that, with its high performance and compactness, ensures simple and user-friendly operation of large solar systems. The inverter is characterized by a high efficiency of 98.6%, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent MPPT inputs and a maximum PV output of 20,000W, the inverter also has an OLED touch display, which is of great advantage for simple and uncomplicated operation. In addition, loads and batteries can be connected. For this purpose, the ARK XH battery system of 7.68-25.6 kWh is compatible.
The Mod-XH series:
2 independent MPPTS
Battery-Ready, future-proof
Type II SPD on DC and AC page
Integrated AFCI function
Support for export limitation
Oled and Touch button
DC/AC ratio up to 2.0
Hybrid inverter
In contrast to conventional inverters, hybrid inverter can not only feed the electricity generated from the solar system into the power grid, but also store it in batteries. This makes the solar power available even if the sun does not shine. Another feature of hybrid interverters is their ability to optimize the electricity consumption of a household by preferably using the solar power directly in the household before it is fed into the network.
Active security with AFCI function
An ARC Fault Circuit Interruptter is a fault beam protection device. It protects circuits in the case of disruptive lights and acts in the low -voltage installation as a circuit breaker against contact errors. In addition to its protection, electricity and voltage processes using digital signal processing, this analyzes circuits in the event of interference signatures. Colloquially, the AFCI is also called fire protection switches, since older signals can be prevented from overheating at poor contact points or in the event of overturning between two ladders, fires.
Two MPP trackers for optimal solar yields
With the maximum Power Point Tracker technology, the best possible yield of a solar system is generated. The MPPT determines the optimal ratio between radiation strength, temperature on the module and solar cell type during the day. Thanks to the two MPP trackers in the Mod-Inverter, the optimal working point for the two PV strands can be optimized separately. The two trackers work independently of each other and so, for example, a shading in the event of a strand would have no influence on the second.
Operating modes-Depending on the system requirements, configurable
Work mode: The mod-XH converts the DC power of PV strings into AC performance and feeds it into the power grid. As soon as the output power does not meet the requirements for the network -coupled electricity generation, the normal operating mode is switched off.
Error mode: The inverter monitors and regulates the condition of the system in real time. If z. B. System or inverter errors occur, the display shows the error information and separates the inverter output from the network.
Deputy mode: In the event of a low or lack of sunlight, the inverter automatically switches off.
AC & DC Type II SPD
AC and DC-Type II SPDS (Surge Protective Devices) protect network-inverters from overvoltage and are an important component for the safety and reliability of solar systems. AC-SPDs protect the alternating current and DC-SPDs the DC side of the inverter. These protective devices derive excess voltage impulses, which can be caused by lightning strikes, switching processes in the power grid or other events.
Numerous protective functions
DC / AC overvoltage cancellation: Type II
DC sales protection and separator switch
Isolation resistance detection
AC short-circuit protection
Network, residual current and string monitoring
Island network detection
AFCI protection (faults arch recognition)
Growatt monitoring platform (usable with optional accessories)
The Growatt Monitoring platform can be used with the optional accessories of the Shine series. This is available as a smartphone app (for iOS and Android), as well as in a web version. The shine accessories must be purchased separately, the use of the platform is free of charge. You can configure and monitor all of your growatt products via Shine, the display of self-consumption and trend is also possible.
The following shine options are compatible with the Mod 3-15KTL3-X/XH series:
Shinewifi-X
Shine4G-X
Shinelan-X
Shinelink-X
Technical specifications
Entrance (DC)
Max. PV line: 20000W
Max. Input voltage: 1100V
Start voltage: 160V
Nominal voltage: 600V
MPPT voltage area: 140-1000V
Max. Input current per mppt: 16A
Max. Short circuit current per mppt: 20a
Entrance (DC battery)
Compatible with ARK XH battery system
Operating voltage area: 600-950V
Max. Operating current: 18.5A
Max. Charging: 10000W
Max. Discharge: 11000W
Exit (ac)
AC-nation: 10000W
AC-native voltage range: 220V/380V, 230V/400V (340-44V0)
Frequency range: 50/60 Hz (45-55Hz/55-65Hz)
Max. Starting current: 16.7a
Generally
Max. Effect: 98.6%
Dimensions: 425 x 387 x 178 mm
Weight: 14 kg
Operating temperature range: -25 ° C - +60 ° C
Protection class: IP66
Manufacturer guarantee: 5 years
scope of delivery
1x growatt mod 10ktl3-xh hybrid inverter
