VOTRONIC Automatic Charger PB 1225 SMT 2B

Product number: 3102
EAN: 4250683615329
google-icon

Google Reviews

4.9

113 Reviews

€363.69*

% €446.63* (18.57% saved)

No longer available

Enter your email in the field below and we will notify you when the product is back in stock.

 

  • Loading programs No. 1, 2, 4 and Li (gel, AGM, acid, lifepo4) adjustable to battery type
  • The charging voltage is free of tips and regulated so that an overload of the batteries is excluded.
  • Fully automatic operation: The charger can be constantly connected to the battery and keeps it in full load. In the event of a network failure, the batteries will not be unloaded (separation by security switch).
  • Lithium LIFEPO4-MAINTENANCE, Auto Wake Up, maintenance phase: Regular automatic activation of the battery cell balancing every 10 days to ensure the full load of the battery.
  • Lead battery regeneration with long downtimes twice a week against harmful acidic layers.
  • Parallel and buffer operation: With simultaneous consumption, the battery is charged or fully received. The adaptation of the loading times calculates and monitors the charger automatically.
  • Monitoring-free charge: Multiple protection against overload, overheating, overvoltage, short circuit, polarity, misconduct and battery recharge through electronic stop to the complete separation of charger and battery with built-in safety switch.
  • Connection for battery temperature sensor (accessories temperature sensor 825, item no. 2001): In the case of lead batteries (acidity, gel, AGM), the charging voltage is automatically adjusted to the battery temperature, causes a better in cold Full loading of the weaker battery, in summer temperatures, unnecessary battery absorbing and thus battery stress is avoided.
    With LIFEPO4 batteries, the battery temperature sensor is required for the function: it serves battery protection at high and especially at low temperatures below 0 ° C.
  • Silent Run function: At the push of a button noise-optimized way of working (night operation).
  • Power supply function: enables consumers to be supplied without a battery (e.g. battery change).
  • Charging cable compensation: Tension losses on the charging cables are automatically excavated.
  • Construction network filter: Problem-free parallel operation with solar systems, wind and benzingen generators, alternators etc. on a battery.
  • Charging aid for low -level lead batteries: gentle invitation to the (lead -acid, -gel, -gm) battery up to 8 V, then powerful support of the battery with any still switched on consumers.
  • Separation of the batteries in the event of a power failure, overheating, misconduct (safety switch per charging output)
  • Separate side charging output "S" for the support and maintenance charge of the vehicle starter battery

Also available in boats with the electronics protected from moisture!

 

Technical specifications

 Network voltage (network frequency 45 - 65 Hz) 110 V - 230 V
 Network function voltage area, all types 85 V - 270 V, briefly 305 V (5 seconds)
 Network voltage area for full charging power 180 V - 270 V
 Network performance max. 400 W
 Network performance recording at loading management 1.9 W
 Active sinus-shaped power factor correction (Cosphi <= 1) Yes
 Charging current approx. 110 V network voltage 18 A
 Main charging output battery I
 Battery native voltage lead/lifepo4 battery 12 V / 12 V-13.3 V
 Selectable charging programs lead gel/AGM/acidity, lifepo4 4
 Battery capacity (recommended) 100 Ah - 180 Ah
 Battery capacity (after application, e.g. Lifepo4) 60 Ah - 290 Ah
 Charging current main load, i-phase, 8 V to U1; 0-15.5 h 25 a
 Loading/buffer/load current, regulated U1-U2-U3 phase 0 a - 25 a
 Minimum battery voltage for the start of the load 0 V
 Preliminary flow, lowest -download batteries 0 V - 8 V 12.5 a
 Return current made of battery (power failure) <0.5 MA
 Reset voltage (30 sec), battery type dependent 12.75 V / 13.25 V
 Charging stress limit (protection of affiliated consumers) 15.0 V
 External overvoltage shutdown (20 sec) 15.5 V
 Tension <30 MV RMS
 Charging timer 4-fold
 Group/short circuit/back load/safety protection Yes
 Safety timer per loading phase I-/U1-/U2- Yes
 Lead battery regeneration with a long service life, 2x aw. 1 H Yes
 Lifepo4 car Wake Up at a long time, 10 daily 0.5 h daily Yes
 or Lifepo4 lithium rest conservation (seasonal company) Yes
 Input for battery temperature sensor Yes
 Power supply operation (e.g. further supply for battery changes) Yes
 2. Sideline Vehicle Starter Battery II (registration output network)
 Battery native voltage (lead) 12 V
 Charging current or resilience as a registration output 0 a - 2 a
 Group/short circuit/back load/safety protection Yes
 Connection for remote control automatic charger Yes
 Device installation position any
 Temperature range -20 / +45 ° C
 Speed ​​-controlled, temperature -controlled fan Yes
 Gradual delegation of the charging capacity at over temperature Yes
 Safety shutdown at overheating Yes
 Fan noise lowering, night operation (Silent Run) Yes
 Protection class / protection class I / IP21
 Dimensions, Dimensions including fastening flanges/feet, without connections 228 x 139 x 74 mm
 Weight 1300 g
 Ambient conditions, humidity Max. 95 % RF, not condensing
 Safety regulations EN 60335-2-29
 Scope of delivery: network cable, operating instructions

0 of 0 reviews

Leave a review!

Share your experiences with other customers.