Solar electronics
HM-1500
Hoymiles HM-1500 Microinverter module inverter
The HM-1500 from Hoymiles is the perfect microwicator for your balcony power plant. The compact lightweight (only 3.75kg including the 2.06m AC cable) is suitable for solar power production with up to four solar panels up to an output of 470W. Just like all other Hymiles microw replacement, it is suitable for long operating hours and a wide PV module application, since its commissioning is very low (only 22V) and the DC input area of the operating voltage (16-60V) is extremely wide.
CharacteristicsMinimizing the effects of e.g. shading, dust or aging by MPPTHigh quality energy generation with high MPPT accuracyOptional: System monitoring via the smartphone app S-Miles Enduser or the S-Miles Cloud (data transfer unit DTU is required)Optimal system reliabilityTop efficiency of 96.7%12 years of product guaranteeHigh security through integrated protective functionseasy installationLong lifetime6000V power protection protectionCorresponds to VDE-AR-N 4105: 2018 & EN50549-1: 2019functionalityThe Hymiles microving interchangeable converts the solar power obtained from its photovoltaic system, AC-Netz-compliant and feeds it directly into the supply network. Each Hoymiles microv signator is connected individually to a PV module of your system. This unique configuration means that each PV module is controlled by an individual maximum Peak Power Point Tracker (MPPT). This ensures that regardless of the performance of the other PV modules in the system, the maximum available service is fed into the supply network by each individual module. If individual PV modules of the system are impaired by shading, dirty, alignment or false adjustments, the HM-1500 still guarantees a peak for its associated PV module. The result is the maximum possible energy production of your PV system.
Optimal reliabilityMicro inverter systems are naturally more reliable than conventional inverter. The decentralized structure of a microw interchangeable system ensures that the entire PV system does not fail if the entire PV system fails. Hymiles microving signpership are designed for operation with full performance at ambient temperatures of up to +65 ° C (150 ° F). The housing of the micro inverter is designed for the outer installation and corresponds to the type of protection IP67.
Easy constructionPV systems with hymiles microving switchers are very easy to plan and install. You can install a combination of PV modules of different types, in any direction and in a desired number (maximum number of devices in series: 3). You do not need to install cumbersome conventional inverter. Each microw replacement can be installed quickly on the PV installation tile or directly under the PV module. The PV module is connected to the microw interchangeable directly on site and eliminates the risk that people are exposed to dangerously high DC voltage.scope of delivery
Hoymiles HM-1500 microw interpreters without accessories
Technical specificationsRecommended module performance: up to 470W (per module)Top performance of the voltage area: 36 ~ 48VConsider voltage: 22VOperating voltage area: 16 ~ 60VMaximum input voltage: 60VMaximum input current: 4*11.5aMaximum input cocaral closure current: 4*15aNominal output performance: 1500VANominal output current: 6.52a at 230VNominal output voltage: 230V / 180-275VCEC weighted efficiency: 96.50%Ambient temperature range: -40 ~+65 ° CDimensions (BXHXT): 280 x 176 x 33 mmWeight: 3.75kg (including 2.06m AC cable)Housing classification: IP67
BC01
Betteri BC01 socket female mains plug AC 3-pin IP67 network connection
The BC01 socket female from Betteri (MPN BC01B) is used to connect to an Envertech, Hoymiles or Huayu inverter. The opposite side can be connected to an H07RN-F rubber hose line with a diameter of 10-14mm. It is a three-pin socket made of UV-resistant material. In addition, it is dust and waterproof according to protection class IP67 and is therefore suitable for use indoors and outdoors.
Product properties
Suitable for 1-phase inverter from e.g. Envertech, Hoymiles or Huayu
Suitable for lines with a diameter of 10-14mm
Dust and waterproof according to IP67
UV-resistant- suitable for indoor and external assembly
technical features
Pole number: 3-pin
Material: Plastic
Operating temperature range: -40 ° C - +85 ° C
Nominal voltage: 230V AC
Nominal current: 25a
Dimensions: 85.5 x 34.8 x 34.8 mm
Weight: approx. 50g
Scope of delivery:
1x Betteri BC01 socket female power plug
Product type 1
Inverter accessories
Manufacturer
Betteri
Manufacturer part number
BC01B
EAN
0764137154554
Dimensions
85.5 x 34.8 x 34.8 mm
Weight
0.05 kg
BC01C
Betteri End cap closure cap for BC01 sockets IP67 Female
The end cap of Betterie (MPN BC01C) is used to close the non-used 3 pole AC socket of the PV inverter from e.g. Envertech, Hoymiles or Huayu.
Product properties
Suitable for 1-phase inverter from e.g. Envertech, Hoymiles or Huayu
Closure of the Betteri BC01 Female socket
Dust and waterproof according to IP67
UV-resistant- suitable for indoor and external assembly
Scope of delivery:
1x Betteri locking cap for BC01 socket
Product type 1
Inverter accessories
Manufacturer
Betteri
Manufacturer part number
BC01C
EAN
0764137154561
SCC115045212
Victron SmartSolar MPPT 150/45
The Smartsolar MPPT 150/45 from Victron Energy, belongs to the latest generation of smart solar controllers and processes 45A solar current and can work flexibly with 12/24/36/48 V batteries. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new device class. The SmartSolar 150/45 is also available as a version with MC4 connections on the solar side of the charge controller instead of screw terminals. In addition, this model is capable of parallel operation with other controllers of the same type.In comparison to the BlueSolar series, the Bluetooth module is already permanently integrated into the controller in the Smartsolar family, making the smart dongle superfluous in this device. The optional MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable entries and connection terminals of the controller, protecting them from external influences and contact.
Key product features The latest generation of ultra-fast MPP tracker ensures the best possible yield even in cloudy conditionsNominal charging current 45A, 150V maximum PV open-circuit voltageMaximum PV power: 12 V 650 W / 24 V 1300 W / 48 V 2600 WVictron Energy part number (MPN): SCC115045212automatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllersfixed integrated Bluetooth module for app-supported analysis and configuration of the controller (via free Victron app on compatible devices)integrated VE.Direct data communication port for communication with additional devices such as the GX Color Control Panel or a Smart BMV battery monitorHigh maximum efficiency of 98%Parallel operation with other 150/45 controllers possible;adjustable constant charge voltageadjustable float charge voltagesuitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteriesfully programmable charging algorithms that can later be manually activated and switched via a switch on the housing;useintegrated protection against battery polarity reversalmulti-stage and adaptive charging algorithmremote switching on and off possible via 2-pin plugprotection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller;for the connection area of the controllerIntegrated temperature sensor balances maintenance and constant charging voltage according to temperatureDay/night time control and light dimming option130x186x701.3 kGSmart data communication via VE.Direct and BluetoothModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the MPPT 150/45 SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Maximum Power PointIn the event of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimum MPP. The innovative algorithm of the SmartSolar 150/45 will always maximize the energy yield by adjusting to the optimal MPP.
High-speed MPP trackerIn particular in overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Electronic protectionProtection against reverse polarity battery connectionPV reverse current blockingProtection against overheating of the deviceProtection against short circuitsProtection against reverse polarity PV connectionVE.Direct data communication portVE.Direct in text mode transmits all important parameters to other devices connected to the charge controller every second and thus offers the option of communicating with additional GX Color Control system panels. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. Scope of delivery1x Victron SCC115045212 SmartSolar MPPT 150/45 12V 24V 36V 48V 45A charge controllerOperating instructions
SCC110020160R
Victron SmartSolar MPPT 100/20 (up to 48V)
The Smartsolar 100/20 up to 48V from Victron Energy is an MPPT solar charge controller with 20A max. charging current for charging 12V, 24V and 48V batteries. In contrast to the Bluesolar version, the Smart version has integrated Bluetooth, which makes the purchase of a Bluetooth dongel superfluous. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control GX or the MPPT Control. The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. The optional MPPT WireBox-S 100-20 from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable entries and connection terminals of the controller, protecting them from external influences and contact.
Technical features:20A max. charging current. charging current, suitable for 12V and 24V batteriesnominal PV power for 12V systems: 290Wnominal PV power for 24V systems: 580Wnominal PV power for 48V systems: 1160W20A load outputhigh peak efficiency of 98%free programmable battery charging algorithm (üvia the free Victron Connect APP)Light dimming functions programmable (üvia the free Victron Connect APP)Ultrafast maximum power point trackingmax. PV open-circuit voltage: 100VCharging algorithm: multi-stage, adaptiveIntegrated Bluetooth module100x113x500.7kgUltrafast maximum power point trackingIn particular in overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charging controllers and by up to 10% compared to slower MPPT controllers.
Intelligent load output Deep discharging of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a specified voltage value. Alternatively, an algorithm for intelligent battery management can be selected: see BatteryLife.The load output is short-circuit-proof.
Battery Life: intelligent battery managementIf the solar charge controller is not able to charge the battery to its full capacity within one day, the status of the battery constantly switches back and forth between "partially charged" and "end of discharge". This operating mode (no regular full charge) will damage a lead-acid battery within a few weeks or months.The Battery Life algorithm monitors the state of charge of the battery and, if necessary, raises the threshold for disconnecting the load day by day (i.e. the load is disconnected early), the load is disconnected earlier) until the energy gained is sufficient to charge the battery to almost 100%. From this point, the threshold for disconnecting the load is modulated so that charging to almost 100% is achieved approximately once a week. Scope of delivery:1x Victron Energy Smartsolar MPPT 100/20-48 20A 12V 24V 48V solar charge controller1x operating instructions
HMT-1800-6T
Hoymiles HMT-1800-6T Microinverter module inverter
The HMT-1800-6T from Hoymiles is the perfect three-phase microwicor for your balcony power plant. The compact lightweight (only 5.5kg including the 1.35m AC cable) is suitable for solar power production with up to 6 solar panels with an output of 405W each. Just like all other Hymiles microw replacement, it is suitable for long operating hours and a wide PV module application, since its commissioning is very low (only 22V) and the DC input area of the operating voltage (16-60V) is extremely wide.
Characteristics
Minimizing the effects of e.g. shading, dust or aging by MPPT
High quality energy generation with high MPPT accuracy
System monitoring via the smartphone app S-Miles Enduser or the S-Miles Cloud (optionally with a Hymile data transmission unit DTU)
Optimal system reliability
Top efficiency of 96.5%
12 years of product guarantee
High security through integrated protective functions
easy installation
Long lifetime
Corresponds to VDE-R-N 4105: 2018 & EN50549-1: 2019
functionality
The Hymiles microving interchangeable converts the solar power obtained from its photovoltaic system, AC-Netz-compliant and feeds it directly into the supply network. Each Hoymiles microv signator is connected individually to a PV module of your system. This unique configuration means that each PV module is controlled by an individual maximum Peak Power Point Tracker (MPPT). This ensures that regardless of the performance of the other PV modules in the system, the maximum available service is fed into the supply network by each individual module. So if individual PV modules of the system are impaired by shading, dirty, alignment or false adjustments, the HMT-1800-6T still guarantees a peak for its associated PV module. The result is the maximum possible energy production of your PV system.
Optimal reliability
Micro inverter systems are naturally more reliable than conventional inverter. The decentralized structure of a microw interchangeable system ensures that the entire PV system does not fail if the entire PV system fails. Hymiles microving signpership are designed for operation with full performance at ambient temperatures of up to +65 ° C (150 ° F). The housing of the micro inverter is designed for the outer installation and corresponds to the type of protection IP67.
Easy construction
PV systems with hymiles microving switchers are very easy to plan and install. Up to 6 solar modules per model can be connected. You do not need to install cumbersome conventional inverter. Each microw replacement can be installed quickly on the PV installation tile or directly under the PV module. The PV module is connected to the microw interchangeable directly on site and eliminates the risk that people are exposed to dangerously high DC voltage.
scope of delivery
1x Hymiles HMT-1800-6T microw interchangeable without accessories
Technical specifications
Recommended module performance: up to 405W (per module)
Maximum input voltage: 60V
MPPT voltage area: 16-60V
Involving voltage: 22V
Maximum input current: 6x11.5a
Network connection: three -phase
Nominal output performance (VA): 1800
Nominal output current: 2.61 x 3
Nominal output voltage/range: 230 V/AC/400 V/AC, 3W+N+PE
Nominal frequency/range (Hz): 50/45-55 or 60/55-65
Performance factor (adjustable):> 0.99 0.8 preceded by default ... 0.8 released
Displacement factor: <3%
Maximum units per 10 AWG strand2: 11
Maximum units per 12 AWG strand2: 7
CEC-leading efficiency: 96.5 %
MPPT-nose level: 99.8 %
Performance consumption at night (MW): <50
Ambient temperature range: -40 ~+65 ° C
Dimensions (BXHXT): 330 x 250 x 35 mm
Weight: 5.5 kg (including 1.35m AC cable)
Housing classification: IP67
SCC115035210
Victron SmartSolar MPPT 150/35
The SmartSolar 150/35 MPPT from Victron Energy belongs to the latest generation of smart solar charge controllers, with integrated Bluetooth for data transmission and configuration via app on the smartphone or tablet. It supports batteries with a voltage of 12V 24V 36V or even 48V and is therefore very versatile. The maximum charging current is 35A and uses the latest charging methods. Depending on the system voltage, the regulator can therefore efficiently charge your batteries with 500W (12V) to 2000W (48V). In addition, this device also enables the compensation of partial shading and one of the most reliable MPPT trackers on the market. The optional MPPT WireBox-M from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable entries and connection terminals of the controller, protecting them from external influences and contact.
Key product features: Ultra-fast MPP tracker of the latest generation ensures the best possible yield even in overcast conditionsAutomatic detection of the MPP voltage in the event of partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllersIntegrated VE.Direct data communication port for connection. For communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control PanelHigh maximum efficiency of 98%Fully programmable charging algorithms that are later activated and switched manually via a switch on the housingNominal charging current 35A, 100V maximum PV open-circuit voltage12V:500W / 24V:1000W / 36V:1500W / 48V:2000Wintegrated protection against battery polarity reversalmulti-stage and adaptive charging algorithmintegrated temperature sensor balances maintenance and constant charging voltage according to temperatureday/night time control and light dimming option130x186x701.3 kgVE-Direct data port for programming, data evaluation in real time and display of the historyModern Apple and Android smartphones and tablets can be connected via VE.Direct to the GX Color Control system monitors, the Venus GX or the MPPT Control Panel. High-speed MPP trackerIn particular in cloudy weather, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charging controllers and by up to 10% compared to slower MPPT controllers.In addition, the 150/35 features several other innovative technologies such as the VE.Direct communication port.
Comprehensive electronic protectionProtection against reverse polarity battery connectionPV reverse current blockingProtection against overheating of the deviceProtection against short circuitsProtection against reverse polarity PV connectionScope of delivery1x Victron Energy SCC115035210 SmartSolar MPPT 150/35 12V 24V 36V 48V 35A charge controllerOperating instructions
SCC110030210
Victron SmartSolar MPPT 100/30
The Victron Energy SmartSolar MPPT 100/30 30A 12V/24V solar charge controller is the new version of the BlueSolar 100/30. The Smart version differs from the Blue version only in the permanently integrated Bluetooth communication module. This allows the SmartSolar charge controller to be fully monitored and analyzed on any app-enabled device. The Victron Connect app required for this can be installed free of charge. Product features: Ultra-fast MPP tracker of the latest generation ensures the best possible yield even under cloudy skiesIntegrated VE.Direct data communication portHigh maximum efficiency of 98% for 12V and 24V systems integrated Bluetooth module30A maximum charging currentFully programmable charging algorithms that can later be activated and used manually via a switch on the housing;100V maximum PV open circuit voltage440W maximum PV power for 12V, 880W for 24V systemsintegrated protection against battery polarity reversalmulti-stage and adaptive charging algorithmday/night time control and light dimming option130x186x701.3 kgmore protection:In comparison to the 75/10, 75/15 and 100/15 models, the SmartSolar 100/30 MPPT ühas overheating protection with a switch-off function and automatic restart after reaching a normal operating temperature.
VE.Direct data communication portVE.Direct in text mode transmits all important parameters to other devices connected to the charge controller every second, thus offering the option of communicating with additional GX Color Control Panel devices from Victron. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. The latest generation of high-speed MPP trackersIn particular in overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30 % compared to PWM charging controllers and by up to 10 % compared to slower MPPT controllers.In addition, the 100/30 features several other innovative technologies such as the VE.Direct communication port.
Programming, real-time data and history displayModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected via the integrated Bluetooth Smart Dongles and the MPPT app or the GX Color Control, for example. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included with the charge controller but can be purchased from us as an option.
Flexible charging algorithmsFully programmable charging algorithm and eight pre-programmed algorithms that can be selected via a rotary knob.Scope of delivery:1x Victron Energy SCC110030210 SmartSolar MPPT 100/30 30A 12V/24V solar charge controller1x operating instructions
BC01B
Betteri BC01 Plug Male mains plug AC 3-pin IP67 network connection
The BC01 plug Male from Betteri (MPN BC01B) becomes a connection to an Envertech, Hoymiles or Huayu inverter. The opposite side can be connected to an H07RN-F rubber hose line with a diameter of 10-14mm. It is a three-pin connector made of UV-resistant material. In addition, it is dust and waterproof according to protection class IP67 and is therefore suitable for use indoors and outdoor use.
Product properties
Suitable for 1-phase inverter from e.g. Envertech, Hoymiles or Huayu
Suitable for lines with a diameter of 10-14mm
Dust and waterproof according to IP67
UV-resistant- suitable for indoor and external assembly
technical features
Pole number: 3-pin
Material: Plastic
Operating temperature range: -40 ° C - +85 ° C
Nominal voltage: 230V AC
Nominal current: 25a
Dimensions: 85.2 x 34.8 x 34.8 mm
Weight: approx. 50g
Scope of delivery:
1x Betteri BC01 Plug Male mains plug
SCC110050210
Victron SmartSolar MPPT 100/50
The Victron Energy SmartSolar MPPT 100/50 50A 12V/24V solar charge controller is the new version of the BlueSolar 100/50. The Smart version differs from the Blue version only in the permanently integrated Bluetooth communication module. This allows the SmartSolar charge controller to be fully monitored and analyzed on any app-enabled device. The Victron Connect app required for this can be installed free of charge. The optional MPPT WireBox-M from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable entries and connection terminals of the controller, protecting them from external influences and contact.
Key product features:The latest generation of ultra-fast MPP tracker ensures the best possible yield even under cloudy skiesIntegrated VE.Direct data communication portHigh maximum efficiency of 98% for 12V and 24V systems integrated Bluetooth module50A maximum charging currentFully programmable charging algorithms that can be activated and used manually later via a switch on the housing;100V maximum PV open circuit voltage700W maximum PV power for 12V, 1400W for 24V systemsintegrated protection against battery polarity reversalmulti-stage and adaptive charging algorithmday/night time control and light dimming option130x186x701.3kgmore protection:In comparison to the 75/10, 75/15 and 100/15 models, the SmartSolar 100/30 MPPT ühas overheating protection with a switch-off function and automatic restart after reaching a normal operating temperature.
VE.Direct data communication portVE.Direct in text mode transmits all important parameters to other devices connected to the charge controller every second, thus offering the option of communicating with additional GX Color Control Panel devices from Victron. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. High-speed MPP trackerIn particular in overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30 % compared to PWM charging controllers and by up to 10 % compared to slower MPPT controllers.In addition, the 100/50 features several other innovative technologies such as the VE.Direct communication port.
Options for programming, real-time data and history displayModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected via the integrated Bluetooth Smart Dongles and the MPPT app or the GX Color Control, for example. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included with the charge controller but can be purchased from us as an option.
Flexible charging algorithmsFully programmable charging algorithm and eight pre-programmed algorithms that can be selected via a rotary knob Scope of delivery:1x Victron Energy SCC110050210 SmartSolar MPPT 100/50 50A 12V/24V solar charge controller1x operating instructions
SCC125060221
Victron SmartSolar MPPT 250/60-Tr
The Smartsolar MPPT 250/60-Tr from Victron Energy is part of the latest generation of smart solar controllers from the premium manufacturer. The controller processes a whopping 60A of solar power and can work flexibly with 12/24/36/48 V batteries with a maximum PV input voltage of 250V DC. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new device class. In addition, this model is capable of parallel operation with other controllers of the same type.In comparison to the 150 series, the 250 series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 series solar controller family has been able to increase efficiency by a further 1 percent to a total of 99%, thus setting new industry-wide standards. This value is currently the best of all solar charge controllers that we know of. Compared to the BlueSolar family, the Bluetooth module is already integrated in the controller of the 250 Smartsolar series, which makes the smart dongle superfluous for this device if you want to analyze and configure the controller via Bluetooth using a smartphone or tablet. Another new feature is the optional LCD display, which can simply be attached to the SmartSolar 250/60-tr as required. The display then provides all the important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable entries and connection terminals of the controller, protecting them from external influences and contact.
Key product featuresmax. PV power: 12 V 860 W / 24 V 1720 W / 48 V 3440 Wmax. Nominal charging current 60A, 250V maximum PV open-circuit voltageThe latest generation of ultra-fast MPP tracker ensures the best possible yield even in overcast conditionsAutomatic detection of the MPP voltage in the event of partial shading ensures a further improvement in yield compared to a "simple" MPPT charger;over "simple" MPPT charge controllersFixed integrated Bluetooth module for app-supported analysis and configuration of the controller (via free Victron app on compatible devices)Optional LCD display availableIntegrated VE.Direct data communication port for connection for communication with additional devices such as the GX Color Control Panel or a Smart BMV battery monitorpioneering efficiency of 99%parallel operation with other 250/85 controllers possible;adjustable constant charge voltageadjustable float charge voltagesuitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteriesfully programmable charging algorithms that can later be manually activated and switched via a switch on the housing;useintegrated protection against battery polarity reversalmulti-stage and adaptive charging algorithmremote switching on and off possible via 2-pin plugprotection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller;for the connection area of the controllerintegrated temperature sensor balances maintenance and constant charging voltage according to temperatureday/night time control and light dimming optionsoptionally also available as a version with MC4 connections3kg200x250x95smart configuration and analysis via Victron Connect AppModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. automatic detection of the Maximum Power Point in the event of partial shadingIn the event of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimum MPP. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by adjusting to the optimal MPP.
New generation high-speed MPP trackerEspecially in overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charging controllers and by up to 10% compared to slower MPPT controllers.
Optional LCD display available for retrofittingIf you prefer to operate and configure the Smartsolar MPPT 250/60-tr directly, you can retrofit the Smartsolar Control SCC900600010 display. The display makes it easy to configure the controller via key input and also provides all important performance data at a glance.
Comprehensive electronic protectionProtection against reverse polarity battery connectionPV reverse current blockingProtection against overheating of the deviceProtection against short circuitsProtection against reverse polarity PV connectionVE.Direct data communication portVE.Direct in text mode transmits all important parameters to other devices linked to the charge controller every second and thus offers the option of communicating with additional devices such as the GX Color Control system panel. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand store.Scope of delivery1x Victron SCC125060210 SmartSolar MPPT 250/60-Tr 12V 24V 48V 60A charge controller1x operating instructions
SCC145120510
Victron SmartSolar MPPT RS 450/200 MC4 48V charge controller
The MPPT RS SmartSolar from Victron Energy is a 48V solar charge controller with a PV input voltage of up to 450 VDC and an output current of 200A. It is used in grid-tied and off-grid solar applications where maximum battery charging power is required. Properties
With ultra-fast maximum power point tracking (MPPT)
Multiple independent MPPT tracking inputs
Isolated PV connections for additional safety
Large MPPT voltage range
Lightweight, efficient and quiet
Integrated display and Bluetooth communication
PV insulation resistance monitoring for safety at higher voltages
VE.Can and VE.Direct connection
E/A connections
Configure and monitor with VictronConnect app or in the VRM portal
The integrated Bluetooth Smart connection enables quick monitoring or configuration of the settings via the app. The integrated 30-day history shows the individual performance of each MPPT tracker. The app enables the display of e.g. battery voltage and current, PV voltage and current, historical data and trends. The VictronConnect app is available for Android, iOS, Windows and macOS X.When the solar controller is connected to a GX device and the internet, the Victron Remote Management Portal (VRM) provides access to the full performance of your SmartSolar RS charge controllers. Additional units connected in series
The SmartSolar RS charge controller is equipped with VE.Can bus connections. This enables communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply "daisy-chained" together with an RJ45 cable. When connected, all individual charge controllers synchronize their charge levels. You can also send your data to a GX device (such as the CerboGX) for monitoring via the same cable. Technical data
Battery voltage: 48V
Nominal charging current: 200A
Max. Charging power: 11.5 kW at 57.6V
Charging algorithm: multi-stage adaptive (customizable)
Max. DC-PV voltage: 450V
MPPT operating voltage range: 80-450V
Number of trackers: 4
Max. PV operating input current: 18A per tracker
Protection class: IP21
Dimensions: 487 x 434 x 146 mm
Weight: 13.7 kg
Scope of delivery:
1x Victron SmartSolar MPPT RS 450/200-RT 48V charge controller
Data sheet
System voltage
48V
Dimensions (LxWxH)
487 x 434 x 146 mm
EAN
8719076051886
Manufacturer part number
SCC145120410
solar module voltagemax153
450 V
max. charging current
200A
Weight
13.7 kg
Protection class IP
IP21
solarmodulstrommax154
18A
Manufacturer
Victron Energy
SCC075015060R
Victron SmartSolar MPPT 75/15
The Smartsolar 75/15 from Victron Energy is an MPPT solar charge controller with 15A max. charging current for charging 12V and 24V batteries. In contrast to the Bluesolar 75/15, the Smart version has integrated Bluetooth, which makes the purchase of a Bluetooth dongle superfluous. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control GX or the MPPT Control.The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. The optional MPPT WireBox-S 75-10/15 from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable entries and connection terminals of the controller, protecting them from external influences and contact.
Technical features15A max. charging current, suitable for 12V and 24V batteriesnominal PV power for 12V systems: 220Wnominal PV power for 24V systems: 440W15A load outputhigh peak efficiency of 98%free programmable battery charging algorithm (üvia the free Victron Connect APP)programmable light dimming functions (üvia the free Victron Connect APP)Ultrafast maximum power point trackingmax. PV open-circuit voltage: 75VCharging algorithm: Multi-stage, adaptiveIntegrated Bluetooth module0.5 kg100x113x40Ultrafast maximum power point trackingIn particular in overcast conditions when the light intensityis increasing;When the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Intelligent load outputDeep discharging of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a specified voltage value. Alternatively, an algorithm for intelligent battery management can be selected: see BatteryLife.The load output is short-circuit proof.
Battery Life: intelligent battery managementIf the solar charge controller is not able to charge the battery to its full capacity within one day, the status of the battery constantly switches back and forth between "partially charged" and "end of discharge". This operating mode (no regular full charge) will damage a lead-acid battery within a few weeks or months.The Battery Life algorithm monitors the state of charge of the battery and, if necessary, raises the threshold for disconnecting the load day by day (i.e. the load is disconnected early), the load is disconnected earlier) until the energy gained is sufficient to charge the battery to almost 100%. From this point, the threshold for disconnecting the load is modulated so that charging to almost 100% is achieved approximately once a week.Scope of delivery:1x Victron EnergySCC075015060R Smartsolar MPPT 75/15 15A 12V 24V Solar charge controller1x Operating instructions
SCC010015050R
Victron BlueSolar MPPT 75/15 Solar charge controller WITHOUT BLUETOOTH
The Victron MPPT 75/15 (without Bluetooth !) belongs to the large family of BlueSolar MPPT charge controllers and, like its larger siblings, it already offers ultra-fast power tracking and can therefore increase the yield of your solar system. The latest generation MPP trackerIn particular under cloudy skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In addition, the 75/15 features several other innovative technologies.
Programming, real-time data and history display Smartphones, tablets and other devices can be connected to the Bluetooth Smart Dongles and the MPPT app or the GX Color Control via VE.Direct, for example. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as an option.
FeaturesUltra-fast MPP tracker ensures the best possible yield even under cloudy skiesIntegrated VE.Direct data communication port for connection for communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel12V 24V systems possible;Nominal charging current 15A220W maximum PV power for 12V, 440W for 24V systemsLoad output with 15A power and automatic load cut-off in the event of imminent battery undervoltage (deep discharge protection)Integrated protection against battery polarity reversalMulti-stage and adaptive charging algorithmProgrammable battery charging algorithmIntegrated battery life algorithm extends the life of your batteries if necessary;extends the life of your batteries if it is active and all loads run via the load output on the controllerDay/night time control and light dimming option100x113x40VE.Direct data communication port VE.Direct in text mode transmits all important parameters to other devices connected to the charge controller every second and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products where full CANbus integration (VE-Direct) would be too expensive.Battery Life Algorithm to increase battery lifeIf the solar charge controller is not able to charge the battery to its full capacity within one day, the status of the battery constantly switches back and forth between "partially charged" and "end of discharge". This operating mode (no regular full charging) is ideal for small lead-acid batteries, but such irregular charging and discharging leads to damage to the battery after just a few months and the service life is sometimes significantly shortened.The Battery Life algorithm monitors the state of charge of the battery and, if necessary, raises the threshold value for disconnecting the load day by day (i.e. the load is disconnected early), the load is disconnected earlier) until the energy gained is sufficient to charge the battery to almost 100%. From this point, the threshold for disconnecting the load is modulated so that charging to almost 100% is achieved approximately once a week. Scope of delivery1x Victron BlueSolar MPPT 75/15 charge controller
SCC020035000
Victron BlueSolar MPPT 150/35 OHNE BLUETOOTH
The Victron MPPT 150/35 Blue Solar -without Bluetooth- belongs to the large family of BlueSolar MPPT charge controllers and offers ultra-fast power tracking and can therefore increase the yield of your solar system.Greater charging and PV performance. The battery voltage range is higher than in the smaller model, so that 48V battery banks can also be used.
VE-Direct options for programming, real-time data and history displayModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected to the Bluetooth Smart Dongles and the MPPT app or the GX Color Control via VE.Direct, for example. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as an option.
High-speed MPP trackerIn particular under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.In addition, the 150/35 features several other innovative technologies such as the VE.Direct communication port.Extensive electronic protection- Protection against reverse battery connection- PV reverse current blocking- Protection against overheating of the device- Protection against short circuits- Protection against reverse PV connection
Product features of the BlueSolar 150/35 35A 12V 24V 36V 48V MPPT- ultrafast MPP tracker of the latest generation ensures the best possible yield even in cloudy conditions- automatic detection of the MPP voltage in the event of partial shading ensures a further improvement in yield compared to other MPPT charge controllers- integrated VE.Direct data communication port for connection for communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panel- High maximum efficiency of 98%- Fully programmable charging algorithms that are later activated and switched manually via a switch on the housing- Nominal charging current 35A, 150V maximum PV open circuit voltage- 12V:500W, 24V:1000W, 36V:1500W, 48V:2000W- integrated protection against battery polarity reversal- multi-stage and adaptive charging algorithm- integrated temperature sensor balances maintenance and constant charging voltage according to temperature- day/night time control and light dimming option- 130x186x70
VE.Direct data communication portVE.Direct in text mode transmits all important parameters to other devices connected to the charge controller every second and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive.Scope of delivery1x Victron SCC020035000 BlueSolar MPPT 150/35 12V 24V 36V 48V 35A charge controllerOperating instructions
DTU-PRO
Hymiles DTU Pro WLAN data transfer unit Data logger for HM
This data transmission unit is exclusively In combination with the hymiles HM-XXX inverters to use.We set up the required user account only for systems that have been purchased from us.The Hoymiles Gateway DTU-Pro is a data transmission unit that collects information and data from PV-Mikro interverters via a 2.4 GHz radio solution and via various communication options such as Ethernet or WLAN to the S-Miles Cloud, the Hoymiles surveillance platform, sends.
Characteristics
Stable communication with micro interrichts of the HM seriesSupports RS485, Einertet port for communication with peripheral devicesMonitoring and data storage at the module levelLocal configuration with S-Miles ToolkitSupport from Fern-O & M, including remote upgrade and parameter settingIntelligent nullexport control and performance export limitationMonitoring of the PV generation and load consumptionfunctionality
The DTU-Pro data transfer unit has a surveillance capacity for up to 99 solar modules. As a result, the system is also suitable for more complex PV systems. The data and alarms can read the users easily and quickly at the module level. Long-distance operation, as well as the remote maintenance of the PV system, can be made comfortably via the Hymiles S-Miles Cloud at any time and from any location.
S-Miles Accoco
The S-Mile account can only be created via the DTUS dealer. Technical specifications
Signal Cloud Communication: WLAN / EthernetSubsarias: every 15 minutesSignal inverter communication: 2.4 GHz own HF (Nordic)Max. Distance (outdoor area): 200mLimitation monitoring data: up to 99 solar modules (depending on the installation environment)Show 4 LEDPower supply input voltage/frequency: 100 V/AC - 240 V/AC/50 or 60 HzPower supply output voltage / current: 5V / 2APerformance recording: 2.5W (typical), 5W (max.)Ambient temperature range: -20 ° C - +55 ° CDimensions: 200 x 101 x 29 mm (without antennas)Weight: 0.28 kgAssembly options: wall / table assemblyScope of delivery:
1x Hoymiles DTU-Pro data transmission unit
SCC125110412
Victron SmartSolar MPPT 250/100-Tr VE.Can
The Smartsolar MPPT 250/100-Tr VE.Can from Victron Energy, belongs to the latest generation of smart solar controllers from the Dutch premium manufacturer. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new device class. In addition, this model is capable of parallel operation with other controllers of the same type. In comparison to the Smartsolar 150ger series, the 250ger series can process a maximum PV input voltage of 250V. This is also one of the reasons why the 250 series solar controller family has been able to increase efficiency by a further 1 percent to a total of 99%, thus setting new standards in the industry. This value is currently the best of all solar charge controllers that we know of. Compared to the BlueSolar family, the Bluetooth module is already integrated in the controller of the 250 Smartsolar series, which makes the smart dongle superfluous for this device if you want to analyze and configure the controller via Bluetooth using a smartphone or tablet. Another new feature is the optional LCD display, which can simply be attached to the SmartSolar 150/85-tr as required. The display then provides all the important information about the controller. If required, the MPPT WireBox-XL Tr from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable entries and connection terminals of the controller, protecting them from external influences and contact.
Key product features The latest generation of ultra-fast MPP tracker ensures the best possible yield even in overcast conditionsAutomatic detection of the MPP voltage in partial shade ensures a further improvement in yield compared to "simple" MPPT charge controllersWith optional LCD displayVE-Can, the solution for the best possible yield;solution for multiple controllersfixed integrated Bluetooth module for app-supported analysis and configuration of the controller (via free Victron app on compatible devices)optional LCD display availablealso available with MC4 connectionsmax. PV power: 12V 1450W / 24V 2900W / 48V 5800Wmax. nominal charging current 100A, 150V maximum PV open-circuit voltagemax. PV input current: 250 Volt integrated VE.Direct data communication port for connection for communication with additional devices such as the GX Color Control Panel or a Smart BMV battery monitorPioneering efficiency of 99%Parallel operation with other 250/85 controllers possibleParallel operation with other 250/85 controllers possibleParallel operation with other 250/85 controllers possibleParallel operation with other 250/85 controllers possibleParallel operation with other 250/85 controllers possible;Adjustable constant charge voltageAdjustable float charge voltageSuitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteriesFully programmable charging algorithms that can be activated and switched manually later via a switch on the housing;useintegrated protection against battery polarity reversalmulti-stage and adaptive charging algorithmremote switching on and off possible via 2-pin plugprotection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller;for the connection area of the controllerIntegrated temperature sensor balances maintenance and constant charging voltage according to temperatureDay/night time control and light dimming option216x295x1034.5kgConfiguration and analysis via Victron Connect AppModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. VE.Can: the solution for multiple controllersWith VE.Can or Bluetooth, up to 25 or up to 10 charge controllers can be connected in series for synchronous charging and connected to a Color Control GX or another GX device.Each controller can be monitored individually, for example on a Color Control GX and on the VRM website (VE.Can) or on a smartphone or iPad (Bluetooth)Maximum Power Point with partial shadingIn the event of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimum MPP. The innovative algorithm of the SmartSolar controller will always maximize the energy yield by adjusting to the optimal MPP.
High-speed MPP tracker In particular in overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Optional LCD display available for retrofittingIf you prefer to operate and configure the Smartsolar MPPT 250/100 directly, you can retrofit the Smartsolar Control SCC900600010 display. The installation effort is limited to simply attaching the display to the SmartSolar. The display makes it easy to configure the controller via key input and also provides all important performance data at a glance.
Comprehensive electronic protectionProtection against reverse polarity battery connectionPV reverse current blockingProtection against overheating of the deviceProtection against short circuitsProtection against reverse polarity PV connectionVE.Direct data communication portVE.Direct in text mode transmits all important parameters to other devices connected to the charge controller every second and thus offers the option of communicating with additional GX Color Control system panels. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand store.
Scope of delivery1x Victron SmartSolar MPPT 250/100-Tr VE.Can 12V 24V 36V 48V 85A charge controller1x operating instructions
HM-1200
Hoymiles HM-1200 Microinverter module inverter
The HM-1200 from Hoymiles is the perfect microwicator for your balcony power plant. The compact lightweight (only 3.75kg including the 2.06m AC cable) is suitable for solar power production with up to four solar panels up to an output of 380W each. Just like all other Hymiles microw replacement, it is suitable for long operating hours and a wide PV module application, since its commissioning is very low (only 22V) and the DC input area of the operating voltage (16-60V) is extremely wide.
CharacteristicsMinimizing the effects of e.g. shading, dust or aging by MPPTHigh quality energy generation with high MPPT accuracyOptional: System monitoring via the smartphone app S-Miles Enduser or the S-Miles Cloud (data transfer unit DTU is required)Optimal system reliabilityTop efficiency of 96.7%12 years of product guaranteeHigh security through integrated protective functionseasy installationLong lifetime6000V power protection protectionCorresponds to VDE-AR-N 4105: 2018 & EN50549-1: 2019functionalityThe Hymiles microving interchangeable converts the solar power obtained from its photovoltaic system, AC-Netz-compliant and feeds it directly into the supply network. Each Hoymiles microv signator is connected individually to a PV module of your system. This unique configuration means that each PV module is controlled by an individual maximum Peak Power Point Tracker (MPPT). This ensures that regardless of the performance of the other PV modules in the system, the maximum available service is fed into the supply network by each individual module. If individual PV modules of the system are impaired by shading, dirty, alignment or false adjustments, the HM-1200 still guarantees a peak for its associated PV module. The result is the maximum possible energy production of your PV system.
Optimal reliabilityMicro inverter systems are naturally more reliable than conventional inverter. The decentralized structure of a microw interchangeable system ensures that the entire PV system does not fail if the entire PV system fails. Hymiles microving signpership are designed for operation with full performance at ambient temperatures of up to +65 ° C (150 ° F). The housing of the micro inverter is designed for the outer installation and corresponds to the type of protection IP67.
Easy constructionPV systems with hymiles microving switchers are very easy to plan and install. You can install a combination of PV modules of different types, in any direction and in a desired number (maximum number of devices in a row: 4). You do not need to install cumbersome conventional inverter. Each microw replacement can be installed quickly on the PV installation tile or directly under the PV module. The PV module is connected to the microw interchangeable directly on site and eliminates the risk that people are exposed to dangerously high DC voltage.
Technical specificationsRecommended module performance: up to 380W (per module)Top performance of the voltage area: 29 ~ 48VConsider voltage: 22VOperating voltage area: 16 ~ 60VMaximum input voltage: 60VMaximum input current: 4*11.5aMaximum input cocaral closure current: 4*15aNominal output performance: 1200VANominal output current: 5.22a at 230VNominal output voltage / range: 230V / 180-275VCEC weighted efficiency: 96.50%Ambient temperature range: -40 ~+65 ° CDimensions (BXHXT): 280 x 176 x 33 mmWeight: 3.75kg (including 2.06m AC cable)Housing classification: IP67scope of delivery
Hoymiles HM-1200 microwores
ASS030537010
Victron Ve.Bus Smart Dongle
TheVe.bus Smart Dongle Victron Energy combines two products in one: On the one hand, it enables the Victron inverter/chargers with VE.Bus port via Bluetooth to pair with your smartphone or tablet, secondly, it complements these devices with a voltage and temperature recording, which is particularly useful when using it is useful with the Multiplus 2 because it has no integrated terminals for the voltage and temperature sensor cabling.The Bluetooth accessories for Victron inverter / chargers: Multi, Multiplus, Multiplus-II, Multigrid, Multigrid-II, Quattros and the Phoenix Inverter series with Ve.Bus connection. Use the VictronConnect appto monitor the operation and operate the system: change the input current limit and switch off between the modes, one and only charger.It adds voltage and temperature recording to the inverters / chargers. Working with all models and especially in combination with the multiplus II, since it has no integrated terminals for the voltage and temperature sensor cabling.For monitoring, the device is a good alternative in smaller yachts and motorhomes, for which the Color Control GX is too large. Simply access the desired information easily and quickly via the smartphone.Data sheet:Permissible humidity: max. 95%, not condensingAmbient temperature: -30 ° + 60 ° CProtection class IP: IP68Weight: 0.06 kg
BC06
Hoymiles T-node set with AC cable 3M for HMT-Inverter
This T-node set with a 3m long AC cable is required to connect the Hotmile HMT micro-vertean. The preferred plug connection can be mounted on the open end of the AC cable.
The connection to the power grid may only be made by an electrician.
Accessories HOYMILES HMT inverter system
A T-node with AC cable is required for each HMT inverterFor each inverter system (from a microinverter), min.Optionally, separation aid and connection cap can be purchasedExample HMT accessory set:
A PV system with 4x HMT-2250 (all connected together)4x T-nodes with AC cable1x unlocking aid1x separation aid (optional)1x end capOr:
Four PV systems with 4x HMT-2250 (each as a single mini system)4x T-nodes with AC cable1x unlocking aid1x separation aid (optional)4x end capScope of delivery:1x Hoymiles T-node with AC cable 3M
SCC115060211
Victron SmartSolar MPPT 150/60-Tr
The Smartsolar MPPT 150/60-Tr from Victron Energy, belongs to the latest generation of smart solar controllers and processes a full 60A of solar power and can work flexibly with 12/24/48 V batteries. Ultra-fast power tracking and automatic power point detection with partial shading are just two of the many highlights of this new device class. The SmartSolar 150/60-Tr is also available as a version with MC4 connections on the solar side of the charge controller instead of screw terminals. In addition, this model is capable of parallel operation with other controllers of the same type.In comparison to the BlueSolar series, the Bluetooth module is already permanently integrated into the controller in the Smartsolar family, making the smart dongle superfluous in this device. Another new feature is the optional LCD display, which can simply be attached to the SmartSolar 150/60-Tr as required. The display then provides all the important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable entries and connection terminals of the controller, protecting them from external influences and contact.
Key product featuresThe latest generation of ultra-fast MPP tracker ensures the best possible yield even in overcast conditionsNominal charging current 60A, 150V maximum PV open-circuit voltageMaximum PV power: 12 V 860 W / 24 V 1720 W / 48 V 3440 WVictron Energy part number (MPN): SCC115060210automatic detection of the MPP voltage with partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllerswith optional LCD displayfixed integrated Bluetooth module füfor app-supported analysis and configuration of the controller (via free Victron app on compatible devices)optional LCD display availableintegrated VE.Direct data communication port for connection to the GX Color Control Panel or a Smart BMV battery monitor for communication with additional deviceshigh maximum efficiency of 98%parallel operation with other 150/60-Tr controllers possibleadjustable constant charge voltageadjustable float charge voltagesuitable for all AGM, GEL, lead-acid calcium-calcium and lithium batteriesfully programmable charging algorithms that can later be activated and switched manually via a switch on the housing;useintegrated protection against battery polarity reversalmulti-stage and adaptive charging algorithmremote switching on and off possible via 2-pin plugprotection class IP 43 for the electronic components and protection class IP 22 for the connection area of the controller;for the connection area of the controllerIntegrated temperature sensor balances maintenance and constant charging voltage according to temperatureDay/night time control and light dimming optionTr = screw connection200x250x953kgsmart data communication via VE.Direct and BluetoothModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the MPPT 150/60-Tr SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Maximum Power PointIn the event of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimum MPP. The innovative algorithm of the SmartSolar 150/60-tr will always maximize the energy yield by adjusting to the optimal MPP.
High-speed MPP trackerIn particular in overcast conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Comprehensive electronic protectionProtection against reverse polarity battery connectionPV reverse current blockingProtection against overheating of the deviceProtection against short circuitsProtection against reverse polarity PV connectionVE.Direct data communication portVE.Direct in text mode transmits all important parameters to other devices that are coupled with the charge controller every second and thus offers the possibility of communication with additional GX Color Control system panels. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive.Scope of delivery1x Victron SCC115060210 SmartSolar MPPT 150/60-tr 12V 24V 48V 60A charge controllerOperating instructions
HM-300
Hoymiles HM-300 Microinverter module inverter
The HM-300 from Hoymiles is the perfect microwicator for your balcony power plant. The compact lightweight (only 1.98kg including the 1.35m AC cable) is suitable for solar power production with a solar panel up to an output of 380 watt peak. Just like all other Hymiles microw replacement, it is suitable for long operating hours and a wide PV module application, since its commissioning is very low (only 22V) and the DC input area of the operating voltage (16-60V) is extremely wide.
Characteristics
Minimizing the effects of e.g. shading, dust or aging by MPPT
High quality energy generation with high MPPT accuracy
System monitoring via the smartphone app S-Miles Enduser or the S-Miles Cloud (optionally with a Hymile data transmission unit DTU)
Optimal system reliability
Top efficiency of 96.7%
12 years of product guarantee
High security through integrated protective functions
easy installation
Long lifetime
6000V power protection protection
Corresponds to VDE-AR-N 4105: 2018 & EN50549-1: 2019
functionality
The Hymiles microving interchangeable converts the solar power obtained from its photovoltaic system, AC-Netz-compliant and feeds it directly into the supply network. Each Hoymiles microv signator is connected individually to a PV module of your system. This unique configuration means that each PV module is controlled by an individual maximum Peak Power Point Tracker (MPPT). This ensures that regardless of the performance of the other PV modules in the system, the maximum available service is fed into the supply network by each individual module. If individual PV modules of the system are impaired by shading, dirty, alignment or false adjustments, the HM-300 still guarantees a peak for its associated PV module. The result is the maximum possible energy production of your PV system.
Optimal reliability
Micro inverter systems are naturally more reliable than conventional inverter. The decentralized structure of a microw interchangeable system ensures that the entire PV system does not fail if the entire PV system fails. Hymiles microving signpership are designed for operation with full performance at ambient temperatures of up to +65 ° C (150 ° F). The housing of the micro inverter is designed for the outer installation and corresponds to the type of protection IP67.
Easy construction
PV systems with hymiles microving switchers are very easy to plan and install. You can install a combination of PV modules of different types, in any direction and in a desired number (maximum number of devices in series: 16). You do not need to install cumbersome conventional inverter. Each microw replacement can be installed quickly on the PV installation tile or directly under the PV module. The PV module is connected to the microw interchangeable directly on site and eliminates the risk that people are exposed to dangerously high DC voltage.
Technical specifications
Recommended module performance: up to 380W
Top performance of the voltage area: 29 ~ 48V
Consider voltage: 22V
Operating voltage area: 16 ~ 60V
Maximum input voltage: 60V
Maximum input current: 11.5a
Maximum input cocarnalide: 15a
Nominal output performance: 300VA
Nominal output voltage: 1.30A at 230V
Nominal output current: 230V
CEC weighted efficiency: 96.50%
Ambient temperature range: -40 ~+65 ° C
Dimensions (BXHXT): 182 x 164 x 29 mm
Weight: 1.98kg (including 1.35m AC cable)
Housing classification: IP67
Scope of delivery:
Hoymiles HM-300 microwores
SCC125070421
Victron SmartSolar MPPT 250/70-Tr VE.Can
The Smartsolar MPPT 250/70-Tr VE.Can from Victron Energy is part of the latest generation of smart charge controllers from the Dutch premium manufacturer. The controller processes a whopping 70A of solar power and can work flexibly with 12/24/36/48V batteries. Ultra-fast power tracking and automatic power point detection in partial shading are just two of the many highlights of this new device class. VE.Can is particularly suitable for systems with multiple solar chargers and can be used to synchronize up to 25 controllers.
In comparison to the BlueSolar series, the Bluetooth module is already permanently integrated into the controller in the Smartsolar family, making the smart dongle superfluous with this device. Another new feature is the optional LCD display, which can simply be attached to the SmartSolar 250/70-Tr VE.Can as required. The display then provides all the important information about the controller. If required, the MPPT WireBox-L Tr from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable entries and connection terminals of the controller, protecting them from external influences and contact.
Special product features Ultra-fast MPP trackerAutomatic detection of the MPP voltage with partial shadingFixed integrated Bluetooth moduleOptional LCD display availableVE-Can, the solution for multiple controllersIntegrated VE.Direct & VE.Can data communication port for connectionParallel operation with other VE.Can controllers possibleAdjustable constant charge voltageAdjustable float charge voltageSuitable for all AGM, GEL, lead-acid, calcium-calcium and calcium-calcium batteries;ure calcium-calcium and lithium batteriesFully programmable charging algorithmsIntegrated protection against battery polarity reversalMulti-stage and adaptive charging algorithmRemote switching on and off possible via 2-pin plugIntegrated temperature sensorProgrammable relayData communication via VE.Direct and Bluetooth moduleModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time.VE.Can: the solution for multiple controllersWith VE.Can or Bluetooth, up to 25 or 10 charge controllers can be connected to the SmartSolar controller. up to 10 charge controllers can be connected in series for synchronous charging and connected to a Color Control GX or another GX device.Each controller can be monitored individually, for example on a Color Control GX and on the VRM website (VE.Can) or on a smartphone or iPad (Bluetooth)
Automatic detection of the maximum power point in the event of partial shadingIn the event of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimum MPP. The innovative algorithm of the SmartSolar device will always maximize the energy yield by adjusting to the optimal MPP.
High-speed MPP trackerIn particular in overcast conditions, when light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Comprehensive electronic protectionProtection against reverse battery connectionPV reverse current blockingProtection against overheating of the deviceProtection against short circuitsProtection against reverse PV connectionVE.Direct data communication portVE.Direct in text mode transmits all important parameters to other devices connected to the charge controller every second and thus offers the option of communicating with additional GX Color Control system panels. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. Technical dataNominal charging current 70AMaximum PV open-circuit voltage: 250VHigh maximum efficiency of 99%Maximum PV power: 12V 1000W / 24V 2000W / 48V 4000WProtection class IP 43 (electronic components) and protection class IP 22 (connection area)Weight: 3kgDimensions: 200x250x95mmScope of delivery1x Victron SCC125070421 SmartSolar MPPT 250/70-Tr 12V 24V 36V 48V 70A charge controller1x operating instructions
PMR482602020
Victron Multi RS Solar 48/6000/100-450/100 Dual Tracker - Hybrid inverter/charger
Hybrid inverter/chargerThe Multi RS Solar 48/6000 is an inverter/charger for 48 V & 6 kVA with 450 VDC 4 kWp PV input.
Combination of inverter, AC charger and solar MPPTThe inverter generates a perfect sine wave that is capable of supplying devices with high power. It also works on both sides, i.e. it charges the battery with excess solar power or alternating current or converts it if necessary.
Large MPPT voltage range80 - 450 VDC, with a PV switch-on voltage of 120 VDC.
Lightweight, efficient and quietThanks to high-frequency technology and a new design, this powerful inverter weighs only 11 kg. In addition, it has excellent efficiency, low standby power and very quiet operation.
Display, Bluetooth and VictronConnect appThe display reads the battery, inverter and solar parameters. The same parameters can be accessed with a smartphone or other Bluetooth-enabled device via the VictronConnect app.
Expandable PV capacity coupled to both AC and DCThe integrated PV capacity of 4 kWp can be expanded by adding solar chargers to the system, for example our Smart Solar chargers, including the Smart Solar RS models. When connected to a VE.Can grid, all battery charges are carried out simultaneously and in a coordinated manner.Alternatively, the PV capacity can be expanded by installing PV inverters whose output power is automatically controlled by the integrated frequency shift control.
InterfacesVe.Can connection to a GX device for remote system monitoring, data logging and firmware updates. VE.Direct connection to a GlobalLink 520 for remote data monitoring.
E/A connectionsProgrammable relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS.