Solar Device Combinations
PMR482602020
Victron Multi RS Solar 48/6000/100-450/100 Dual Tracker - Hybrid Inverter/Charger
Hybrid-Wechselrichter/LadegerätDer Multi RS Solar 48/6000 ist ein Wechselrichter/Ladegerät für 48 V & 6 kVA mit 450 VDC 4 kWp PV-Eingang.
Kombination aus Wechselrichter, Wechselstromladegerät und Solar MPPTDer Wechselrichter erzeugt eine perfekte Sinuswelle, die in der Lage ist, Geräte mit hoher Leistung zu versorgen. Er funktioniert außerdem beidseitig, d. h. er lädt bei überschüssigem Solarstrom oder Wechselstrom die Batterie auf oder wandelt diesen bei Bedarf um.
Großer MPPT-Spannungsbereich80 - 450 VDC, mit einer PV-Einschaltspannung von 120 VDC.
Leicht, effizient und leiseDank der Hochfrequenztechnik und eines neuen Designs wiegt dieser leistungsstarke Wechselrichter nur 11 kg. Darüber hinaus hat es einen ausgezeichneten Wirkungsgrad, eine geringe Standby-Leistung und einen sehr leisen Betrieb.
Display, Bluetooth und VictronConnect AppDas Display liest die Batterie-, Wechselrichter- und Solarparameter ab. Auf die gleichen Parameter kann mit einem Smartphone oder einem anderen Bluetooth-fähigen Gerät über die VictronConnect-App zugegriffen werden.
Erweiterbare PV-Kapazität, sowohl mit Wechselstrom als auch mit Gleichstrom gekoppeltDie integrierte PV-Kapazität von 4 kWp kann durch Hinzufügen von Solarladegeräten zum System erweitert werden, zum Beispiel durch unsere Smart Solarladegeräte, einschließlich der Smart Solar RS-Modelle. Bei Anschluss an ein VE.Can-Netz werden alle Batterieladungen simultan und in koordinierter Weise durchgeführt.Alternativ kann die PV-Kapazität durch die Installation von PV-Wechselrichtern erweitert werden, deren Ausgangsleistung automatisch durch die integrierte Frequenzverschiebungssteuerung gesteuert wird.
SchnittstellenVe.Can-Anschluss an ein GX-Gerät zur Systemüberwachung, Datenprotokollierung und Firmware-Aktualisierung aus der Ferne. VE.Direct-Verbindung zu einem GlobalLink 520 zur Datenfernüberwachung.
E/A-VerbindungenProgrammierbare Relais-, Temperatursensor- und Spannungssensoranschlüsse. Der Ferneingang kann auch so konfiguriert werden, dass er das Victron smallBMS akzeptiert.
PIN482601000
Victron inverter RS 48/6000 230V Smart Solar
The inverterInverter RS Smart Solar Victron Energy is a combination of a powerful 48VDC, 6KVA 230VAC inverter and a high-voltage solar loader with 80-450 VDC, 4 kW Mppt. Thanks to its modern design and high-frequency technology, the inverter weighs only 10 kg and has an excellent efficiency, low standby performance and very quiet operation. The inverter creates a perfect sine wave that is able to supply devices with high performance. It is fed by a bidirectional DC-DC converter, which either charges the battery when excess solar energy is available or converted by the battery if it is needed.The inverter is equipped with a display to display battery, inverter and solar loading details. These parameters can also be read out by the VictronConnect app via Bluetooth. In addition, the inverter has a VE.Direct-and a Ve.CAN port for connection to a GX device for system monitoring.
CharacteristicsNet-independent solar inverterCombination of inverter, bidirectional DC DC converter and MPPTLarge MPPT voltage range: 80-450VDC, PV start voltage 120VDCLight, efficient and quietVe.can and ve.direct connectionBuilt-in PV isolatorE/A connectionsLight, efficient and quiet
Thanks to the high frequency technology and a new design, this powerful inverter weighs only 10 kg. In addition, it has an excellent efficiency, low standby performance and very quiet operation.
Display and BluetoothThe display reads the battery, inverter and solar loader parameters. The same parameters can be accessed with a smartphone or another Bluetooth-enabled device. In addition, Bluetooth can be used to set up the system and change settings with VictronConnect.
Technical specificationsInverter:Input voltage area: 38-64V DCOutput voltage: 230V AC ± 2%, frequency: 50 Hz ± 0.1%Output power: Linear rises from 4800W at 46VDC to 5300W at 52VDCTop performance: 9000W for 3 secondsCharger:Constant charging voltage: 57.6 VDCConservation charging voltage: 55.2 VDCMax. Charging current: 100aBattery temperature sensor: yesGeneral:Operating temperature range: -40 ° C - +65 ° CAir humidity: max. 95% (non -condensing)Protection class: IP21Weight: 11 kgDimensions: 425 x 440 x 125 mm
Tip
PMP482307010
Victron Easysolar-II 48/3000/35-32 mppt 250/70 GX
TheVictron Easysolar-II 48/3000/35-32 mppt 250/70 GX device combination Victron Energy combines an inverter/charger, a solar loader and a GX device. The elements are preloaded and integrated in a single unit. This simplifies most installations and saves time and money.
Components- Multiplus II inverter/charger-SmartSolar Mppt 250/70-TR solar loader- GX device with 2x 16 characters displayDisplay and Wi-FiThe display shows parameters for battery, inverter and solar loader. The parameters can be accessed with a smartphone or another Wi-Fi-enabled device. Wi-Fi can also be used to set up the system and change settings.
Solar loaderThe DC output of the SmartSolar Mppt is switched in parallel to the DC connection of the Multiplus II inverter/charger. The on/off mechanism of the Multiplus-II also controls the SmartSolar Mppt
GX deviceThe integrated GX device includes:-A BMS-CAN interface. This can be used to connect to a compatible battery managed by the CAN bus. Note that this is not a Ve.can-compatible connection.- a USB connection- an Ethernet connection- a Ve.direct connectionThe GX device controls the Multiplus-II and the SmartSolar with a Ve.Bus and a Ve.Direct connection.
Technical specificationsInverter: - Input voltage area 38-66V - Output voltage 230 VAC - Cons. Output power 3000W, top performance 5500WCharger: - Input voltage area 187-265 VAC - Entrance frequency 45-65Hz - Max. Batterieladestrom 35aSolar loader: - Max. Output current 70a - Max. PV performance 4000W - Max. PV empty voltage 250V - Constant charging voltage 57.6VInterfaces: BMS-CAN, USB, Ethernet, Ve.direct, Wi-FiProtection class: IP21Dimensions: 506 x 275 x 237 mmWeight: 26kg
PMP482507010
Victron Easysolar-II 48/5000/70-50 mppt 250/100 GX
TheVictron Easysolar-II 48/5000/70-50 mppt 250/100 GX Victron Energy combines an inverter/charger, a solar loader and a GX device. The elements are preloaded and integrated in a single unit. This simplifies most installations and saves time and money.
Components-Multiplus II inverter/charger-SmartSolar Mppt 250/100-TR solar loader control- GX device with 2x 16 characters displaySolar charging controller: Smartsolar Mppt 250/100-TR The integrated loading controller comes from the SmartSolar series of Victron and guarantees maximum yields with the ultra -fast MPPT procedure. Especially when the sky is covered, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield compared to PWM charging controls by up to 30 % and compared to slower MPPT regulators by up to 10 %.Critical partial shading of the solar modules Is recognized by the MPP controller and a new operating point is being sought so that even and the most unfavorable circumstances can still be achieved. The DC output of the SmartSolar Mppt is switched in parallel to the DC connection of the Multiplus II inverter/charger. The in/off mechanism of the Multiplus-II also controls the SmartSolar.
Multiplus II 48/5000/70-50 inverter and battery charger The multiplus-II 48/5000/70-50 from Victron is a device combination of 4000 W Sinus inverter and Battery charger. The smart integrated battery charger makes impressive 70 A so that the batteries can be loaded extremely quickly if land/network current is available. The Sinus voltage converter integrated in the Multiplus transforms the 48 V DC from the battery into a 230 V AC voltage. Thanks to the real sine wave, the quality of the voltage is also perfect for sensitive electronic devices.
GX deviceThe integrated GX device includes:-A BMS-CAN interface. This can be used to connect to a compatible battery managed by the CANBUS. Note that this is not a Ve.Cankomatibled connection. - a USB connection - an Ethernet connection - a Ve.direct connectionThe GX device controls the Multiplus-II and the SmartSolar with a Ve.Bus and a Ve.Direct connection.
Advertisement and wifiThe display shows parameters for battery, inverter and solar loader. The parameters can be accessed with a smartphone or another Wi-Fi-enabled device. Wi-Fi can also be used to set up the system and change settings.
The following properties are characterized by the high-end device:- 4000 W continuous output AC, 9000 W peak output - 48 V battery system voltage - inverter with pure sinus, suitable as a UPS - Max. 5800 W PV performance - Charge of the main battery with up to 70 a - Transfer switch with 50 a - Color Control display for settings and display of system information
Technical specifications:Inverter: - Input voltage 38-66V - Output voltage 230 VAC - Kont. Output power 4000W - Top performance 1000W - Transfer switch 100a - Max. Effect 95% Charger: - Input voltage: 187-265 VAC - Entrance frequency 45-65 Hz - Constant charging voltage 57.6V - charging current 70a Solar loader: - Mppt 150/100-MC4 - Max. Output current 100A - Max. PV performance 5800W - Max. Effect 98% - Constant charging voltage 57.6V Operating temperature range: -40 ° C - +65 ° C Protection class: IP21 Dimensions: 604 x 323 x 253mm Weight: 39 kg
013705
Offgridtec® IC-48/5000/80/60 combi 5000W inverter 80A MPPT charge controller 60A charger 48V 230V
The IC-48/5000/80/90 from Offgridtec (MPN 013705) is a new device combination that combines an inverter, a battery charger and an MPPT charge controller. The device is ideal for energy storage as it integrates grid charging, solar charging and AC output. The powerful multi-core chip in the product with the advanced control algorithm enables intelligent management of the system. The device is suitable for battery systems with 48V voltage and battery types AGM, GEL, FLD and LiFePO4. The integrated PFC technology achieves high power factor of AC-DC loads and reduces grid capacity usage
Important properties: Fully intelligent digital energy storage equipment Advanced MPP tracking technology Fully digitally controlled AC-DC charging modules High output voltage stability Three charging modes and two output modes Non-battery mode: simultaneous charging with solar (standard) and mains supply (assist) LCD display to show various system parameters Multiple LED indicators for dynamic status indication Supports cold and soft start All digital double closed loop control (transfer switch) RS485 isolated communication interface Optional BMS link connector Different modes for a variety of applications The device has a total of three charging modes. Priority for solar operation can be set, a combination of mains and solar operation or pure solar operation. The AC output modes can be selected between supply and inverter priority. In order to maximize the solar energy utilization, the user can select the energy sources according to actual needs and use the utility flexibly as a supplement. The IC unit can increase the guaranteed power supply rate of the system, which is suitable for solar power, utility/oil generator hybrid systems.
Technical features IC-48/5000/80/60: Suitable for battery voltage: 48V/DC Battery input voltage range: 43.2-64V/DC Degree of protection: IP30 Relative humidity: <95% (NC) Operating ambient temperature: -20°C - +50°C (full input and output power) Dimensions: 642.5 x 381.6 x 149mm Weight: 19kg Inverter with 5000W continuous output The DC-AC inverter module is based on a fully digital and intelligent design. It uses advanced SPWM technology, outputs pure sine wave and converts 48V/DC to 220/230V/AC. The module is suitable for AC loads of household appliances, power tools, electronic audio and video equipment and many other applications. Thanks to the innovative voltage, current and power control with multiple control loops, the device has a good, dynamic response behavior, high resistance to voltage spikes and high operational reliability.
Technical features:
Continuous power output: 5000W Peak power (3s): 8000W Output voltage range: 220V -6%~+3% / 230V -10%~+3% Output frequency: 50/60 ±0.2Hz Output Wave: Pure Sine Wave Max. rated power efficiency: 91% Transfer time mains to inverter: 10ms Transfer time inverter to mains: 15ms MPPT charge controller with 80A max. PV charging current The charge controller module uses the latest optimized MPPT technology. This process can help to maximize the solar yield, as the charge controller always gets the maximum out of the performance curve of the solar modules under changing conditions.
Technical features:
Max. PV open circuit voltage: 500V (at min. operating ambient temperature) Max. PV open circuit voltage: 440V (at 25°C ambient temperature) Max. PV input power: 4000W Max. PV charging current: 80A Tracking efficiency: >99.5% Temperature Compensation Coefficient: -3mV /°C / 2V (default) Battery charger with 60A max. charging current The AC-DC charging unit adopts full digital double control loop and has high response speed and stability. A wide AC input voltage and charging current limit can be set. This module has full protection functions on input and output. With utility bypass charging function, the module can directly power the load while charging the battery.
Technical features:
Mains input voltage: 176 – 246 V/AC (standard) Mains input frequency: 40 – 65 Hz Max. mains charging current: 60A Extensive protection functions The IC device series has a wide range of protective functions:
PV limit current & reverse polarity reverse flow at night AC-IN over & under voltage Utility input overcurrent Battery overvoltage & overdischarge, as well as reverse polarity Load output short circuit & overload device overheating Scope of delivery:
1x Offgridtec IC-48/5000/80/60 device combination 1x user manual Degree of protection (IP) IP30 Battery nominal voltage 48V Rated output voltage 220VAC (-6%~+3%); 230VAC (-10%~+3%) Frequency range 50Hz / 60Hz ±0.2% Dimensions 642.5 x 381.6 x 149mm Weight 19kg Temperature range -20°C to 50°C Continuous power 5000W Sine wave pure sine wave Manufacturer Offgridtec
PMP242307010
Victron Easysolar-II 24/3000/70-32 mppt 250/70 GX
TheVictron Easysolar-II 24/3000/70-32 mppt 250/70 GX Combines an inverter/charger, a solar loader and a GX device. The elements are preloaded and integrated in a single unit. This simplifies most installations and saves time and money.
Components:Multiplus II inverter/chargerSmartSolar Mppt 250/70-TR solar loaderGX device with 2x 16 characters displayDisplay and Wi-FiThe display shows parameters for battery, inverter and solar loader. The parameters can be accessed with a smartphone or another Wi-Fi-enabled device. For setting up and changing system and settings.
Solar loaderThe DC output of the SmartSolar Mppt is switched in parallel to the DC connection of the Multiplus II inverter/charger. The on/off mechanism of the Multiplus-II also controls the SmartSolar Mppt
GX device- BMS-CAN interface. This can be used to connect to a compatible battery managed by the CAN bus. Note that this is not a Ve.can-compatible connection.-USB connection, Ethernet connection, VE.Direct connectionThe GX device controls the Multiplus-II and the SmartSolar with a Ve.Bus and a Ve.Direct connection.
Technical specificationsInverter: - Input voltage area 38-66V- Output voltage 230 VAC- Cons. Output power 3000W- Top performance 5500WCharger: - Input voltage area 187-265 VAC- Entrance frequency 45-65Hz - Max. Batterieladestrom 70aSolar loader: - Max. Output current 70a - Max. PV performance 4000W - Max. PV empty voltage 250V - Constant charging voltage 57.6VInterfaces: BMS-CAN, USB, Ethernet, Ve.direct, Wi-FiProtection class: IP21Dimensions: 506 x 275 x 237 mmWeight: 26kg
013700
Offgridtec® IC-24/3000/100/80 combi 3000W inverter 100A MPPT charge controller 80A charger 24V 230V
Offgridtec's IC-24/3000/100/80 (MPN 013700) is a new device combination that combines an inverter, a battery charger and an MPPT charge controller. The device is ideal for energy storage as it integrates grid charging, solar charging and AC output. The powerful multi-core chip in the product with the advanced control algorithm enables intelligent management of the system.
The device is suitable for battery systems with 24V voltage and battery types AGM, GEL, FLD and LiFePO4. The integrated PFC technology achieves high power factor of AC-DC loads and reduces grid capacity usage
Important properties:
Fully intelligent digital energy storage equipment
Advanced MPP tracking technology
Fully digitally controlled AC-DC charging modules
High output voltage stability
Three loading modes and two output modes
Non-battery mode: simultaneous charging with solar (standard) and mains supply (assist)
LCD display to show various system parameters
Multiple LED displays for dynamic status display
Supports cold and soft start
All digital double closed loop control (transfer switch)
RS485 isolated communication interface
Optional BMS link connector
Different modes for a variety of applications
The device has a total of three charging modes. Priority for solar operation can be set, a combination of mains and solar operation or pure solar operation. The AC output modes can be selected between supply and inverter priority. In order to maximize the solar energy utilization, the user can select the energy sources according to actual needs and use the utility flexibly as a supplement. The IC unit can increase the guaranteed power supply rate of the system, which is suitable for solar power, utility/oil generator hybrid systems.
Technical characteristics IC-24/3000/100/80:
Suitable for battery voltage: 24V/DC
Battery input voltage range: 21.6 - 32 V/DC
Protection class: IP30
rel. Humidity: <95% (N.C.)
Operating ambient temperature: -20°C - +50°C (full input and output power)
Dimensions: 642.5 x 381.6 x 149 mm
Weight: 19 kg
Inverter with 3000W continuous power
The DC-AC inverter module adopts a fully digital and intelligent design. It uses advanced SPWM technology, outputs pure sine wave and converts 24V/DC to 220/230V/AC. The module is suitable for AC loads of household appliances, power tools, electronic audio and video equipment and many other applications. Thanks to the innovative voltage, current and power control with multiple control circuits, the device has good, dynamic response behavior, high resistance to voltage spikes and high operational reliability.
Technical characteristics:
Continuous output power: 3000W
Peak power (3s): 6000W
Output voltage range: 220V -6%~+3% / 230V -10%~+3%
Output frequency: 50/60 ±0.2Hz
Output wave: Pure sine wave
Max.Rated power efficiency: 91%
Transfer time mains to inverter: 10ms
Transfer time inverter to mains: 15ms
MPPT charge controller with 100A max PV charging current
The charge controller module uses the latest optimized MPPT technology. This process can help to maximize the solar yield, as the charge controller always gets the maximum out of the performance curve of the solar modules under changing conditions.
Technical characteristics:
Max. PV open circuit voltage: 450V (at min. operating ambient temperature)
Max. PV open circuit voltage: 395V (at 25°C ambient temperature)
Max. PV input power: 4000W
Max. PV charging current: 100A
Tracking efficiency: >99.5%
Temperature compensation coefficient: -3mV /°C / 2V (default)
Battery charger with 80A max. charging current
The AC-DC charging unit adopts full digital double control loop and has high response speed and stability. A wide AC input voltage and charging current limit can be set. This module has full protection functions on input and output. With utility bypass charging function, the module can directly power the load while charging the battery.
Technical characteristics:
Input voltage of the supply network: 176 - 246 V/AC (standard)
Input frequency of the supply network: 40 - 65 Hz
Max.Mains charging current: 80A
Extensive protection functions
The IC device series has various protection functions:
PV limit current & reverse polarity
Back current at night
AC-IN over & under voltage
Utility input overcurrent
Battery overvoltage & overdischarge, as well as reverse polarity
Load output short circuit & overload
Device overheating
Scope of delivery:
1x Offgridtec IC-24/3000/100/80 device combination
1x operating instructionsdata sheet
degree of protection (IP)
IP30
frequency range
50Hz / 60Hz ±0.2%
Dimensions
642.5x381.6x149mm
weight
19kg
Battery voltage
24V
Temperature range
-20°C to 50°C
Continuous power
3000W
sine wave
pure sine wave
manufacturer
Offgridtec
Rated output voltage
220VAC (-6%~+3%); 230VAC (-10%~+3%)
013695
Offgridtec® IC-12/800/30/20 combination 800W inverter 30A MPPT charge controller 20A charger 12V 230V
Offgridtec's IC-12/800/30/20 (MPN 013695) is a new device combination that combines an inverter, a battery charger and an MPPT charge controller. The device is ideal for energy storage as it integrates grid charging, solar charging and AC output. The powerful multi-core chip in the product with the advanced control algorithm enables intelligent management of the system.
The device is suitable for battery systems with 12V voltage and the battery type lead battery (lead-acid, VRLA-AGM, -GEL). Furthermore, the IC offers the function for adjusting the charging ratio of purchased electricity and solar systems for various applications.
Important properties:
Fully intelligent digital energy storage equipment
Advanced MPP tracking technology
Fully digitally controlled AC-DC charging modules
High output voltage stability
Four loading modes and two output modes
LCD display to show various system parameters
Supports cold and soft start
RS485 isolated communication interface
Different modes for a variety of applications
The device has a total of four charging modes. Priority can be set for mains operation or solar operation, a combination of mains and solar operation or pure solar operation. You can choose between battery and power supply for the output modes.
Technical characteristics IC-12/800/30/20:
Suitable for battery voltage: 12V/DC
Battery input voltage range: 10.8 - 16 V/DC
Protection class: IP30
rel. Humidity: <95% (N.C.)
Operating ambient temperature: -20°C - +50°C (full input and output power)
Dimensions: 386 x 300 x 126mm
Weight: 7.3 kg
Inverter with 800W continuous power
The DC-AC inverter module adopts a fully digital and intelligent design. It uses advanced SPWM technology, outputs pure sine wave and converts 12V/DC to 220/230V/AC. The module is suitable for AC loads of household appliances, power tools, electronic audio and video equipment and many other applications. Thanks to the innovative voltage, current and power control with multiple control circuits, the device has good, dynamic response behavior, high resistance to voltage spikes and high operational reliability.
Technical characteristics:
Continuous output power: 800W
Output power (15min): 1000W
Overload output power (5s): 1600W
Max. Surge power: 2000W
Output voltage range: 220V -6%~+5% / 230V -10%~+5%
Output frequency: 50/60 ±0.1Hz
Output mode: single phase
Output wave: Pure sine wave
Max. Efficiency: 91%
Transfer time: 20ms (resistive load)
MPPT charge controller with 30A max. PV charging current
The charge controller module uses the latest optimized MPPT technology. This process can help to maximize the solar yield, as the charge controller always gets the maximum out of the performance curve of the solar modules under changing conditions.
Technical characteristics:
Max.PV open circuit voltage: 60V (at min operating ambient temperature)
Max. PV open circuit voltage: 46V (at 25°C ambient temperature)
Max. PV input power: 390W
Max. PV charging current: 30A
Charge conversion efficiency: <98%
Temperature compensation coefficient: -3mV /°C / 2V (default)
Battery charger with 20A max. charging current
The AC-DC charging unit adopts full digital double control loop and has high response speed and stability. A wide AC input voltage and charging current limit can be set. This module has full protection functions on input and output. With the utility bypass charging function, the module can directly power the load while charging the battery.
Technical characteristics:
Suitable for nominal battery voltage: 12V/DC
Operating voltage range: 160V/AC~280V/AC
Starting voltage range: 170V/AC~270V/AC
Max. Charging current: 20A
Extensive protection functions
The IC device series has various protection functions:
PV limit current, short circuit, reverse polarity
Backflow blocking device
AC-IN over & under voltage
Battery Over Voltage & Over Discharge
Load output short circuit & overload
Device overheating
Scope of delivery:
1x Offgridtec IC-12/800/30/20 device combinationdata sheet
degree of protection (IP)
IP30
frequency range
50Hz / 60Hz ±0.1%
Dimensions
386×300×126mm
continuous power
800W
weight
7.3kg
Manufacturer
Offgridtec
Battery nominal voltage
12VDC
Temperature range
-20°C to 50°C
sine wave
pure sine wave
Rated output voltage
220VAC (-6%~+5%); 230VAC (-10%~+5%)
.
SIN121251100
Victron Sun inverter 12/250-15 IEC
TheSun inverter Combines a Sinus inverter and a PWM solar charger in a housing and is easy to install with a minimum of cabling.With the inverter you can operate household appliances that need 230 VAC via leisure or car batteries with a voltage of 12 V.The solar charger ensures that the batteries are loaded by the energy obtained by their solar panels. The loading algorithm can be programmable.The parameters of the inverter and the solar loader can be read out with the VictronConnect app via Bluetooth. In addition, the inverter has a VE.Direct port to connect to a GX device or global link 520 for system monitoring.Model:12V | 250VA Proven reliabilityThe complete bruise with a ring transformer panel has also proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).High switch -on powerThis is required to switch on consumers such as voltage formers for LED lamps, halogen lamps or power tools.Eco modeIn ECO mode, the inverter switches to standby mode when the load has a preceded value (minimum load: 15 W). In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset limit, the inverter remains on.PWM solar chargerThe solar charger ensures that the batteries are loaded by the energy obtained by their solar panels. The loading algorithm can be programmable.Remote-controlled input/outputThe Phoenix inverter Control Ve.direct Remote Panel (not included) can be used for remote-controlled switching on and off the inverter. Alternatively, a remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pin connector.LED diagnosisPlease note the description in the manual.BluetoothThe parameters of the inverter and the solar loader can be read out and monitored with the VictronConnect app via Bluetooth.Ve.direct communication connectionThe VE.Direct connection can be used for connection to a GX device, with global link 520 for monitoring via the VRM portal or with the VictronConnect app for monitoring or configuration with a computer.Monitoring via the VictronConnect app or a GX device:• Input and output voltage of the inverter and % load• Solar power, voltage and current strength• Operating condition and alarmsFully configurable via the VictronConnect app:• Alarm triggering with low battery voltage and reset level• Switching off with low battery voltage and restarting stages• Dynamic shutdown: load -dependent shutdown limit• Output voltage 210 - 245 V and frequency 50 or 60 Hz• Eco mode on/off and Eco mode Sense level• Batterieladestrom, algorithm and tensions• Temperature compensation for battery charging or shutdown of the level at low temperatureLoad switching on another change of alternating current: the automatic transfer switchWe recommend our Filax Automatic Transfer Switch for our low -performance inverter. With the Filax, switching takes place very quickly (in less than 20 milliseconds), so that an interruption -free operation of computers and other electronic devices is guaranteed.DC and PV connections with screw terminalsNo special cable connections or tools are required for installation.Available with an IEC-320 socketAn IEC-320 connector is included.
CEP121621000
Victron Easysolar 12/1600/70-16 mppt 100/50
TheVictron Energy Easysolar 12/1600/70-16 mppt 100/50 is a high-end all-in-one solar solution that combines four important components of a good solar system: the MPPT Smart-Solar 100/50, the inverter/battery charger multiplus 12/1600/70 and, around To be able to use the whole thing comfortably, an AC electricity distribution with residual current control switch and two 16A fuses + 10a fuses for 4 separate circuits. The installation of the Victron Easysolar is easy and it is only a little necessary to cable, which reduces the installation costs to a minimum. Victron underlines the quality of the integrated components with the long product guarantee of 5 years.Components of the Easysolar 12/1600/70-16:Mppt loader SmartSolar 100/50 50a 12VThe Victron MPPT 100/50 belongs to the large family of the SmartSolar Mppt loader and, like its big siblings, it already offers ultra-fast power tracking and can thus increase the yield of its solar system. Especially when the sky is covered, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield, compared to PWM charging controls, around 30 % and, compared to slower MPPT regulators, up to 10 %. In addition, the 100/50 has some other innovative technologies such as VE.Direct Communication.Multiplus 12/1600/70 Sinus inverter + battery deviceThe Multiplus C 12/1600/70 from Victron is a device combination of 12V 1300W sinus inverter and battery charger. The permanently integrated battery charger does a considerable 70a which can also be fully charged even large batteries if the land/network current is available. The 12V Sinus inverter installed in Multiplus brings a considerable permanent output of 1300W and copes with peak currents of up to 3000W. With the high quality of the AC electricity, you have to make no compromises when choosing the devices.
Integrated 16A network transfer switchThe 16a transfer switch built into the multiplus ensures maximum flexibility. The Easysolar 12/1600/70-16 can be used for numerous applications in the network and offgrid area, but also for motorhome owners who want to implement their power supply with a high-quality system. It is just as suitable for UPS solutions (uninterruptible power supply) as well as for network -coupled self -consumption systems that can only be used by the network operator if the battery capacity is no longer sufficient or other programmable events have taken place.
Integrated AC distributionThe alternating current distribution consists of a residual current circuit breaker (30 MA/16 A) and four AC outputs, which are secured by two 10 a and two 16 A fuses. A 16 A output is controlled by the AC input: it only switches on when alternating current is available.
Ve.bus communication sportThe Ve.Bus communication sport is extremely powerful and combines the Easy Solar with numerous other components of Victron such as the Global Remote GSM for worldwide remote control or the Monitor Color Control GX system with color display.In addition, numerous free software programs are available for the Ve.Bus for setting up and controlling VE.Bus devices.
Technical features at an overview- 1300W continuous output and 3000W peak output, for 12V battery voltage- Device combination made of inverter with a transfer switch and 70a battery charger- delivers the purest 230V sine voltage and a clean 50Hz frequency- Ve.Bus communication sport ensures extensive possibilities of networking, system integration, configuration and control- PowerControl function enables working with limited generator performance as well as limited land or network electricity- Power assist function enables “increase in performance” by generators and land connection support if necessary- can be used as a UPS solution for interruption -free power supply- For network -coupled self -consumption systems that can only be used, which only pull electricity from the network operator if the battery capacity is no longer sufficient or other programmable events have taken place- Compatible with numerous Victron tax and display panels- Programmable relay on the inverter-Integrated battery temperature sensor on the inverter for temperature equalization of the battery loader-PV connection via three phase operation with identical multiplus interim judges possible- Ultra-fast MPP tracker of the latest generation ensures the best possible yield even with a covered sky- Automatic detection of the MPP Tension In the case of partial shading, a further earnings improvement compared to "simpler" MPPT loader- High overall efficiency of 92%- Fully programmable loading algorithms that can later be activated and switched manually via a switch on the housing- nominal charging current 50a, 100V maximum PV empty voltage- 700W maximum PV power at 12V- Integrated protection against battery reolving- Multi-stage and adaptive loading algorithm- Integrated temperature sensor compensates for conservation and constant charging voltage after temperature- Complete AC distribution with 2 16A fuses, 2x 10a fuse and an residual current circuit breaker make the Easysolar very safe- 5 years of product guarantee- Suitable for all common battery types and lithium batteries-Day/night-time control and light dimmer Features
CEP121620000
Victron Easyplus C 12/1600/70-16
Victron Easyplus C 12/1600/70-16 - The multifunctional power supplyThe Phoenix Easyplus is a high-quality multi-purpose device for power supply with a powerful sinus converter, a special battery loader, an ultra-fast switch and an alternating current distribution, all summarized in a compact and light housing. The new system was developed for those users who appreciate the advantages of a complete energy supply system and do not want to plague with complicated installation problems and cumbersome technical specifications.Optimal comfort and maximum securityThe Easyplus ensures an uninterrupted power supply where and when it is necessary. The unique Powerassist® Functionaliä̈t ensures the necessary increase in performance from the battery current if the land or generator current is limited. The integrated residual current circuit breaker (RCD Residual Current Device) ensures maximum security.12 volt 1600 VA inverter with sinus wave (3000 watts of peak performance) 70 A charger including 4 A conservation load above the starter batteryUnique Powerassist® technology protects the land or generator power source from overloading by adding an additional inverter current if necessary.4-stage, adaptive charging technology for a quick and accurate loading of the batteryThe alternating current distribution consists of an residual current circuit breaker (30 MA/16 A) and four AC outputs, which are secured by two 10 a and two 16 A fuses.A 16 A output is controlled by the AC input: it only switches on when alternating current is available. Fearing current circuit breaker (30 MA/16 a) at the AC outputInterruption-free system: seamless switching between agricultural/generator and inverter flow.Battery cables containDimensionsHeight: 510 mm width: 214 mm depth: 110mm weight: 11.7 kg
CEP241621010
Victron Easysolar 24/1600/40-16 mppt 100/50
TheVictron Energy Easysolar 24/1600/40-16 mppt 100/50 is a high-end all-in-one solar solution that combines four important components of a good solar system: the MPPT Smart-Solar 100/50, the inverter/battery charger multiplus 24/1600/40 and, to To be able to use the whole thing comfortably, an AC electricity distribution with residual current control switch and two 16A fuses + 10a fuses for 4 separate circuits. The installation of the Victron Easysolar is easy and it is only a little necessary to cable, which reduces the installation costs to a minimum. Victron underlines the quality of the integrated components with the long product guarantee of 5 years.Components of the Easysolar 24/1600/40-16:Mppt loader SmartSolar 100/50 50a 12V 24V The Victron MPPT 100/50 belongs to the large family of the SmartSolar Mppt loader and, like its big siblings, it already offers ultra-fast power tracking and can thus increase the yield of its solar system. Especially when the sky is covered, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield, compared to PWM charging controls, around 30 % and, compared to slower MPPT regulators, up to 10 %. In addition, the 100/50 has some other innovative technologies such as VE.Direct Communication.Multiplus 24/1600/40 Sinus inverter + battery deviceThe Multiplus C 24/1600/40 from Victron is a device combination of 24V 1300W sinus inverter and battery charger. The permanently integrated battery charger makes a considerable 40a which can also be fully charged even when the land/network current is available. The 24V built in Multiplus to 230V sinus inverter brings a considerable continuous output of 1300W and copes with peak currents of up to 3000W. With the high quality of the AC electricity, you have to make no compromises when choosing the devices.
Integrated 16A network transfer switchThe 16a transfer switch built into the multiplus ensures maximum flexibility. The Easysolar 24/1600/40-16 can be used for numerous applications in the network and offgrid area, but also for motorhome owners who want to implement their power supply with a high-quality system. It is just as suitable for UPS solutions (uninterruptible power supply) as well as for network -coupled self -consumption systems that can only be used by the network operator if the battery capacity is no longer sufficient or other programmable events have taken place.
Integrated AC distributionThe alternating current distribution consists of a residual current circuit breaker (30 MA/16 A) and four AC outputs, which are secured by two 10 a and two 16 A fuses. A 16 A output is controlled by the AC input: it only switches on when alternating current is available.
Ve.bus communication sportThe Ve.Bus communication sport is extremely powerful and combines the Easy Solar with numerous other components of Victron such as the Global Remote GSM for worldwide remote control or the Monitor Color Control GX system with color display.In addition, numerous free software programs are available for the Ve.Bus for setting up and controlling VE.Bus devices.
Technical features at an overview- 1300W continuous output and 3000W peak output, for 24V battery voltage- Device combination made of inverter with transfer switch and 40A battery charger- delivers the purest 230V sine voltage and a clean 50Hz frequency- Ve.Bus communication sport ensures extensive possibilities of networking, system integration, configuration and control- PowerControl function enables working with limited generator performance as well as limited land or network electricity- Power assist function enables “increase in performance” by generators and land connection support if necessary- can be used as a UPS solution for interruption -free power supply- For network -coupled self -consumption systems that can only be used, which only pull electricity from the network operator if the battery capacity is no longer sufficient or other programmable events have taken place- Compatible with numerous Victron tax and display panels- Programmable relay on the inverter-Integrated battery temperature sensor on the inverter for temperature equalization of the battery loader-PV connection via three phase operation with identical multiplus interim judges possible- Ultra-fast MPP tracker of the latest generation ensures the best possible yield even with a covered sky- Automatic detection of the MPP Tension In the case of partial shading, a further earnings improvement compared to "simpler" MPPT loader- High overall efficiency of 92%- Fully programmable loading algorithms that can later be activated and switched manually via a switch on the housing- nominal charging current 50a, 100V maximum PV empty voltage- 1400W maximum PV power at 24V- Integrated protection against battery reolving- Multi-stage and adaptive loading algorithm- Integrated temperature sensor compensates for conservation and constant charging voltage after temperature- Complete AC distribution with 2x16a fuses, 2x10a backup and an residual current circuit breaker make the Easysolar very safe- 5 years of product guarantee- Suitable for all common battery types and lithium batteries-Day/night-time control and light dimmer Features
SIN241251100
Victron Sun inverter 24/250-10 IEC
TheSun inverter Combines a Sinus inverter and a PWM solar charger in a housing and is easy to install with a minimum of cabling.With the inverter you can operate household appliances that need 230 VAC via leisure or car batteries with a voltage of 24 V.The solar charger ensures that the batteries are loaded by the energy obtained by their solar panels. The loading algorithm can be programmable.The parameters of the inverter and the solar loader can be read out with the VictronConnect app via Bluetooth. In addition, the inverter has a VE.Direct port to connect to a GX device or global link 520 for system monitoring.Model:24V | 250VAProven reliabilityThe complete bruise with a ring transformer panel has also proven itself for years. The inverters are short -circuit -resistant and protected against overheating (whether caused by overload or by the ambient temperature).High switch -on powerThis is required to switch on consumers such as voltage formers for LED lamps, halogen lamps or power tools.Eco modeIn ECO mode, the inverter switches to standby mode when the load has a preceded value (minimum load: 15 W). In standby mode, the inverter then switches on for a short period of time (regulable default setting: every 2.5 seconds). If the load exceeds a preset limit, the inverter remains on.PWM solar chargerThe solar charger ensures that the batteries are loaded by the energy obtained by their solar panels. The loading algorithm can be programmable.Remote-controlled input/outputThe Phoenix inverter Control Ve.direct Remote Panel (not included) can be used for remote-controlled switching on and off the inverter. Alternatively, a remote-controlled on/off switch can be connected with a two-pin connector or between the plus pole of the battery and the left contact of the two-pin connector.LED diagnosisPlease note the description in the manual.BluetoothThe parameters of the inverter and the solar loader can be read out and monitored with the VictronConnect app via Bluetooth.Ve.direct communication connectionThe VE.Direct connection can be used for connection to a GX device, with global link 520 for monitoring via the VRM portal or with the VictronConnect app for monitoring or configuration with a computer.Monitoring via the VictronConnect app or a GX device:• Input and output voltage of the inverter and % load• Solar power, voltage and current strength• Operating condition and alarmsFully configurable via the VictronConnect app:• Alarm triggering with low battery voltage and reset level• Switching off with low battery voltage and restarting stages• Dynamic shutdown: load -dependent shutdown limit• Output voltage 210 - 245 V and frequency 50 or 60 Hz• Eco mode on/off and Eco mode Sense level• Batterieladestrom, algorithm and tensions• Temperature compensation for battery charging or shutdown of the level at low temperatureLoad switching on another change of alternating current: the automatic transfer switchWe recommend our Filax Automatic Transfer Switch for our low -performance inverter. With the Filax, switching takes place very quickly (in less than 20 milliseconds), so that an interruption -free operation of computers and other electronic devices is guaranteed.DC and PV connections with screw terminalsNo special cable connections or tools are required for installation.Available with an IEC-320 socketAn IEC-320 connector is included.