Water
6P1531SPA0100
ISOTHERM SPA 15 Boiler 230V/750W
The Isotherm Boiler are available in 5 different sizes from 15 liters of up to 40 liters. According to the high marine quality standards, you have a stainless steel inside tank, a robust plastic container and a 6 bar safety valve.
High quality standard and an optimized price-performance ratio
Available in 5 different sizes from 15 - 40 liters
Inside tank aisi 316
6 bar safety valve
Mixing valve optionally available
Extra thick line
Outside coat made of high -quality polypropylene
Adaptable with valves and the performance of the heating element
Water connections: 1/2 "inside and outside NPT and BSP pipe thread
Heating element 750W / 230V
PVB-30
Fohermo photovoltaic water boiler 30 liters - hot water operators
With the 30l water boiler from Fothermo (MPN PVB-30) you can generate your hot water with sustainable and inexpensive solar power. The connection of the solar modules is done in a few seconds in a few simple steps and offers you a reliable hot water supply.
Product highlights
30 liters of photovoltaic hot water boilers
Warm water for the sink, the shower or the kitchen
No connection to the power grid required
Complete system with MC4 PV connections
No specialist required for the installation
Digital temperature display
1/2 "Water connection on the hot water.
Optional re -heating via the power grid possible (accessories not included in the scope of delivery)
Recommended solar performance
We recommend a solar module output of min. 300WP
Connect modules with at least 100WP power and nominal voltage 18V
Connection of max. 3 x 325WP modules in parallel
Danger:
The idle voltage of the solar modules must not exceed 42.4V. When using several modules, these must be switched in parallel, not in series
Technical specifications
Volume: 30 liters
Max. Heating power: 550W
Max. Electricity: 15.5A
Protection class: IP 24
Dimensions: 400 x 400 x 600 mm
Weight: 15 kg
Scope of delivery:
1x fechermo 30 liters of hot water boiler (PVB-30)
1x fastening set
5555
Votronic tank electrode 20 K toilet
The Votronic tank electrode 20 K-WC (HAN 5555) is a tanker for cassette toilets in motorhomes that are now considered an absolute standard. Cassette toilets are compactly constructed and have an advertisement, which unfortunately unfortunately only marks the full state. Once this has been reached, the toilet in the vehicle can no longer be used. The use of tankers in combination with votronic filling displays enable forward -looking planning of the disposal and renewal of your mobile tanks.
The essential product properties of the 20 K-WC tanker
Tanker specially designed for cassette toilets and mobile tanks
Compact, robust, waterproof (IP67)
Easy assembly, no revision opening required
With a 3-pin round plug connection to separate the tank
Complete assembly material included
Stable electrode, easy to shorten at tank height
Installation diameter 38 mm (or PG 29 thread)
Flange diameter 46.5 mm
Test mark: E-test (EMV/car directive)
Connection cable 75 cm long
Assembly from above using assembly
Loosable plug connection for tankering
Optimal in interaction with Votronic filling displays
The tanker is compatible with the following Votronic :.
Wastewater indicator S, 5313
Fecal tank advertisement S, 5315
Info Panel Pro, 5330
Info Panel Pro 24V
VPC Terra
VPC Merkur
VPC Jupiter 100 Smart Shunt, 5747
VPC Jupiter 200 Smart Shunt, 5748
VPC Jupiter 400 Smart Shunt, 5749
Solid measurement technology and simple assembly
The tank electrode 20 K-WC was further developed on the basis of the long-proven tank electrode in order to obtain a full filler indicator especially for use in cassette toilets. The compact design makes it possible to simply screw the tanker into the toilet cassette from above via the supplied assembly ring. The necessary assembly opening of 38 mm diameter is easy to produce with a hole saw. The fully resumed electronics is designed waterproof (IP67) and suitable for rough operation when rinsing the toilet cassette.
To change the cassette, the tank electrode 20 K-WC is separated from the vehicle via a solid 3-pin round connector and the plug on the cassette is fixed. In addition to the 3-pin round plug connection, the scope of delivery also includes assembly and complete assembly material.
Delivery time: 1-3 working days
Scope of delivery:
1x votronic 5555 tank electrode 20 K toilet
1004-CPVB-10
Fohermo Photovoltaic Caravan water boiler 10 liters - hot water operators
With the 10l-Caravan water boiler from Fothermo (MPN 1004-CPVB-10) you can create your hot water with sustainable and inexpensive solar power. The connection of the solar modules is done in a few seconds in a few simple steps and offers you a reliable hot water supply. With the fastening set, a vertical but also horizontal application is possible.
Product highlights
10 liters of photovoltaic hot water boilers with fastening
Warm water for your caravan
No connection to the power grid required
Complete system with MC4 PV connections
No specialist required for the installation
Digital temperature display
1/2 "Water connection on the hot water.
Anti frost: easy to drain water possible in winter.
Recommended solar performance
We recommend the connection of a 100-300WP solar module
Connection of max. 5x1500WP modules in parallel.
Easy construction
The hanging bar is securely attached to the wall using two dowels supplied. After installing the wall attachment holder, the hot water tank is attached. After hanging, the hot water tank is attached to the wall with the help of the third dowel and the third screw (hexagon screw) by the eyelet at the bottom of the housing. A borehole template is included in the product.
Technical specifications
Volume: 10 liters
Max. Heating power: 550W
Max. Electricity: 15.5A
Protection class: IP X1
Dimensions: 280 x 280 x 440 mm
Weight: 7.2 kg
Scope of delivery:
1x fechermo 10 liters of hot water boiler (1004-cpvb-10)
1x fastening set
PVB-80
Fohermo photovoltaic water boiler 80 liters - hot water operators
With the 80l water boiler from Fothermo you can generate your hot water with sustainable and inexpensive solar power. The connection of the solar modules is done in a few seconds in a few simple steps and offers you a reliable hot water supply.
Product highlights
80 liters of photovoltaic hot water boilersWarm water for the sink, the shower or the kitchenNo connection to the power grid requiredComplete system with MC4 PV connectionsNo specialist required for the installationDigital temperature display1/2 ”water connection on the hot water.Optional re -heating via the power grid possible (accessories not included in the scope of delivery)Recommended solar performance
We recommend a solar module performance of min. 600WPFor example, connection of 2-4 x 370WP solar module in parallelMax. 1500WP solar module performanceDanger: The idle voltage of the solar modules must not exceed 42.4V. When using several modules, these must be switched in parallel, not in series.
Technical specifications
Volume: 80 litersMax. Heating power: 550WMax. Electricity: 15.5AProtection class: IP 24Dimensions: 470 x 480 x 900 mmWeight: 25 kgScope of delivery:
1x fechermo 80 liters of hot water boiler (PVB-80)
PSU-24
FOHERMO PSU charger 230V / 24V
With the 230V/24V PSU charger, you can also heat your Fothermo water boiler via the power grid. So you can also bridge long bad weather periods without having to do without warm water. The device serves as a mains speech AC/DC converter, which provides a regulated DC voltage for the hot water.
Technical specifications
Compatible with FOHERMO water boilerInput voltage area: 100-240V/ACMax. Current recording: 2.5AAC connector: IEC320-C14Output voltage: 24V/DCAmbient temperature range: -10 ° C - +40 ° CScope of delivery:
1x fechermo PSU charger 230V/24V (PSU-24)
BC-03
Fothermo battery cable
With this battery cable, the Foshermo water boilers can be connected directly to a suitable battery and heated. This allows excess energy to be converted into heat in the boiler from photovoltaically charged batteries.The Fohermo boilers can be used with 12V and 24V batteries. Depending on the mode, the boiler either immediately uses the energy provided by the battery or the excess energy after the battery is fully charged.
Scope of delivery:
1x fechermo battery cable (BC-03)
PSU-12
Fohermo PSU charger 230V / 12V
With the 230V/12V PSU charger, you can also heat your Fothermo water boiler via the power grid. So you can also bridge long bad weather periods without having to do without warm water.The device serves as a mains speech AC/DC converter, which provides a regulated DC voltage for the hot water.
Technical specifications
Compatible with Fothermo 10l water boilerInput voltage area: 100-240V/ACMax. Current recording: 2.5AAC connector: IEC320-C14Output voltage: 12V/DCHeating power on the photovoltaic boiler: 62WAmbient temperature range: -10 ° C - +40 ° CScope of delivery:
1x fechermo psu charger 230V/12V (PSU-12)
10-13607-10
Johnson CM95HP circulation pump
Johnson CM95HP circulation pump, with brushless motor for continuous operationPerformance: 78 l/m / 20.6 USGPM24V brushless DC motorVoltage: 16 - 32 V38 mm and 25 mm connectionsClosureless magnetic driveEnvironmentally operational at temperatures from -40°C to +85°CLiquid operating temperature from -40°C to +100°CProtection against dry running, reverse polarity and undervoltage
Technical data:Pump housing: Black, anodized aluminiumImpeller: PA12Shaft: Stainless steelMotor: 12/24 V DC (without carbon brushes), IP67, ball-bearing mounted, with permanent magnetPump medium: Water/glycol-fermentmax. 60% glycol, fresh waterLiquid temperature: Min -40°C Max +100°CSystem pressure: Max. 2.5 barHose connection: Ø 25 mm (¾") or Ø 38 mm (1¼")Dry run: Max. 20 minutesPower consumption: Max. 315 WMounting: Universal holder for flat surfaces (included) Length: 208 mmWidth: 135 mmHeight: 162 mmWeight: 3.2 kg
32130
Sink with smoked glass cover 325x350 mm
Luxurious spüs in heavy yacht construction quality! Stainless steel basin with folding cold water tap and smoked glass cover. Please order a drain set separately if required.Material stainless steel/glass. Fixing: Is glued in.
Dimensions:
inside 298x328mm
outside 325x350mm
depth 150mm
10-13636-01
Johnson AQUA VOID ULTIMA 800 GPH 12V Bilge Pump
Johnson AQUA VOID ULTIMA bilge pump 800 GPH 12VIndustry's first and only cartridge pump with integrated wiring harness connection!
Fördermenge: 50 Liter pro MinuteSpannung: 12VHigh-flow impeller designWaterproof inline wiring harness connectionDurable thermoplastic housing design with removable motor sledWaterproof motor, shaft made of stainless steel 316 and permanently lubricated double bearings;impact valves Straight or 90-degree Dura-Port outlets Molded T-slotClip-in basket
Johnson Pump's new line of bilge pumps with new technology and improved performance.With its industry-first high-speed motor connection and new reinforced click basket, it simplifies cleaning and installation and is convenient and efficient. Its improved motor ensures reliability and performance in all conditions. Experience carefree boating with Aqua Void.The bilge pump can be combined with either an AS888 automatic switch, an electronic float switch or the Ultima Switch for automatic operation.
Technical details:Power: 50L/minConnection: Straight/90°. 19mm hose connection including non-return valveVoltage: 12VCurrent consumption: 3.7AMaximum flow height: 4.4mWidth 2.75" (70mm)Height 4.69" (119mm)Length 5.24" (133mm)Weight 12.6oz (0.36kg) 800 GPH
6P40B1SPA0100
Isotherm SPA 40 Boiler 230V/1200W
Isotherm Spa 40 Boiler 230V/1200WThe Isotherm Boiler are available in 5 different sizes from 15 liters of up to 40 liters. According to the high marine quality standards, you have a stainless steel inside tank, a robust plastic container and a 6 bar safety valve.- High quality standard and an optimized price-performance ratio - Inside tank aisi 316 - Combined safety and setback valve- Extra thick line - Outside coat made of high -quality polypropylene - Adaptable with valves and the performance of the heating element - Water connections: 1/2 "inside and outside NPT and BSP pipe thread - Heating element 1200W / 230V
6P40B1SPA0003
Isotherm SPA 40 Boiler + Mixing Valve 230V/1200W
ISOTHERM SPA 40 Boiler + mixed valve 230V/1200WThe Isotherm Boiler are available in 5 different sizes from 15 liters of up to 40 liters. According to the high marine quality standards, you have a stainless steel inside tank, a robust plastic container and a 6 bar safety valve.- High quality standard and an optimized price-performance ratio - Inside tank aisi 316 - 6 bar safety valve - Extra thick line - including mixed valve - Outside coat made of high -quality polypropylene - Adaptable with valves and the performance of the heating element - Water connections: 1/2 "inside and outside NPT and BSP pipe thread - Heating element 1200W / 230V
PSU-18
Fohermo PSU charger 230V / 18V
With the 230V/18V PSU charger, you can also heat your Fathermo water boiler via the power grid. So you can also bridge long bad weather periods without having to do without warm water. The device serves as a mains speech AC/DC converter, which provides a regulated DC voltage for the hot water.
Technical specifications
Compatible with Fothermo 30l & 80l water boilerInput voltage area: 100-240V/ACMax. Current recording: 2.5AAC connector: IEC320-C14Output voltage: 18V/DCHeating power on the photovoltaic boiler: 140WAmbient temperature range: -10 ° C - +40 ° CScope of delivery:
1x fechermo psu charger 230V/18V (PSU-18)
10-13635-01
Johnson AQUA VOID ULTIMA Bilge Pump 500 GPH 12V
Johnson AQUA VOID ULTIMA bilge pump 500 GPH 12VIndustry's first and only cartridge pump with integrated wiring harness connection!
Flow rate: 38 liters per minuteVoltage: 12VHigh-flow impeller designWaterproof inline wiring harness connectionDurable thermoplastic housing design with removable motor carriageWaterproof motor, shaft made of stainless steel 316 and permanently lubricated double bearings;impact valves Straight or 90-degree Dura-Port outlets Molded T-slotClip-in basket
Johnson Pump's new line of bilge pumps with new technology and improved performance.With its industry-first high-speed motor connection and new reinforced click basket, it simplifies cleaning and installation and is convenient and efficient. Its improved motor ensures reliability and performance in all conditions. Experience carefree boating with Aqua Void.The bilge pump can be combined with either an AS888 automatic switch, an electronic float switch or the Ultima Switch for automatic operation.
Technical details:Power: 38L/minConnection: Straight/90°. 19mm hose connection including non-return valveVoltage: 12VCurrent consumption: 2.7AMaximum flow height: 3.0mWidth 2.75" (70mm)Height 4.69" (119mm)Length 5.24" (133mm)Weight 11.2oz (0.32kg) 500 GPH
10-13626-01
Johnson AQUA VOID Bilge Pump 500 GPH 12V
Johnson AQUA VOID bilge pump 500 GPH 12VIndustry's first and only cartridge pump with integrated wiring harness connection!
Flow rate: 38 liters per minuteVoltage: 12VHigh-flow impeller designWaterproof inline wiring harness connectionDurable thermoplastic housing design with removable motor sledWaterproof motor, shaft made of stainless steel 316 and permanently lubricated double bearings;impact valves Straight or 90-degree Dura-Port outlets Molded T-slotClip-in basket
Johnson Pump's new line of bilge pumps with new technology and improved performance.With its industry-first high-speed motor connection and new reinforced click basket, it simplifies cleaning and installation and is convenient and efficient. Its improved motor ensures reliability and performance in all conditions. Experience carefree boating with Aqua Void.The bilge pump can be combined with either an AS888 automatic switch, an electronic float switch or the Ultima Switch for automatic operation.
Technical details:Power: 38L/minConnection: Straight/90°. 19mm hose connection including non-return valveVoltage: 12VCurrent consumption: 2.7AMaximum flow height: 3.0mWidth 2.75" (70mm)Height 4.69" (119mm)Length 5.24" (133mm)Weight 11.2oz (0.32kg) 500 GPH
PVB-10
Fohermo photovoltaic water boiler 10 liters - hot water operators
With the 10L water boiler from Fothermo (MPN PVB-10) you can generate your hot water with sustainable and inexpensive solar power. The connection of the solar modules is done in a few seconds in a few simple steps and offers you a reliable hot water supply.
Product highlights
10 liters of photovoltaic hot water boilers
Warm water for the sink, the shower or the kitchen
No connection to the power grid required
Complete system with MC4 PV connections
No specialist required for the installation
Digital temperature display
1/2 "Water connection on the hot water.
Optional retrofitting via the power grid possible (power supply not included in the scope of delivery)
Recommended solar performance
We recommend the connection of a 150WP solar module
Connect modules with at least 100WP power and nominal voltage 18V
Connection of max. 3 x 325WP modules in parallel
Technical specifications
Volume: 10 liters
Max. Heating power: 550W
Max. Electricity: 15.5A
Protection class: IP X1
Dimensions: 280 x 280 x 440 mm
Weight: 7.2 kg
Scope of delivery:
1x fechermo 10 liters of hot water boiler (PVB-10)
1x fastening set
10-13626-05
Johnson AQUA VOID Bilge Pump 800 GPH 12V
Johnson AQUA VOID bilge pump 800 GPH 12VIndustry's first and only cartridge pump with integrated wiring harness connection!
Fördermenge: 50 Liter pro MinuteSpannung: 12VHigh-flow impeller designWaterproof inline wiring harness connectionDurable thermoplastic housing design with removable motor sledWaterproof motor, shaft made of stainless steel 316 and permanently lubricated double bearings;impact valves Straight or 90-degree Dura-Port outlets Molded T-slotClip-in basket
Johnson Pump's new line of bilge pumps with new technology and improved performance.With its industry-first high-speed motor connection and new reinforced click basket, it simplifies cleaning and installation and is convenient and efficient. Its improved motor ensures reliability and performance in all conditions. Experience carefree boating with Aqua Void.The bilge pump can be combined with either an AS888 automatic switch, an electronic float switch or the Ultima Switch for automatic operation.
Technical details:Power: 50L/minConnection: Straight/90°. 19mm hose connection including non-return valveVoltage: 12VCurrent consumption: 3.7AMaximum flow height: 4.4mWidth 2.75" (70mm)Height 4.69" (119mm)Length 5.24" (133mm)Weight 12.6oz (0.36kg) 800 GPH
10-24689-02
Johnson F4B-19 Impeller pump 24V
Johnson F4B-19 impeller pump 24V bilge pumpPower 48 L/min
Perfect for the use of bilge pumps, deck cleaning, water circulation, oil and diesel refueling during port service, etc. The engine also has built-in protection against thermal overload.
Housing: BronzeImpeller*: 09-824P-9Gasket: Lip sealConnection: Hose 1" /½" BSPLength: 202 mm - 8"Width: 120 mm - 4.72"Height: 90 mm - 3.54"Weight: 3 kg - 6.6 Ibs
*Enthält nitrile impeller