PVB-30
Fohermo photovoltaic water boiler 30 liters - hot water operators
With the 30l water boiler from Fothermo (MPN PVB-30) you can generate your hot water with sustainable and inexpensive solar power. The connection of the solar modules is done in a few seconds in a few simple steps and offers you a reliable hot water supply.
Product highlights
30 liters of photovoltaic hot water boilers
Warm water for the sink, the shower or the kitchen
No connection to the power grid required
Complete system with MC4 PV connections
No specialist required for the installation
Digital temperature display
1/2 "Water connection on the hot water.
Optional re -heating via the power grid possible (accessories not included in the scope of delivery)
Recommended solar performance
We recommend a solar module output of min. 300WP
Connect modules with at least 100WP power and nominal voltage 18V
Connection of max. 3 x 325WP modules in parallel
Danger:
The idle voltage of the solar modules must not exceed 42.4V. When using several modules, these must be switched in parallel, not in series
Technical specifications
Volume: 30 liters
Max. Heating power: 550W
Max. Electricity: 15.5A
Protection class: IP 24
Dimensions: 400 x 400 x 600 mm
Weight: 15 kg
Scope of delivery:
1x fechermo 30 liters of hot water boiler (PVB-30)
1x fastening set
1004-CPVB-10
Fohermo Photovoltaic Caravan water boiler 10 liters - hot water operators
With the 10l-Caravan water boiler from Fothermo (MPN 1004-CPVB-10) you can create your hot water with sustainable and inexpensive solar power. The connection of the solar modules is done in a few seconds in a few simple steps and offers you a reliable hot water supply. With the fastening set, a vertical but also horizontal application is possible.
Product highlights
10 liters of photovoltaic hot water boilers with fastening
Warm water for your caravan
No connection to the power grid required
Complete system with MC4 PV connections
No specialist required for the installation
Digital temperature display
1/2 "Water connection on the hot water.
Anti frost: easy to drain water possible in winter.
Recommended solar performance
We recommend the connection of a 100-300WP solar module
Connection of max. 5x1500WP modules in parallel.
Easy construction
The hanging bar is securely attached to the wall using two dowels supplied. After installing the wall attachment holder, the hot water tank is attached. After hanging, the hot water tank is attached to the wall with the help of the third dowel and the third screw (hexagon screw) by the eyelet at the bottom of the housing. A borehole template is included in the product.
Technical specifications
Volume: 10 liters
Max. Heating power: 550W
Max. Electricity: 15.5A
Protection class: IP X1
Dimensions: 280 x 280 x 440 mm
Weight: 7.2 kg
Scope of delivery:
1x fechermo 10 liters of hot water boiler (1004-cpvb-10)
1x fastening set
PVB-80
Fohermo photovoltaic water boiler 80 liters - hot water operators
With the 80l water boiler from Fothermo you can generate your hot water with sustainable and inexpensive solar power. The connection of the solar modules is done in a few seconds in a few simple steps and offers you a reliable hot water supply.
Product highlights
80 liters of photovoltaic hot water boilersWarm water for the sink, the shower or the kitchenNo connection to the power grid requiredComplete system with MC4 PV connectionsNo specialist required for the installationDigital temperature display1/2 ”water connection on the hot water.Optional re -heating via the power grid possible (accessories not included in the scope of delivery)Recommended solar performance
We recommend a solar module performance of min. 600WPFor example, connection of 2-4 x 370WP solar module in parallelMax. 1500WP solar module performanceDanger: The idle voltage of the solar modules must not exceed 42.4V. When using several modules, these must be switched in parallel, not in series.
Technical specifications
Volume: 80 litersMax. Heating power: 550WMax. Electricity: 15.5AProtection class: IP 24Dimensions: 470 x 480 x 900 mmWeight: 25 kgScope of delivery:
1x fechermo 80 liters of hot water boiler (PVB-80)
PSU-12
Fohermo PSU charger 230V / 12V
With the 230V/12V PSU charger, you can also heat your Fothermo water boiler via the power grid. So you can also bridge long bad weather periods without having to do without warm water.The device serves as a mains speech AC/DC converter, which provides a regulated DC voltage for the hot water.
Technical specifications
Compatible with Fothermo 10l water boilerInput voltage area: 100-240V/ACMax. Current recording: 2.5AAC connector: IEC320-C14Output voltage: 12V/DCHeating power on the photovoltaic boiler: 62WAmbient temperature range: -10 ° C - +40 ° CScope of delivery:
1x fechermo psu charger 230V/12V (PSU-12)
BC-03
Fothermo battery cable
With this battery cable, the Foshermo water boilers can be connected directly to a suitable battery and heated. This allows excess energy to be converted into heat in the boiler from photovoltaically charged batteries.The Fohermo boilers can be used with 12V and 24V batteries. Depending on the mode, the boiler either immediately uses the energy provided by the battery or the excess energy after the battery is fully charged.
Scope of delivery:
1x fechermo battery cable (BC-03)
18425
Elgena Hotwaterboiler Nautic-therm Typ EE 15 Liter, 230 V / 1000 W and 24V / 400 W
ISOTHERM SPA 40 Boiler + mixed valve 230V/1200WThe Isotherm Boiler are available in 5 different sizes from 15 liters of up to 40 liters. According to the high marine quality standards, you have a stainless steel inside tank, a robust plastic container and a 6 bar safety valve.- High quality standard and an optimized price-performance ratio - Inside tank aisi 316 - 6 bar safety valve - Extra thick line - including mixed valve - Outside coat made of high -quality polypropylene - Adaptable with valves and the performance of the heating element - Water connections: 1/2 "inside and outside NPT and BSP pipe thread - Heating element 1200W / 230V
6P40B1SPA0100
Isotherm SPA 40 Boiler 230V/1200W
Isotherm Spa 40 Boiler 230V/1200WThe Isotherm Boiler are available in 5 different sizes from 15 liters of up to 40 liters. According to the high marine quality standards, you have a stainless steel inside tank, a robust plastic container and a 6 bar safety valve.- High quality standard and an optimized price-performance ratio - Inside tank aisi 316 - Combined safety and setback valve- Extra thick line - Outside coat made of high -quality polypropylene - Adaptable with valves and the performance of the heating element - Water connections: 1/2 "inside and outside NPT and BSP pipe thread - Heating element 1200W / 230V
6P40B1SPA0003
Isotherm SPA 40 Boiler + Mixing Valve 230V/1200W
ISOTHERM SPA 40 Boiler + mixed valve 230V/1200WThe Isotherm Boiler are available in 5 different sizes from 15 liters of up to 40 liters. According to the high marine quality standards, you have a stainless steel inside tank, a robust plastic container and a 6 bar safety valve.- High quality standard and an optimized price-performance ratio - Inside tank aisi 316 - 6 bar safety valve - Extra thick line - including mixed valve - Outside coat made of high -quality polypropylene - Adaptable with valves and the performance of the heating element - Water connections: 1/2 "inside and outside NPT and BSP pipe thread - Heating element 1200W / 230V
18559
Elgena Hotwaterboiler Nautic-Compact Typ E 6liter, 24V / 400 W
ISOTHERM SPA 40 Boiler + mixed valve 230V/1200WThe Isotherm Boiler are available in 5 different sizes from 15 liters of up to 40 liters. According to the high marine quality standards, you have a stainless steel inside tank, a robust plastic container and a 6 bar safety valve.- High quality standard and an optimized price-performance ratio - Inside tank aisi 316 - 6 bar safety valve - Extra thick line - including mixed valve - Outside coat made of high -quality polypropylene - Adaptable with valves and the performance of the heating element - Water connections: 1/2 "inside and outside NPT and BSP pipe thread - Heating element 1200W / 230V
PSU-18
Fohermo PSU charger 230V / 18V
With the 230V/18V PSU charger, you can also heat your Fathermo water boiler via the power grid. So you can also bridge long bad weather periods without having to do without warm water. The device serves as a mains speech AC/DC converter, which provides a regulated DC voltage for the hot water.
Technical specifications
Compatible with Fothermo 30l & 80l water boilerInput voltage area: 100-240V/ACMax. Current recording: 2.5AAC connector: IEC320-C14Output voltage: 18V/DCHeating power on the photovoltaic boiler: 140WAmbient temperature range: -10 ° C - +40 ° CScope of delivery:
1x fechermo psu charger 230V/18V (PSU-18)
PSU-24
FOHERMO PSU charger 230V / 24V
With the 230V/24V PSU charger, you can also heat your Fothermo water boiler via the power grid. So you can also bridge long bad weather periods without having to do without warm water. The device serves as a mains speech AC/DC converter, which provides a regulated DC voltage for the hot water.
Technical specifications
Compatible with FOHERMO water boilerInput voltage area: 100-240V/ACMax. Current recording: 2.5AAC connector: IEC320-C14Output voltage: 24V/DCAmbient temperature range: -10 ° C - +40 ° CScope of delivery:
1x fechermo PSU charger 230V/24V (PSU-24)
PVB-10
Fohermo photovoltaic water boiler 10 liters - hot water operators
With the 10L water boiler from Fothermo (MPN PVB-10) you can generate your hot water with sustainable and inexpensive solar power. The connection of the solar modules is done in a few seconds in a few simple steps and offers you a reliable hot water supply.
Product highlights
10 liters of photovoltaic hot water boilers
Warm water for the sink, the shower or the kitchen
No connection to the power grid required
Complete system with MC4 PV connections
No specialist required for the installation
Digital temperature display
1/2 "Water connection on the hot water.
Optional retrofitting via the power grid possible (power supply not included in the scope of delivery)
Recommended solar performance
We recommend the connection of a 150WP solar module
Connect modules with at least 100WP power and nominal voltage 18V
Connection of max. 3 x 325WP modules in parallel
Technical specifications
Volume: 10 liters
Max. Heating power: 550W
Max. Electricity: 15.5A
Protection class: IP X1
Dimensions: 280 x 280 x 440 mm
Weight: 7.2 kg
Scope of delivery:
1x fechermo 10 liters of hot water boiler (PVB-10)
1x fastening set