USB Sockets
- News
- Complete Systems
- Batteries
- Electronics
- Installation
- Expansion
- Solar Technology
- Marken
Filter
–

Available (more than 10)
1297
Votronic USB loader panel S
Switch and safety panels for the on-board electrical system
Switch the electrical devices and secure circuits, put together individually according to their own wishes and mark them clean. These are the characteristics of these control and switching devices. Equipped with fuse machines, the annoying search for the right replacement protection has come to an end. The operational readiness is restored at the push of a button. Panels with a uniform height of 85 mm are offered for the Votronic module system that can be used as individual devices or in combination. The diverse application options allow the user to put together a complete information and operating center.
Security panel 4 s
Safety machines 6a, 8a, 10a, pre -wired to the group
1 safety machine 12a, individually damable
Suitable for 12V and 24V
Connection via flat connector
Optical trigger control
Other base on request
Front disk aperture S
Blind cover for already planned panels or to install your own components
Switch panel 4 s
4 switch on/off, 8a each resilient, with a control LED
Connection via screw terminals
Execution 12V or 24V
Switch panel 2x 16a s
2 single switch 2xum with flat plug connection
Resilience: 2x 8a / 1x 16a
Suitable for 12V or 24V
Main switch panel 20a S
Robust main switch with 20A overcurrent switch (automatic safety machine)
Thermally triggering, briefly overloadable for a short time
Triggering with more than 20a permanent current with the reversal of the switching rocker
Suitable for 12V and 24V
USB loader panel s
USB double-carer5V / 2.5A
Suitable for 12V and 24V
Switch panel 16a s
Individual switch 2xum with flat plug connection
Resilience: max. 2x 8a or 1x 16a
Suitable for 12V or 24V
STCKOSE PANEL S
For 12V consumers with DIN connector (ISO 4165), resilience 8a
Connection via flat connector
Device type
Art.-No.
Art.-No.marine
Operating voltage[V]
Dimensions(B x H X T)[mm]
Installation depth approx.[mm]
execution
Security panel 4 s
1285
-
12 and 24
47 x 85 x 75
70
A
Switch panel 4 s
1287
11287
12
47 x 85 x 25
20
B
Switch panel 4 / 24v s
6287
16287
24
47 x 85 x 25
20
B
Switch panel 16a s
1289
-
12 and 24
47 x 85 x 45
40
C
Switch panel 2x16a s
1291
-
12 and 24
47 x 85 x 45
40
D
STCKOSE PANEL S
1293
-
12 and 24
47 x 85 x 65
60
E
Main switch panel 20a S
1295
-
12 and 24
47 x 85 x 75
70
F
USB loader panel s
1297
-
12 and 24
47 x 85 x 42
38
G
Front disk aperture S
2019
-
-
47 x 85 x 3
-
H
Scope of delivery:
Flat plug, fastening screws, drilling template
An internationally understandable lettering sheet is available for the clean labeling of switches and fuses. This Pictogram film is transparent, self -adhesive and suitable for the vottronic front platform design.
1234567891011121314151617181920
Fresh water tankSewage tankFecal tankFuel tankTank insideTank outsideTank 1Tank 2Tank in generalTank heatingOn-board batteryStart batterySolar batteryBattery 1Battery 2lightingLighting kitchenLighting medical spaceLighting outer doorLighting storage space
2122232425262728293031323334353637383940
RefrigeratorHeatingboilerpumpfanfanradioTVVideo recorderSatellite receiverStove/microwaveElectrical levelElectrical awning12V socket24V socketAlarm in generalCarbon monoxide alarmGas alarmIce-exHeadlight
4142434445464748495051525354555657585960
Power supply unitVoltage converterAttention network voltageNetwork 230V12V equal voltage24V equal voltageAAOut ofOut ofOnOffphonefaxreserveLoadDistribution 1Distribution 2Addition (general)Main (general)
61626364656667686970
Fuse 4aFuse 5aSecurity 6aFuse 7aFuse 8aFuse 8aSecurity 10aSecurity 10aFuse 12aFuse 16a


Available (more than 10)
37335
tigerexped USB-C / USB-A Buck-Boost Ladegerät 100W "convertiger 100" mit oder ohne Einbaumaterial (Inprojal)
tigerexped USB-C / USB-A Buck-Boost Ladegerät 100W "convertiger 100" mit oder ohne Einbaumaterial (Inprojal)
Reisefahrzeuge sind in den meisten Fällen mit einer Bordnetz- / Aufbauspannung von 12V ausgestattet. Das Problem: Leistungsstarke Geräte, und gerade solche mit Schnelladeprotokollen, erfordern häufig eine höhere elektrische Leistung, sowohl in Bezug auf die Spannung als auch den Strom, als ein Standard-12V-Bordnetz normalerweise liefern kann. Hier kommen in der Regel nun Wechselrichter und Netzteile oder klobige Adapter zum Einsatz, die die Elektroinstallation unter Umständen unnötig aufwändig und teuer machen.
Der convertiger 100 löst dieses Problem ohne den Umweg über die Umwandlung in Wechselstrom. Dank Buck-Boost Converter erhöht er bei entsprechender Anforderung über Gerät und Kabel*, die 12V Eingangsspannung auf bis zu 20V / 5A (100W max.) am USB-C-Ausgang. Damit werden Schnelladeprotokolle wie Quick Charge oder Power Delivery endlich auch im 12-V System problemlos nutzbar.
Das Vermeiden eines Inverters spart außerdem wertvolle Stromreserven, denn dieser verbraucht nicht nur Energie im Standbybetrieb, sondern auch einen gewissen Prozentsatz der abgerufenen Leistung zur Transformation in den benötigten Wechselstrom.
Das Laden mit 100W ist abhängig von Faktoren wie der Anforderung über das zu ladende Gerät (augenblicklichen Ladezustand beachten), dem verwendeten Kabel, der Eingangsspannung und der Umgebungstemperatur. Verbaue das Ladegerät gut belüftet, denn bei zu hohen Temperaturen, wird die Leistung automatisch heruntergeregelt.
Liegt der Verbrauch eines Gerätes dauerhaft im 100W Bereich, sollte die Eingangsspannung bei 24V liegen. Im 12V System solltest du für diesen Anwendungsfall dem Betrieb über einen Wechselrichter den Vorzug geben.
Auto Licht-ausDie aktuelle Ladespannung wird mittels LED Anzeige für 20 Sekunden nach Einstecken des Ladekabels angezeigt. Nach dieser Zeit erlischt die Anzeige automatisch. Nach weiteren 10 Sekunden wird auch die Hintergrundbeleuchtung automatisch abgeschaltet. Die Ladedose verursacht damit kein Licht, das beim Einschlafen stört, oder unnötig (wenn auch minimal) Strom verbraucht.
Kompatibel mit Inprojal Einbau-ElementenUnsere Buck-Boost Ladedose passt in das Inprojal 20.000 Einbausortiment und fügt sich somit optisch nahtlos in die Ausstattung deines Fahrzeugs ein.
SpezifikationenEingangsspannung: DC 9-30VAusgangsleistung: max. 100W
KabelstärkenZum Einbau gelten folgende Richtlinien zu den zu verwendenden Kabelstärken:
* Die jeweils angegebenen Kabellängen entsprechen der Gesamtlänge aus Plus- und Minusleitung (Sicherungskasten - Ladegerät - Sicherungskasten).
Kabellänge*
12V
24V
4m
2,5 qmm
1,5 qmm
7m
4 qmm
2,5 qmm
10m
6 qmm
4 qmm
Wichtig zu wissen: Ladestandards
Es gibt verschiedene Schnellladeprotokolle auf der Welt, welche leider sehr heterogen am Markt implementiert werden. Vorreiter war eigentlich immer Apple mit einem Protokoll, das genau diese 2,4A implementierte, was von vielen anderen Herstellern übernommen wurde, inkl. Android-basierten Telefonen. Wir haben Diverse getestet, die problemlos schnell laden. Mittlerweile haben sich noch weitere Chiphersteller andere Protokolle überlegt, wie Qualcom mit QuickCharge oder auch PowerDelivery als übergreifender Standard. Letztlich hängt die Ladegeschwindigkeit also am Chip im Telefon, welcher dann der Dose mitteilt, was er auf welchem Wege unterstützt. Da wir leider noch nicht in einer komplett standardisierten Welt angekommen sind (sieht man schon am Kampf Mikro-USB vs. Lightning vs. USB.C), haben wir derzeit völlig wild verteilt alle 3 Standards im Markt. Da man nicht alles gleichzeitig implementieren kann, haben wir uns folgendermaßen aufgeteilt:
USB-A QC3.0USB-A Output : 5V/3A; 9V/2.22A; 12V/1.67A (20W Max)(QC3.0 Standard)USB-C PD3.0USB-C Output : 5V/3A; 9V/3A; 12V/3A; 15/3A; 20V/5A (100W Max)
Wir VERMUTEN, dass wir in Zukunft immer mehr Telefone sehen werden, die komplett zu PD3.0 wechseln werden, aber das ist noch Spekulation und wird einige Jahre dauern. Bis dahin haben wir o.g. Wildwuchs und es bleibt Glücksache, wo man mit welcher Geschwindigkeit laden kann. Wenn es nur für das eigene Fahrzeug mit eigenem Telefon ist, mag die eine Alibaba-Dose an der Stelle zufällig genau das Passende implementieren, wenn jemand dann mit einer nicht passenden Hardware ankommt, sieht es wieder schlecht aus. Ist leider eine unschöne Situation derzeit, liegt aber außerhalb unseres Einflussbereiches.
geringer Standby-Verbrauch:13V: 10,19mA = 0,132W26V: 6,93mA = 0,180W
Variants from €87.00*


Available (more than 10)
8-01-014905
Offgridtec USB double socket USB-A / USB-C 5V
The USB double socket from offgridtec offers you the option of using two normal USB connecting plugs or a USB-C connecting plug using a dual port. The USB cover ensures additional protection if the product is not used. This can also be removed from the socket. The double socket is suitable for use with assembly houses.
Characteristics:
Protection class: IP65Material: PlasticColor: BlackTension: 12-24V DCScope of delivery:
1x offgridtec USB double socket (2x USB-A and USB-C)


Small amount
37309
Scanstrut Flip Pro Multi 12V & Doppel-USB-C Kombi-Ladedose
Scanstrut Flip Pro Multi 12V & Doppel-USB-C Kombi-Ladedose, Kombination aus der leistungsstarken Flip Pro Max mit 2 x USB-C und 12V-Steckdose. Mit federbelastetem, wasserdicht nach IPX4 schließendem Deckel.
Flip Pro Max mit 2 x USB-C und Plip Pro mit 12V Steckdose in einer schönen Kombi-Lösung.Werden die Dosen nicht genutzt, halten die federbelasteten Kappen die Ladedosen fest verschlossen und schützen die Anschlüsse vor Staub, Schmutz und Wasser nach IPX4-Standard.Marinetaugliche Scanstrut-Qualität:IPX4 wasserdicht bei geschlossener AbdeckungUV-beständigScharnier und Feder aus Edelstahl 316
Lieferung inklusive Frontblenden-Kit
Elektrische Informationen zu Flip Pro Multi:120 -150W max. Leistung nur 12V-SystemSchnellladung (max. 60W) für bis zu 2 Geräte gleichzeitig
Eingangsspannung:USB-Ladegerät: 10-32V DC (12/24V System)12V-Steckdose: 10-15 V DC (12-V-System)Eingangsstrom max: 6A (10A-Sicherung empfohlen)
Wichtiger Hinweis: Verwende das mit Tablet, Telefon usw. mitgelieferte Kabel (C zu C oder C-Lighning), um die maximale Ladeleistung zu gewährleisten. Smartphones werden mit derselben Geschwindigkeit sowohl mit im 12V als auch im 24V-System geladen. Um die volle 60W-Leistung für Laptops zu erhalten, ist aber ein 24V-System erforderlich.
Elektrische Informationen:Eingangsstrom max: 6AEingangsspannung: 10 - 30V DCWassergeschützt: IPX4Artikelgewicht: 0,14kg


Small amount
SC-USB-03
Scanstrut ROKK Charge Pro USB Charger 1x USB-A / 1x USB-C / IPX6 / SC-USB-03
SCANSTRUT ROKK Charge Pro is designed with the latest charging technology - fast and efficient!
The innovative device features a unique design that charges up to 36W on 12V systems and an impressive 60W on 24V systems. This makes it the ideal solution for charging laptops via the USB-C port, getting them juiced up again with lightning fast speed.
But that's not all - ROKK Charge Pro is also twice as fast when charging larger tablets, so it's the perfect choice when charging an iPad Pro and iPhone at the same time.
Its sleek, ultra-compact design makes it perfect for where space is at a premium, and the click-lock lid ensures the USB port remains waterproof while in use.
ROKK Charge Pro is made from marine-grade materials and designed to withstand the harshest maritime conditions. Its IPX6 waterproof housing makes it completely wash-down ready and thus perfect for use on-board and in other marine environments.
Say goodbye to slow charging times and hello to ROKK Charge Pro - the ultimate onboard charger!
Scanstrut Ltd
582 Abonnenten
Sailing Zatara - Scanstrut ROKK Charge+ Waterproof USB Charge Socket (SC-USB-02)
Link kopieren
Ansehen auf
USB-C charging port
60 W max. at 24 V
36 W max. at 12 V
USB-A charging port
36 W max.
To keep up with the heavier power draws of modern electronic devices, you can easily retrofit or swap an existing USB charger with the ROKK Charge Pro, as the install cut-out matches those of standard USB sockets.
General features
Suitable for USB-A and USB-C charging cables
Fast charging with up to 60 W and up to 2 devices at the same time
Fast and easy installation thanks to standard hole diameter of 29 mm
Suitable for marine use
IPX6 waterproof even while charging
Anti-corrosion coated circuit board
UV resistant material
316 stainless hinge and spring
Electrical information
Input voltage: 10 - 30 V DC (12 / 24 V on-board systems)
Input current: max. 6A (10A fuse is recommended)
Standby power consumption: 0.01W
Important note
Use the charging cable that comes with your device (tablet, phone, action camera, etc.) to get maximum performance from this charger. Phones charge at the same rate on either a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast laptop charging.


Small amount
37308
Scanstrut Flip Pro wasserdichte 12V Steckdose
Scanstrut Flip Pro wasserdichte 12V Steckdose 150 Watt Leistung und mit federbelastetem Deckel wasser- und staubgeschützt nach IPX4-Standard. Die 12V Steckdose, neue Maßstäbe bei der Stromversorgung im Reisefahrzeug oder an Bord setzt. Sie verfügt über eine beeindruckende maximale Leistung von 150 W und hat einen federbelasteten Deckel.Bei Nichtgebrauch bleibt er fest verschlossen und schützt die Steckdose nach IPX4-Standard vor Staub, Schmutz und Wasser.Einbau:Einfache Installation mit einer Ø32mm (1,25") Lochsäge. Wird mit einem Frontblendensatz geliefert
Geeignet für marine Anwendung:Interne Anti-Korrosions-SchutzbeschichtungUV-beständigScharnier und Feder aus Edelstahl 316Wasserdicht nach IPX4 bei geschlossener Abdeckung
Elektrische Informationen:Eingangsspannung: 12V-SystemLeistung: 150WRote LED Arbeitsanzeigemax. Stromaufnahme: 6AEingangsspannung: 10 - 14V DCWassergeschützt:IPX4Standby-Verbrauch: 0,01WZertifizierung: CE, FCC, UKCA, C-Tick, ROHSBetriebsspannung: 12VLeistung max.: 150WArtikelgewicht: 0,08kg