The Pylontech US2000C (MPN US2000NB02V00201) is a lithium memory of the latest generation. The memory was specially developed to fully meet the high demands that are placed on a solar memory these days. The highest security and a long lifespan are guaranteed even with a regular discharge thanks to the latest technology. The latest battery from the market -leading manufacturer with 2.4KWH per module has again installed a battery management system (BMS) in every module and therefore offers a lot of security. Internally, the individual cells are monitored and balanced from overvoltage, over temperature, deep discharge, etc. The battery is compatible and certified with many available inverters. Characteristics Extremely cycle -proof - over 6000 cycles at 95% DOD More usable energy content than the previous US2000 model Lifespan over 10 years Absolutely self -confident lithium technology Compatible with many available inverters Automatic address setting when connecting to multi-groups High loading and discharge power possible Integrated BMS Very high storage density - low weight and compact design Simple installation thanks to modular design Absolutely maintenance -free and durable Built-in soft start function that is able to reduce the power when the inverter is started from the battery Dual active protection at BMS level Supports Wakeup from the RJ45 port with 5-12V signal Preliminary function to protect the ESS system from overvoltage function Battery management system in every module The battery management system integrated in each module is protected from harmful influences over the entire lifespan of the module and effectively prevents a premature defect from being prevented. Protection against: Low discharge and overload Overvoltage in the charge too high streams in load and discharge Over and under temperature Short-circuit and reel, Constant monitoring of the individual cell stresses (cell balance) Modular construction The system is modular and can be interpreted by combining several modules, fitting to the desired storage capacity. Each memory module consists of a highly powerful lithium iron phosphate (LIFEPO4) accumulator and an integrated BMS. High cycles of life The extremely high cycle life of the built-in Lifepo4 cells make pylontech US2000C modules for optimal storage solution for photovoltaic systems. Regardless of whether the solar system is a network-guided or an island system, the Pylontech memory offers some advantages over typical lead batteries and other lithium technologies. Technical specifications Battery type: lithium iron phosphate (lifepo4) Nominal voltage: 48V Nominal capacity: 50 Ah / 2.4 kWh Usable capacity (95% DOD): 47.5 AH / 2.28 kWh Discharging range: 44.5 - 53.5V Charging range: 52.5 - 53.5V Max. (Ent) charging current: 90a Communication: RS485, Can Weight: 24 kg Dimensions: 442 x 410 x 89 mm Protection class: IP20 Operating temperature range: 0 ° C - +50 ° C Temperature range Storage: -20 ° C - +60 ° C Lifespan: over 10 years Cycles life: over 6000 at 95% DOD BMS / monitoring: integrated in every module Guarantee: 10 years of manufacturer's guarantee Certification: IEC62619, CE, UN38.3 Due to the classification as a dangerous goods, this product is sent by forwarding agent! Scope of delivery: 1x Pylontech US2000C LIFEPO4 2.4 kWh 1x cable set in parallel connection including grounding 1x RJ45 data cable 1x assembly screws 1x operating instructions

Pytes e-box seriesThe new generation of LFP batteries for energy storage systems at home. It offers you a safe, well thought-out and powerful standard LFP battery package. The battery package is compact, easy to install, maintenance -free and can be used as a component of an energy storage system and expanded by a parallel circuit of further modules. There is broad application in home applications, small commercial and industrial energy storage systems as well as in telecommunications stations. It is the optimal addition to hybrid interverters and makes them and their house self -sufficient.Save a large part of the electricity from the sun instead of buying it from the network and use it whenever it is needed. As an emergency power supply, it provides electricity in the event of network failures.Intelligent energy management The sole production of energy is not enough. Rather, this must be used effectively and useful, which can be guaranteed by Dei E-Box-48100R. Intelligent algorythms optimize the system's lifespan. In addition, the electricity consumption can be measured, monitored and managed in real time. Far -reaching composiveness The E-Box-48100R is compatible with the 16 largest brands of interverters on the market. Technical specifications:Manufacturer guarantee 10 yearsBattery type LFP / LIFEPO4Electrical data:Nominal voltage 51.2 VVoltage area 47.5 - 57.6VNominal capacity 100 AhName energy 5.12 kWhCommunication RS232, RS485, CanMax. Discharge current/charging current 100 aStandard discharge flow/charging current 50 aPeak electricity 102a 15sCycle strength ≥6000 at 0.5c/0.5c 25 ° CLoading temperature 0 ~ +45 ℃Unloading temperature -10 ~ +50 ℃General data:  Dimensions (L*B*H) 440x620x117 mmWeight 51 kgScope of delivery:Memory batteryCable package with battery for battery cable plus and minus, earthing cable 1m  

Pytes e-box seriesThe new generation of LFP batteries for energy storage systems at home. It offers you a safe, well thought-out and powerful standard LFP battery package. The battery package is compact, easy to install, maintenance -free and can be used as a component of an energy storage system and expanded by a parallel circuit of further modules. There is broad application in home applications, small commercial and industrial energy storage systems as well as in telecommunications stations. It is the optimal addition to hybrid interverters and makes them and their house self -sufficient.Save a large part of the electricity from the sun instead of buying it from the network and use it whenever it is needed. As an emergency power supply, it provides electricity in the event of network failures.Intelligent energy management The sole production of energy is not enough. Rather, this must be used effectively and useful, which can be guaranteed by Dei E-Box-48100R. Intelligent algorythms optimize the system's lifespan. In addition, the electricity consumption can be measured, monitored and managed in real time. Far -reaching composiveness The E-Box-48100R is compatible with the 16 largest brands of interverters on the market. Technical specifications:Manufacturer guarantee 10 yearsBattery type LFP / LIFEPO4Electrical data:Nominal voltage 51.2 VVoltage area 47.5 - 57.6VNominal capacity 100 AhName energy 5.12 kWhCommunication RS232, RS485, CanMax. Discharge current/charging current 100 aStandard discharge flow/charging current 50 aPeak electricity 102a 15sCycle strength ≥6000 at 0.5c/0.5c 25 ° CLoading temperature 0 ~ +45 ℃Unloading temperature -10 ~ +50 ℃General data:  Dimensions (L*B*H) 440x620x117 mmWeight 51 kgScope of delivery:Memory batteryCable package with battery for battery cable plus and minus, earthing cable 1m  

In which Force-H2 power storage system from pylontech If it is a 96V high-voltage battery of the latest generation, which has the proven lithium iron phosphate storage technology. These accumulators are characterized above all, even with high performance, by a long service life and a high level of security. Due to a very good cycle resistance and high load limit, these battery stores are an ideal partner for a powerful photovoltaic system, which can load the memory several times a day.You can find a compatibility list for suitable inverters to pylontech batteries with over 30 brands and companies, including Victron Energy, Growatt, Solis and much more. Properties of the Force-H2 seriesLIFEPO4 storage technologyDual active protection at BMS levelHigh loading and discharge power possibleCycles life: over 6000 at 95% DODPreliminary function to protect the ESS system from overvoltage functionReliable performance thanks to durable componentsFlexibly expandableCompact and space -savingLifespan over 15 yearsCompatible with many available invertersSimple installation thanks to modular designFlexibly expandWith the Force -H2 series, the flexible configuration of the capacity appears. This can be expanded from 7.1 kWh to 14.2 kWh. The modular design is simple and therefore allows a simple, uncomplicated installation of the cables. Another progress of the new storage system is that, in contrast to other systems, no battery channels are required. Due to the versatile and space-saving use, the Force H2 series is suitable for a wide variety of application scenarios. High cycles of lifeThe extremely high cycle life of the built-in Lifepo4 cells make pylontech force-h2 modules for optimal storage solution for photovoltaic systems. Regardless of whether the solar system is a network-guided or an island system, the Pylontech memory offers some advantages over typical lead batteries and other lithium technologies. Optimally cover your own consumptionIn residential buildings, the energy requirements are higher in the morning and evening, while the solar energy generated only reaches the highest value at noon. The Pylontech's battery storage systems of the Pylontech series compensate for this difference between consumption and generation of electrical energy. Even a small battery memory with a capacity of up to 15 kWh can noticeably optimize your own consumption in a multi -person household and counteract the constantly increasing electricity costs. Larger memory enables a longer service life by targeted reduction in the discharge depth or increase the reserves in a cloudy day or power failure. Technical specificationsBattery type: lithium iron phosphate (lifepo4)Nominal voltage: 96V DCStorage capacity: 3552 WHCommunication: RS485, CanWeight: 35 kgDimensions: 450 x 296 x 296 mmProtection class: IP55Operating temperature range: 0 - +50 ° CTemperature range Storage: -20 ° C - +60 ° CGuarantee: 15 years of manufacturer's guaranteeCertification: VDE2510-50, IEC62619, IEC62477-1, IEC62040-1, CEC, CE, UN38.8Due to the classification as a dangerous goods, this product is sent by forwarding agent! Force-H2 LV control unitThe new Force H2 battery management system (BMS) from Pylontech is a control unit of the latest generation that protects each battery module of the FROCE-H2 series from adverse conditions and ensures safe and trouble-free continuous operation. It is irrelevant how many memory modules are in use at the same time. It is important that one BMS per tower is always used. A tower consists of at least 2 to a maximum of 4 Force-H2 3.55 kWh of battery modules, which can result in a capacity of 7.1-14.2 kWh. The Force-L2 BMS protects against:Low discharge and overloadOvervoltage in the chargetoo high streams in load and dischargeOver and under temperatureShort-circuit and reel,Intuitive control panel with LED displaysWith the control panel on the control unit, the current status of the battery tower can be checked at any time. In addition, the communication speed (Baud rate) can be set directly on the unit. Technical specifications:Dimensions: 450 x 296 x 190 mmWeight: 12 kgScope of delivery:2-4x pylontech Force-H2 3.55 kWh 96V memory (depending on the selection)1x Pylontech Force-H2 control unit BMS1x cable set in parallel connection including grounding1x RJ45 data cable1x assembly screws1x operating instructions

TheGrowatt ARK-2.5-A1 battery base is suitable for the installation of Growatt ARK batteries. This takes a safe stand of the battery tower. It is needed if the system cannot be installed on the wall. ARK battery systemThe Growatt ARK battery system is modular. Additional batteries can be stacked on top of each other. The ARK-2.5L-A1 has a capacity of 2.56 kWh and a maximum (discharge) current of 25a. The nominal voltage is 51.2 V and the operating voltage is between 47.2 V and 56.8 V. The lithium iron phosphate battery (LFP) is free of cobalt, which leads, for example, to a more cost -effective battery. The battery has a lifespan of over 6000 cycles.Dimensions: 80x350x260 mmWeight: 28 kgScope of delivery:1x Growatt ARK-2.5-A1 base

In whichForce-L2 power storage system from PylontechIf it is a 48V Niedervolt battery of the latest generation, which again has the proven lithium iron phosphate storage technology. The LIFEPO4 accumulators are characterized by a long service life and high security, even with high performance. The good cycle strength and high resilience make the battery memory an ideal partner for a powerful photovoltaic system, which can load the memory several times every day.A compatibility list for suitable inverter to Pylontech batteries with over 30 brands and company of the Pylontech Compatibility List Properties of the Force-L2 seriesLIFEPO4 storage technologyDual active protection at BMS levelHigh loading and discharge power possibleCyclical life: over 6000 at 90% DODPreliminary function to protect the ESS system from overvoltage functionReliable performance thanks to durable componentsFlexibly expandableCompact and space -savingLifespan over 15 yearsCompatible with many available invertersSimple installation thanks to modular designFlexibly expandIn addition to the remarkable customizable voltage of 44.5 - 53.5V, the flexible configuration of the capacity also appears. This can be expanded from 7.1 kWh to 14.2 kWh. The modular design is simple and therefore allows simply installation with uncomplicated connections to the cables. Another progress of the new storage system is that, in contrast to other systems, no battery channels are required. Due to the versatile and space-saving use, the Force L2 series is suitable for a wide variety of application scenarios. High cycles of lifeThe extremely high cycle life of the built-in Lifepo4 cells make pylontech force L2 modules for optimal storage solution for photovoltaic systems. Regardless of whether the solar system is a network-guided or an island system, the Pylontech memory offers some advantages over typical lead batteries and other lithium technologies. Optimally cover your own consumptionIn residential buildings, the energy requirements are higher in the morning and evening, while the solar energy generated only reaches the highest value at noon. The Pylontech's battery storage systems of the Pylontech series compensate for this difference between consumption and generation of electrical energy. Even a small battery memory with a capacity of up to 15 kWh can noticeably optimize your own consumption in a multi -person household and counteract the constantly increasing electricity costs. Larger memory enables a longer service life by targeted reduction in the discharge depth or increase the reserves in a cloudy day or power failure. Technical specificationsBattery type: lithium iron phosphate (lifepo4)Nominal voltage: 48VStorage capacity: 3550 WhDischarging range: 44.5 - 53.5VCommunication: RS485, CanWeight: 35.5 kgDimensions: 450 x 300 x 300 mmProtection class: IP55Temperature range charge: 0 ° C - +50 ° CTemperature range discharge: -10 ° C - +50 ° CTemperature range Storage: -20 ° C - +60 ° CGuarantee: 15 years of manufacturer's guaranteeCertification: VDE2510-50, IEC62619, IEC62040 CE, UN38.8Due to the classification as a dangerous goods, this product is sent by forwarding agent! Force-L2 LV control unitThe Force-L2 LV BMS from Pylontech is a control unit of the latest generation and protects each battery module of the Force L2 series from unfavorable conditions and thus ensures safe and failed continuous operation. It doesn't matter how many memory modules are in use. It is important that one BMS per tower is used. A tower consists of min. Two and Max. Four Force-L2 3.55KWH expansion modules, which results in a capacity of 7.1-14.2 kWh. The Force-L2 BMS protects:Low discharge and overloadOvervoltage in the chargetoo high streams in load and dischargeOver and under temperatureShort-circuit and reel,Intuitive control panel with LED displaysWith the control panel on the control unit, the current status of the battery tower can be checked at any time. In addition, the communication speed (Baud rate) can be set directly on the unit. Technical specifications:Dimensions: 450 x 296 x 296 mmWeight: 11.55 kgManufacturer number number: FC0048M-100SScope of delivery:2-4x pylontech Force-L2 3.55 kWh 48V memory (depending on the selection)1x Pylontech Force-L2 control unit LV BMS1x cable set in parallel connection including grounding1x RJ45 data cable1x assembly screws1x operating instructions

With theSolar flow presentsZendure As one of the first to connect a balcony power plant to a memory option. Thanks to the solar flow, the supply of solar energy via a mini-PV system is no longer limited to the day. The energy obtained is stored in the battery after consumers are supplyed and can also be used at night or in the case of little sunshine.At least one solar panel and a microwicor is required to use the solar flow. Characteristics:Dual MPPT-PV input-400W per tracker eachTotal capacity of 3,840Wh possible (modular extension)Compatible with 99% of all balcony power plantsIP65 waterproof protectionMonitoring and control possible via app10 years of manufacturer's guaranteeFunctionality:During the day, the energy generated by the PV modules is led to a microwicator via the PV hub and converted into alternating current to operate the devices in the house. Excess energy is intelligently stored in the battery in order to be able to use it at night. This enables savings of up to 32% on the annual electricity bill. Intelligent control ensures that the excess energy is saved efficiently, while the PV hub (with an adjustable range from 100W to 1200W) delivers 600W to the microw replacement in order to completely cover the electricity requirement during peak timesDuring the night, the excess energy that is stored in the battery (with the possibility to expand capacity up to 3840Wh) is used. The range of devices with a high wattage such as air conditioning systems and refrigerators to devices such as WLAN routers, lamps, laptops and many others ranges.Thanks to the universalMC4 connections are solar flow compatible with 99% of the balcony power plants. This includes popular brands such as Hymyiles, Deye, Priwatt etc. This seamless integration saves time and money, since existing balcony power plants can also be easily and quickly combined with the solar flow. Due to the compact, stackable design, little space is required for installation and the cabling is limited to a minimum. Waterproof protectionThe PowerHub and the batteries are protected by a robust metal surface and have protection class IP65 that offers complete protection against dust and water. The set can be installed inside and outside the living space. Zendure appWith the Zendure app you have the opportunity to monitor the solar flow and change settings. The information is displayed in real time, including weather and green electricity consumption in order to be able to make the optimal configuration for your system. The app is also possible with the app. Technical data PV-PowerHubRecommended input power PV modules: 210-550W (per tracker)DC input voltage: 16 - 60VMax. DC short-circuit current: 14.3 aNumber of MPP trackers: 2Max. Input current: 25 aNominal voltage: 48 VProtection class; IP65Communication: Bluetooth, 2.4 GHz WLANWeight: 4.7 kgDimensions: 363 x 246 x 64 mmTechnical data additional battery from 1000Capacity: 960Wh (20AH / 48V)Battery type: Lifepo4Max. Extension capacity: 4 x 960Wh = 3840 WhProtection class: IP65Weight: 11.5 kgDimensions: 350 x 200 x 186.5 mmScope of delivery:1x Solarflow PowerHub1x - 4x additional battery from 1000 (depending on the selection)1x 1.5m battery cable1x antenna1x 0.6m micro inverter cable2x 3m solar cableUser manual + guarantee certificate