Versand in 1-3 Werktagen
Delivery time: 1-3 working days!
- Charging programs no. 1, 2 and 4 (gel, AGM, acid) adjustable to battery type
- The charging voltage is peak-free and regulated in such a way that the batteries cannot be overcharged.
- Fully automatic continuous operation: The charger can be constantly connected to the battery and keeps it fully charged. In the event of a power failure, the batteries are not discharged (separation by safety switch).
- Twice a week lead-acid battery regeneration during long standstill periods to prevent harmful acid stratification.
- Parallel and buffer operation: If the battery is consumed at the same time, it continues to be charged or is kept full. The charging times are automatically calculated and monitored by the charger.
- Charging without supervision: Multiple protection against overload, overheating, overvoltage, short circuit, polarity reversal, malfunction and reverse battery discharge through electronic regulation up to complete separation of charger and battery through built-in safety switch.
- Connection for battery temperature sensor (temperature sensor 825 accessory, item no. 2001): With lead batteries (acid, gel, AGM), the charging voltage is automatically adjusted to the battery temperature, caused by cold better full charging of the weaker battery, unnecessary battery gassing and thus battery stress is avoided in summer temperatures.
- Silent run function: noise-optimized operation at the push of a button (night mode).
- Power pack function: Allows the consumers to be supplied without a battery (e.g. changing the battery).
- Charging cable compensation: voltage losses on the charging cables are automatically compensated.
- Built-in on-board network filter: Problem-free parallel operation with solar systems, wind and petrol generators, alternators, etc. on one battery.
- Charging aid for deeply discharged lead batteries: careful pre-charging of the (lead-acid, -gel, -AGM) battery up to 8 V, then powerful support for the battery if consumers are still switched on.
- Battery disconnection in the event of a power failure, overheating, malfunction (safety switch per charging output)
- Separate secondary charging output "S" for support and trickle charging of the vehicle starter battery
Also available in boat version with moisture-proof electronics!
Technical data
| Charging power in [V]/[A] | 24 / 16 |
| Nominal voltage (AC) in [V] | 230 |
| Operating voltage range (AC) in [V] | 190 - 265 (full charging power) |
| Power consumption (AC) in max.[W] | 520 |
| Sinusoidal power factor correction (CosPhi = 1) | yes |
| Nominal battery voltage (DC) in [V] | 24 |
| Battery capacity in [Ah] | 40 - 200 |
| Charging current in [A] | 16 |
| Side charge output "S" in [A] | 2 |
| charging curve | IU1oU2 |
| Voltage limitation for all charging types/programs [V] | 30 |
| Voltage ripple in [mV] rms | < 60 |
| Number of charge outputs | 1 + S |
| Device installation position | any |
| Temperature range [°C] | -20 to +45 |
| Degree/class of protection | I / IP 21 |
| Dimensions (WxHxD) in [mm] - Dimensions including mounting flanges/feet, without connections | 228x139x74mm |
| Weight in [g] | 1,400 |
| Standards (CE) | EN 60335-2-29 |
| Ambient conditions, humidity: max. 95% room humidity, non-condensing | |
| Scope of delivery: power cord, user manual | |