Sie können diesen Artikel auch in unserem neuen Shop www.frenchman-energy.de nach dem neuen § 12 Abs. 3 UstG beziehen, wenn Sie dafür berechtigt sind.
The Phoenix Smart Charger 24/25(1+1) IP43 from Victron Energy (MPN PSC242551085) is a powerful battery charger of the latest generation. The device is designed for 24V battery voltage and, in addition to the strong 25A main charging output, also offers an auxiliary charging output with 3A charging capacity for a starter battery.
The Phoenix Smart Charger 24/25(1+1) IP43 with the integrated Bluetooth module fits into the ever-growing Victron Smart family , which can be perfectly networked and centrally controlled in various ways. In addition to the Bluetooth module, there is also a VE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control battery temperature compensation. The tried-and-tested five-stage charging algorithm and the option of programming your own charging algorithm make the Phoenix Smart Charger 24/25(1+1) IP43 a universal high-tech battery charger that can optimally charge almost any type of battery.
Perfect battery charger for boats and vehicles
Phoenix Smart battery chargers, which (1+1) are included in the model name, have a main charging output with full charging current and a 3A auxiliary charging output for charging starter batteries . These models are therefore particularly suitable for the mobile sector. The Phoenix Smart models with (3) in the model designation were specially developed with regard to the needs of the marine sector and offer three full power outputs for charging 3 battery banks.
Highlights of the Phoenix Smart Charger 24/25(1+1) IP43
- built-in Bluetooth module
- integrated VE.Direct connectors
- 1x 25A main charging output and 1 additional auxiliary charging output for starter batteries
- automatic voltage compensation
- adaptive, five-stage loading algorithm
- variable constant voltage phase
- charges all common battery types optimally
- Prevention of gassing damage thanks to BatterySafe mode
- reduced aging through storage with storage mode
- also charges LiFePO4 batteries and can be connected to a BMS via optocoupler
- fully programmable loading algorithm
- Remote On/Off
- can be used as a power source
Technical characteristics of the Phoenix Smart 12/30(1+1)
- Victron part number: PSC242551085
- Number of battery banks: 1+1 (1 main output with full power + 1x starter battery (max.3A charge)
- maximum rated charging current: 25A, battery voltage: 24V
- high efficiency: 94%
- Protection class: IP43 (electronic components), IP22 (connection area)
- further data can be found in the technical data
Three integrated technologies for all-round healthy batteries
variable constant voltage phase: always delivers the right amount of charge
If the battery discharge is low (e.g. a yacht connected to shore power), a short constant voltage phase is selected to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged.
Preventing damage from excessive gassing: The BatterySafe mode
In order to shorten the charging time, the highest possible charging current was selected together with a high constant voltage. However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage increase once the gassing voltage has been reached (see also the graphs in the brochure).
Less maintenance and aging when the battery is idle: the storage mode
Storage mode is activated whenever there is no discharge within 24 hours. In storage mode, the float charge voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is increased to the gassing voltage level. This achieves a kind of equalization charge that prevents electrolyte stratification and sulfation - the two main reasons for premature battery failure.
Also perfect for LiFePO4 battery
The Phoenix Smart Charger 24/25(1+1) IP43 can be fitted with an on/off control by using a relay or an optocoupler output open collector from a Li-ion BMS to the remote on/off port. Alternatively, voltage and current can also be fully controlled via Bluetooth.
VE.Direct interface, bluetooth and programmable relay The Victron Phoenix Smart Charger 24/25(1+1) IP43 is thanks to the VE.Direct port for a wired data connection with a color control panel , a PC or other devices. Also note the VictronConnect app for Android and IOS, which you can use with any smartphone or tablet to wirelessly control and read out your Phoenix Charger via Bluetooth. Programmable relays can also be programmed via the VE.Direct interface or a Bluetooth-enabled device to trigger an alarm or other events. Required accessories Please note that an AC connection cable is required to connect the Phoenix Smart Charger 24/25(1+1) IP43 to the power grid. This is not included in the scope of delivery.You can find the right connection cable here: Scope of delivery 1x PSC242551085 Victron Phoenix Smart Charger 24/25(1+1) IP43 1x AC cable clamp 1x operating instructions Data sheet degree of protection IP IP43 communication ports Bluetooth, VeDirect EAN 8719076041924 manufacturer part number PSC241651085 Ambient temperature -20°C - +60°C battery voltage 24V Number of charge outputs 1 + 1 Battery type adjustable acid, gel, AGM, LiFePO4 charging curve adaptive battery management protective functions reverse polarity on battery, output short circuit, overtemperature Warranty 2 years temperature compensation Yes, via Smart Battery Sense humidity max95%, non-condensing manufacturer Victron Energy weight 3.6 kg Dimensions (LxWxH) 24.9 x 18 x 10 cm