Sie können diesen Artikel auch in unserem neuen Shop www.frenchman-energy.de nach dem neuen § 12 Abs. 3 UstG beziehen, wenn Sie dafür berechtigt sind.
The Phoenix Smart Charger 12/30(3) IP43 from Victron Energy is a powerful battery charger of the latest generation. The device is designed for 12V battery voltage and offers 3 charging outputs, each of which is able to supply the full charging current.
With the integrated Bluetooth module, the Phoenix Smart Charger 12/30(3) IP43 fits into the ever-growing Smart family from Victron, which can be perfectly networked and centrally controlled in various ways. In addition to the Bluetooth module, there is also a VE.Direct connection and a freely programmable relay. Optionally, the Smart Battery Sense can also be connected to control battery temperature compensation. The proven five-stage charging algorithm and the option of programming your own charging algorithm make the Phoenix Smart Charger 12/30(3) IP43 a universal high-tech battery charger that can optimally charge almost any type of battery.
Perfect battery charger for boats and vehicles
Phoenix Smart battery chargers, which (1+1) are included in the model name, have a main charging output with full charging current and a 3A auxiliary charging output for charging starter batteries. These models are therefore particularly suitable for the mobile sector. The Phoenix Smart models with (3) in the model designation were specially developed with the needs of the marine sector in mind and offer three full power outputs for charging three battery banks.
Highlights of the Phoenix Smart Charger 12/30(3) IP43
- built-in bluetooth module
- onboard VE.Direct connectors
- 3x 30A charging outputs are available (maximum 30A charging current)
- automatic voltage compensation
- adaptive five-step loading algorithm
- variable constant voltage phase
- charges all common battery types optimally
- Prevention of gassing damage thanks to BatterySafe mode
- reduced aging through storage with the storage mode
- also charges LiFePO4 batteries and can be connected to a BMS via optocoupler
- Fully programmable loading algorithm
- Remote On/Off
- can be used as a power source
Technical characteristics of the Phoenix Smart 12/30(1+1)
- Number of battery banks: 3 (each output can output the full charging power of the device)
- maximum rated charging current: 30A, battery voltage: 12V
- high efficiency: 94%
- Protection class: IP43 (electronic components), IP22 (connection area)
- further data can be found in the technical data
Three integrated technologies for all-round healthy batteries
variable constant voltage phase: always delivers the right amount of charge
When the battery discharge is low (e.g. a yacht connected to shore power), a short constant voltage phase is chosen to avoid overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged.
Preventing damage from excessive gassing: The BatterySafe mode
In order to shorten the charging time, the highest possible charging current was selected together with a high constant voltage.However, to avoid excessive gassing towards the end of the constant current phase, the charger limits the rate of voltage rise after the gassing voltage has been reached (see also the graphs in the brochure)
Less maintenance and aging when the battery is at rest: the storage mode
Storage mode is activated whenever there is no discharge within 24 hours. In storage mode, the float charge voltage is then lowered to 2.2V/cell (13.2V for a 24V battery) to minimize gassing and corrosion on the positive plates. Once a week the voltage is increased to the gassing voltage level. This achieves a type of equalization charge that prevents electrolyte stratification and sulfation - the two main causes of premature battery failure.
Also perfect for LiFePO4 battery
The Phoenix Smart Charger 12/30(3) IP43 can be fitted with on/off control by using a relay or an open collector optocoupler output from a Li-Ion BMS for remote on/off control port is connected. Alternatively, voltage and current can also be fully controlled via Bluetooth.
VE.Direct interface, bluetooth and programmable relay
The Victron Phoenix Smart Charger 12/30(3) IP43 is ideally suited for a wired data connection with a color control panel, a PC or other devices thanks to the VE.Direct port. Also note the VictronConnect app for Android and IOS, which you can use with any smartphone or tablet to wirelessly control and read out your Phoenix Charger via Bluetooth. The Programmable Relay can also be programmed to trigger an alarm or other events via the VE.Direct interface or a Bluetooth enabled device.
Required accessories
Please note that an AC connection cable is required to connect the Phoenix Smart Charger 12/30(3) IP43 to the power grid. This is not included in the scope of delivery.You can find the right connection cable here:
Scope of delivery
1x PSC123053095 Victron Phoenix Smart Charger 12/30(3) IP43
1x AC cable clamp
1x operating instructions
Specifications:
Input voltage: 230 VAC (range 210 – 250 V)
DC input voltage range: 290 – 355 VDC
Frequency: 45/-65 Hz
Power factor: 0.7
Return current draw: AC disconnected: < 0.1 mA AC connected and remote charger off: < 6 mA
Power consumption without load: 1 W
Efficiency: 12/30: 94% | 12/50: 92%
"Constant" charging voltage (absorption): Normal: 14.4 V High: 14.7 V Lithium Ion: 14.2v
'Float' charge voltage (float): Normal: 13.8V High: 13.8V Lithium Ion: 13.5V
Storage Mode: Normal: 13.2V High: 13.2V Lithium Ion: 13.5V
Fully programmable: Yes, with Bluetooth and/or VEDirect
House battery charging current: 30 / 50 A
Low current mode: 15 / 25 A
Starter battery charging current: 3 A
Loading algorithm: five-stage, adaptive
Protection: reverse polarity on battery (fuse, not accessible by user) / output short circuit / over temperature
Can be used as a power supply: Yes, output voltage can be adjusted with Bluetooth and/or VE.Direct.
Operating temperature range: -20 to 60? (0 - 140 F) Rated output current up to 40°C, degrading linearly to 20% at 60°C
humidity (non-condensing): max 95%
Relay (programmable): DC current rating: 5A up to 28VDC
housing norms