Sie können diesen Artikel auch in unserem neuen Shop www.frenchman-energy.de nach dem neuen § 12 Abs. 3 UstG beziehen, wenn Sie dafür berechtigt sind.
The RS Smart inverter is a powerful 48 VDC, 6 kVA and 230 VAC inverter. Thanks to its modern design and high-frequency technology, the inverter weighs only 11 kg and has excellent efficiency, low standby power and very quiet operation.
The inverter is equipped with a display to show battery and inverter details. These parameters can also be read out via Bluetooth from the VictronConnect app. In addition, the inverter features a VE.Can connector for connection to a GX device for system monitoring.
data sheet
DC input voltage range 38 - 62 V (4)
Output output voltage: 230 VAC ± 2%
Frequency: 50Hz ± 0.1% (1)
Continuous output power at 25°C Increases linearly from 4800 W at 46 VDC
to 5300 W at 52 VDC
Continuous output power at 40°C 4500 W
Continuous output power at 65°C 3000 W
Peak power 9 kW for 3 seconds
Short-circuit output current 50 A
Max. efficiency 96.5% at 1 kW load
94% at 5kW load
No load power 20W
CHARGER
Programmable charging voltage range (VDC) 36 – 60 V
Charge Voltage - Constant Voltage (VDC) Default setting: 57.6V (adjustable)V
Charge Voltage - Float (VDC) Default: 55.2 V (adjustable)
Maximum charging current 100A
Battery Temperature Sensor Yes
Battery Voltage Sensor Yes
GENERAL
Parallel connection and three-phase operation No
Programmable relay (3) Yes
Protection (2) a - g
Data communication ports VE.Direct port and VE.Can port
Bluetooth frequency 2402-2480MHz
Bluetooth power 4dBm
Multi-purpose analogue/digital connection Yes, 2x
Remote on/off switch Yes
Operating temperature range -40 to +65 °C (fan ventilation)
Humidity (non-condensing) max 95%
CASING
Material & Color Steel, blue RAL 5012
Protection class IP21
Battery connection M8 bolt
230 V AC connection screw terminals 13 mm² (6 AWG)
Weight 11kg
Dimensions (HxWxD) 425 x 440 x 125mm
STANDARDS
Safety EN-IEC 60335-1, EN-IEC 62109-1, EN-IEC 62109-2
emissions, immunity
EN55014-1, EN55014-2
EN-IEC 61000-3-2, EN-IEC 61000-3-3
IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
1) Can be adjusted to 60 Hz.
2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f)
230 VAC at inverter output g) Solar ground fault
3) Programmable relay that can be set for general alarm, DC under voltage or genset start/stop function. DC power: 4A up
to 35 VDC and 1 A up to 70 VDC
4) The minimum start-up voltage is 41V. The shutdown of the inverter can be set up to 32V DC, but may change at lower
Switch off the AC output voltage (due to the load). The over-voltage cutoff is 65.5V.