Measurement and Display Devices
-
News
- Complete Systems
- Batteries
- Electronics
- Installation
- Expansion
- Solar Technology
- Marken
Filter
–
Available (more than 10)
SHU050150050
Victron SmartShunt 500A/50mV battery monitor with Bluetooth
Smart battery monitoring
Victron Energy's SmartShunt 500A (MPN SHU050150050) is an all-in-one battery monitor. It connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, such as state of charge, remaining time, history information and much more. Settings can also be changed easily.
Alternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is required but less wiring and clutter is desired.
Characteristics
Equipped with Bluetooth
Check battery parameters conveniently on your smartphone or tablet
Can be connected to GX device
Additional input for additional monitoring options
uncomplicated installation
Differences to the BMV-712 battery monitor
No programmable visual and audible alarm
No programmable relay
Why is battery monitoring important?
Batteries are used in many areas, in most cases to store energy for later use. However, the battery itself does not display the amount of energy stored.
Battery life depends on many factors. The service life can be shortened by undercharging or overcharging, deep discharging, excessive charging or discharging currents and high ambient temperatures. By monitoring with a battery monitor, the user receives important feedback so that countermeasures can be taken to extend the battery life if necessary.
Scope of delivery:
1x SmartShunt
2x cables with fuse, for '+' connection and starter battery or midpoint connection
You will find the right connection cable for the negative pole at Frenchman Energy here and an automotive cone here at Frenchman Marine here and the KFZ cone here
data sheet
IP protection
IP21
weight
0.4kg
Manufacturer
VictronEnergy
Dimensions (LxWxH)
75x135x85mm
Manufacturer part number
SHU050150050
EAN
8719076044253
€130.68*
€158.75*
Small amount
PK21N-1-S
Simarine Pico One Paket - NEUE Version Silber
PICO one package
The package can monitor a battery bank and display a maximum of 2 displays for tank, voltage or temperatures. The package includes the shunt SC302T: 300A battery bank, 2 input voltages. This allows a battery bank and a tank to be monitored perfectly. The PICO one display cannot be expanded.
Battery monitor PICOone integrated Barometer, display of max.: 1 battery bank and max. 2 displays for tanks, voltages or temperatures.
Including shunt SC303 (300A shunt, 1 battery temperature, 2 voltages 0-75V, 2x resistance sensor 0-65kOhm (temperature or tank), WiFi and free app for Android and iOS. The package cannot be expanded
New version with two additional measuring inputs!
Technical specifications
Operating voltage
6-35V
Power consumption at 12V
Operating, wifi on, 100% illumination
90mA
Operating, wifi off, 70% illumination
35mA
Standby, wifi off, 0% illumination
18mA
Power off, logger still active
5mA
Max number of modules connected
20 (all SIMARINE shunts and modules)
Monitoring capabilities (PICO Display unit only)
Monitoring voltage
12V, 24V
Battery voltage
1
Monitoring capabilities (with SIMARINE shunts and modules)
Monitoring voltage
12V, 24V (SC300, SC500, ST107, SCQ25T)
12V, 24V, 48V, 60V, 72V(SC302T)
Battery banks with Real-Time Battery Health™
6
Battery voltages
6
Independent consumer or generator current channels:
20
Tanks Level or Temperature sensors:
14
€308.43*
€361.79*
BAM030712000
Victron Battery Monitor BMV-712 Smart
Victron BMV 712 Smart Battery Monitor
Precise monitoring:The main task of battery monitoring is to monitor the battery's state of charging in order to display unexpected complete discharges. For this purpose, the current flow is measured continuously and the current battery charging status is recorded. An alarm can be triggered when a set threshold value is reached. The ampère hours are determined by integrating the current flow into or from the battery. With constant current, the integration of the multiplication of electricity and time corresponds. For example, a discharge current of 10a over 2 hours results. a value of 20Ah. Victron battery guards are equipped with powerful, programmed microprocessors. In addition, it is equipped with an integrated Bluetooth module that allows you to access many functions and status reports of the battery computer via a free app.
Characteristics:
Numerous functions for battery monitoring and generously dimensioned electronics components on the Smart BMV board allow you insight into the life of your battery. In addition, with the help of the BMV, you can recognize and fix problems with the help of the BMV, even in larger batteries before damage.
- Programmable visual and acoustic alarm- Programmable relays to switch off the insignificant loads or switch on a generator if necessary.-A 500 amper rapid connection shunt and a connection set.- Shunt capacity of up to 10,000 amps can be selected- Ve.direct Communication connection, which can transmit a wide range of course data in order to be able to evaluate usage patterns and battery status- Additional input for the voltage measurement of a second battery, temperature or center voltage as well as associated alarm and relay settings- High -resolution measurement data of up to 2 batteries- Monitoring of the center
A damaged cell or a damaged battery can destroy a whole battery. If batteries are switched into series, a timely warning message can be created by measuring the center voltage. -The power consumption of the BMV is only 0.7 AH per month (1 ma) at 12 V and 0.6 AH per month (0.8 MA) at 24 V. In particular, lithium-ion batteries have almost no capacity, if you are discharged until switching off due to low voltage.
After switching off due to low voltage, the capacity reserve of a lithium-ion battery is around 1 AH per 1000 AH battery capacity. The battery is damaged when the remaining reserve capacity is removed from the battery. A residual current of 10 mA, for example, can damage a 200 AH battery if the system is left in the unloaded state for over 8 days.- Integrated Bluetooth: Networking, evaluation and configuration have never been as comfortable as today
- Free app VictronConnect: The VictronConnect App enables you to evaluate all Victron products with VE.Direct interface. Depending on the device, numerous parameters can be evaluated directly via the cell phone, computer or tablet. There are also opportunities for datalogging and data export.Wide input voltage area: 6.5 - 70VHigh current measuring resolution 10 MA (0.01 a)Electricity ± 0.01aVoltage ± 0.01 VAmperer hour ± 0.1 AhCharging status (0 - 100%) ± 0.1%Remaining term ± 1 minTemperature (0 - 50 ° C or 30 - 120 ° F) ± 1 ° C/° FAccuracy of the current measurement ± 0.4%Simplest installation:All electrical connections are carried out with the circuit board connector on the Strom-Shunt. The shunt is connected to the guard via a standard RJ12 telephone cable.
Scope of delivery:-Victron BMV Smart 712, battery monitor- Shunt 500 A / 50 MV-10 meters 6 ADDRITE UTP cable with RJ12 plugs, and cable with fuse for the ‘+’ connection- Safety ring for a back assembly and screws for a front-side assembly
€193.04*
€226.06*